- 17 Sep, 2018 8 commits
-
-
Mauro Carvalho Chehab authored
Instead of relying on a static map for pids, use the new sig_type "taint" type to setup the pipelines with the same tipe between different entities. Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Mauro Carvalho Chehab authored
Consumer devices are provided with a wide different range of types supported by the same driver, allowing different configutations. In order to make easier to setup media controller links, "taint" pads with the signal type it carries. While here, get rid of DEMOD_PAD_VBI_OUT, as the signal it carries is actually the same as the normal video output. The difference happens at the video/VBI interface: - for VBI, only the hidden lines are streamed; - for video, the stream is usually cropped to hide the vbi lines. Acked-by:
-
Mauro Carvalho Chehab authored
The signal there is the same as the video output (well, except for sliced VBI, but let's simplify the model and ignore it, at least for now - as it is routed together with raw VBI). Acked-by:
-
Mauro Carvalho Chehab authored
The v4l2-compliance tool complains if a video doesn't start with a zero sequence number. While this shouldn't cause any real problem for apps, let's make it happier, in order to better check the v4l2-compliance differences before and after patchsets. This is actually an old issue. It is there since at least its videobuf2 conversion, e. g. changeset 3829fadc461 ("[media] em28xx: convert to videobuf2"), if VB1 wouldn't suffer from the same issue. Cc: stable@vger.kernel.org Fixes: d3829fad ("[media] em28xx: convert to videobuf2") Signed-off-by: -
Mauro Carvalho Chehab authored
Instead of using a register value, use an AMUX name, as otherwise VIDIOC_G_AUDIO would fail. Cc: stable@vger.kernel.org Fixes: 766ed64d ("V4L/DVB (11827): Add support for Terratec Grabster AV350") Signed-off-by:
-
Mauro Carvalho Chehab authored
Follow the V4L2 spec, as warned by v4l2-compliance: warn: v4l2-test-formats.cpp(732): TRY_FMT cannot handle an invalid pixelformat. warn: v4l2-test-formats.cpp(733): This may or may not be a problem. For more information see: warn: v4l2-test-formats.cpp(734): http://www.mail-archive.com/linux-media@vger.kernel.org/msg56550.html Cc: stable@vger.kernel.org Fixes: bddcf633 ("V4L/DVB (9927): em28xx: use a more standard way to specify video formats") Signed-off-by:
-
Mauro Carvalho Chehab authored
The a->index is not the name of the internal amux entry, but, instead a value from zero to the maximum number of audio inputs. As the actual available inputs depend on each board, build it dynamically. This is broken for a really long time. On a quick check, since at least commit 195a4ef6 ("V4L/DVB (6585): Convert em28xx to video_ioctl2") this was not implemented right. Fixes: 195a4ef6 ("V4L/DVB (6585): Convert em28xx to video_ioctl2") Cc: stable@vger.kernel.org Signed-off-by:
-
Mauro Carvalho Chehab authored
The parameters of v4l2_ctrl_new_std_menu_items() are tricky: instead of the number of possible values, it requires the number of the maximum value. In other words, the ARRAY_SIZE() value should be decremented, otherwise it will go past the array bounds, as warned by KASAN: [ 279.839688] BUG: KASAN: global-out-of-bounds in v4l2_querymenu+0x10d/0x180 [videodev] [ 279.839709] Read of size 8 at addr ffffffffc10a4cb0 by task v4l2-compliance/16676 [ 279.839736] CPU: 1 PID: 16676 Comm: v4l2-compliance Not tainted 4.18.0-rc2+ #120 [ 279.839741] Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017 [ 279.839743] Call Trace: [ 279.839758] dump_stack+0x71/0xab [ 279.839807] ? v4l2_querymenu+0x10d/0x180 [videodev] [ 279.839817] print_address_description+0x1c9/0x270 [ 279.839863] ? v4l2_querymenu+0x10d/0x180 [videodev] [ 279.839871] kasan_report+0x237/0x360 [ 279.839918] v4l2_querymenu+0x10d/0x180 [videodev] [ 279.839964] __video_do_ioctl+0x2c8/0x590 [videodev] [ 279.840011] ? copy_overflow+0x20/0x20 [videodev] [ 279.840020] ? avc_ss_reset+0xa0/0xa0 [ 279.840028] ? check_stack_object+0x21/0x60 [ 279.840036] ? __check_object_size+0xe7/0x240 [ 279.840080] video_usercopy+0xed/0x730 [videodev] [ 279.840123] ? copy_overflow+0x20/0x20 [videodev] [ 279.840167] ? v4l_enumstd+0x40/0x40 [videodev] [ 279.840177] ? __handle_mm_fault+0x9f9/0x1ba0 [ 279.840186] ? __pmd_alloc+0x2c0/0x2c0 [ 279.840193] ? __vfs_write+0xb6/0x350 [ 279.840200] ? kernel_read+0xa0/0xa0 [ 279.840244] ? video_usercopy+0x730/0x730 [videodev] [ 279.840284] v4l2_ioctl+0xa1/0xb0 [videodev] [ 279.840295] do_vfs_ioctl+0x117/0x8a0 [ 279.840303] ? selinux_file_ioctl+0x211/0x2f0 [ 279.840313] ? ioctl_preallocate+0x120/0x120 [ 279.840319] ? selinux_capable+0x20/0x20 [ 279.840332] ksys_ioctl+0x70/0x80 [ 279.840342] __x64_sys_ioctl+0x3d/0x50 [ 279.840351] do_syscall_64+0x6d/0x1c0 [ 279.840361] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 279.840367] RIP: 0033:0x7fdfb46275d7 [ 279.840369] Code: b3 66 90 48 8b 05 b1 48 