If skb has retransmit data starting before start marker, e.g. ccs,
decrypted bit won't be set for that, and if it has some data to
encrypt, then it must be given to crypto ULD. So in place of
decrypted, check if socket is tls offloaded. Also, unless skb has
some data to encrypt, no need to give it for tls offload handling.

v2->v3:
- Removed ifdef.

Fixes: 5a4b9fe7 ("cxgb4/chcr: complete record tx handling")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This fixes a regression for blocking connects introduced by commit
4becb7ee ("net/x25: Fix x25_neigh refcnt leak when x25 disconnect").

The x25->neighbour is already set to "NULL" by x25_disconnect() now,
while a blocking connect is waiting in
x25_wait_for_connection_establishment(). Therefore x25->neighbour must
not be accessed here again and x25->state is also already set to
X25_STATE_0 by x25_disconnect().

Fixes: 4becb7ee ("net/x25: Fix x25_neigh refcnt leak when x25 disconnect")
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Reviewed-by: Xie He <xie.he.0141@gmail.com>
Link: https://lore.kernel.org/r/20201109065449.9014-1-ms@dev.tdt.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Since commit 71b77a7a ("enetc: Migrate to PHYLINK and PCS_LYNX") the
network port of the Kontron sl28 board is broken. After the migration to
phylink the device tree has to specify the in-band-mode property. Add
it.

Fixes: 71b77a7a ("enetc: Migrate to PHYLINK and PCS_LYNX")
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20201109110436.5906-1-michael@walle.ccSigned-off-by: Jakub Kicinski <kuba@kernel.org>

kmemleak report a memory leak as follows:

unreferenced object 0xffff88810a596800 (size 512):
  comm "ip", pid 21558, jiffies 4297568990 (age 112.120s)
  hex dump (first 32 bytes):
    00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00  .....N..........
    ff ff ff ff ff ff ff ff 00 83 60 b0 ff ff ff ff  ..........`.....
  backtrace:
    [<0000000022bbe21f>] tipc_topsrv_init_net+0x1f3/0xa70
    [<00000000fe15ddf7>] ops_init+0xa8/0x3c0
    [<00000000138af6f2>] setup_net+0x2de/0x7e0
    [<000000008c6807a3>] copy_net_ns+0x27d/0x530
    [<000000006b21adbd>] create_new_namespaces+0x382/0xa30
    [<00000000bb169746>] unshare_nsproxy_namespaces+0xa1/0x1d0
    [<00000000fe2e42bc>] ksys_unshare+0x39c/0x780
    [<0000000009ba3b19>] __x64_sys_unshare+0x2d/0x40
    [<00000000614ad866>] do_syscall_64+0x56/0xa0
    [<00000000a1b5ca3c>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

'srv' is malloced in tipc_topsrv_start() but not free before
leaving from the error handling cases. We need to free it.

Fixes: 5c45ab24 ("tipc: make struct tipc_server private for server.c")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20201109140913.47370-1-wanghai38@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Julian Wiedmann says:

====================
net/iucv: fixes 2020-11-09

One fix in the shutdown path for af_iucv sockets. This is relevant for
stable as well.
Also sending along an update for the Maintainers file.

v1 -> v2: use the correct Fixes tag in patch 1 (Jakub)
====================

Link: https://lore.kernel.org/r/20201109075706.56573-1-jwi@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

I am retiring soon. Thus this patch removes myself from the
MAINTAINERS file (s390 network).
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
[jwi: fix up the subject]
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

syzbot reported the following KASAN finding:

BUG: KASAN: nullptr-dereference in iucv_send_ctrl+0x390/0x3f0 net/iucv/af_iucv.c:385
Read of size 2 at addr 000000000000021e by task syz-executor907/519

CPU: 0 PID: 519 Comm: syz-executor907 Not tainted 5.9.0-syzkaller-07043-gbcf9877ad213 #0
Hardware name: IBM 3906 M04 701 (KVM/Linux)
Call Trace:
 [<00000000c576af60>] unwind_start arch/s390/include/asm/unwind.h:65 [inline]
 [<00000000c576af60>] show_stack+0x180/0x228 arch/s390/kernel/dumpstack.c:135
 [<00000000c9dcd1f8>] __dump_stack lib/dump_stack.c:77 [inline]
 [<00000000c9dcd1f8>] dump_stack+0x268/0x2f0 lib/dump_stack.c:118
 [<00000000c5fed016>] print_address_description.constprop.0+0x5e/0x218 mm/kasan/report.c:383
 [<00000000c5fec82a>] __kasan_report mm/kasan/report.c:517 [inline]
 [<00000000c5fec82a>] kasan_report+0x11a/0x168 mm/kasan/report.c:534
 [<00000000c98b5b60>] iucv_send_ctrl+0x390/0x3f0 net/iucv/af_iucv.c:385
 [<00000000c98b6262>] iucv_sock_shutdown+0x44a/0x4c0 net/iucv/af_iucv.c:1457
 [<00000000c89d3a54>] __sys_shutdown+0x12c/0x1c8 net/socket.c:2204
 [<00000000c89d3b70>] __do_sys_shutdown net/socket.c:2212 [inline]
 [<00000000c89d3b70>] __s390x_sys_shutdown+0x38/0x48 net/socket.c:2210
 [<00000000c9e36eac>] system_call+0xe0/0x28c arch/s390/kernel/entry.S:415

