`struct jr3_t` contains a single array member `block` of member type
`struct jr3_block`.  Rather than using pointers to `struct jr3_t`, just
use pointers to `struct jr3_block` instead and treat it as an array.
Replace the local variables `struct jr3_t __iomem *iobase` with `struct
jr3_block __iomem *block`.  Remove the definition of `struct jr3_t` as
it is no longer needed.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

`struct jr3_t` contains a single array member `block` of a tag-less
`struct` type.  Rename the tag-less `struct` type to `struct jr3_block`
and move its definition outside of `struct jr3_t`.  This will allow us
to use pointers of this type.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The term "channel" is overloaded in this driver.  Rename the `channel`
member of `struct jr3_t` to `block` to reduce confusion.  `block` is an
array of an anonymous `struct` type, with each element covering the
registers for one subdevice.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the `channel[x].data` member of `struct jr3_t` to
`channel[x].sensor` to match its type `struct jr3_sensor`.  Also rename
local variable `ch0data` in `jr3_pci_show_copyright()` to `sensor0` for
consistency.  It points to the `struct jr3_sensor` embedded in the
registers for "channel" 0.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The driver overloads the term "channel" a lot.  To help reduce
confusion, rename the `channel` member of `struct
jr3_pci_subdev_private` to `sensor` as it points to a `struct
jr3_sensor`.  Also rename the various function parameters and local
variables called `channel` that point to a `struct jr3_sensor` to
`sensor`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The driver overloads the term "channel" a lot.  To help reduce
confusion, rename `struct jr3_channel` to `struct jr3_sensor`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is no need to check if ret is non-zero, remove this
redundant check and just return the error status from the call
to mt9m114_write_reg_array.

Detected by CoverityScan, CID#1416577 ("Identical code for
different branches")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The previous statement checks if client is null, so the null check
when assigning dev is redundant and can be removed.

Detected by CoverityScan, CID#1416555 ("Logically Dead Code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some functions like kmalloc/kzalloc return NULL on failure.
When NULL represents failure, !x is commonly used.

This was done using Coccinelle:
@@
expression *e;
identifier l1;
@@

e = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\)(...);
...
- e == NULL
+ !e
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some functions like kmalloc/kzalloc return NULL on failure.
When NULL represents failure, !x is commonly used.

This was done using Coccinelle:
@@
expression *e;
identifier l1;
@@

e = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\)(...);
...
- e == NULL
+ !e
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some functions like kmalloc/kzalloc return NULL on failure.
When NULL represents failure, !x is commonly used.

This was done using Coccinelle:
@@
expression *e;
identifier l1;
@@

e = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\)(...);
...
- e == NULL
+ !e
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the odd './' usage in the Makefile to make the build output a bit
more sane looking and match the normal kernel build style.

Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These are not relevant to an upstream kernel driver.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is not used on either Baytrail or Cherrytrail so can simply be deleted
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The FWNAME define is never used so can be removed. The option to skip firmware
loading isn't really Cherrytrail specific so remove this and complete the
merging of the two driver versions for this file.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We can do this because the only thing it is used for is identifying the
platform for power management purposes. The driver only supports Baytrail
and Cherrytrail and both of those always need the IPU to be power managed
directly not via PCI D3 states.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We are not going to be building for anything but Linux so the code bracketed
by C_RUN is not used and not needed.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We are only going to be building for Linux with gcc, so we can lose bits of
material related to other build targets.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KLOCWORK is never defined so we can remove the workarounds for this in the
code.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is another define which is never used and references a header that doesn't
exist, so consider it dead. Our memcpy is pretty smart anyway.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes multiple assignments by factorizing them.
This was done with Coccinelle for the if branch. For the else part
the change was done manually. Braces were also added to the
else part to remove the checkpatch warning, "braces should be
on all arms of if-else statements".

@ identifier i1,i2; constant c; @@
- i1=i2=c;
+ i1=c;
+ i2=c;
Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove typdef phy_ofdm_rx_status_rxsc_sgien_exintfflag and replace its uses
in the code.
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace comparsions between three expressions using
two min macros with min3 macro. Done using Coccinelle
Script:

@@
expression e1;
expression e2;
expression e3;
@@
(
- min(min(e1, e2), e3)
+ min3(e1, e2, e3)
|
- min(e1, min(e2, e3))
+ min3(e1, e2, e3)
)
Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

TODO file contains task to verify and correct function return
sites. Need to check for and implement correct usage of goto's when
there is work to be done before returning.

Remove task from TODO list after already having completed audit of
directory drivers/staging/dgnc.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

TODO file requests fix up of error handling.

Audit dgnc_mgmt.c and fix all return paths to be uniform and inline
with kernel coding style.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

TODO file requests fix up of error handling.

Audit dgnc_mgmt.c and fix all return paths to be uniform and inline
with kernel coding style.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

TODO file requests fix up of error handling.

Audit dgnc_driver.c and fix all return paths to be uniform and inline
with kernel coding style.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM64 for core vchiq which is the core of vc04_services should
now be work complete.  The driver compiles without any errors
or warnings, and works just as well as 32 bit mode.  The
necessary compatibility wrappers for the 32 bit ioctls have been
written and merged.

Since no more ARM64 specific changes should be needed, perhaps
it's best to remove it from the TODO list.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch replaces NULL error values with error pointer values.
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch replaces kmalloc and memset with kzalloc
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds checks after memory allocation to avoid possible null
pointer dereferences.
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since all the arm64 specific issues have been fixed now
and the camera is working fine with a arm64 kernel, the
depends on ARM can be removed from Kconfig.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In debug logging code, the compiler is warning about imposible
situations and size of constants not matching the format specifier.

This change fixes all three instances of this.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The code that queries properties on the camera has a check
for buffer overruns if the firmware sends too much data.  This
check is incorrect, and during testing I was seeing stack corruption.

I believe this error can actually happen in normal use, just for
some reason it doesn't appear on 32 bit as often.  So perhaps
it's best for the check to be fixed.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The handle mapping code that converts context pointers to handles uses
a spinlock.  Since the btree implementation can sleep while allocating
memory, turning on several kernel debugging options will result in
errors in the log.

Since this code path is never called in atomic context, perhaps it's
better to just use a mutex.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The struct mmal_buffer_header has multiple fields used for informational
and debugging purposes.  These are safe to convert to u32.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The struct mmal_port has a few informational fields. Convert these to
u32.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The client_context field is passed around which is really just a pointer
to a msg_context.  A lookup table mechanism for msg_context was added
previously, so convert this field to a handle as well.

The firmware never interperates the client_context, just passed it back.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

A delayed buffer field is passed between the firmware and the
kernel.  This field is never used either so it's safe to
change it to a u32.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In the messages passed back and forth between the camera and
the firmware, a client_component field is passed.

This is a pointer to a structure that represents part of the
camera. Luckly, it's only used for debug logging, so simply
convert it to a u32.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>