There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210317093936.5572-1-colin.king@canonical.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series "spi: Adding support for software nodes" from Heikki Krogerus <heikki.krogerus@linux.intel.com>:

Hi,

The older API used to supply additional device properties for the
devices - so mainly the function device_add_properties() - is going to
be removed. The reason why the API will be removed is because it gives
false impression that the properties are assigned directly to the
devices, which has actually never been the case - the properties have
always been assigned to a software fwnode which was then just directly
linked with the device when the old API was used. By only accepting
device properties instead of complete software nodes, the subsystems
remove any change of taking advantage of the other features the
software nodes have.

The change that is required from the spi subsystem and the drivers is
trivial. Basically only the "properties" member in struct
spi_board_info, which was a pointer to struct property_entry, is
replaced with a pointer to a complete software node.

thanks,

Heikki Krogerus (4):
  spi: Add support for software nodes
  ARM: pxa: icontrol: Constify the software node
  ARM: pxa: zeus: Constify the software node
  spi: Remove support for dangling device properties

 arch/arm/mach-pxa/icontrol.c | 12 ++++++++----
 arch/arm/mach-pxa/zeus.c     |  6 +++++-
 drivers/spi/spi.c            | 21 ++++++---------------
 include/linux/spi/spi.h      |  7 +++----
 4 files changed, 22 insertions(+), 24 deletions(-)

--
2.30.1

base-commit: a38fd874

>From now on only accepting complete software nodes.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20210303152814.35070-5-heikki.krogerus@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

When device properties are supplied to the devices, in
reality a software fwnode that holds those properties is
created which is then assigned to the device. If the device
properties are constant the software node can also be
constant.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Link: https://lore.kernel.org/r/20210303152814.35070-4-heikki.krogerus@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

When device properties are supplied to the devices, in
reality a software fwnode that holds those properties is
created which is then assigned to the device. If the device
properties are constant the software node can also be
constant.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Link: https://lore.kernel.org/r/20210303152814.35070-3-heikki.krogerus@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Making it possible for the drivers to assign complete
software fwnodes to the devices instead of only the device
properties in those nodes.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20210303152814.35070-2-heikki.krogerus@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series "spi: finalize 'delay_usecs' removal/transition" from Alexandru Ardelean <aardelean@deviqon.com>:

A while back I started the introduction of the 'spi_delay' data type:
  https://lore.kernel.org/linux-spi/20190926105147.7839-1-alexandru.ardelean@analog.com/

Users of the 'delay_usecs' were removed from drivers.

Now it's time to remove the 'delay_usecs' from the SPI subsystem and use
only the 'delay' field.

This changeset adapts all SPI drivers to do without 'delay_usecs'.
Additionally, for greybus we need to adapt it to use the 'delay' in
nano-seconds and convert it to micro-seconds.

Alexandru Ardelean (10):
  spi: spi-axi-spi-engine: remove usage of delay_usecs
  spi: bcm63xx-spi: don't check 'delay_usecs' field
  spi: spi-bcm-qspi: replace 'delay_usecs' with 'delay.value' check
  spi: spi-sh: replace 'delay_usecs' with 'delay.value' in pr_debug
  spi: spi-tegra20-flash: don't check 'delay_usecs' field for spi
    transfer
  staging: greybus: spilib: use 'spi_delay_to_ns' for getting xfer delay
  spi: spi-falcon: remove check for 'delay_usecs'
  spi: fsl-espi: remove usage of 'delay_usecs' field
  spi: core: remove 'delay_usecs' field from spi_transfer
  spi: docs: update info about 'delay_usecs'

 Documentation/spi/spi-summary.rst |  7 +++++--
 drivers/spi/spi-axi-spi-engine.c  | 12 ++++--------
 drivers/spi/spi-bcm-qspi.c        |  2 +-
 drivers/spi/spi-bcm63xx.c         |  2 +-
 drivers/spi/spi-falcon.c          |  2 +-
 drivers/spi/spi-fsl-espi.c        | 17 +++++------------
 drivers/spi/spi-sh.c              |  4 ++--
 drivers/spi/spi-tegra20-sflash.c  |  3 +--
 drivers/spi/spi.c                 |  1 -
 drivers/staging/greybus/spilib.c  |  5 ++++-
 include/linux/spi/spi.h           | 12 ------------
 11 files changed, 24 insertions(+), 43 deletions(-)

--
2.29.2

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Avoid CONFIG_PM preprocessor check for pm suspend/resume
callbacks and identify the functions with __maybe_unused.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/1615545329-5496-1-git-send-email-alain.volmat@foss.st.comSigned-off-by: Mark Brown <broonie@kernel.org>

The 'delay_usecs' field is no longer present on the spi_transfer struct.
This change updates the doc to mention the usage of the (relatively) new
'delay' field.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210308145502.1075689-11-aardelean@deviqon.comSigned-off-by: Mark Brown <broonie@kernel.org>