There is nothing to shutdown if a connection has never been established.
Besides that iucv->hs_dev is not yet initialized if a socket is in
IUCV_OPEN state and iucv->path is not yet initialized if socket is in
IUCV_BOUND state.
So, just skip the shutdown calls for a socket in these states.

Fixes: eac3731b ("[S390]: Add AF_IUCV socket support")
Fixes: 82492a35 ("af_iucv: add shutdown for HS transport")
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
[jwi: correct one Fixes tag]
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In the net core, the struct net_device_ops -> ndo_set_rx_mode()
callback is called with the dev->addr_list_lock spinlock held.

However, this driver's ndo_set_rx_mode callback eventually calls
lan743x_dp_write(), which acquires a mutex. Mutex acquisition
may sleep, and this is not allowed when holding a spinlock.

Fix by removing the dp_lock mutex entirely. Its purpose is to
prevent concurrent accesses to the data port. No concurrent
accesses are possible, because the dev->addr_list_lock
spinlock in the core only lets through one thread at a time.

Fixes: 23f0703c ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com>
Link: https://lore.kernel.org/r/20201109203828.5115-1-TheSven73@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When mv88e6xxx_fid_map return error, we lost free the table.

Fix it.

Fixes: bfb25542 ("net: dsa: mv88e6xxx: Add devlink regions")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhangxiaoxu <zhangxiaoxu5@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20201109144416.1540867-1-zhangxiaoxu5@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When net.ipv4.tcp_syncookies=1 and syn flood is happened,
cookie_v4_check or cookie_v6_check tries to redo what
tcp_v4_send_synack or tcp_v6_send_synack did,
rsk_window_clamp will be changed if SOCK_RCVBUF is set,
which will make rcv_wscale is different, the client
still operates with initial window scale and can overshot
granted window, the client use the initial scale but local
server use new scale to advertise window value, and session
work abnormally.

Fixes: e88c64f0 ("tcp: allow effective reduction of TCP's rcv-buffer via setsockopt")
Signed-off-by: Mao Wenan <wenan.mao@linux.alibaba.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/1604967391-123737-1-git-send-email-wenan.mao@linux.alibaba.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The RTL8401-internal PHY identifies as RTL8201CP, and the init
sequence in r8169, copied from vendor driver r8168, uses paged
operations. Therefore set the same paged operation callbacks as
for the other Realtek PHY's.

Fixes: cdafdc29 ("r8169: sync support for RTL8401 with vendor driver")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/69882f7a-ca2f-e0c7-ae83-c9b6937282cd@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 6f197fb6 ("lan743x: Added fixed link and RGMII support")
assumes that chips with an internal PHY will never have a devicetree
entry. This is incorrect: even for these chips, a devicetree entry
can be useful e.g. to pass the mac address from bootloader to chip:

    &pcie {
            status = "okay";

            host@0 {
                    reg = <0 0 0 0 0>;

                    #address-cells = <3>;
                    #size-cells = <2>;

                    lan7430: ethernet@0 {
                            /* LAN7430 with internal PHY */
                            compatible = "microchip,lan743x";
                            status = "okay";
                            reg = <0 0 0 0 0>;
                            /* filled in by bootloader */
                            local-mac-address = [00 00 00 00 00 00];
                    };
            };
    };

If a devicetree entry is present, the driver will not attach the chip
to its internal phy, and the chip will be non-operational.

Fix by tweaking the phy connection algorithm:
- first try to connect to a phy specified in the devicetree
  (could be 'real' phy, or just a 'fixed-link')
- if that doesn't succeed, try to connect to an internal phy, even
  if the chip has a devnode

Tested on a LAN7430 with internal PHY. I cannot test a device using
fixed-link, as I do not have access to one.

Fixes: 6f197fb6 ("lan743x: Added fixed link and RGMII support")
Tested-by: Sven Van Asbroeck <thesven73@gmail.com> # lan7430
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com>
Link: https://lore.kernel.org/r/20201108171224.23829-1-TheSven73@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The current NetLabel code doesn't correctly keep track of the netlink
dump state in some cases, in particular when multiple interfaces with
large configurations are loaded.  The problem manifests itself by not
reporting the full configuration to userspace, even though it is
loaded and active in the kernel.  This patch fixes this by ensuring
that the dump state is properly reset when necessary inside the
netlbl_unlabel_staticlist() function.