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 81 48 2d 00 f7 d8 64 89 01 48 [ 279.840474] RSP: 002b:00007ffee1179038 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 279.840483] RAX: ffffffffffffffda RBX: 00007ffee1179180 RCX: 00007fdfb46275d7 [ 279.840488] RDX: 00007ffee11790c0 RSI: 00000000c02c5625 RDI: 0000000000000003 [ 279.840493] RBP: 0000000000000002 R08: 0000000000000020 R09: 00000000009f0902 [ 279.840497] R10: 0000000000000000 R11: 0000000000000202 R12: 00007ffee117a5a0 [ 279.840501] R13: 00007ffee11790c0 R14: 0000000000000002 R15: 0000000000000000 [ 279.840515] The buggy address belongs to the variable: [ 279.840535] tvp5150_test_patterns+0x10/0xffffffffffffe360 [tvp5150] Fixes: c43875f6 ("[media] tvp5150: replace MEDIA_ENT_F_CONN_TEST by a control") Cc: stable@vger.kernel.org Signed-off-by:
-
- 12 Sep, 2018 32 commits
-
-
Gustavo A. R. Silva authored
Replace "falltrough" with a proper "fall through" annotation. This fix is part of the ongoing efforts to enabling -Wimplicit-fallthrough Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Rob Herring authored
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: "Lad, Prabhakar" <prabhakar.csengg@gmail.com> Cc: Benoit Parrot <bparrot@ti.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Hyun Kwon <hyun.kwon@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Arnd Bergmann authored
The VIDEO_STILLPICTURE is only implemented by one driver, while VIDEO_GET_EVENT has two users in tree. In both cases, it is fairly easy to handle the compat ioctls in the native handler rather than relying on translation in fs/compat_ioctls. In effect, this means that now the drivers implement both structure layouts in both native and compat mode, but I don't see anything wrong with that. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
Most DVB audio and video ioctl commands are completely compatible, and are implemented by just two drivers: ttpci and ivtv. In both cases, we can use the same ioctl handler for both native and compat ioctl handling, and remove the entries from the global lookup table. In case of ttpci, this directly hooks into the file_operations structure, and for ivtv, we have to set the compat_ioctl32 method in v4l2_file_operations. For all I can tell, setting it to video_ioctl2 will still do the right thing for all commands. Note that for the VIDEO_STILLPICTURE and VIDEO_GET_EVENT commands, a translation handler in fs/compat_ioctl.c is still used. This works because the command numbers are different on 32-bit systems. Signed-off-by:
-
Arnd Bergmann authored
All the CEC ioctls are compatible, and they are only implemented in one driver, so we can simply let this driver handle them natively. Signed-off-by:
-
Arnd Bergmann authored
All dmx ioctls are compatible, and they are only implemented in one file, so we can replace the list of commands in fs/compat_ioctl.c with a single line in dmxdev. Signed-off-by:
-
Arnd Bergmann authored
The VIDEO_GET_EVENT and VIDEO_STILLPICTURE was added back in 2005 but it never worked because the command number is wrong. Using the right command number means we have a better chance of them actually doing the right thing, though clearly nobody has ever tried it successfully. I noticed these while auditing the remaining users of compat_time_t for y2038 bugs. This one is fine in that regard, it just never did anything. Fixes: 6e87abd0 ("[DVB]: Add compat ioctl handling.") Signed-off-by:
-
Kuninori Morimoto authored
This patch updates license to use SPDX-License-Identifier instead of verbose license text. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by:
Ramesh Shanmugasundaram <Ramesh.shanmugasundaram@bp.renesas.com> Signed-off-by:
-
zhong jiang authored
dma_zalloc_coherent has implemented the dma_alloc_coherent() + memset(), We prefer to dma_zalloc_coherent instead of open-codeing. Signed-off-by:
zhong jiang <zhongjiang@huawei.com> Signed-off-by:
-
Lao Wei authored
Motion eye video4linux driver for Sony Vaio PictureBook desn't validate user-controlled parameter 'vma->vm_pgoff', a malicious process might access all of kernel memory from user space by trying pass different arbitrary address. Discussion: http://www.openwall.com/lists/oss-security/2018/07/06/1Signed-off-by:
Lao Wei <zrlw@qq.com> Signed-off-by:
-
Kieran Bingham authored
The ADV748x supports configurable slave addresses for its I2C pages. Document the page names, and provide an example for setting each of the pages explicitly. Signed-off-by:
Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
-
Kieran Bingham authored
The reg-names property in the documentation is missing an '='. Add it. Fixes: 9feb7868 ("media: dt-bindings: media: adv7604: Extend bindings to allow specifying slave map addresses") Signed-off-by:
-
Kieran Bingham authored
This entry was created with my personal e-mail address. Update with the correct work related account. Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Kuninori Morimoto authored
