- 27 Mar, 2024 8 commits
-
-
Dillon Varone authored
[Why&How} Some interfaces needed changes to support future architectures. Reviewed-by:
Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by:
Tom Chung <chiahsuan.chung@amd.com> Signed-off-by:
Dillon Varone <dillon.varone@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Dillon Varone authored
[Why&How] These additional callbacks to DC will be required for the DML2 wrapper. Also consolidate common callbacks for projects to a single location for maintenance. Reviewed-by:
-
Sung Joon Kim authored
[why&how] We need to remove the reference to these registers to prevent any usage in the future. Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by:
Sung Joon Kim <sungkim@amd.com> Tested-by:
-
Taimur Hassan authored
[Why] Previous patch to allow DTBCLK disable didn't address boot case. Driver thinks DTBCLK is disabled by default, so we don't send disable message to PMFW. DTBCLK is then enabled at idle desktop on boot, burning power. [How] Set dtbclk_en to true on boot so that disable message is sent during first commit. Fixes: 27750e17 ("drm/amd/display: Allow DTBCLK disable for DCN35") Reviewed-by:
Charlene Liu <charlene.liu@amd.com> Acked-by:
Taimur Hassan <syed.hassan@amd.com> Tested-by:
-
Natanel Roizenman authored
[WHY] Previously, we'd disabled HPO whenever an HPO display was disconnected. This caused other HPO displays to blank whenever one was unplugged. [HOW] This change restricts HPO enable/disable to dce110_apply_ctx_to_hw and adds a helper function (dce110_is_hpo_enabled) that returns true if any HPO displays are present in a context. We compare the current and previous dc ctx to check whether HPO is transitioning from on to off or vice versa, and adjust the HPO state accordingly. Reviewed-by:
Wenjing Liu <wenjing.liu@amd.com> Reviewed-by:
Chris Park <chris.park@amd.com> Acked-by:
Natanel Roizenman <natanel.roizenman@amd.com> Tested-by:
-
Sung Joon Kim authored
[why & how] There were some fixes in dcn35 that need to be ported over to dcn351 to prevent any regression. Signed-off-by:
Liu, Xi (Alex) <xiliu102@amd.com> Signed-off-by:
-
Hamza Mahfooz authored
We need to re-enable idle power optimizations after entering PSR. Since, we get kicked out of idle power optimizations before entering PSR (entering PSR requires us to write to DCN registers, which isn't allowed while we are in IPS). Fixes: a9b1a4f6 ("drm/amd/display: Add more checks for exiting idle in DC") Tested-by:
Mark Broadworth <mark.broadworth@amd.com> Reviewed-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Alvin Lee authored
[Why & How] There is a corner case where a single PSR panel fails to enter idle optimizations if the panel is not flipping (no planes or DPMS_OFF == true). This is because the panel will not enter PSR if it's not flipping, but this will prevent the FW idle opt path from being executed. To handle this case we will allow entry to idle opt from driver side even when a PSR panel is connected under the following scenarios: 1. Only a single PSR panel is connected 2. PSR panel is not flipping Reviewed-by:
Samson Tam <samson.tam@amd.com> Acked-by:
Alvin Lee <alvin.lee2@amd.com> Tested-by:
-
- 22 Mar, 2024 32 commits
-
-
Mario Limonciello authored
If the system hasn't entered GFXOFF when suspend starts it can cause hangs accessing GC and RLC during the suspend stage. Cc: <stable@vger.kernel.org> # 6.1.y: 5095d541 ("drm/amd: Evict resources during PM ops prepare() callback") Cc: <stable@vger.kernel.org> # 6.1.y: cb11ca32 ("drm/amd: Add concept of running prepare_suspend() sequence for IP blocks") Cc: <stable@vger.kernel.org> # 6.1.y: 2ceec37b ("drm/amd: Add missing kernel doc for prepare_suspend()") Cc: <stable@vger.kernel.org> # 6.1.y: 3a9626c8 ("drm/amd: Stop evicting resources on APUs in suspend") Cc: <stable@vger.kernel.org> # 6.6.y: 5095d541 ("drm/amd: Evict resources during PM ops prepare() callback") Cc: <stable@vger.kernel.org> # 6.6.y: cb11ca32 ("drm/amd: Add concept of running prepare_suspend() sequence for IP blocks") Cc: <stable@vger.kernel.org> # 6.6.y: 2ceec37b ("drm/amd: Add missing kernel doc for prepare_suspend()") Cc: <stable@vger.kernel.org> # 6.6.y: 3a9626c8 ("drm/amd: Stop evicting resources on APUs in suspend") Cc: <stable@vger.kernel.org> # 6.1+ Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3132 Fixes: ab475033 ("drm/amdgpu/sdma5.2: add begin/end_use ring callbacks") Reviewed-by:
Mario Limonciello <mario.limonciello@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
