- 22 Oct, 2021 10 commits
-
-
Sean Christopherson authored
Paul pointed out the error messages when KVM fails to load are unhelpful in understanding exactly what went wrong if userspace probes the "wrong" module. Add a mandatory kvm_x86_ops field to track vendor module names, kvm_intel and kvm_amd, and use the name for relevant error message when KVM fails to load so that the user knows which module failed to load. Opportunistically tweak the "disabled by bios" error message to clarify that _support_ was disabled, not that the module itself was magically disabled by BIOS. Suggested-by:
Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by:
Sean Christopherson <seanjc@google.com> Message-Id: <20211018183929.897461-2-seanjc@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Junaid Shahid authored
Currently, the NX huge page recovery thread wakes up every minute and zaps 1/nx_huge_pages_recovery_ratio of the total number of split NX huge pages at a time. This is intended to ensure that only a relatively small number of pages get zapped at a time. But for very large VMs (or more specifically, VMs with a large number of executable pages), a period of 1 minute could still result in this number being too high (unless the ratio is changed significantly, but that can result in split pages lingering on for too long). This change makes the period configurable instead of fixing it at 1 minute. Users of large VMs can then adjust the period and/or the ratio to reduce the number of pages zapped at one time while still maintaining the same overall duration for cycling through the entire list. By default, KVM derives a period from the ratio such that a page will remain on the list for 1 hour on average. Signed-off-by:
Junaid Shahid <junaids@google.com> Message-Id: <20211020010627.305925-1-junaids@google.com> Signed-off-by:
-
Wanpeng Li authored
SDM section 18.2.3 mentioned that: "IA32_PERF_GLOBAL_OVF_CTL MSR allows software to clear overflow indicator(s) of any general-purpose or fixed-function counters via a single WRMSR." It is R/W mentioned by SDM, we read this msr on bare-metal during perf testing, the value is always 0 for ICX/SKX boxes on hands. Let's fill get_msr MSR_CORE_PERF_GLOBAL_OVF_CTRL w/ 0 as hardware behavior and drop global_ovf_ctrl variable. Tested-by:
Like Xu <likexu@tencent.com> Signed-off-by:
Wanpeng Li <wanpengli@tencent.com> Message-Id: <1634631160-67276-2-git-send-email-wanpengli@tencent.com> Signed-off-by:
-
David Matlack authored
slot_handle_leaf is a misnomer because it only operates on 4K SPTEs whereas "leaf" is used to describe any valid terminal SPTE (4K or large page). Rename slot_handle_leaf to slot_handle_level_4k to avoid confusion. Making this change makes it more obvious there is a benign discrepency between the legacy MMU and the TDP MMU when it comes to dirty logging. The legacy MMU only iterates through 4K SPTEs when zapping for collapsing and when clearing D-bits. The TDP MMU, on the other hand, iterates through SPTEs on all levels. The TDP MMU behavior of zapping SPTEs at all levels is technically overkill for its current dirty logging implementation, which always demotes to 4k SPTES, but both the TDP MMU and legacy MMU zap if and only if the SPTE can be replaced by a larger page, i.e. will not spuriously zap 2m (or larger) SPTEs. Opportunistically add comments to explain this discrepency in the code. Signed-off-by:
David Matlack <dmatlack@google.com> Message-Id: <20211019162223.3935109-1-dmatlack@google.com> Signed-off-by:
-
Xiaoyao Li authored
Per Intel SDM, RTIT_CTL_BRANCH_EN bit has no dependency on any CPUID leaf 0x14. Signed-off-by:
Xiaoyao Li <xiaoyao.li@intel.com> Message-Id: <20210827070249.924633-5-xiaoyao.li@intel.com> Signed-off-by:
-
Xiaoyao Li authored
To better self explain the meaning of this field and match the PT_CAP_num_address_ranges constatn. Suggested-by:
-
Xiaoyao Li authored
The number of valid PT ADDR MSRs for the guest is precomputed in vmx->pt_desc.addr_range. Use it instead of calculating again. Signed-off-by:
-
Xiaoyao Li authored
A minor optimization to WRMSR MSR_IA32_RTIT_CTL when necessary. Opportunistically refine the comment to call out that KVM requires VM_EXIT_CLEAR_IA32_RTIT_CTL to expose PT to the guest. Reviewed-by:
-
Paolo Bonzini authored