Fixes: 8cc44579 ("NetLabel: Introduce static network labels for unlabeled connections")
Signed-off-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/160484450633.3752.16512718263560813473.stgit@siflSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Iproute2 tc classifier terse dump has been accepted with modified syntax.
Update the tests accordingly.
Signed-off-by: Vlad Buslov <vlad@buslov.dev>
Fixes: e7534fd4 ("selftests: implement flower classifier terse dump tests")
Link: https://lore.kernel.org/r/20201107111928.453534-1-vlad@buslov.devSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The mptcp proto struct currently does not provide the
required limit for forward memory scheduling. Under
pressure sk_rmem_schedule() will unconditionally try
to use such field and will oops.

Address the issue inheriting the tcp limit, as we already
do for the wmem one.

Fixes: 9c3f94e1 ("mptcp: add missing memory scheduling in the rx path")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/37af798bd46f402fb7c79f57ebbdd00614f5d7fa.1604861097.git.pabeni@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

2.5 times faster would be 3.5 Gbps (4.375 Gbaud after 8b/10b encoding).
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20201107220822.1291215-1-j.neuschaefer@gmx.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

After updating userspace Ethtool from 5.7 to 5.9, I noticed that
NETDEV_FEAT_CHANGE is no more raised when changing netdev features
through Ethtool.
That's because the old Ethtool ioctl interface always calls
netdev_features_change() at the end of user request processing to
inform the kernel that our netdevice has some features changed, but
the new Netlink interface does not. Instead, it just notifies itself
with ETHTOOL_MSG_FEATURES_NTF.
Replace this ethtool_notify() call with netdev_features_change(), so
the kernel will be aware of any features changes, just like in case
with the ioctl interface. This does not omit Ethtool notifications,
as Ethtool itself listens to NETDEV_FEAT_CHANGE and drops
ETHTOOL_MSG_FEATURES_NTF on it
(net/ethtool/netlink.c:ethnl_netdev_event()).

From v1 [1]:
- dropped extra new line as advised by Jakub;
- no functional changes.

[1] https://lore.kernel.org/netdev/AlZXQ2o5uuTVHCfNGOiGgJ8vJ3KgO5YIWAnQjH0cDE@cp3-web-009.plabs.ch

Fixes: 0980bfcd ("ethtool: set netdev features with FEATURES_SET request")
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Link: https://lore.kernel.org/r/ahA2YWXYICz5rbUSQqNG4roJ8OlJzzYQX7PTiG80@cp4-web-028.plabs.chSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Jianlin reports that a bridged IPv6 VXLAN endpoint, carrying IPv6
packets over a link with a PMTU estimation of exactly 1350 bytes,
won't trigger ICMPv6 Packet Too Big replies when the encapsulated
datagrams exceed said PMTU value. VXLAN over IPv6 adds 70 bytes of
overhead, so an ICMPv6 reply indicating 1280 bytes as inner MTU
would be legitimate and expected.

This comes from an off-by-one error I introduced in checks added
as part of commit 4cb47a86 ("tunnels: PMTU discovery support
for directly bridged IP packets"), whose purpose was to prevent
sending ICMPv6 Packet Too Big messages with an MTU lower than the
smallest permissible IPv6 link MTU, i.e. 1280 bytes.

In iptunnel_pmtud_check_icmpv6(), avoid triggering a reply only if
the advertised MTU would be less than, and not equal to, 1280 bytes.

Also fix the analogous comparison for IPv4, that is, skip the ICMP
reply only if the resulting MTU is strictly less than 576 bytes.

This becomes apparent while running the net/pmtu.sh bridged VXLAN
or GENEVE selftests with adjusted lower-link MTU values. Using
e.g. GENEVE, setting ll_mtu to the values reported below, in the
test_pmtu_ipvX_over_bridged_vxlanY_or_geneveY_exception() test
function, we can see failures on the following tests:

             test                | ll_mtu
  -------------------------------|--------
  pmtu_ipv4_br_geneve4_exception |   626
  pmtu_ipv6_br_geneve4_exception |  1330
  pmtu_ipv6_br_geneve6_exception |  1350

owing to the different tunneling overheads implied by the
corresponding configurations.
Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes: 4cb47a86 ("tunnels: PMTU discovery support for directly bridged IP packets")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://lore.kernel.org/r/4f5fc2f33bfdf8409549fafd4f952b008bf04d63.1604681709.git.sbrivio@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Due to the legacy usage of hard_header_len for SIT tunnels while
already using infrastructure from net/ipv4/ip_tunnel.c the
calculation of the path MTU in tnl_update_pmtu is incorrect.
This leads to unnecessary creation of MTU exceptions for any
flow going over a SIT tunnel.

