- 19 Jul, 2008 1 commit
-
-
Michael Hennerich authored
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
-
- 26 Jul, 2008 2 commits
-
-
Robin Getz authored
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
-
Michael Hennerich authored
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
-
- 19 Jul, 2008 6 commits
-
-
Michael Hennerich authored
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
-
Mike Frysinger authored
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
-
Graf Yang authored
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
-
Sonic Zhang authored
Extend system call to alloc L2 SRAM in application. Automatically move following sections to L2 SRAM: 1. kernel built-in l2 attribute section 2. kernel module l2 attribute section 3. elf-fdpic application l2 attribute section Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
-
Robin Getz authored
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
-
Sonic Zhang authored
Remove the sram piece limitation and improve the performance to alloc/free sram piece data. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
-
- 16 Jul, 2008 1 commit
-
-
Mike Frysinger authored
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
-
- 19 Jul, 2008 1 commit
-
-
Yi Li authored
Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
-
- 15 Jul, 2008 1 commit
-
-
Jie Zhang authored
Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
-
- 16 Jul, 2008 1 commit
-
-
Michael Hennerich authored
Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
-
- 19 Jul, 2008 1 commit
-
-
Michael Hennerich authored
Enable: PM_SUSPEND_MEM -> Blackfin Hibernate to SDRAM This feature requires a special bootloader (u-boot) supporting return from hibernate. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
-
- 15 Jul, 2008 2 commits
-
-
Michael Hennerich authored
Use long jump Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
-
Bryan Wu authored
Signed-off-by: Bryan Wu <cooloney@kernel.org>
-
- 14 Jul, 2008 1 commit
-
-
Mike Frysinger authored
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
-
- 26 Jul, 2008 1 commit
-
-
Sonic Zhang authored
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
-
- 14 Jul, 2008 5 commits
-
-
Michael Hennerich authored
use kernel command line mem and max_mem bootargs to limit availabe memory instead. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
-
Mike Frysinger authored
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
-
Michael Hennerich authored
Don't write conflicting data to EBIU_SDBCTL after the SDRAM is configured. This can cause data corruption, since we might change SDRAM row and column addressing modes. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
-
Mike Frysinger authored
Blackfin arch: Fix bug - do not overflow the buffer given to us which tends to happen when CONFIG_L1_MAX_PIECE is increased past its default Singed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
-
Michael Hennerich authored
- Implement irq_chip.enable and irq_chip.disable Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
-
- 25 Jun, 2008 1 commit
-
-
Mike Frysinger authored
Blackfin arch: use the generic platform nand driver to support nand flash on bf53x board which do not have on-chip nand flash controller Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
-
- 13 Jul, 2008 6 commits
-
-
Linus Torvalds authored
-
Li Zefan authored
# cat devices.list c 1:3 r # echo 'c 1:3 w' > sub/devices.allow # cat sub/devices.list c 1:3 w As illustrated, the parent group has no write permission to /dev/null, so it's child should not be allowed to add this write permission. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Serge Hallyn <serue@us.ibm.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Li Zefan authored
# echo "b $((0x7fffffff)):$((0x80000000)) rwm" > devices.allow # cat devices.list b 214748364:-21474836 rwm though a major/minor number of 0x800000000 is meaningless, we should not cast it to a negative value. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Serge Hallyn <serue@us.ibm.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jiri Pirko authored
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: cpusets, hotplug, scheduler: fix scheduler domain breakage
-
Dmitry Adamushko authored
Commit f18f982a ("sched: CPU hotplug events must not destroy scheduler domains created by the cpusets") introduced a hotplug-related problem as described below: Upon CPU_DOWN_PREPARE, update_sched_domains() -> detach_destroy_domains(&cpu_online_map) does the following: /* * Force a reinitialization of the sched domains hierarchy. The domains * and groups cannot be updated in place without racing with the balancing * code, so we temporarily attach all running cpus to the NULL domain * which will prevent rebalancing while the sched domains are recalculated. */ The sched-domains should be rebuilt when a CPU_DOWN ops. has been completed, effectively either upon CPU_DEAD{_FROZEN} (upon success) or CPU_DOWN_FAILED{_FROZEN} (upon failure -- restore the things to their initial state). That's what