Two libgcc headers were left around even though all the actual code
borrowed from libgcc is gone. Delete them.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

Move stuff in spi.c into ATSTK1002 board code and update SPI
platform device definitions according to the new GPIO API.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

The PIOE device was left out before because it muxes SDRAM pins (and
is therefore a bit dangerous to mess with) and because no existing
drivers had any use for it.

It is needed for CompactFlash, however, and now that we have a way
to protect the SDRAM pins, it can be safely added.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

at32_reserve_pin() can be used for reserving portmux pins without
altering their configuration. Useful for e.g. SDRAM pins where we
really don't want to change the bootloader-provided configuration.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

Leave the PIO lines as the bootloader left them. This allows us to
use PIOE without disturbing the SDRAM muxing.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

Arch-neutral GPIO calls for AVR32. GPIO IRQ support written by
David Brownell.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

A patch to use ARRAY_SIZE macro already defined in linux/kernel.h
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

dma_map_single() never fails, so dma_mapping_error() simply returns 0.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

Fix bug in dma_map_single(..., DMA_FROM_DEVICE) caused by incorrect
invalidation of shared cachelines at the beginning and/or end of
the specified buffer.  Those shared cachelines need to be flushed,
since they may hold valid data (which must not be discarded).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

Bugfixes for external irq handler set_irq_type():

 - If set_irq_type() can't set the type, don't change anything!

 - It's not OK to change the flow handler as part of set_irq_type(),
   among other issues that violates spinlock rules.  Instead, we can
   call the relevant handler when we demux the external interrupts.

 - The external irq demux has no need to grab the spinlock.  And in
   fact grabbing it that way was wrong, since that code might be
   pre-empted by an irq at a different priority level, and that code
   might then have tried to grab that spinlock...
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

Fixes to USART setup on the stk-1000 ... don't configure USART 2, since
its TXD/RXD are used for INT-A and INT-B buttons; and configure USART 0
(for IRDA, and with corrected IRQ) iff SW2 has a non-default setting.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

The /proc/interrupts file should also display the irq_chip associated
with each irq ... e.g. INTC, EIM, GPIO.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

  Remove a couple final references to the obsolete verify_area() call,
which was long ago replaced by access_ok().
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Acked-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/mfasheh/ocfs2: (22 commits)
  configfs: Zero terminate data in configfs attribute writes.
  [PATCH] ocfs2 heartbeat: clean up bio submission code
  ocfs2: introduce sc->sc_send_lock to protect outbound outbound messages
  [PATCH] ocfs2: drop INET from Kconfig, not needed
  ocfs2_dlm: Add timeout to dlm join domain
  ocfs2_dlm: Silence some messages during join domain
  ocfs2_dlm: disallow a domain join if node maps mismatch
  ocfs2_dlm: Ensure correct ordering of set/clear refmap bit on lockres
  ocfs2: Binds listener to the configured ip address
  ocfs2_dlm: Calling post handler function in assert master handler
  ocfs2: Added post handler callable function in o2net message handler
  ocfs2_dlm: Cookies in locks not being printed correctly in error messages
  ocfs2_dlm: Silence a failed convert
  ocfs2_dlm: wake up sleepers on the lockres waitqueue
  ocfs2_dlm: Dlm dispatch was stopping too early
  ocfs2_dlm: Drop inflight refmap even if no locks found on the lockres
  ocfs2_dlm: Flush dlm workqueue before starting to migrate
  ocfs2_dlm: Fix migrate lockres handler queue scanning
  ocfs2_dlm: Make dlmunlock() wait for migration to complete
  ocfs2_dlm: Fixes race between migrate and dirty
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6:
  Revert "Driver core: convert SPI code to use struct device"