As SIT tunnels do not have a header themsevles other than their
transport (L3, L2) headers we're leaving hard_header_len set to zero
as tnl_update_pmtu is already taking care of the transport headers
sizes.

This will also help avoiding unnecessary IPv6 GC runs and spinlock
contention seen when using SIT tunnels and for more than
net.ipv6.route.gc_thresh flows.

Fixes: c5441932 ("GRE: Refactor GRE tunneling code.")
Signed-off-by: Oliver Herms <oliver.peter.herms@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20201103104133.GA1573211@twsSigned-off-by: Jakub Kicinski <kuba@kernel.org>

With CONFIG_BRIDGE=m the compilation fails:

    ld: drivers/net/ethernet/marvell/prestera/prestera_switchdev.o: in function `prestera_bridge_port_event':
    prestera_switchdev.c:(.text+0x2ebd): undefined reference to `br_vlan_enabled'

in case the driver is statically enabled.

Fix it by adding 'BRIDGE || BRIDGE=n' dependency.

Fixes: e1189d9a ("net: marvell: prestera: Add Switchdev driver implementation")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20201106161128.24069-1-vadym.kochan@plvision.euSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Saeed Mahameed says:

====================
mlx5 fixes 2020-11-03

v1->v2:
 - Fix fixes line tag in patch #1
 - Toss ktls refcount leak fix, Maxim will look further into the root
   cause.
 - Toss eswitch chain 0 prio patch, until we determine if it is needed
   for -rc and net.

* tag 'mlx5-fixes-2020-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5e: Fix incorrect access of RCU-protected xdp_prog
  net/mlx5e: Fix VXLAN synchronization after function reload
  net/mlx5: E-switch, Avoid extack error log for disabled vport
  net/mlx5: Fix deletion of duplicate rules
  net/mlx5e: Use spin_lock_bh for async_icosq_lock
  net/mlx5e: Protect encap route dev from concurrent release
  net/mlx5e: Fix modify header actions memory leak
====================

Link: https://lore.kernel.org/r/20201105202129.23644-1-saeedm@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

RTL8125B has same or similar short packet hw padding bug as RTL8168evl.
The main workaround has been extended accordingly, however we have to
disable also hw checksumming for short packets on affected new chip
versions. Instead of checking for an affected chip version let's
simply disable hw checksumming for short packets in general.

v2:
- remove the version checks and disable short packet hw csum in general
- reflect this in commit title and message

Fixes: 0439297b ("r8169: add support for RTL8125B")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/7fbb35f0-e244-ef65-aa55-3872d7d38698@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The caller of rtl8169_tso_csum_v2() frees the skb if false is returned.
eth_skb_pad() internally frees the skb on error what would result in a
double free. Therefore use __skb_put_padto() directly and instruct it
to not free the skb on error.

Fixes: b423e9ae ("r8169: fix offloaded tx checksum for small packets.")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/f7e68191-acff-9ded-4263-c016428a8762@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Alexei Starovoitov says:

====================
pull-request: bpf 2020-11-06

1) Pre-allocated per-cpu hashmap needs to zero-fill reused element, from David.

2) Tighten bpf_lsm function check, from KP.

3) Fix bpftool attaching to flow dissector, from Lorenz.

4) Use -fno-gcse for the whole kernel/bpf/core.c instead of function attribute, from Ard.

* git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf: Update verification logic for LSM programs
  bpf: Zero-fill re-used per-cpu map element
  bpf: BPF_PRELOAD depends on BPF_SYSCALL
  tools/bpftool: Fix attaching flow dissector
  libbpf: Fix possible use after free in xsk_socket__delete
  libbpf: Fix null dereference in xsk_socket__delete
  libbpf, hashmap: Fix undefined behavior in hash_bits
  bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE
  tools, bpftool: Remove two unused variables.
  tools, bpftool: Avoid array index warnings.
  xsk: Fix possible memory leak at socket close
  bpf: Add struct bpf_redir_neigh forward declaration to BPF helper defs
  samples/bpf: Set rlimit for memlock to infinity in all samples
  bpf: Fix -Wshadow warnings
  selftest/bpf: Fix profiler test using CO-RE relocation for enums
====================

Link: https://lore.kernel.org/r/20201106221759.24143-1-alexei.starovoitov@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The current logic checks if the name of the BTF type passed in
attach_btf_id starts with "bpf_lsm_", this is not sufficient as it also
allows attachment to non-LSM hooks like the very function that performs
this check, i.e. bpf_lsm_verify_prog.

In order to ensure that this verification logic allows attachment to
only LSM hooks, the LSM_HOOK definitions in lsm_hook_defs.h are used to
generate a BTF_ID set. Upon verification, the attach_btf_id of the
program being attached is checked for presence in this set.