Reducing the size of ucode_prefix to 25 in the gfx_v11_0_init_microcode function. This would ensure that the total number of characters being written into fw_name does not exceed its size of 40. Fixes the below with gcc W=1: drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c: In function ‘gfx_v11_0_early_init’: drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:523:54: warning: ‘_pfp.bin’ directive output may be truncated writing 8 bytes into a region of size between 4 and 33 [-Wformat-truncation=] 523 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_pfp.bin", ucode_prefix); | ^~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:523:9: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 40 523 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_pfp.bin", ucode_prefix); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:540:54: warning: ‘_me.bin’ directive output may be truncated writing 7 bytes into a region of size between 4 and 33 [-Wformat-truncation=] 540 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_me.bin", ucode_prefix); | ^~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:540:9: note: ‘snprintf’ output between 15 and 44 bytes into a destination of size 40 540 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_me.bin", ucode_prefix); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:557:70: warning: ‘_rlc.bin’ directive output may be truncated writing 8 bytes into a region of size between 4 and 33 [-Wformat-truncation=] 557 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", ucode_prefix); | ^~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:557:25: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 40 557 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", ucode_prefix); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:569:54: warning: ‘_mec.bin’ directive output may be truncated writing 8 bytes into a region of size between 4 and 33 [-Wformat-truncation=] 569 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec.bin", ucode_prefix); | ^~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c:569:9: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 40 569 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec.bin", ucode_prefix); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CC [M] drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_clockpowergating.o Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Suggested-by:Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by:
-
Srinivasan Shanmugam authored
Reducing the size of ucode_prefix to 25 in the smu_v11_0_init_microcode function. we ensure that fw_name can accommodate the maximum possible string size Fixes the below with gcc W=1: drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/smu_v11_0.c: In function ‘smu_v11_0_init_microcode’: drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/smu_v11_0.c:110:54: warning: ‘.bin’ directive output may be truncated writing 4 bytes into a region of size between 0 and 29 [-Wformat-truncation=] 110 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix); | ^~~~ drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/smu_v11_0.c:110:9: note: ‘snprintf’ output between 12 and 41 bytes into a destination of size 36 110 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Suggested-by: -
Tao Zhou authored
Replace separate parameters with struct ta_ras_query_address_input. Signed-off-by:
Tao Zhou <tao.zhou1@amd.com> Reviewed-by:
Stanley.Yang <Stanley.Yang@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
The size of fw_name is increased to ensure that it can accommodate the maximum possible size of the string being written into it. Fixes the below with gcc W=1: drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c: In function ‘gfx_v9_0_early_init’: drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1255:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=] 1255 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_pfp.bin", chip_name); | ^~ ...... 1393 | r = gfx_v9_0_init_cp_gfx_microcode(adev, ucode_prefix); | ~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1255:9: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 30 1255 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_pfp.bin", chip_name); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1261:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=] 1261 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_me.bin", chip_name); | ^~ ...... 1393 | r = gfx_v9_0_init_cp_gfx_microcode(adev, ucode_prefix); | ~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1261:9: note: ‘snprintf’ output between 15 and 44 bytes into a destination of size 30 1261 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_me.bin", chip_name); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1267:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=] 1267 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_ce.bin", chip_name); | ^~ ...... 1393 | r = gfx_v9_0_init_cp_gfx_microcode(adev, ucode_prefix); | ~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1267:9: note: ‘snprintf’ output between 15 and 44 bytes into a destination of size 30 1267 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_ce.bin", chip_name); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1303:60: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=] 1303 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc_am4.bin", chip_name); | ^~ ...... 