- 31 Aug, 2022 24 commits
-
-
Oleksij Rempel authored
Now ksz_pread/ksz_pwrite can return error value. So, make use of it. Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Oleksij Rempel authored
ksz_read*/ksz_write* are able to return errors, so forward it. Signed-off-by:
-
Oleksij Rempel authored
PHY access may end with errors on different levels. So, allow to forward return values where possible. Signed-off-by:
-
Oleksij Rempel authored
This issue was detected after adding support of regmap_ranges for KSZ8563R chip. This chip is reporting extended registers support without having actual extended registers. This made PHYlib request not existing registers. Signed-off-by:
-
Oleksij Rempel authored
KSZ8563 has two 100Mbit PHYs and CPU port with RGMII support. Since 1000Mbit configuration for the RGMII capable MAC is present, we should use per port validation. As main part of migration to per-port validation we need to rework ksz9477_switch_init() function. Which is using undocumented REG_GLOBAL_OPTIONS register to detect per-chip Gbit support. So, it is related to some sort of risk for regressions. To reduce this risk I compared the code with publicly available documentations. This function will executed on following currently supported chips: struct ksz_chip_data OF compatible KSZ9477 KSZ9477 KSZ9897 KSZ9897 KSZ9893 KSZ9893, KSZ9563 KSZ8563 KSZ8563 KSZ9567 KSZ9567 Only KSZ9893, KSZ9563, KSZ8563 document existence of 0xf == REG_GLOBAL_OPTIONS register with bit field description "SKU ID": KSZ9893 0x0C KSZ9563 0x1C KSZ8563 0x3C The existence of hidden flags is not documented. KSZ9477, KSZ9897, KSZ9567 do not document this register at all. Only KSZ8563 is documented as non Gbit chip: 100Mbit PHYs and RGMII CPU port. So, this change should not introduce a regression for configurations with properly used OF compatibles. Signed-off-by:
-
Oleksij Rempel authored
Add separate entry for the KSZ8563 chip. According to the documentation it can support Gbit only on RGMII port. So, we will need to be able to describe in the followup patch. Signed-off-by:
-
Xin Gao authored
'unsigned int' is better than 'unsigned'. Signed-off-by:
Xin Gao <gaoxin@cdjrlc.com> Signed-off-by:
-
Vlad Buslov authored
This reverts commit 6005a8ae. The assertion was intentionally removed in commit 043b8413 ("net: devlink: remove redundant rtnl lock assert") and, contrary what is described in the commit message, the comment reflects that: "Caller must hold RTNL mutex or reference to dev...". Signed-off-by:
Vlad Buslov <vladbu@nvidia.com> Tested-by:
Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20220829121324.3980376-1-vladbu@nvidia.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Petr Machata says: ==================== mlxsw: Configure max LAG ID for Spectrum-4 Amit Cohen writes: In the device, LAG identifiers are stored in the port group table (PGT). During initialization, firmware reserves a certain amount of entries at the beginning of this table for LAG identifiers. In Spectrum-4, the size of the PGT table did not increase, but the maximum number of LAG identifiers was doubled, leaving less room for others entries (e.g., flood entries) that also reside in the PGT. Therefore, in order to avoid a regression and as long as there is no explicit requirement to support 256 LAGs, configure the firmware to allocate the same amount of LAG entries (128) as in Spectrum-{2,3}. This can be done via the 'max_lag' field in CONFIG_PROFILE command. Patch set overview: Patch #1 edits the comment of the existing 'max_lag' field. Patch #2 adds support for configuring 'max_lag' field via CONFIG_PROFILE command. Patch #3 adds an helper function to get the actual 'max_lag' in the device. Patch #4 adjusts Spectrum-4 to configure 'max_lag' field. ==================== Link: https://lore.kernel.org/r/cover.1661527928.git.petrm@nvidia.comSigned-off-by: -
Amit Cohen authored
Starting from Spectrum-4, the maximum number of LAG IDs can be configured by software via CONFIG_PROFILE command during driver initialization. Add a dedicated instance of 'struct mlxsw_config_profile' for Spectrum-4 and set the 'max_lag' field to 128, which is the same amount of LAG entries as in Spectrum-{2,3}. Without this configuration, firmware reserves 256 (the value of 'cap_max_lag' resource) entries at beginning of PGT table for LAG identifiers, which means that less entries in PGT will be available. Signed-off-by:Amit Cohen <amcohen@nvidia.com> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
