- 24 Sep, 2022 5 commits
-
-
Laurent Pinchart authored
Restrict the DPCC configuration that can be set by userspace to valid register bits. To do so, reorganize the related register macros to define valid bitmasks, as well as bits of the DPCC mode register. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Laurent Pinchart authored
The rkisp1_dpcc_config() function looks over methods sets to configure them, but sets the RKISP1_CIF_ISP_DPCC_METHODS_SET_* registers outside of the loop with hand-unrolled code. Move this to the loop to simplify the code. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Sean Young authored
By rounding down, the actual timeout can be lower than requested. As a result, long spaces just below the requested timeout can be incorrectly reported as timeout and truncated. Fixes: 877f1a7c ("media: rc: mceusb: allow the timeout to be configurable") Cc: stable@vger.kernel.org Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
ye xingchen authored
Return the value send_packet() directly instead of storing it in another redundant variable. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Alan Stern authored
Automatic kernel fuzzing led to a WARN about invalid pipe direction in the mceusb driver: ------------[ cut here ]------------ usb 6-1: BOGUS control dir, pipe 80000380 doesn't match bRequestType 40 WARNING: CPU: 0 PID: 2465 at drivers/usb/core/urb.c:410 usb_submit_urb+0x1326/0x1820 drivers/usb/core/urb.c:410 Modules linked in: CPU: 0 PID: 2465 Comm: kworker/0:2 Not tainted 5.19.0-rc4-00208-g69cb6c65 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_submit_urb+0x1326/0x1820 drivers/usb/core/urb.c:410 Code: 7c 24 40 e8 ac 23 91 fd 48 8b 7c 24 40 e8 b2 70 1b ff 45 89 e8 44 89 f1 4c 89 e2 48 89 c6 48 c7 c7 a0 30 a9 86 e8 48 07 11 02 <0f> 0b e9 1c f0 ff ff e8 7e 23 91 fd 0f b6 1d 63 22 83 05 31 ff 41 RSP: 0018:ffffc900032becf0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8881100f3058 RCX: 0000000000000000 RDX: ffffc90004961000 RSI: ffff888114c6d580 RDI: fffff52000657d90 RBP: ffff888105ad90f0 R08: ffffffff812c3638 R09: 0000000000000000 R10: 0000000000000005 R11: ffffed1023504ef1 R12: ffff888105ad9000 R13: 0000000000000040 R14: 0000000080000380 R15: ffff88810ba96500 FS: 0000000000000000(0000) GS:ffff88811a800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffe810bda58 CR3: 000000010b720000 CR4: 0000000000350ef0 Call Trace: <TASK> usb_start_wait_urb+0x101/0x4c0 drivers/usb/core/message.c:58 usb_internal_control_msg drivers/usb/core/message.c:102 [inline] usb_control_msg+0x31c/0x4a0 drivers/usb/core/message.c:153 mceusb_gen1_init drivers/media/rc/mceusb.c:1431 [inline] mceusb_dev_probe+0x258e/0x33f0 drivers/media/rc/mceusb.c:1807 The reason for the warning is clear enough; the driver sends an unusual read request on endpoint 0 but does not set the USB_DIR_IN bit in the bRequestType field. More importantly, the whole situation can be avoided and the driver simplified by converting it over to the relatively new usb_control_msg_recv() and usb_control_msg_send() routines. That's what this fix does. Reported-and-tested-by: Rondreis <linhaoguo86@gmail.com> Link: https://lore.kernel.org/all/CAB7eexLLApHJwZfMQ=X-PtRhw0BgO+5KcSMS05FNUYejJXqtSA@mail.gmail.com/Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable@vger.kernel.org Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
- 08 Sep, 2022 1 commit
-
-
Lukas Bulwahn authored
The config EMBEDDED selects EXPERT, i.e., when EMBEDDED is enabled, EXPERT is usually also enabled. Hence, it sufficient to have the option MEDIA_SUPPORT_FILTER set to y if !EXPERT. This way, MEDIA_SUPPORT_FILTER does not refer to CONFIG_EMBEDDED anymore and allows us to remove CONFIG_EMBEDDED in the close future. Remove the reference to CONFIG_EMBEDDED in MEDIA_SUPPORT_FILTER. Link: https://lore.kernel.org/linux-media/20220908104337.11940-4-lukas.bulwahn@gmail.comSigned-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
- 31 Aug, 2022 1 commit
-
-
Ezequiel Garcia authored
The Hantro mainline driver has been used in production since several years and was only kept as a staging driver due the stateless CODEC controls. Now that all the stateless CODEC controls have been moved out of staging, graduate the driver as well. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
- 30 Aug, 2022 33 commits
-
-
Moudy Ho authored
This patch adds driver for MediaTek's Media Data Path ver.3 (MDP3). It provides the following functions: color transform, format conversion, resize, crop, rotate, flip and additional image quality enhancement. The MDP3 driver is mainly used for Google Chromebook products to import the new architecture to set the HW settings as shown below: User -> V4L2 framework -> MDP3 driver -> SCP (setting calculations) -> MDP3 driver -> CMDQ (GCE driver) -> HW Each modules' related operation control is sited in mtk-mdp3-comp.c Each modules' register table is defined in file with "mdp_reg_" prefix GCE related API, operation control sited in mtk-mdp3-cmdq.c V4L2 m2m device functions are implemented in mtk-mdp3-m2m.c Probe, power, suspend/resume, system level functions are defined in mtk-mdp3-core.c [hverkuil: add 'depends on REMOTEPROC'] Signed-off-by: Ping-Hsun Wu <ping-hsun.wu@mediatek.com> Signed-off-by: daoyuan huang <daoyuan.huang@mediatek.com> Signed-off-by: Moudy Ho <moudy.ho@mediatek.com> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Moudy Ho authored