Fixes: 9e4e01df ("bpf: lsm: Implement attach, detach and execution")
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201105230651.2621917-1-kpsingh@chromium.org

Pull mtd fixes from Miquel Raynal.

* 'mtd/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: rawnand: stm32_fmc2: fix broken ECC
  mtd: spi-nor: Fix address width on flash chips > 16MB
  mtd: spi-nor: Don't copy self-pointing struct around
  mtd: rawnand: ifc: Move the ECC engine initialization to the right place
  mtd: rawnand: mxc: Move the ECC engine initialization to the right place

Pull spi fix from Mark Brown:
 "This is an additional fix on top of 5e31ba0c ('spi: bcm2835: fix
  gpio cs level inversion') - when sending my prior pull request I had
  misremembred the status of that patch, apologies for the noise here"

* tag 'spi-fix-v5.10-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: bcm2835: remove use of uninitialized gpio flags variable

Pull sound fixes from Takashi Iwai:
 "Quite a bunch of small fixes that have been gathered since the last
  pull, including changes like below:

   - HD-audio runtime PM fixes and refactoring

   - HD-audio and USB-audio quirks

   - SOF warning fix

   - Various ASoC device-specific fixes for Intel, Qualcomm, etc"

* tag 'sound-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (26 commits)
  ALSA: usb-audio: Add implicit feedback quirk for Qu-16
  ASoC: mchp-spdiftx: Do not set Validity bit(s)
  ALSA: usb-audio: Add implicit feedback quirk for MODX
  ALSA: usb-audio: add usb vendor id as DSD-capable for Khadas devices
  ALSA: hda/realtek - Enable headphone for ASUS TM420
  ALSA: hda: prevent undefined shift in snd_hdac_ext_bus_get_link()
  ASoC: qcom: lpass-cpu: Fix clock disable failure
  ASoC: qcom: lpass-sc7180: Fix MI2S bitwidth field bit positions
  ASoC: codecs: wcd9335: Set digital gain range correctly
  ASoC: codecs: wcd934x: Set digital gain range correctly
  ALSA: hda: Reinstate runtime_allow() for all hda controllers
  ALSA: hda: Separate runtime and system suspend
  ALSA: hda: Refactor codec PM to use direct-complete optimization
  ALSA: hda/realtek - Fixed HP headset Mic can't be detected
  ALSA: usb-audio: Add implicit feedback quirk for Zoom UAC-2
  ALSA: make snd_kcontrol_new name a normal string
  ALSA: fix kernel-doc markups
  ASoC: SOF: loader: handle all SOF_IPC_EXT types
  ASoC: cs42l51: manage mclk shutdown delay
  ASoC: qcom: sdm845: set driver name correctly
  ...

Pull drm fixes from Dave Airlie:
 "It's Friday here so that means another installment of drm fixes to
  distract you from the counting process.

  Changes all over the place, the amdgpu changes contain support for a
  new GPU that is close to current one already in the tree (Green
  Sardine) so it shouldn't have much side effects.

  Otherwise imx has a few cleanup patches and fixes, amdgpu and i915
  have around the usual smattering of fixes, fonts got constified, and
  vc4/panfrost has some minor fixes. All in all a fairly regular rc3.

  We have an outstanding nouveau regression, but the author is looking
  into the fix, so should be here next week.

  I now return you to counting.

  fonts:
   - constify font structures.

  MAINTAINERS:
   - Fix path for amdgpu power management

  amdgpu:
   - Add support for more navi1x SKUs
   - Fix for suspend on CI dGPUs
   - VCN DPG fix for Picasso
   - Sienna Cichlid fixes
   - Polaris DPM fix
   - Add support for Green Sardine

  amdkfd:
   - Fix an allocation failure check

  i915:
   - Fix set domain's cache coherency
   - Fixes around breadcrumbs
   - Fix encoder lookup during PSR atomic
   - Hold onto an explicit ref to i915_vma_work.pinned
   - gvt: HWSP reset handling fix
   - gvt: flush workaround
   - gvt: vGPU context pin/unpin
   - gvt: mmio cmd access fix for bxt/apl

  imx:
   - drop unused functions and callbacks
   - reuse imx_drm_encoder_parse_of
   - spinlock rework
   - memory leak fix
   - minor cleanups

  vc4:
   - resource cleanup fix

  panfrost:
   - madvise/shrinker fix"