This patch updates license to use SPDX-License-Identifier instead of verbose license text. As original license mentioned, it is GPL-2.0 in SPDX. Then, MODULE_LICENSE() should be "GPL v2" instead of "GPL". See ${LINUX}/include/linux/module.h "GPL" [GNU Public License v2 or later] "GPL v2" [GNU Public License v2] Signed-off-by:Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Kuninori Morimoto authored
This patch updates license to use SPDX-License-Identifier instead of verbose license text. As original license mentioned, it is GPL-2.0 in SPDX. Then, MODULE_LICENSE() should be "GPL v2" instead of "GPL". See ${LINUX}/include/linux/module.h "GPL" [GNU Public License v2 or later] "GPL v2" [GNU Public License v2] Signed-off-by: -
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
As original license mentioned, it is GPL-2.0+ in SPDX. Then, MODULE_LICENSE() should be "GPL" instead of "GPL v2". See ${LINUX}/include/linux/module.h "GPL" [GNU Public License v2 or later] "GPL v2" [GNU Public License v2] Signed-off-by: -
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Katsuhiro Suzuki authored
Add support for STMicroelectronics LNBH29 LNB supply driver. Signed-off-by:
Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Signed-off-by:
-
Philippe De Muyter authored
While v4l2_i2c_subdev_init does give a unique name to the subdev, matching the one appearing in dmesg for messages generated by dev_info and friends (e.g. imx185 30-0010), v4l2_spi_subdev_init does a poor job, copying only the driver name, but not the dev_name(), yielding e.g. "imx185", but missing the "spi1.1" part, and not generating a unique name. Fix that. Signed-off-by:
Philippe De Muyter <phdm@macqel.be> Acked-by:
-
Colin Ian King authored
The check for irq_mode == 2 occurs is always false and hence flags is always zero. This is because the check occurs in a path where irq_mode is >= 3. Clean up the code by removing the check and irq_mode and just pass 0. Detected by CoverityScan, CID#1472214 ("Logically dead code") Signed-off-by:Colin Ian King <colin.king@canonical.com> Cc: Ralph Metzler <rjkm@metzlerbros.de> Signed-off-by:
-
Daniel Scheller authored
I'm definitely not interested to try to maintain those drivers anymore. Signed-off-by:
Daniel Scheller <d.scheller@gmx.net> Signed-off-by:
-
Daniel Graefe authored
Added missing SPDX license identifiers to all files of the omap4iss driver. Most files already have license texts which clearly state them to be licensed under GPL 2.0 or later. SPDX identifiers were added accordingly. Some files do not have any license text. SPDX identifiers for GPL 2.0 were added to them, in accordance with the default license of the kernel. Signed-off-by:
Daniel Graefe <daniel.graefe@fau.de> Signed-off-by:
Roman Sommer <roman.sommer@fau.de> Signed-off-by:
-
Mauro Carvalho Chehab authored
As pointed by Daniel Scheller <d.scheller@gmx.net>, sparse warns that a segment may fall through. We're deprecating this warning in favor of gcc 8 equivalent warning. In this specific case, the code for DVB-S applies for DVB-S2. In a matter of fact, several things there (like rolloff factor logic) assume that the transponder is DVB-S2. So, add the corresponding fall-trough markup, for gcc to properly ignore it. Reported-by:
-
Sebastian Andrzej Siewior authored
Time "in interrupt" accounting with the help of `jiffies' is a pointless exercise. This variable isn't even used. Remove time_in_irq. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Sebastian Andrzej Siewior authored
The context in which sd_dq_callback() is non atomic, there is even msleep() at the end of the function. There is no need to use GFP_ATOMIC here - use GFP_KERNEL instead. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Sebastian Andrzej Siewior authored
As far as I can tell em28xx_audio_urb_init() is called once during initialization from non atomic context. Memory allocation from non atomic context should use GFP_KERNEL to avoid using emergency pool for memory allocation. Use GFP_KERNEL for memory allocation. Signed-off-by:
-
Daniel Scheller authored
As both the MODULE_LICENSE and the boilerplates are now in sync and clear that the driver is licensed under the terms of the GPLv2-only, add a matching SPDX license identifier tag. Cc: Ralph Metzler <rjkm@metzlerbros.de> Cc: Manfred Voelkel <mvoelkel@DigitalDevices.de> Signed-off-by:
-
Daniel Scheller authored
In commit 3db30defab4b ("use correct MODULE_LINCESE for GPL v2 only according to notice in header") in the upstream repository for the mentioned driver at https://github.com/DigitalDevices/dddvb.git, the MODULE_LICENSE was fixed to "GPL v2" and is now in sync with the GPL copyright boilerplate. Apply this change to the kernel tree driver as well. Cc: Ralph Metzler <rjkm@metzlerbros.de> Cc: Manfred Voelkel <mvoelkel@DigitalDevices.de> Signed-off-by:
-