The 'delay' field in the spi_transfer struct is meant to replace the
'delay_usecs' field. However some cleanup was required to remove the
uses of 'delay_usecs'. Now that it's been cleaned up, we can remove it
from the kernel tree.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210308145502.1075689-10-aardelean@deviqon.comSigned-off-by: Mark Brown <broonie@kernel.org>

The 'delay_usecs' field is being removed from the spi_transfer struct.
This change removes it from the SPI FSL ESPI driver.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210308145502.1075689-9-aardelean@deviqon.comSigned-off-by: Mark Brown <broonie@kernel.org>

The 'delay_usecs' field is being removed from the spi_transfer struct.
This change removes it from the SPI Falcon driver.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210308145502.1075689-8-aardelean@deviqon.comSigned-off-by: Mark Brown <broonie@kernel.org>

The intent is the removal of the 'delay_usecs' field from the
spi_transfer struct, as there is a 'delay' field that does the same
thing.

The spi_delay_to_ns() can be used to get the transfer delay. It works by
using the 'delay_usecs' field first (if it is non-zero), and finally
uses the 'delay' field.

Since the 'delay_usecs' field is going away, this change makes use of the
spi_delay_to_ns() function. This also means dividing the return value of
the function by 1000, to convert it to microseconds.
To prevent any potential faults when converting to microseconds and since
the result of spi_delay_to_ns() is int, the delay is being computed in 32
bits and then clamped between 0 & U16_MAX.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210308145502.1075689-7-aardelean@deviqon.comSigned-off-by: Mark Brown <broonie@kernel.org>

The 'delay_usecs' field was handled for backwards compatibility in case
there were some users that still configured SPI delay transfers with
this field.

They should all be removed by now. So we can remove the 'delay_usecs'
handling in this driver.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210308145502.1075689-6-aardelean@deviqon.comSigned-off-by: Mark Brown <broonie@kernel.org>

The 'delay_usecs' field is going away. The replacement for it is the
'delay' field. So, we should print the 'delay.value' value instead.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210308145502.1075689-5-aardelean@deviqon.comSigned-off-by: Mark Brown <broonie@kernel.org>

The 'delay_usecs' field is going away. The replacement for it is the
'delay' field. So, we should check for 'delay.value' being non-zero.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210308145502.1075689-4-aardelean@deviqon.comSigned-off-by: Mark Brown <broonie@kernel.org>

The 'delay_usecs' field was handled for backwards compatibility in case
there were some users that still configured SPI delay transfers with
this field.

They should all be removed by now.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210308145502.1075689-3-aardelean@deviqon.comSigned-off-by: Mark Brown <broonie@kernel.org>

The 'delay_usecs' field was handled for backwards compatibility in case
there were some users that still configured SPI delay transfers with
this field.

They should all be removed by now.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210308145502.1075689-2-aardelean@deviqon.comSigned-off-by: Mark Brown <broonie@kernel.org>

drivers/spi/spi-cadence-quadspi.c:267:18: warning: Shifting signed 32-bit
value by 31 bits is undefined behaviour [shiftTooManyBitsSigned]
    return reg & (1 << CQSPI_REG_CONFIG_IDLE_LSB);
                    ^
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jay Fang <f.fangjian@huawei.com>
Link: https://lore.kernel.org/r/1614854872-8694-1-git-send-email-f.fangjian@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series "parport: Introduce module_parport_driver() and use it" from Andy Shevchenko <andriy.shevchenko@linux.intel.com>:

Introduce module_parport_driver() and use it.
Greg or Mark, since we have this series tagged, can somebody of you pick it up?

Changelog v3:
- added tag on patch 1 (Sudip)
- Cc'ed to Greg

Andy Shevchenko (3):
  parport: Introduce module_parport_driver() helper macro
  spi: butterfly: Switch to use module_parport_driver()
  spi: lm70llp: Switch to use module_parport_driver()

 drivers/spi/spi-butterfly.c | 13 +------------
 drivers/spi/spi-lm70llp.c   | 13 +------------
 include/linux/parport.h     | 12 +++++++++++-
 3 files changed, 13 insertions(+), 25 deletions(-)

base-commit: fe07bfda

--
2.30.1

this patch update spi document for MT6779 SOC.
Signed-off-by: Mason Zhang <Mason.Zhang@mediatek.com>
Link: https://lore.kernel.org/r/20210226110109.30500-1-Mason.Zhang@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add support for nxp,imx8dxl-fspi, do the bindings document.
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Link: https://lore.kernel.org/r/20210302124936.1972546-3-kuldeep.singh@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Errata ERR050568 description says that "Flash access by FlexSPI AHB
command may not work with platform frequency equal to 300 MHz" on
LS1028A.