* tag 'drm-fixes-2020-11-06-1' of git://anongit.freedesktop.org/drm/drm: (55 commits)
  drm/amdgpu/display: remove DRM_AMD_DC_GREEN_SARDINE
  drm/amd/display: Add green_sardine support to DM
  drm/amd/display: Add green_sardine support to DC
  drm/amdgpu: enable vcn support for green_sardine (v2)
  drm/amdgpu: enable green_sardine_asd.bin loading (v2)
  drm/amdgpu/sdma: add sdma engine support for green_sardine (v2)
  drm/amdgpu: add gfx support for green_sardine (v2)
  drm/amdgpu: add soc15 common ip block support for green_sardine (v3)
  drm/amdgpu: add green_sardine support for gpu_info and ip block setting (v2)
  drm/amdgpu: add Green_Sardine APU flag
  drm/amdgpu: resolved ASD loading issue on sienna
  amdkfd: Check kvmalloc return before memcpy
  drm/amdgpu: update golden setting for sienna_cichlid
  amd/amdgpu: Disable VCN DPG mode for Picasso
  drm/amdgpu/swsmu: remove duplicate call to smu_set_default_dpm_table
  drm/i915: Hold onto an explicit ref to i915_vma_work.pinned
  drm/i915/gt: Flush xcs before tgl breadcrumbs
  drm/i915/gt: Expose more parameters for emitting writes into the ring
  drm/i915: Fix encoder lookup during PSR atomic check
  drm/i915/gt: Use the local HWSP offset during submission
  ...

Merge tag 'tpmdd-next-v5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd

Pull tpm fixes from Jarkko Sakkinen:
 "Two critical tpm driver bug fixes"

* tag 'tpmdd-next-v5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  tpm: efi: Don't create binary_bios_measurements file for an empty log
  tpm_tis: Disable interrupts on ThinkPad T490s

Pull iommu fixes from Joerg Roedel:

 - Fix a NULL-ptr dereference in the Intel VT-d driver

 - Two fixes for Intel SVM support

 - Increase IRQ remapping table size in the AMD IOMMU driver. The old
   number of 128 turned out to be too low for some recent devices.

 - Fix a mask check in generic IOMMU code

* tag 'iommu-fixes-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu: Fix a check in iommu_check_bind_data()
  iommu/vt-d: Fix a bug for PDP check in prq_event_thread
  iommu/vt-d: Fix sid not set issue in intel_svm_bind_gpasid()
  iommu/vt-d: Fix kernel NULL pointer dereference in find_domain()
  iommu/amd: Increase interrupt remapping table limit to 512 entries

Pull VFIO fixes from Alex Williamson:

 - Remove code by using existing helper (Zenghui Yu)

 - fsl-mc copy-user return and underflow fixes (Dan Carpenter)

 - fsl-mc static function declaration (Diana Craciun)

 - Fix ioeventfd sleeping under spinlock (Alex Williamson)

 - Fix pm reference count leak in vfio-platform (Zhang Qilong)

 - Allow opening IGD device w/o OpRegion support (Fred Gao)

* tag 'vfio-v5.10-rc3' of git://github.com/awilliam/linux-vfio:
  vfio/pci: Bypass IGD init in case of -ENODEV
  vfio: platform: fix reference leak in vfio_platform_open
  vfio/pci: Implement ioeventfd thread handler for contended memory lock
  vfio/fsl-mc: Make vfio_fsl_mc_irqs_allocate static
  vfio/fsl-mc: prevent underflow in vfio_fsl_mc_mmap()
  vfio/fsl-mc: return -EFAULT if copy_to_user() fails
  vfio/type1: Use the new helper to find vfio_group

Pull arm64 fixes from Will Deacon:
 "Here's the weekly batch of fixes for arm64. Not an awful lot here, but
  there are still a few unresolved issues relating to CPU hotplug, RCU
  and IRQ tracing that I hope to queue fixes for next week.

  Summary:

   - Fix early use of kprobes

   - Fix kernel placement in kexec_file_load()

   - Bump maximum number of NUMA nodes"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: kexec_file: try more regions if loading segments fails
  arm64: kprobes: Use BRK instead of single-step when executing instructions out-of-line
  arm64: NUMA: Kconfig: Increase NODES_SHIFT to 4

Pull ARC fixes from Vineet Gupta:

 - Unbork HSDKv1 platform (won't boot) due to memory map issue

 - Prevent stack unwinder from infinite looping

* tag 'arc-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: [plat-hsdk] Remap CCMs super early in asm boot trampoline
  ARC: stack unwinding: avoid indefinite looping

Pull s390 fixes from Heiko Carstens:

 - fix reference counting for ap devices

 - fix paes selftest

 - fix pmd_deref()/pud_deref() so they can also handle large pages

 - remove unused vdso file and defines

 - update defconfigs

 - call rcu_cpu_starting() early in smp init code to avoid lockdep
   warnings

 - fix hotplug of PCI function missing bus

* tag 's390-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/pci: fix hot-plug of PCI function missing bus
  s390/smp: move rcu_cpu_starting() earlier
  s390/pkey: fix paes selftest failure with paes and pkey static build
  s390: update defconfigs
  s390/vdso: remove unused constants
  s390/vdso: remove empty unused file
  s390/mm: make pmd/pud_deref() large page aware
  s390/ap: fix ap devices reference counting

Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.10-rc3, including fixes from wireless, can, and
  netfilter subtrees.