* master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc: (116 commits)
  [POWERPC] Add export of vgacon_remap_base
  [POWERPC] Remove bogus comment about page_is_ram
  [POWERPC] windfarm: don't die on suspend thread signal
  [POWERPC] Fix comment in kernel/irq.c
  [POWERPC] ppc: Fix booke watchdog initialization
  [POWERPC] PPC: Use ARRAY_SIZE macro when appropriate
  [POWERPC] Use ARRAY_SIZE macro when appropriate
  [POWERPC] Fix ppc64's writing to struct file_operations
  [POWERPC] ppc: use syslog macro for the printk log level
  [POWERPC] ppc: cs4218_tdm remove extra brace
  [POWERPC] Add mpc52xx/lite5200 PCI support
  [POWERPC] Only use H_BULK_REMOVE if the firmware supports it
  [POWERPC] Fixup error handling when emulating a floating point instruction
  [POWERPC] Enable interrupts if we are doing fp math emulation
  [POWERPC] Added kprobes support to ppc32
  [POWERPC] Make pSeries use the H_BULK_REMOVE hypervisor call
  [POWERPC] Clear RI bit in MSR before restoring r13 when returning to userspace
  [POWERPC] Fix performance monitor exception
  [POWERPC] Compile fixes for arch/powerpc dcr code
  [POWERPC] Maple: use mmio nvram
  ...

* 'drm-patches' of master.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm: Allow for 44 bit user-tokens (or drm_file offsets)
  drm/via: Disable AGP DMA for chips with the new 3D engine.
  drm: update core memory manager from git drm tree
  drm: remove drm_ioremap and drm_ioremapfree
  i810/i830: use drm_core_ioremap instead of drm_ioremap
  drm: use vmalloc_user instead of vmalloc_32 for DRM_SHM
  via: allow for npot texture pitch alignment
  via: add some new chipsets
  via: some PCI posting flushes

Michal Ostrowski points out what the real problem was: the spaces at the
start of the definition of the 'checker-shell' make function.

Cc: Michal Ostrowski <mostrows@watson.ibm.com>
Acked-by: David Miller <davem@davemloft.net>
Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: Oleg Verych <olecom@flower.upol.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit 2943ecf2.

This should go through the SPI maintainer, it was my fault that it did
not.  Especially as it conflicts with other patches he has pending.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The following macro :
include/asm-powerpc/vga.h:#define VGA_MAP_MEM(x,s) (x + vgacon_remap_base)
is used by drivers/video/console/vgacon.c which can be compiled as a module
(drivers/video/vga16fb.ko).

Therefore, vgacon_remap_base should be exported.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>

arch/powerpc/mm/mem.c states that page_is_ram is called by the code that
implements /dev/mem, which isn't true.  Remove the comment.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

When the windfarm thread gets a suspend signal it will die instead of
freezing. This fixes it.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

kernel/irq.c contains a comment that speaks of -1 and -2 as interrupt
numbers, but this is actually dependent on configuration options now.
Replace by NO_IRQ and NO_IRQ_ENABLED.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Fix two problems in the book-e watchdog driver.

a) The 4xx default period was defined wrong
b) Clear status before enabling the watchdog exception
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Use ARRAY_SIZE macro already defined in linux/kernel.h
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Kumar Gala <galak@gate.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Use ARRAY_SIZE macro already defined in linux/kernel.h
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

In preparation for marking file_operations as const.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Use the appropriate logging macro for the priority level for that
printk call.
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

It looks like GNU make version 3.80 (but apparently not 3.81) adds
leading whitespace to the result of the checker-shell execution.  This
strips them off explicitly.

Also, don't bother symlinking the output file to /dev/null.  It's likely
as expensive as just writing the temp-file, and we need to remove it
anyway afterwards.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for_paulus' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into for-2.6.21

The previous patch changing pSeries to use H_BULK_REMOVE broke the
JS20 blade, where the firmware doesn't support H_BULK_REMOVE.  This
adds a firmware check so that on machines that don't have H_BULK_REMOVE,
we just use the H_REMOVE call as before.
Signed-off-by: Paul Mackerras <paulus@samba.org>

* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: (23 commits)
  ide-acpi support warning fix
  ACPI support for IDE devices
  IDE Driver for Delkin/Lexar/etc.. cardbus CF adapter
  ide: it8213 IDE driver update (version 2)
  ide: add it8213 IDE driver
  tc86c001: add missing __init tag for tc86c001_ide_init()
  tc86c001: mark init_chipset_tc86c001() with __devinit tag
  tc86c001: init_hwif_tc86c001() can be static
  ide: add Toshiba TC86C001 IDE driver (take 2)
  pdc202xx_new: remove check_in_drive_lists abomination
  pdc202xx_new: remove useless code
  slc90e66: carry over fixes from piix driver
  piix: tuneproc() fixes/cleanups
  piix: fix 82371MX enablebits
  hpt366: HPT36x PCI clock detection fix
  hpt366: init code rewrite
  hpt366: clean up DMA timeout handling for HPT370
  hpt366: merge HPT37x speedproc handlers
  hpt366: cache channel's MCR address
  hpt366: switch to using pci_get_slot
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (41 commits)
  Revert "PCI: remove duplicate device id from ata_piix"
  msi: Make MSI useable more architectures
  msi: Kill the msi_desc array.
  msi: Remove attach_msi_entry.
  msi: Fix msi_remove_pci_irq_vectors.
  msi: Remove msi_lock.
  msi: Kill msi_lookup_irq
  MSI: Combine pci_(save|restore)_msi/msix_state
  MSI: Remove pci_scan_msi_device()
  MSI: Replace pci_msi_quirk with calls to pci_no_msi()
  PCI: remove duplicate device id from ipr
  PCI: remove duplicate device id from ata_piix
  PCI: power management: remove noise on non-manageable hw
  PCI: cleanup MSI code
  PCI: make isa_bridge Alpha-only
  PCI: remove quirk_sis_96x_compatible()
  PCI: Speed up the Intel SMBus unhiding quirk
  PCI Quirk: 1k I/O space IOBL_ADR fix on P64H2
  shpchp: delete trailing whitespace
  shpchp: remove DBG_XXX_ROUTINE
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (70 commits)
  USB: remove duplicate device id from zc0301
  USB: remove duplicate device id from usb_storage
  USB: remove duplicate device id from keyspan
  USB: remove duplicate device id from ftdi_sio
  USB: remove duplicate device id from visor
  USB: a bit more coding style cleanup
  usbcore: trivial whitespace fixes
  usb-storage: use first bulk endpoints, not last
  EHCI: fix interrupt-driven remote wakeup
  USB: switch ehci-hcd to new polling scheme
  USB: autosuspend for usb printer driver
  USB Input: Added kernel module to support all GTCO CalComp USB InterWrite School products
  USB: Sierra Wireless auto set D0
  USB: usb ethernet gadget recognizes HUSB2DEV
  USB: list atmel husb2_udc gadget controller
  USB: gadgetfs AIO tweaks
  USB: gadgetfs behaves better on userspace init bug
  USB: gadgetfs race fix
  USB: gadgetfs simplifications
  USB: gadgetfs cleanups
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (28 commits)
  sysfs: Shadow directory support
  Driver Core: Increase the default timeout value of the firmware subsystem
  Driver core: allow to delay the uevent at device creation time
  Driver core: add device_type to struct device
  Driver core: add uevent vars for devices of a class
  SYSFS: Fix missing include of list.h in sysfs.h
  HOWTO: Add a reference to Harbison and Steele
  sysfs: error handling in sysfs, fill_read_buffer()
  kobject: kobject_put cleanup
  sysfs: kobject_put cleanup
  sysfs: suppress lockdep warnings
  Driver core: fix race in sysfs between sysfs_remove_file() and read()/write()
  driver core: Change function call order in device_bind_driver().
  driver core: Don't stop probing on ->probe errors.
  driver core fixes: device_register() retval check in platform.c
  driver core fixes: make_class_name() retval checks
  /sys/modules/*/holders
  USB: add the sysfs driver name to all modules
  SERIO: add the sysfs driver name to all modules
  PCI: add the sysfs driver name to all modules
  ...

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (116 commits)
  sk98lin: planned removal
  AT91: MACB support
  sky2: version 1.12
  sky2: add new chip ids
  sky2: Yukon Extreme support
  sky2: safer transmit timeout
  sky2: TSO support for EC_U
  sky2: use dev_err for error reports
  sky2: add Wake On Lan support
  fix unaligned exception in /drivers/net/wireless/orinoco.c
  Remove unused kernel config option DLCI_COUNT
  z85230: spinlock logic
  mips: declance: Driver model for the PMAD-A
  Spidernet: Rework RX linked list
  NET: turn local_save_flags() + local_irq_disable() into local_irq_save()
  NET-3c59x: turn local_save_flags() + local_irq_disable() into local_irq_save()
  hp100: convert pci_module_init() to pci_register_driver()
  NetXen: Added ethtool support for user level tools.
  NetXen: Firmware crb init changes.
  maintainers: add atl1 maintainers
  ...