By default, smaller length reads(equal to RX FIFO size) are done by IP
bus and larger length reads using AHB bus. For adding errata workaround,
use IP bus to read entire flash contents and disable AHB path when
platform frequency is 300Mhz.
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Link: https://lore.kernel.org/r/20210302124936.1972546-5-kuldeep.singh@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add driver support for imx8dxl which support read through IP bus only
and disable AHB bus due to an IC errata. Use the pre-defined quirk
FSPI_QUIRK_USE_IP_ONLY directly in device-type data to disable AHB read.
Signed-off-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Link: https://lore.kernel.org/r/20210302124936.1972546-4-kuldeep.singh@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add support for disabling AHB bus and read entire flash contents via IP
bus only. Please note, this enables IP bus read using a quirk which can
be enabled directly in device-type data or in existence of an errata
where AHB bus may need to be disabled.
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Link: https://lore.kernel.org/r/20210302124936.1972546-2-kuldeep.singh@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Fix OF node leaks by calling of_node_put in
for_each_available_child_of_node when the cycle returns.

Generated by: scripts/coccinelle/iterators/for_each_child.cocci
Signed-off-by: Junlin Yang <yangjunlin@yulong.com>
Link: https://lore.kernel.org/r/20210215110425.1012-1-angkery@163.comSigned-off-by: Mark Brown <broonie@kernel.org>

The DMA cap mask is no longer used since:
commit 7758e390 ("spi: atmel: remove compat for non DT board when requesting dma chan")
Drop it now.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20210218132840.131898-1-tudor.ambarus@microchip.comSigned-off-by: Mark Brown <broonie@kernel.org>

Building this file with clang leads to a an unreachable code path
causing a warning from objtool:

drivers/spi/spi-rockchip.o: warning: objtool: rockchip_spi_transfer_one()+0x2e0: sibling call from callable instruction with modified stack frame

Change the unreachable() into an error return that can be
handled if it ever happens, rather than silently crashing
the kernel.

Fixes: 65498c6a ("spi: rockchip: support 4bit words")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20210226140109.3477093-1-arnd@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Set the (optional) idle pinctrl state during runtime suspend. This is the
same schema used in PL022 driver and can help with HW designs sharing
the SPI lines for different purposes.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20210222023243.491432-1-alexander.sverdlin@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Switch to use module_parport_driver() to reduce boilerplate code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210303091642.23929-4-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Switch to use module_parport_driver() to reduce boilerplate code.
Note, device_initcall() is a default for module_init().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210303091642.23929-3-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Introduce module_parport_driver() helper macro to reduce boilerplate
in the existing and new code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210303091642.23929-2-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

This removes the assignment of setup and cleanup functions for the ath79
target. Assigning the setup-method will lead to 'setup_transfer' not
being assigned in spi_bitbang_init. Because of this, performing any
TX/RX operation will lead to a kernel oops.

Also drop the redundant cleanup assignment, as it's also assigned in
spi_bitbang_init.
Signed-off-by: David Bauer <mail@david-bauer.net>
Link: https://lore.kernel.org/r/20210303160837.165771-2-mail@david-bauer.netSigned-off-by: Mark Brown <broonie@kernel.org>

spi-bitbang has to call the chipselect function on the ath79 SPI driver
in order to communicate with the SPI slave device, as the ath79 SPI
driver has three dedicated chipselect lines but can also be used with
GPIOs for the CS lines.

Fixes commit 4a07b8bc ("spi: bitbang: Make chipselect callback optional")
Signed-off-by: David Bauer <mail@david-bauer.net>
Link: https://lore.kernel.org/r/20210303160837.165771-1-mail@david-bauer.netSigned-off-by: Mark Brown <broonie@kernel.org>

The driver sets auto_runtime_pm to true, but it doesn't call
pm_runtime_enable(), which results in "Failed to power device" when PM support
is enabled.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://lore.kernel.org/r/20210223151851.4110-3-noltari@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

The driver sets auto_runtime_pm to true, but it doesn't call
pm_runtime_enable(), which results in "Failed to power device" when PM support
is enabled.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://lore.kernel.org/r/20210223151851.4110-2-noltari@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Release the RX channel and free the dma coherent memory when
devm_spi_register_master() fails.

Fixes: 5720ec0a ("spi: spi-ti-qspi: Add DMA support for QSPI mmap read")
Cc: stable@vger.kernel.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20210218130950.90155-1-tudor.ambarus@microchip.comSigned-off-by: Mark Brown <broonie@kernel.org>

Pull rdma fixes from Jason Gunthorpe:
 "Nothing special here, though Bob's regression fixes for rxe would have
  made it before the rc cycle had there not been such strong winter
  weather!

   - Fix corner cases in the rxe reference counting cleanup that are
     causing regressions in blktests for SRP

   - Two kdoc fixes so W=1 is clean

   - Missing error return in error unwind for mlx5

   - Wrong lock type nesting in IB CM"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/rxe: Fix errant WARN_ONCE in rxe_completer()
  RDMA/rxe: Fix extra deref in rxe_rcv_mcast_pkt()
  RDMA/rxe: Fix missed IB reference counting in loopback
  RDMA/uverbs: Fix kernel-doc warning of _uverbs_alloc
  RDMA/mlx5: Set correct kernel-doc identifier
  IB/mlx5: Add missing error code
  RDMA/rxe: Fix missing kconfig dependency on CRYPTO
  RDMA/cm: Fix IRQ restore in ib_send_cm_sidr_rep