-
Amit Cohen authored
Currently the driver queries the maximum supported LAG ID from firmware. This will not be accurate anymore once the driver will configure 'max_lag' via CONFIG_PROFILE command. For resource query, firmware returns the maximum LAG ID which is supported by hardware. Software can configure firmware to do not allocate entries for all the supported LAGs, and to limit LAG IDs. In this case, the resource query will not return the actual maximum LAG ID. Add a helper function for getting this value. In case that 'max_lag' field was set during initialization, return the value which was used, otherwise, query firmware for the maximum supported ID. Signed-off-by:
-
Amit Cohen authored
In the device, LAG identifiers are stored in the port group table (PGT). During initialization, firmware reserves a certain amount of entries at the beginning of this table for LAG identifiers. In Spectrum-4, the size of the PGT table did not increase, but the maximum number of LAG identifiers was doubled, leaving less room for others entries (e.g., flood entries) that also reside in the PGT. Therefore, in order to avoid a regression and as long as there is no explicit requirement to support 256 LAGs, mlxsw driver will configure the firmware to allocate the same amount of LAG entries (128) as in Spectrum-{2,3}. This configuration is done using 'max_lag' field in CONFIG_PROFILE command. Extend 'struct mlxsw_config_profile' to support 'max_lag' field and configure firmware accordingly. A next patch will adjust Spectrum-4 to configure 'max_lag' field. Signed-off-by: -
Amit Cohen authored
Starting from Spectrum-4, the maximum number of LAG IDs can be configured by software via CONFIG_PROFILE command during driver initialization. Edit the comment of 'max_lag' field to mention that this field is reserved in Spectrum-1/2/3 and describe firmware behavior. Signed-off-by:
-
Fernando Fernandez Mancera authored
tlb_dynamic_lb bonding option is compatible with balance-tlb and balance-alb modes. In order to be consistent with other option documentation, it should mention both modes not only balance-tlb. Signed-off-by:
Fernando Fernandez Mancera <ffmancera@riseup.net> Acked-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20220826154738.4039-1-ffmancera@riseup.netSigned-off-by:
-
Dan Carpenter authored
These error paths return success but they should return -ENOMEM. Fixes: 01328e23 ("mlxsw: minimal: Extend module to port mapping with slot index") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Nathan Chancellor authored
Clang warns: drivers/net/ethernet/mellanox/mlx5/core/en_rep.c:481:6: error: variable 'err' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] if (IS_ERR(flow_rule)) { ^~~~~~~~~~~~~~~~~ drivers/net/ethernet/mellanox/mlx5/core/en_rep.c:489:9: note: uninitialized use occurs here return err; ^~~ drivers/net/ethernet/mellanox/mlx5/core/en_rep.c:481:2: note: remove the 'if' if its condition is always true if (IS_ERR(flow_rule)) { ^~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/mellanox/mlx5/core/en_rep.c:474:9: note: initialize the variable 'err' to silence this warning int err; ^ = 0 1 error generated. There is little reason to have the 'goto + error variable' construct in this function. Get rid of it and just return the PTR_ERR value in the if statement and 0 at the end. Fixes: 430e2d5e ("net/mlx5: E-Switch, Move send to vport meta rule creation") Link: https://github.com/ClangBuiltLinux/linux/issues/1695Signed-off-by:Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
-
Jiri Pirko authored
Once devlink port is successfully registered, the devlink pointer is not NULL. Therefore, the check is going to be always true and therefore pointless. Remove it. Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Acked-by:
Dimitris Michailidis <dmichail@fungible.com> Link: https://lore.kernel.org/r/20220826110411.1409446-1-jiri@resnulli.usSigned-off-by:
-
Jakub Kicinski authored
Arınç ÜNAL says: ==================== completely rework mediatek,mt7530 binding This patch series brings complete rework of the mediatek,mt7530 binding. The binding is checked with "make dt_binding_check DT_SCHEMA_FILES=mediatek,mt7530.yaml". If anyone knows the GIC bit for interrupt for multi-chip module MT7530 in MT7623AI SoC, let me know. I'll add it to the examples. If anyone got a Unielec U7623 or another MT7623AI board, please reach out. ==================== Link: https://lore.kernel.org/r/20220825082301.409450-1-arinc.unal@arinc9.comSigned-off-by:
-
Arınç ÜNAL authored
Update the description of the binding. - Describe the switches, which SoCs they are in, or if they are standalone. - Explain the various ways of configuring MT7530's port 5. - Remove phy-mode = "rgmii-txid" from description. Same code path is followed for delayed rgmii and rgmii phy-mode on mtk_eth_soc.c. Signed-off-by:
Arınç ÜNAL <arinc.unal@arinc9.com> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Arınç ÜNAL authored
Define acceptable phy-mode values for the CPU ports of mt7530 and mt7531 switches. Remove relevant information from the description of the binding. Signed-off-by:
-
Arınç ÜNAL authored
Update the examples on the binding. - Add examples which include a wide variation of configurations. - Make example comments YAML comment instead of DT binding comment. - Add interrupt controller to the examples. Include header file for interrupt. - Change reset line for MT7621 examples. - Pretty formatting for the examples. - Change switch reg to 0. - Change port labels to fit the example, change port 4 label to wan. Signed-off-by:
-
Arınç ÜNAL authored
- Add description for reset-gpios. - Invalidate reset-gpios if mediatek,mcm is used. We cannot use multiple reset lines at the same time. - Invalidate mediatek,mcm if the compatible device is mediatek,mt7531. There is no multi-chip module version of mediatek,mt7531. - Require mediatek,mcm for mediatek,mt7621 as the compatible string is only used for the multi-chip module version of MT7530. Signed-off-by:
-
Arınç ÜNAL authored
Fix the description of mediatek,mcm. mediatek,mcm is not used on MT7623NI. Signed-off-by:
-
Arınç ÜNAL authored
Make trivial changes on the binding. - Update title to include MT7531 switch. - Add me as a maintainer. List maintainers in alphabetical order by first name. - Add description to compatible strings. - Stretch descriptions up to the 80 character limit. - Remove lists for single items. - Remove requiring reg as it's already required by dsa-port.yaml. - Define acceptable reg values for the CPU ports. - Remove quotes from $ref: "dsa.yaml#". Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
-
- 30 Aug, 2022 15 commits
-
-
Jiri Pirko authored
Follow-up the removal of unused internal api of port params made by commit 42ded61a ("devlink: Delete not used port parameters APIs") and stub the commands and add extack message to tell the user what is going on. If later on port params are needed, could be easily re-introduced, but until then it is a dead code. Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Zhengchao Shao authored
Using TCQ_MIN_PRIO_BANDS instead of magic number in prio_tune(). Signed-off-by:
Zhengchao Shao <shaozhengchao@huawei.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Link: https://lore.kernel.org/r/20220826041035.80129-1-shaozhengchao@huawei.comSigned-off-by:
-
Mengyuan Lou authored
Add build options and guidance doc. Initialize pci device access for Wangxun Gigabit Ethernet devices. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Mengyuan Lou <mengyuanlou@net-swift.com> Link: https://lore.kernel.org/r/20220826034609.51854-1-mengyuanlou@net-swift.comSigned-off-by:
-
Paolo Abeni authored
Jakub Kicinski says: ==================== netlink: support reporting missing attributes This series adds support for reporting missing attributes in a structured way. We communicate the type of the missing attribute and if it was missing inside a nest the offset of that nest. Example of (YAML-based) user space reporting ethtool header missing: Kernel error: missing attribute: .header I was tempted to integrate the check with the policy but it seems tricky without doing a full scan, and there may be a ton of attrs in the policy. So leaving that for later. ==================== Link: https://lore.kernel.org/r/20220826030935.2165661-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
The actual presence check for the header is in ethnl_parse_header_dev_get() but it's a few layers in, and already has a ton of arguments so let's just pick the low hanging fruit and check for missing header in the default request handler. Reviewed-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Jakub Kicinski authored
Strset needs ETHTOOL_A_STRINGSET_ID, use it as an example of reporting attrs missing in nests. Reviewed-by:
-
Jakub Kicinski authored