1398 | r = gfx_v9_0_init_rlc_microcode(adev, ucode_prefix); | ~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1303:17: note: ‘snprintf’ output between 20 and 49 bytes into a destination of size 30 1303 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc_am4.bin", chip_name); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1309:60: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=] 1309 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_kicker_rlc.bin", chip_name); | ^~ ...... 1398 | r = gfx_v9_0_init_rlc_microcode(adev, ucode_prefix); | ~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1309:17: note: ‘snprintf’ output between 23 and 52 bytes into a destination of size 30 1309 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_kicker_rlc.bin", chip_name); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1311:60: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=] 1311 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", chip_name); | ^~ ...... 1398 | r = gfx_v9_0_init_rlc_microcode(adev, ucode_prefix); | ~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1311:17: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 30 1311 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", chip_name); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1344:60: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=] 1344 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_sjt_mec.bin", chip_name); | ^~ ...... 1402 | r = gfx_v9_0_init_cp_compute_microcode(adev, ucode_prefix); | ~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1344:17: note: ‘snprintf’ output between 20 and 49 bytes into a destination of size 30 1344 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_sjt_mec.bin", chip_name); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1346:60: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=] 1346 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec.bin", chip_name); | ^~ ...... 1402 | r = gfx_v9_0_init_cp_compute_microcode(adev, ucode_prefix); | ~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1346:17: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 30 1346 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec.bin", chip_name); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1356:68: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=] 1356 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_sjt_mec2.bin", chip_name); | ^~ ...... 1402 | r = gfx_v9_0_init_cp_compute_microcode(adev, ucode_prefix); | ~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1356:25: note: ‘snprintf’ output between 21 and 50 bytes into a destination of size 30 1356 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_sjt_mec2.bin", chip_name); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1358:68: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=] 1358 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec2.bin", chip_name); | ^~ ...... 1402 | r = gfx_v9_0_init_cp_compute_microcode(adev, ucode_prefix); | ~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1358:25: note: ‘snprintf’ output between 17 and 46 bytes into a destination of size 30 1358 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec2.bin", chip_name); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Suggested-by: -
Srinivasan Shanmugam authored
The total size of the fw_name buffer is 8 (for "amdgpu/") + 30 (for ucode_prefix) + 5 (for "_pfp") + 5 (for "_wks") + 5 (for ".bin") = 53 characters. Fixes the below with gcc W=1: drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c: In function ‘gfx_v10_0_early_init’: drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:3982:58: warning: ‘%s’ directive output may be truncated writing up to 4 bytes into a region of size between 0 and 29 [-Wformat-truncation=] 3982 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_pfp%s.bin", ucode_prefix, wks); | ^~ drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:3982:9: note: ‘snprintf’ output between 16 and 49 bytes into a destination of size 40 3982 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_pfp%s.bin", ucode_prefix, wks); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:3988:57: warning: ‘%s’ directive output may be truncated writing up to 4 bytes into a region of size between 1 and 30 [-Wformat-truncation=] 3988 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_me%s.bin", ucode_prefix, wks); | ^~ drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:3988:9: note: ‘snprintf’ output between 15 and 48 bytes into a destination of size 40 3988 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_me%s.bin", ucode_prefix, wks); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:3994:57: warning: ‘%s’ directive output may be truncated writing up to 4 bytes into a region of size between 1 and 30 [-Wformat-truncation=] 3994 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_ce%s.bin", ucode_prefix, wks); | ^~ drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:3994:9: note: ‘snprintf’ output between 15 and 48 bytes into a destination of size 40 3994 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_ce%s.bin", ucode_prefix, wks); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:4001:62: warning: ‘_rlc.bin’ directive output may be truncated writing 8 bytes into a region of size between 4 and 33 [-Wformat-truncation=] 4001 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", ucode_prefix); | ^~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:4001:17: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 40 4001 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", ucode_prefix); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:4017:58: warning: ‘%s’ directive output may be truncated writing up to 4 bytes into a region of size between 0 and 29 [-Wformat-truncation=] 4017 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec%s.bin", ucode_prefix, wks); | ^~ drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:4017:9: note: ‘snprintf’ output between 16 and 49 bytes into a destination of size 40 4017 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec%s.bin", ucode_prefix, wks); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:4024:54: warning: ‘_mec2’ directive output may be truncated writing 5 bytes into a region of size between 4 and 33 [-Wformat-truncation=] 4024 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec2%s.bin", ucode_prefix, wks); | ^~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:4024:9: note: ‘snprintf’ output between 17 and 50 bytes into a destination of size 40 4024 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec2%s.bin", ucode_prefix, wks); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Suggested-by: -
Srinivasan Shanmugam authored
The snprintf function is used to write a formatted string into fw_name. The format of the string is "amdgpu/%s_mes%s.bin", where %s is replaced by the string in ucode_prefix and the second %s is replaced by either "_2" or "1" depending on the condition pipe == AMDGPU_MES_SCHED_PIPE. The length of the string "amdgpu/%s_mes%s.bin" is 16 characters plus the length of ucode_prefix and the length of the string "_2" or "1". The size of ucode_prefix is 30, so the maximum length of ucode_prefix is 29 characters (since one character is needed for the null terminator). Therefore, the maximum possible length of the string written into fw_name is 16 + 29 + 2 = 47 characters. The size of fw_name is 40, so if the length of the string written into fw_name is more than 39 characters (since one character is needed for the null terminator), it will be truncated by the snprintf function, and thus warnings will be seen. By increasing the size of fw_name to 50, we ensure that fw_name is large enough to hold the maximum possible length of the string, so the snprintf function will not truncate the output. Fixes the below with gcc W=1: drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c: In function ‘amdgpu_mes_init_microcode’: drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1482:66: warning: ‘%s’ directive output may be truncated writing up to 1 bytes into a region of size between 0 and 29 [-Wformat-truncation=] 1482 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin", | ^~ drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1482:17: note: ‘snprintf’ output between 16 and 46 bytes into a destination of size 40 1482 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1483 | ucode_prefix, | ~~~~~~~~~~~~~ 1484 | pipe == AMDGPU_MES_SCHED_PIPE ? "" : "1"); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1477:66: warning: ‘%s’ directive output may be truncated writing 1 byte into a region of size between 0 and 29 [-Wformat-truncation=] 1477 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin", | ^~ 1478 | ucode_prefix, 1479 | pipe == AMDGPU_MES_SCHED_PIPE ? "_2" : "1"); | ~~~ drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1477:17: note: ‘snprintf’ output between 17 and 46 bytes into a destination of size 40 1477 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1478 | ucode_prefix, | ~~~~~~~~~~~~~ 1479 | pipe == AMDGPU_MES_SCHED_PIPE ? "_2" : "1"); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1477:66: warning: ‘%s’ directive output may be truncated writing 2 bytes into a region of size between 0 and 29 [-Wformat-truncation=] 1477 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin", | ^~ 1478 | ucode_prefix, 1479 | pipe == AMDGPU_MES_SCHED_PIPE ? "_2" : "1"); | ~~~~ drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1477:17: note: ‘snprintf’ output between 18 and 47 bytes into a destination of size 40 1477 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes%s.bin", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1478 | ucode_prefix, | ~~~~~~~~~~~~~ 1479 | pipe == AMDGPU_MES_SCHED_PIPE ? "_2" : "1"); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1489:62: warning: ‘_mes.bin’ directive output may be truncated writing 8 bytes into a region of size between 4 and 33 [-Wformat-truncation=] 1489 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes.bin", | ^~~~~~~~ drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c:1489:17: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 40 1489 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mes.bin", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1490 | ucode_prefix); | ~~~~~~~~~~~~~ Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Suggested-by: -
Srinivasan Shanmugam authored
Reducing the size of ucode_prefix to 25 in the amdgpu_vcn_early_init function. This would ensure that the total number of characters being written into fw_name does not exceed its size of 40. Fixes the below with gcc W=1: drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c: In function ‘amdgpu_vcn_early_init’: drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c:102:66: warning: ‘snprintf’ output may be truncated before the last format character [-Wformat-truncation=] 102 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix); | ^ drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c:102:17: note: ‘snprintf’ output between 12 and 41 bytes into a destination of size 40 102 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c:102:66: warning: ‘snprintf’ output may be truncated before the last format character [-Wformat-truncation=] 102 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix); | ^ drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c:102:17: note: ‘snprintf’ output between 12 and 41 bytes into a destination of size 40 102 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c:105:73: warning: ‘.bin’ directive output may be truncated writing 4 bytes into a region of size between 2 and 31 [-Wformat-truncation=] 105 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_%d.bin", ucode_prefix, i); | ^~~~ drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c:105:25: note: ‘snprintf’ output between 14 and 43 bytes into a destination of size 40 105 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_%d.bin", ucode_prefix, i); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Suggested-by: -
Tao Zhou authored
And set the socket id. Signed-off-by:
-
Mukul Joshi authored
Destroy the high priority workqueue that handles interrupts during KFD node cleanup. Signed-off-by:
Mukul Joshi <mukul.joshi@amd.com> Reviewed-by:
Felix Kuehling <felix.kuehling@amd.com> Signed-off-by:
-
Jonathan Kim authored
Due to a CP interrupt bug, bad packet garbage exception codes are raised. Do a range check so that the debugger and runtime do not receive garbage codes. Update the user api to guard exception code type checking as well. Signed-off-by:
Jonathan Kim <jonathan.kim@amd.com> Tested-by:
Jesse Zhang <jesse.zhang@amd.com> Reviewed-by:
-
Harry Wentland authored
This causes flicker on a bunch of eDP panels. The info_packet code also caused regressions on other OSes that we haven't' seen on Linux yet, but that is likely due to the fact that we haven't had a chance to test those environments on Linux. We'll need to revisit this. This reverts commit 202260f6. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3207 Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3151Signed-off-by:
Harry Wentland <harry.wentland@amd.com> Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
-
Shashank Sharma authored
This patch adds a NULL check to fix this crash reported during the freeing of root PT entry: BUG: unable to handle page fault for address: ffffc9002d637aa0 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page RIP: 0010:amdgpu_vm_pt_free+0x66/0xe0 [amdgpu] PKRU: 55555554 Call Trace: <TASK> amdgpu_vm_pt_free_root+0x60/0xa0 [amdgpu] amdgpu_vm_fini+0x2cb/0x5d0 [amdgpu] ? amdgpu_ctx_mgr_entity_fini+0x53/0x1c0 [amdgpu] amdgpu_driver_postclose_kms+0x191/0x2d0 [amdgpu] drm_file_free.part.0+0x1e5/0x260 [drm] Cc: Christian König <Christian.Koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Felix Kuehling <felix.kuehling@amd.com> Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Acked-by:
Christian König <Christian.Koenig@amd.com> Signed-off-by:
Shashank Sharma <shashank.sharma@amd.com> Signed-off-by:
-
Eric Huang authored
TLB flush after unmap accidentially was removed on gfx9.4.2. It is to add it back. Signed-off-by:
Eric Huang <jinhuieric.huang@amd.com> Reviewed-by:
Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by:
-
Sunil Khatri authored
Refractor devcoredump code into new files since its functionality is expanded further and better to slit and devcoredump to have its own file. v2: Fix the build failure caught by arm compiler of implicit function declaration with #ifdef v3: squash in fix for implicit declaration error Cc: Ivan Lipski <ivan.lipski@amd.com> Acked-by:
Sunil Khatri <sunil.khatri@amd.com> Signed-off-by:
-
Aric Cyr authored
This version brings along following fixes: - Fix few problems for DCN35 - Fix a bug which dereferences freed memory - Enable new interface design for alternate scrambling - Enhance IPS handshake - Increase Z8 watermark times - Fix DML2 problem - Revert patch which cause regression - Fix problems for dmub idle power optimization Acked-by:
Wayne Lin <wayne.lin@amd.com> Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Tested-by:
-
Chaitanya Dhere authored
[Why & How] For DML2 to decouple it from other DML versions. Reviewed-by:
-
Wenjing Liu authored
[why] During minimal transition commit, the base state could be freed if it is current state. This is because after committing minimal transition state, the current state will be swapped to the minimal transition state and the old current state will be released. the release could cause the old current state's memory to be freed. However dc will derefernce this memory when release minimal transition state. Therefore, we need to retain the old current state until we release minimal transition state. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
Josip Pavic <josip.pavic@amd.com> Acked-by:
-
Peyton Lee authored
To fix mode2 reset failure. Should power on VPE when hw_init. Signed-off-by:
Peyton Lee <peytolee@amd.com> Reviewed-by:
Lang Yu <lang.yu@amd.com> Signed-off-by:
-
Lin.Cao authored
pp_dpm_*clk should be set as read only for SRIOV one VF mode, remove S_IWUGO flag and _store function of these debugfs in one VF mode. Signed-off-by:
Lin.Cao <lincao12@amd.com> Acked-by:
Jingwen Chen <Jingwen.Chen2@amd.com> Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] It was previously disabled for stability purposes, but command submission causes residency issues in IPS video playback. [How] Enable the disallow/reallow pattern back. There's additional checks now in DMCUB that should make this safer stability wise. Reviewed-by:
Duncan Ma <duncan.ma@amd.com> Acked-by:
-
Sung Joon Kim authored
[why & how] To enable a new interface so alternate scrambling can be done via security module. Reviewed-by:
Sung Joon Kim <sungjoon.kim@amd.com> Tested-by:
-
Xi Liu authored
[Why] The hard coded DPM states are only used to fix mismatch states numbers from FW. [How] Remove when not needed. Reviewed-by:
Xi Liu <xi.liu@amd.com> Tested-by:
-
Nicholas Kazlauskas authored
[Why] It's possible to skip parts of the eval and exit sequencing if we know whether DCN is in IPS2 already or if it's committed to going to idle and not in IPS2. [How] Skip IPS2 entry/exit if DMCUB is idle but the IPS2 commit is not set. Skip the eval delay if DMCUB is already in IPS2 since we know we need to exit. These are turned off by default. Reviewed-by:
-
Nicholas Kazlauskas authored
[Why] Cursor updates can be preempted by queued flips in some DMs. The synchronization model causes this to occur within the same thread at an intermediate level when we insert logs into the OS queue. Since this occurs on the same thread and we're still holding the lock (recursively) the cache is coherent. The exit sequence will run twice since we technically haven't finished the exit the first time, so we need a way to detect and avoid the reallow in the middle of this call to prevent the hang on the cursor update that was preempted. [How] Keep a counter that tracks the depth of the exit calls. Do not reallow until the counter is zero. Reviewed-by:
-
Xi Liu authored
[Why and how] Bounding box clocks for DCN351 should be increased as per request Reviewed-by:
Swapnil Patel <swapnil.patel@amd.com> Acked-by:
-
Chris Park authored
[Why] Disabling stream encoder invokes a function that no longer exists. [How] Check if the function declaration is NULL in disable stream encoder. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
-
Natanel Roizenman authored
Increase Z8 watermark times from 210->250us and 320->350us. Reviewed-by:
-
Charlene Liu authored
[why] APU has different refclk as dGPU which is used for AUX_DPHY setup Reviewed-by:
-
Yang Wang authored
add ras event id support for ACA. Signed-off-by:
Yang Wang <kevinyang.wang@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by:
-
Yang Wang authored
Because the UE Valid MCA count will only be cleared after reset, in order to avoid repeated counting of the error count, the aca bank is only updated once during ras isr. Signed-off-by:
-
Yang Wang authored
retrieve umc odecc error count for aca umc v12.0 Signed-off-by:
-
