Pin widgets have always one amp-input value regardless of number of
connections.  The proc file showed values wrongly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The capture source selection for ADC list with two elements is buggy
becaues of a wrong capture mux list.  This patch fixes the starting
index based on spec->num_adc_nids.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The widget list of capture source selection for ALC883 contains the
wrong NIDs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Don't create vmaster controls if no slaves are found in the given list.
This prevents the error due to an empty vmaster control.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Attached patch fix race condition in hd_codec generic bound volume/swtich
controls

oops on this bug can be easy reproduced by two mixer apps on SMP system with
PREEMPT kernel

dmesg:

 ALSA /home/ss/ALSA/alsa-driver-1.0.16/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:596:
 hda_intel: azx_get_response timeout, switching to polling mode: las
 t cmd=0x014f0900
 BUG: unable to handle kernel paging request at virtual address 00070006
 printing eip: f8f43e95 *pde = 00000000
 Oops: 0000 [#1] PREEMPT SMP
 Modules linked in: i915 drm snd_seq_dummy snd_seq_oss snd_seq_midi_event
 snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss bnep rfcomm hidp l2cap
 bluetooth w
 lan_wep acpi_cpufreq coretemp hwmon mmc_block pcspkr psmouse wlan_scan_sta
 ath_rate_sample snd_hda_intel ath_pci serio_raw wlan tg3 sdhci snd_pcm
 firewire_o
 hci mmc_core i2c_i801 snd_timer firewire_core snd_page_alloc ath_hal(P)
 snd_hwdep snd iTCO_wdt crc_itu_t iTCO_vendor_support shpchp video output
 acer_acpi b
 acklight led_class wmi_acer

 Pid: 3969, comm: gkrellm Tainted: P        (2.6.24-jm #4)
 EIP: 0060:[<f8f43e95>] EFLAGS: 00010292 CPU: 0
 EIP is at snd_hda_mixer_bind_ctls_info+0x20/0x43 [snd_hda_intel]
 EAX: 00000000 EBX: f7478e00 ECX: f763e000 EDX: f764f788
 ESI: 00070002 EDI: edce5e00 EBP: edc3fe64 ESP: edc3fe54
  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
 Process gkrellm (pid: 3969, ti=edc3e000 task=f1e4e000 task.ti=edc3e000)
 Stack: f764f77c f7478e00 edce5e00 f6dd6000 edc3fe84 f8e590e8 edc7a239 f6d14034
       f764f34c f6c0f7e0 edc3ff30 f6d14034 edc3fea8 f8e591b7 edc3ff30 edc3ff2c
       00000000 f70aa668 f6d14034 f8e59165 bfbfadb0 edc3ff40 f8e587aa edc3ff2c
 Call Trace:
 [<c0104fbb>] show_trace_log_lvl+0x1a/0x2f
 [<c010506d>] show_stack_log_lvl+0x9d/0xa5
 [<c0105119>] show_registers+0xa4/0x1bd
 [<c0105354>] die+0x122/0x206
 [<c03daccc>] do_page_fault+0x535/0x623
 [<c03d940a>] error_code+0x72/0x78
 [<f8e590e8>] snd_mixer_oss_get_volume1_vol+0x74/0xf1 [snd_mixer_oss]
 [<f8e591b7>] snd_mixer_oss_get_volume1+0x52/0xa5 [snd_mixer_oss]
 [<f8e587aa>] snd_mixer_oss_ioctl1+0x673/0x71e [snd_mixer_oss]
 [<f8e588af>] snd_mixer_oss_ioctl+0xb/0xd [snd_mixer_oss]
 [<c017af0a>] do_ioctl+0x22/0x67
 [<c017b186>] vfs_ioctl+0x237/0x24a
 [<c017b1ca>] sys_ioctl+0x31/0x4b
 [<c010402e>] syscall_call+0x7/0xb
 =======================
 Code: 3f 49 c7 89 f8 59 5b 5e 5f 5d c3 55 89 e5 57 89 d7 56 53 89 c3 83 ec 04
 8b 70 5c 8b 40 60 05 7c 01 00 00 89 45 f0 e8 c0 3f 49 c7 <8b> 46 04 89 fa 89
 4
 3 5c 89 d8 8b 0e ff 11 89 73 5c 89 c7 8b 45
 EIP: [<f8f43e95>] snd_hda_mixer_bind_ctls_info+0x20/0x43 [snd_hda_intel]
 SS:ESP 0068:edc3fe54
 ---[ end trace 0a20bc209e9397cc ]---

similar issue report present in ALSA bugtracking system
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3652Signed-off-by: Serge A. Suchkov <Serge.A.S@tochka.ru>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In linus' git tree I found this problem. Is it also in the alsa tree?
please confirm it's the right fix. The patch was not yet tested.
Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The GPIO pin 0 of the CM9780 must be set when muting the line input even
on non-Xonar cards.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fixed the SPDIF output on Conexant Cx5045 codec.  Added the missing
pin output setting and fixed the wrong NID for digital audio-out widget.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch enables snoop on Intel SCH chipset, eliminating static during
playback.
Signed-off-by: Tobin Davis <tdavis@dsl-only.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Removed invalid __devinit from hdsp_request_fw_loader() and
snd_hwdep_create_hwdep() that aren't always init functions.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Removed invalid __devinit and __devexit that are remaining after
split to a helper module.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The driver resubmits URBs from an error handler and schedules the error
handler from the URBs' completion handlers. To reliably kill the cycle
a flag must be used.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add proper ifdef's to the patch loading code moved from the old instr
layer so that opl3 driver can be compiled without the sequencer support.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It's always been broken, but recent fixes actually made it do something,
and now the brokenness shows up as the resulting kernel simply not
working at all.