This patch adds DT binding documentation for MediaTek's CCORR and WDMA components. These components exist in both MediaTek's Media Data Path 3(MDP3) and DRM, and the bindings are placed under the folder "./soc/mediatek" to prevent duplicate builds. Signed-off-by: Moudy Ho <moudy.ho@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Moudy Ho authored
This patch adds DT binding documents for Media Data Path 3 (MDP3) a unit in multimedia system combined with several components and used for scaling and color format convert. Signed-off-by: Moudy Ho <moudy.ho@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Miaoqian Lin authored
of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: df330515 ("[media] v4l: xilinx: Add Xilinx Video IP core") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Volodymyr Kharuk authored
Extend the xilinx video driver with Y12_1X12 greyscale format Signed-off-by: Volodymyr Kharuk <vkh@melexis.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Volodymyr Kharuk authored
Extend the csi2rxss with Y12_1X12 greyscale format Signed-off-by: Volodymyr Kharuk <vkh@melexis.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Petko Manolov authored
Some high resolution (like Sony IMX492 47Mpix) sensors requre large amount space for buffering. 64MB is far from sufficient so this patch increases the limit to 512MB. Signed-off-by: Petko Manolov <petko.manolov@konsulko.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
huanglei authored
The device does not implement the power line control correctly. Add a corresponding control mapping override. Bus 003 Device 003: ID 3277:0072 Sonix Technology Co., Ltd. USB 2.0 Camera Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x3277 idProduct 0x0072 bcdDevice 1.00 iManufacturer 2 Sonix Technology Co., Ltd. iProduct 1 USB 2.0 Camera iSerial 3 REV0001 bNumConfigurations 1 Signed-off-by: huanglei <huanglei@kylinos.cn> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Yunke Cao authored
Entity controls should get_cur using an entity-defined function instead of via a query. Fix this in uvc_ctrl_set. Fixes: 65900c58 ("media: uvcvideo: Allow entity-defined get_info and get_cur") Signed-off-by: Yunke Cao <yunkec@google.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Slark Xiao authored
Replace 'the the' with 'the' in the comment. Signed-off-by: Slark Xiao <slark_xiao@163.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Laurent Pinchart authored
As shown by the bug introduced in commit 86f7ef77 ("media: uvcvideo: Add support for per-device control mapping overrides"), the loop style used by uvc_ctrl_init_ctrl() is error-prone. Rewrite the loops to use indices instead. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
José Expósito authored
Previously the unit buffer was allocated before checking the IRQ for privacy GPIO. In case of error, the unit buffer was leaked. Allocate the unit buffer after the IRQ to avoid it. Addresses-Coverity-ID: 1474639 ("Resource leak") Fixes: 2886477f ("media: uvcvideo: Implement UVC_EXT_GPIO_UNIT") Signed-off-by: José Expósito <jose.exposito89@gmail.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Biju Das authored
The RZ/G2L VSPD provides a single VSPD instance. It has the following sub modules MAU, CTU, RPF, DPR, LUT, BRS, WPF and LIF. The VSPD block on RZ/G2L SoCs does not have a version register, so added a new compatible string "renesas,r9a07g044-vsp2" with a data pointer containing the info structure. Also the reset line is shared with the DU module. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Biju Das authored
As per HW manual V3M and RZ/G2L SoCs has nonzero LIF buffer attributes. So, introduce a feature bit for handling the same. This patch also adds separate device info structure for V3M and V3H SoCs, as both these SoCs share the same model ID, but V3H does not have VSP1_HAS_NON_ZERO_LBA feature bit. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Biju Das authored
The VSPD block on RZ/G2L SoCs does not have a version register. This patch adds support for adding VSP software version based on device match. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Biju Das authored
As the resets DT property is mandatory, and is present in all .dtsi in mainline, add support to perform deassert/assert using reference counted reset handle. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Biju Das authored
Document VSPD found in RZ/G2L SoC. VSPD block is similar to VSP2-D found on R-Car SoC's, but it does not have a version register and it has 3 clocks compared to 1 clock on vsp1 and vsp2. This patch introduces a new compatible 'renesas,r9a07g044-vsp2' to handle these differences. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Xu Qiang authored
Add the missing clk_disable_unprepare() before return from vdec_hevc_start() in the error handling case. Fixes: 823a7300 (“media: meson: vdec: add common HEVC decoder support”) Signed-off-by: Xu Qiang <xuqiang36@huawei.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Ming Qian authored