"prefetch", "prefault" and "speculative" are used throughout KVM to mean the same thing. Use a single name, standardizing on "prefetch" which is already used by various functions such as direct_pte_prefetch, FNAME(prefetch_gpte), FNAME(pte_prefetch), etc. Suggested-by:
-
David Stevens authored
Unify the flags for rmaps and page tracking data, using a single flag in struct kvm_arch and a single loop to go over all the address spaces and memslots. This avoids code duplication between alloc_all_memslots_rmaps and kvm_page_track_enable_mmu_write_tracking. Signed-off-by:
David Stevens <stevensd@chromium.org> [This patch is the delta between David's v2 and v3, with conflicts fixed and my own commit message. - Paolo] Co-developed-by:
-
- 18 Oct, 2021 13 commits
-
-
Oliver Upton authored
Introduce a KVM selftest to verify that userspace manipulation of the TSC (via the new vCPU attribute) results in the correct behavior within the guest. Reviewed-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
Oliver Upton <oupton@google.com> Message-Id: <20210916181555.973085-6-oupton@google.com> Signed-off-by:
-
Oliver Upton authored
vCPU file descriptors are abstracted away from test code in KVM selftests, meaning that tests cannot directly access a vCPU's device attributes. Add helpers that tests can use to get at vCPU device attributes. Reviewed-by:
-
Oliver Upton authored
The KVM_CREATE_DEVICE and KVM_{GET,SET}_DEVICE_ATTR ioctls are defined to return a value of zero on success. As such, tighten the assertions in the helper functions to only pass if the return code is zero. Suggested-by: -
Oliver Upton authored
Add a selftest for the new KVM clock UAPI that was introduced. Ensure that the KVM clock is consistent between userspace and the guest, and that the difference in realtime will only ever cause the KVM clock to advance forward. Cc: Andrew Jones <drjones@redhat.com> Signed-off-by:
-
Oliver Upton authored
Copy over approximately clean versions of the pvclock headers into tools. Reconcile headers/symbols missing in tools that are unneeded. Signed-off-by:
-
Oliver Upton authored
To date, VMM-directed TSC synchronization and migration has been a bit messy. KVM has some baked-in heuristics around TSC writes to infer if the VMM is attempting to synchronize. This is problematic, as it depends on host userspace writing to the guest's TSC within 1 second of the last write. A much cleaner approach to configuring the guest's views of the TSC is to simply migrate the TSC offset for every vCPU. Offsets are idempotent, and thus not subject to change depending on when the VMM actually reads/writes values from/to KVM. The VMM can then read the TSC once with KVM_GET_CLOCK to capture a (realtime, host_tsc) pair at the instant when the guest is paused. Cc: David Matlack <dmatlack@google.com> Cc: Sean Christopherson <seanjc@google.com> Signed-off-by:
-
Oliver Upton authored
Refactor kvm_synchronize_tsc to make a new function that allows callers to specify TSC parameters (offset, value, nanoseconds, etc.) explicitly for the sake of participating in TSC synchronization. Signed-off-by:
-
Paolo Bonzini authored
Protect the reference point for kvmclock with a seqcount, so that kvmclock updates for all vCPUs can proceed in parallel. Xen runstate updates will also run in parallel and not bounce the kvmclock cacheline. Of the variables that were protected by pvclock_gtod_sync_lock, nr_vcpus_matched_tsc is different because it is updated outside pvclock_update_vm_gtod_copy and read inside it. Therefore, we need to keep it protected by a spinlock. In fact it must now be a raw spinlock, because pvclock_update_vm_gtod_copy, being the write-side of a seqcount, is non-preemptible. Since we already have tsc_write_lock which is a raw spinlock, we can just use tsc_write_lock as the lock that protects the write-side of the seqcount. Co-developed-by:
-
Oliver Upton authored
Handling the migration of TSCs correctly is difficult, in part because Linux does not provide userspace with the ability to retrieve a (TSC, realtime) clock pair for a single instant in time. In lieu of a more convenient facility, KVM can report similar information in the kvm_clock structure. Provide userspace with a host TSC & realtime pair iff the realtime clock is based on the TSC. If userspace provides KVM_SET_CLOCK with a valid realtime value, advance the KVM clock by the amount of elapsed time. Do not step the KVM clock backwards, though, as it is a monotonic oscillator. Suggested-by:
-
Paolo Bonzini authored
This is a new warning in clang top-of-tree (will be clang 14): In file included from arch/x86/kvm/mmu/mmu.c:27: arch/x86/kvm/mmu/spte.h:318:9: error: use of bitwise '|' with boolean operands [-Werror,-Wbitwise-instead-of-logical] return __is_bad_mt_xwr(rsvd_check, spte) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ || arch/x86/kvm/mmu/spte.h:318:9: note: cast one or both operands to int to silence this warning The code is fine, but change it anyway to shut up this clever clogs of a compiler. Reported-by: torvic9@mailbox.org Signed-off-by: -
Paolo Bonzini authored
-
Paolo Bonzini authored
If allocation of rmaps fails, but some of the pointers have already been written, those pointers can be cleaned up when the memslot is freed, or even reused later for another attempt at allocating the rmaps. Therefore there is no need to WARN, as done for example in memslot_rmap_alloc, but the allocation *must* be skipped lest KVM will overwrite the previous pointer and will indeed leak memory. Signed-off-by: -
Andrei Vagin authored
This looks like a typo in 8f32d5e5. This change didn't intend to do any functional changes. The problem was caught by gVisor tests. Fixes: 8f32d5e5 ("KVM: x86/mmu: allow kvm_faultin_pfn to return page fault handling code") Cc: Maxim Levitsky <mlevitsk@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Andrei Vagin <avagin@gmail.com> Message-Id: <20211015163221.472508-1-avagin@gmail.com> Signed-off-by:
-
- 15 Oct, 2021 2 commits
-
-
Paolo Bonzini authored
Merge tag 'kvmarm-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.15, take #2 - Properly refcount pages used as a concatenated stage-2 PGD - Fix missing unlock when detecting the use of MTE+VM_SHARED
-
Paolo Bonzini authored
The size of the data in the scratch buffer is not divided by the size of each port I/O operation, so vcpu->arch.pio.count ends up being larger than it should be by a factor of size. Cc: stable@vger.kernel.org Fixes: 7ed9abfe ("KVM: SVM: Support string IO operations for an SEV-ES guest") Acked-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
- 05 Oct, 2021 4 commits
-
-
Quentin Perret authored
VM_SHARED mappings are currently forbidden in a memslot with MTE to prevent two VMs racing to sanitise the same page. However, this check is performed while holding current->mm's mmap_lock, but fails to release it. Fix this by releasing the lock when needed. Fixes: ea7fc1bb ("KVM: arm64: Introduce MTE VM feature") Signed-off-by:
Quentin Perret <qperret@google.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211005122031.809857-1-qperret@google.com
-
Quentin Perret authored
Some of the refcount manipulation helpers used at EL2 are instrumented to catch a corrupted state, but not all of them are treated equally. Let's make things more consistent by instrumenting hyp_page_ref_dec_and_test() as well. Acked-by:
Will Deacon <will@kernel.org> Suggested-by:
-
Quentin Perret authored
The KVM page-table library refcounts the pages of concatenated stage-2 PGDs individually. However, when running KVM in protected mode, the host's stage-2 PGD is currently managed by EL2 as a single high-order compound page, which can cause the refcount of the tail pages to reach 0 when they shouldn't, hence corrupting the page-table. Fix this by introducing a new hyp_split_page() helper in the EL2 page allocator (matching the kernel's split_page() function), and make use of it from host_s2_zalloc_pages_exact(). Fixes: 1025c8c0 ("KVM: arm64: Wrap the host with a stage 2") Acked-by:
-
git://github.com/kvm-riscv/linuxPaolo Bonzini authored
Initial KVM RISC-V support Following features are supported by the initial KVM RISC-V support: 1. No RISC-V specific KVM IOCTL 2. Loadable KVM RISC-V module 3. Minimal possible KVM world-switch which touches only GPRs and few CSRs 4. Works on both RV64 and RV32 host 5. Full Guest/VM switch via vcpu_get/vcpu_put infrastructure 6. KVM ONE_REG interface for VCPU register access from KVM user-space 7. Interrupt controller emulation in KVM user-space 8. Timer and IPI emuation in kernel 9. Both Sv39x4 and Sv48x4 supported for RV64 host 10. MMU notifiers supported 11. Generic dirty log supported 12. FP lazy save/restore supported 13. SBI v0.1 emulation for Guest/VM 14. Forward unhandled SBI calls to KVM user-space 15. Hugepage support for Guest/VM 16. IOEVENTFD support for Vhost
-