  Current merge window - bugs in new features:

   - can: isotp: isotp_rcv_cf(): enable RX timeout handling in
     listen-only mode

  Previous releases - regressions:

   - mac80211:
      - don't require VHT elements for HE on 2.4 GHz
      - fix regression where EAPOL frames were sent in plaintext

   - netfilter:
      - ipset: Update byte and packet counters regardless of whether
        they match

   - ip_tunnel: fix over-mtu packet send by allowing fragmenting even if
     inner packet has IP_DF (don't fragment) set in its header (when
     TUNNEL_DONT_FRAGMENT flag is not set on the tunnel dev)

   - net: fec: fix MDIO probing for some FEC hardware blocks

   - ip6_tunnel: set inner ipproto before ip6_tnl_encap to un-break gso
     support

   - sctp: Fix COMM_LOST/CANT_STR_ASSOC err reporting on big-endian
     platforms, sparse-related fix used the wrong integer size

  Previous releases - always broken:

   - netfilter: use actual socket sk rather than skb sk when routing
     harder

   - r8169: work around short packet hw bug on RTL8125 by padding frames

   - net: ethernet: ti: cpsw: disable PTPv1 hw timestamping
     advertisement, the hardware does not support it

   - chelsio/chtls: fix always leaking ctrl_skb and another leak caused
     by a race condition

   - fix drivers incorrectly writing into skbs on TX:
      - cadence: force nonlinear buffers to be cloned
      - gianfar: Account for Tx PTP timestamp in the skb headroom
      - gianfar: Replace skb_realloc_headroom with skb_cow_head for PTP

   - can: flexcan:
      - remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A
      - add ECC initialization for VF610 and LX2160A
      - flexcan_remove(): disable wakeup completely

   - can: fix packet echo functionality:
      - peak_canfd: fix echo management when loopback is on
      - make sure skbs are not freed in IRQ context in case they need to
        be dropped
      - always clone the skbs to make sure they have a reference on the
        socket, and prevent it from disappearing
      - fix real payload length return value for RTR frames

   - can: j1939: return failure on bind if netdev is down, rather than
     waiting indefinitely

  Misc:

   - IPv6: reply ICMP error if the first fragment don't include all
     headers to improve compliance with RFC 8200"

* tag 'net-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits)
  ionic: check port ptr before use
  r8169: work around short packet hw bug on RTL8125
  net: openvswitch: silence suspicious RCU usage warning
  chelsio/chtls: fix always leaking ctrl_skb
  chelsio/chtls: fix memory leaks caused by a race
  can: flexcan: flexcan_remove(): disable wakeup completely
  can: flexcan: add ECC initialization for VF610
  can: flexcan: add ECC initialization for LX2160A
  can: flexcan: remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A
  can: mcp251xfd: remove unneeded break
  can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci warnings
  can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read error messages
  can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is on
  can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrapping
  can: peak_usb: add range checking in decode operations
  can: xilinx_can: handle failure cases of pm_runtime_get_sync
  can: ti_hecc: ti_hecc_probe(): add missed clk_disable_unprepare() in error path
  can: isotp: padlen(): make const array static, makes object smaller
  can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only mode
  can: isotp: Explain PDU in CAN_ISOTP help text
  ...

Mimic the pre-existing ACPI and Device Tree event log behavior by not
creating the binary_bios_measurements file when the EFI TPM event log is
empty.

This fixes the following NULL pointer dereference that can occur when
reading /sys/kernel/security/tpm0/binary_bios_measurements after the
kernel received an empty event log from the firmware:

 BUG: kernel NULL pointer dereference, address: 000000000000002c
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 0 P4D 0
 Oops: 0000 [#1] SMP PTI
 CPU: 2 PID: 3932 Comm: fwupdtpmevlog Not tainted 5.9.0-00003-g629990edad62 #17
 Hardware name: LENOVO 20LCS03L00/20LCS03L00, BIOS N27ET38W (1.24 ) 11/28/2019
 RIP: 0010:tpm2_bios_measurements_start+0x3a/0x550
 Code: 54 53 48 83 ec 68 48 8b 57 70 48 8b 1e 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 48 8b 82 c0 06 00 00 48 8b 8a c8 06 00 00 <44> 8b 60 1c 48 89 4d a0 4c 89 e2 49 83 c4 20 48 83 fb 00 75 2a 49
 RSP: 0018:ffffa9c901203db0 EFLAGS: 00010246
 RAX: 0000000000000010 RBX: 0000000000000000 RCX: 0000000000000010
 RDX: ffff8ba1eb99c000 RSI: ffff8ba1e4ce8280 RDI: ffff8ba1e4ce8258
 RBP: ffffa9c901203e40 R08: ffffa9c901203dd8 R09: ffff8ba1ec443300
 R10: ffffa9c901203e50 R11: 0000000000000000 R12: ffff8ba1e4ce8280
 R13: ffffa9c901203ef0 R14: ffffa9c901203ef0 R15: ffff8ba1e4ce8258
 FS:  00007f6595460880(0000) GS:ffff8ba1ef880000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 000000000000002c CR3: 00000007d8d18003 CR4: 00000000003706e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  ? __kmalloc_node+0x113/0x320
  ? kvmalloc_node+0x31/0x80
  seq_read+0x94/0x420
  vfs_read+0xa7/0x190
  ksys_read+0xa7/0xe0
  __x64_sys_read+0x1a/0x20
  do_syscall_64+0x37/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

In this situation, the bios_event_log pointer in the tpm_bios_log struct
was not NULL but was equal to the ZERO_SIZE_PTR (0x10) value. This was
due to the following kmemdup() in tpm_read_log_efi():

int tpm_read_log_efi(struct tpm_chip *chip)
{
...
	/* malloc EventLog space */
	log->bios_event_log = kmemdup(log_tbl->log, log_size, GFP_KERNEL);
	if (!log->bios_event_log) {
		ret = -ENOMEM;
		goto out;
	}
...
}

When log_size is zero, due to an empty event log from firmware,
ZERO_SIZE_PTR is returned from kmemdup(). Upon a read of the
binary_bios_measurements file, the tpm2_bios_measurements_start()
function does not perform a ZERO_OR_NULL_PTR() check on the
bios_event_log pointer before dereferencing it.

Rather than add a ZERO_OR_NULL_PTR() check in functions that make use of
the bios_event_log pointer, simply avoid creating the
binary_bios_measurements_file as is done in other event log retrieval
backends.

Explicitly ignore all of the events in the final event log when the main
event log is empty. The list of events in the final event log cannot be
accurately parsed without referring to the first event in the main event
log (the event log header) so the final event log is useless in such a
situation.

Fixes: 58cc1e4f ("tpm: parse TPM event logs based on EFI table")
Link: https://lore.kernel.org/linux-integrity/E1FDCCCB-CA51-4AEE-AC83-9CDE995EAE52@canonical.com/Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-by: Kenneth R. Crudup <kenny@panix.com>
Reported-by: Mimi Zohar <zohar@linux.ibm.com>
Cc: Thiébaud Weksteen <tweek@google.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

There is a misconfiguration in the bios of the gpio pin used for the
interrupt in the T490s. When interrupts are enabled in the tpm_tis
driver code this results in an interrupt storm. This was initially
reported when we attempted to enable the interrupt code in the tpm_tis
driver, which previously wasn't setting a flag to enable it. Due to
the reports of the interrupt storm that code was reverted and we went back
to polling instead of using interrupts. Now that we know the T490s problem
is a firmware issue, add code to check if the system is a T490s and
disable interrupts if that is the case. This will allow us to enable
interrupts for everyone else. If the user has a fixed bios they can
force the enabling of interrupts with tpm_tis.interrupts=1 on the
kernel command line.

Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Removing the duplicate gpio chip select level handling in
bcm2835_spi_setup() left the lflags variable uninitialized. Avoid trhe
use of such variable by passing default flags to
gpiochip_request_own_desc().

Fixes: 5e31ba0c ("spi: bcm2835: fix gpio cs level inversion")
Signed-off-by: Martin Hundebøll <martin@geanix.com>
Link: https://lore.kernel.org/r/20201105090615.620315-1-martin@geanix.comSigned-off-by: Mark Brown <broonie@kernel.org>

Zero-fill element values for all other cpus than current, just as
when not using prealloc. This is the only way the bpf program can
ensure known initial values for all cpus ('onallcpus' cannot be
set when coming from the bpf program).

The scenario is: bpf program inserts some elements in a per-cpu
map, then deletes some (or userspace does). When later adding
new elements using bpf_map_update_elem(), the bpf program can
only set the value of the new elements for the current cpu.
When prealloc is enabled, previously deleted elements are re-used.
Without the fix, values for other cpus remain whatever they were
when the re-used entry was previously freed.

A selftest is added to validate correct operation in above
scenario as well as in case of LRU per-cpu map element re-use.

Fixes: 6c905981 ("bpf: pre-allocate hash map elements")
Signed-off-by: David Verbeiren <david.verbeiren@tessares.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201104112332.15191-1-david.verbeiren@tessares.net