driver will enable the vpu core when request the first instance on the core. one vpu core can only support 8 streaming instances in the same time, the instance won't be added to core's list before streamon. so the actual instance count may be greater then the number in the core's list. in pm resume callback, driver will resume the core immediately if core's list is not empty. but this check is not accurate, if suspend during one instance is requested, but not streamon, then after suspend, the core won't be resume, and led to instance failure. use the request_count instead of the core's list to check whether is the core needed to resume immediately after suspend. And it can make the pm suspend and resume callback more clear. Fixes: 9f599f35 ("media: amphion: add vpu core driver") Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Hangyu Hua authored
video_unregister_device will release device internally. There is no need to call video_device_release after video_unregister_device. Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Ming Qian authored
decoder will report the colorspace information which is parsed from the sequence header, if they are unspecified, just let application to determine it, don't change it in driver. Fixes: 6de8d628 ("media: amphion: add v4l2 m2m vpu decoder stateful driver") Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Ming Qian authored
adjust the value range of gop size from [0, 65535] to [1, 8000]. when the gop size is set to a too large value, it may affect the encoded picture quality. so constrain it to a reasonable range. Fixes: 0401e659 ("media: amphion: add v4l2 m2m vpu encoder stateful driver") Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Ming Qian authored
For format vc1, the amphion vpu requires driver to help insert some custom startcode before sequence and frame. the startcode is different for vc1l and vc1g format. But the sequence startcode is only needed at the beginning, and it's not expected after seek. driver need to treat the codec header and the first frame after seek as a normal frame, and insert picture startcode for it. In previous patch, I just fix it for vc1l format, and should fix the similar issue for vc1g too. Fixes: e670f5d6 (media: amphion: only insert the first sequence startcode for vc1l format) Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Dmitry Osipenko authored
The busy status bit may never de-assert if number of programmed skip bits is incorrect, resulting in a kernel hang because the bit is polled endlessly in the code. Fix it by adding timeout for the bit-polling. This problem is reproducible by setting the data_bit_offset field of the HEVC slice params to a wrong value by userspace. Cc: stable@vger.kernel.org Fixes: 7678c546 (media: cedrus: Fix decoding for some HEVC videos) Reported-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Dmitry Osipenko authored
The cedrus_hw_resume() crashes with NULL deference on driver probe if runtime PM is disabled because it uses platform data that hasn't been set up yet. Fix this by setting the platform data earlier during probe. Cc: stable@vger.kernel.org Fixes: 50e76151 (media: platform: Add Cedrus VPU decoder driver) Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Nicolas Dufresne authored
The watchdog needs to be scheduled before we trigger the decode operation, otherwise there is a risk that the decoder IRQ will be called before we have schedule the watchdog. As a side effect, the watchdog would never be cancelled and its function would be called at an inappropriate time. This was observed while running Fluster with GStreamer as a backend. Some programming error would cause the decoder IRQ to be call very quickly after the trigger. Later calls into the driver would deadlock due to the unbalanced state. Cc: stable@vger.kernel.org Fixes: 7c38a551 ("media: cedrus: Add watchdog for job completion") Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Ezequiel Garcia authored
Now that we've transitioned all users to vb2_find_buffer API, remove the unused vb2_find_timestamp(). Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Acked-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Ezequiel Garcia authored
Use the newly introduced vb2_find_buffer API to get a vb2_buffer given a buffer timestamp. Cc: Maxime Ripard <mripard@kernel.org> Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Acked-by: Tomasz Figa <tfiga@chromium.org> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Hirokazu Honda authored
V4L2_MPEG_VIDEO_BITRATE_MODE_CBR is the only bitrate mode supported by the mediatek driver. The other bitrates must be skipped in QUERY_MENU. Fixes: d8e8aa86 ("media: mediatek: vcodec: Report supported bitrate modes") Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Yunfei Dong authored
Getting mt8188's chip name according to encoder compatible name. Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Yunfei Dong authored
1: add mt8188's compatible name: mediatek,mt8188-vcodec-dec. 2: mt8188 is lat single core architecture, using mtk_lat_sig_core_pdata to initialize private data. 3: Getting mt8188's chip name according to decoder compatible name. Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Yunfei Dong authored
Add decoder document in dt-bindings yaml file for mt8188 platform. Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-
Irui Wang authored
There is only one device mutex to lock vb2_queue when running multi-instance encoding, it can be set by each encoder context. [hverkuil: fix q_mutex documentation in the header] Signed-off-by: Irui Wang <irui.wang@mediatek.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-