- 04 Oct, 2021 11 commits
-
-
Anup Patel authored
Add myself as maintainer for KVM RISC-V and Atish as designated reviewer. Signed-off-by:
Atish Patra <atish.patra@wdc.com> Signed-off-by:
Anup Patel <anup.patel@wdc.com> Acked-by:
Alexander Graf <graf@amazon.com> Acked-by:
Palmer Dabbelt <palmerdabbelt@google.com>
-
Anup Patel authored
Document RISC-V specific parts of the KVM API, such as: - The interrupt numbers passed to the KVM_INTERRUPT ioctl. - The states supported by the KVM_{GET,SET}_MP_STATE ioctls. - The registers supported by the KVM_{GET,SET}_ONE_REG interface and the encoding of those register ids. - The exit reason KVM_EXIT_RISCV_SBI for SBI calls forwarded to userspace tool. CC: Jonathan Corbet <corbet@lwn.net> CC: linux-doc@vger.kernel.org Signed-off-by: -
Atish Patra authored
The KVM host kernel is running in HS-mode needs so we need to handle the SBI calls coming from guest kernel running in VS-mode. This patch adds SBI v0.1 support in KVM RISC-V. Almost all SBI v0.1 calls are implemented in KVM kernel module except GETCHAR and PUTCHART calls which are forwarded to user space because these calls cannot be implemented in kernel space. In future, when we implement SBI v0.2 for Guest, we will forward SBI v0.2 experimental and vendor extension calls to user space. Signed-off-by:
-
Atish Patra authored
Add a KVM_GET_ONE_REG/KVM_SET_ONE_REG ioctl interface for floating point registers such as F0-F31 and FCSR. This support is added for both 'F' and 'D' extensions. Signed-off-by:
-
Atish Patra authored
This patch adds floating point (F and D extension) context save/restore for guest VCPUs. The FP context is saved and restored lazily only when kernel enter/exits the in-kernel run loop and not during the KVM world switch. This way FP save/restore has minimal impact on KVM performance. Signed-off-by:
-
Atish Patra authored
The RISC-V hypervisor specification doesn't have any virtual timer feature. Due to this, the guest VCPU timer will be programmed via SBI calls. The host will use a separate hrtimer event for each guest VCPU to provide timer functionality. We inject a virtual timer interrupt to the guest VCPU whenever the guest VCPU hrtimer event expires. This patch adds guest VCPU timer implementation along with ONE_REG interface to access VCPU timer state from user space. Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by:
-
Anup Patel authored
This patch implements MMU notifiers for KVM RISC-V so that Guest physical address space is in-sync with Host physical address space. This will allow swapping, page migration, etc to work transparently with KVM RISC-V. Signed-off-by:
-
Anup Patel authored
This patch implements all required functions for programming the stage2 page table for each Guest/VM. At high-level, the flow of stage2 related functions is similar from KVM ARM/ARM64 implementation but the stage2 page table format is quite different for KVM RISC-V. [jiangyifei: stage2 dirty log support] Signed-off-by:
Yifei Jiang <jiangyifei@huawei.com> Signed-off-by:
-
Anup Patel authored
We implement a simple VMID allocator for Guests/VMs which: 1. Detects number of VMID bits at boot-time 2. Uses atomic number to track VMID version and increments VMID version whenever we run-out of VMIDs 3. Flushes Guest TLBs on all host CPUs whenever we run-out of VMIDs 4. Force updates HW Stage2 VMID for each Guest VCPU whenever VMID changes using VCPU request KVM_REQ_UPDATE_HGATP Signed-off-by:
-
Anup Patel authored
We get illegal instruction trap whenever Guest/VM executes WFI instruction. This patch handles WFI trap by blocking the trapped VCPU using kvm_vcpu_block() API. The blocked VCPU will be automatically resumed whenever a VCPU interrupt is injected from user-space or from in-kernel IRQCHIP emulation. Signed-off-by:
-
Anup Patel authored
We will get stage2 page faults whenever Guest/VM access SW emulated MMIO device or unmapped Guest RAM. This patch implements MMIO read/write emulation by extracting MMIO details from the trapped load/store instruction and forwarding the MMIO read/write to user-space. The actual MMIO emulation will happen in user-space and KVM kernel module will only take care of register updates before resuming the trapped VCPU. The handling for stage2 page faults for unmapped Guest RAM will be implemeted by a separate patch later. [jiangyifei: ioeventfd and in-kernel mmio device support] Signed-off-by:
-