Devlink with its global attr policy has a lot of attribute presence check, use the new ext ack reporting when they are missing. Reviewed-by:
-
Jakub Kicinski authored
Being able to check attribute presence and set extack if not on one line is handy, add helpers. Reviewed-by:
-
Jakub Kicinski authored
There is currently no way to report via extack in a structured way that an attribute is missing. This leads to families resorting to string messages. Add a pair of attributes - @offset and @type for machine-readable way of reporting missing attributes. The @offset points to the nest which should have contained the attribute, @type is the expected nla_type. The offset will be skipped if the attribute is missing at the message level rather than inside a nest. User space should be able to figure out which attribute enum (AKA attribute space AKA attribute set) the nest pointed to by @offset is using. Reviewed-by:
-
Jakub Kicinski authored
The ext_ack writing code looks very "organically grown". Move the calculation of the size and writing out to helpers. This is more idiomatic and gives us the ability to return early avoiding the long (and randomly ordered) "if" conditions. Reviewed-by:
-
Pavel Begunkov authored
Consolidate alloclen and pagedlen calculation for zerocopy and normal paged requests. The current non-zerocopy paged version can a bit overallocate and unnecessary copy a small chunk of data into the linear part. Cc: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/netdev/CA+FuTSf0+cJ9_N_xrHmCGX_KoVCWcE0YQBdtgEkzGvcLMSv7Qw@mail.gmail.com/Signed-off-by:
Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/b0e4edb7b91f171c7119891d3c61040b8c56596e.1661428921.git.asml.silence@gmail.comSigned-off-by:
-
Paolo Abeni authored
Simon Horman says: ==================== nfp: port speed and eeprom get/set updates this short series is the initial updates for the NFP driver for the v6.1 Kernel. It covers two enhancements: 1. Patches 1/3 and 2/3: - Support cases where application firmware does not know port speeds a priori by relaying this information from the management firmware to the application firmware. This allows the existing mechanism, whereby the driver reports port speeds to user-space as provided by the application firmware, to work in this case. 2. Patch 2/3: - Add support for eeprom get and set command ==================== Link: https://lore.kernel.org/r/20220825141223.22346-1-simon.horman@corigine.comSigned-off-by: -
Baowen Zheng authored
Add support for eeprom get and set operation with ethtool command. with this change, we can support commands as: #ethtool -e enp101s0np0 offset 0 length 6 Offset Values ------ ------ 0x0000: 00 15 4d 16 66 33 #ethtool -E enp101s0np0 magic 0x400019ee offset 5 length 1 value 0x88 We make this change to persist MAC change during driver reload and system reboot. Signed-off-by:
Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
Yinjun Zhang authored
A new tlv type is introduced to indicate if application firmware is indifferent to port speed, and inform management firmware of the result. And the result is always true for flower application firmware since it's indifferent to port speed from the start and will never change. Signed-off-by:
Yinjun Zhang <yinjun.zhang@corigine.com> Reviewed-by:
Louis Peens <louis.peens@corigine.com> Signed-off-by:
-
Yinjun Zhang authored
In future releases the NIC application firmware may be indifferent to port speeds - not built for specific port speeds - and consequently it will not be able to report VF port speeds to the driver without first learning them. With this change, the driver will pass the speed of physical ports from management firmware to application firmware, and the latter will copy the speed of port 0 to all the active VFs. So that the driver can get VF port speed as before. The port speed of a VF may be requested from userspace using: ethtool <vf-intf> Signed-off-by:
-
- 29 Aug, 2022 1 commit
-
-
David S. Miller authored
Casper Andersson says: ==================== net: sparx5: add mrouter support This series adds support for multicast router ports to SparX5. To manage mrouter ports the driver must keep track of mdb entries. When adding an mrouter port the driver has to iterate over all mdb entries and modify them accordingly. v2: - add bailout in free_mdb - re-arrange mdb struct to avoid holes - change devm_kzalloc -> kzalloc - change GFP_ATOMIC -> GFP_KERNEL - fix spelling ==================== Reviewed-by:
Steen Hegelund <Steen.Hegelund@microchip.com> Signed-off-by:
-