update_sched_domains() also does but only for !CPUSETS case. With f18f982a, sched-domains' reinitialization is delegated to CPUSETS code: cpuset_handle_cpuhp() -> common_cpu_mem_hotplug_unplug() -> rebuild_sched_domains() Being called for CPU_UP_PREPARE and if its callback is called after update_sched_domains()), it just negates all the work done by update_sched_domains() -- i.e. a soon-to-be-offline cpu is included in the sched-domains and that makes it visible for the load-balancer while the CPU_DOWN ops. is in progress. __migrate_live_tasks() moves the tasks off a 'dead' cpu (it's already "offline" when this function is called). try_to_wake_up() is called for one of these tasks from another CPU -> the load-balancer (wake_idle()) picks up a "dead" CPU and places the task on it. Then e.g. BUG_ON(rq->nr_running) detects this a bit later -> oops. Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com> Tested-by: Vegard Nossum <vegard.nossum@gmail.com> Cc: Paul Menage <menage@google.com> Cc: Max Krasnyansky <maxk@qualcomm.com> Cc: Paul Jackson <pj@sgi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: miaox@cn.fujitsu.com Cc: rostedt@goodmis.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
- 12 Jul, 2008 10 commits
-
-
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: fix ldt limit for 64 bit
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] bsg: fix oops on remove [SCSI] fusion: default MSI to disabled for SPI and FC controllers [SCSI] ipr: Fix HDIO_GET_IDENTITY oops for SATA devices [SCSI] mptspi: fix oops in mptspi_dv_renegotiate_work() [SCSI] erase invalid data returned by device
-
Jeff Layton authored
The current definition of wksidarr works fine on little endian arches (since cpu_to_le32 is a no-op there), but on big-endian arches, it fails to compile with this error: error: braced-group within expression allowed only inside a function The problem is that this static declaration has cpu_to_le32 embedded within it, and that expands into a function macro. We need to use __constant_cpu_to_le32() instead. Signed-off-by: Jeff Layton <jlayton@redhat.com> Cc: Steven French <sfrench@us.ibm.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jeff Layton authored
Try this: mount a share with unix extensions create a file on it umount the share You'll get the following message in the ring buffer: VFS: Busy inodes after unmount of cifs. Self-destruct in 5 seconds. Have a nice day... ...the problem is that cifs_get_inode_info_unix is creating and hashing a new inode even when it's going to return error anyway. The first lookup when creating a file returns an error so we end up leaking this inode before we do the actual create. This appears to be a regression caused by commit 0e4bbde9. The following patch seems to fix it for me, and fixes a minor formatting nit as well. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Steven French <sfrench@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Howells authored
Fix FRV irqs_disabled() to return an int, not an unsigned long to avoid this warning: kernel/sched.c: In function '__might_sleep': kernel/sched.c:8198: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int' Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Robert Richter authored
Cc: Philippe Elie <phil.el@wanadoo.fr> Cc: John Levon <levon@movementarian.org> Cc: Maynard Johnson <maynardj@us.ibm.com> Cc: Richard Purdie <rpurdie@openedhand.com> Cc: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com> Cc: Jason Yeh <jason.yeh@amd.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jon Smirl authored
Add the rtc8564 chip entry Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alessandro Zummo authored
Fix chip naming from fm3031-rtc to fm3031 Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Sergey Lapin <slapin@ossfans.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andres Salomon authored
Cortland Setlow pointed out a bug in ov7670.c where the result from ov7670_read() was just being checked for !0, rather than <0. This made me realize that ov7670_read's semantics were rather confusing; it both fills in 'value' with the result, and returns it. This is goes against general kernel convention; so rather than fixing callers, let's fix the function. This makes ov7670_read return <0 in the case of an error, and 0 upon success. Thus, code like: res = ov7670_read(...); if (!res) goto error; ..will work properly. Signed-off-by: Cortland Setlow <csetlow@tower-research.com> Signed-off-by: Andres Salomon <dilinger@debian.org> Acked-by: Jonathan Corbet <corbet@lwn.net> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Eric W. Biederman authored
I had 8250.nr_uarts=16 in the boot line of a test kernel and I had a weird mysterious crash in sysfs. After taking an in-depth look I realized that CONFIG_SERIAL_8250_NR_UARTS was set to 4 and I was walking off the end of the serial8250_ports array. Ouch!!! Don't let this happen to someone else. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Alan Cox <alan@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-