So it used to be that you could enable this config option, and it just
didn't do anything.  Now we'd better stop people from enabling it by
mistake, since it _does_ do something, but does it so badly as to be
unusable.

Code to actually make it work is pending, but incomplete and won't be
merged into 2.6.25 in any case.
Acked-by: Arjan van de Ven <arjan@infradead.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: James Morris <jmorris@namei.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Simple typo fix for regression introduced by the user_regset changes.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'hotfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  Wrap buffers used for rpc debug printks into RPC_IFDEBUG
  nfs: fix sparse warnings
  NFS: flush signals before taking down callback thread

Fix macro argument substitution in PageHead() and PageTail() - 'page' should
have brackets surrounding it (commit 6d777953).
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Shannon Nelson replaced by Maciej Sosnowski in maintanance of
INTEL I/OAT DMA DRIVER, DMA GENERIC ENGINE SUBSYSTEM
and ASYNCHRONOUS TRANSFERS/TRANSFORMS API.
Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6:
  hwmon: normal_i2c arrays should be const
  hwmon: New driver for Analog Devices ADT7473 sensor chip
  hwmon: (coretemp) Add Penryn CPU to coretemp
  hwmon: (coretemp) Add TjMax detection for mobile CPUs
  hwmon: (applesmc) sensors set for MacBook2
  hwmon: (thmc50) Storage class should be before const qualifier
  hwmon: (coretemp) fix section mismatch warning
  hwmon: (coretemp) Add maximum cooling temperature readout
  hwmon: (adm1026) Properly terminate sysfs groups
  hwmon: (vt8231) Update maintainer email address
  hwmon: (vt8231) Add individual alarm files
  hwmon: (via686a) Add individual alarm files
  hwmon: (smsc47m1) Add individual alarm files
  hwmon: (max1619) Add individual alarm and fault files
  hwmon: (lm92) Add individual alarm files

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (26 commits)
  PM: Make suspend_device() static
  PCI ACPI: Fix comment describing acpi_pci_choose_state
  Hibernation: Handle DEBUG_PAGEALLOC on x86
  ACPI: fix build warning
  ACPI: TSC breaks atkbd suspend
  ACPI: remove is_processor_present prototype
  acer-wmi: Add DMI match for mail LED on Acer TravelMate 4200 series
  ACPI: sparse fix, replace macro with static function
  ACPI: thinkpad-acpi: add tablet-mode reporting
  ACPI: thinkpad-acpi: minor hotkey_radio_sw fixes
  ACPI: thinkpad-acpi: improve thinkpad-acpi input device documentation
  ACPI: thinkpad-acpi: issue input events for tablet swivel events
  ACPI: thinkpad-acpi: make the video output feature optional
  ACPI: thinkpad-acpi: synchronize input device switches
  ACPI: thinkpad-acpi: always track input device open/close
  ACPI: thinkpad-acpi: trivial fix to documentation
  ACPI: thinkpad-acpi: trivial fix to module_desc typo
  intel_menlo: extract return values using PTR_ERR
  ACPI video: check for error from thermal_cooling_device_register
  ACPI thermal: extract return values using PTR_ERR
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6:
  modules: do not try to add sysfs attributes if !CONFIG_SYSFS
  POWERPC: fix typo in pseries/power.c
  PM: Remove unbalanced mutex_unlock() from dpm_resume()
  UIO: fix Greg's stupid changes
  stable_kernel_rules: fix must already be in mainline
  ide: mark "ide=reverse" option as obsolete
  Driver core: Fix error handling in bus_add_driver().
  driver-core: fix kernel-doc function parameters
  cpufreq: fix kobject reference count handling
  slabinfo: fall back from /sys/kernel/slab to /sys/slab
  Fix broken utf-8 encodings in ja_JP translation of stable_kernel_rules.txt

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6:
  PCI: Fix wrong reference counter check for proc_dir_entry
  PCI: fix up setup-bus.c #ifdef
  PCI: don't load acpi_php when acpi is disabled
  PCI: quirks: set 'En' bit of MSI Mapping for devices onHT-based nvidia platform
  PCI: kernel-doc: fix pci-acpi warning
  PCI: irq: patch for Intel ICH10 DeviceID's
  PCI: pci_ids: patch for Intel ICH10 DeviceID's
  PCI: AMD SATA IDE mode quirk
  PCI: drivers/pcmcia/i82092.c: fix up after pci_bus_region changes
  PCI: hotplug: acpiphp_ibm: Remove get device information

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (23 commits)
  ehci-fsl: add PPC_MPC837x to default y
  USB: POWERPC: ehci: fix ppc build
  USB: usb-storage: don't access beyond the end of the sg buffer
  USB: quirks and unusual_devs entry for Actions flash drive
  USB: usb-storage: unusual_devs entry for Oracom MP3 player
  USB: serial: move zte MF330 from sierra to option
  USB: add new vernier product id to ldusb.c
  USB: gadget: queue usb USB_CDC_GET_ENCAPSULATED_RESPONSE message
  USB: Add another Novatel U727 ID to the device table for usbserial
  USB: storage: Nikon D80 new FW still needs Fixup
  USB: usb-storage: don't clear-halt when Get-Max-LUN stalls
  USB: option: Added vendor id for Dell 5720 broadband modem
  USB: option: Add Kyocera KPC680 ids
  USB: quirks for known quirky audio devices
  USB: fix previous sparse fix which was incorrect
  USB: fix error handling in trancevibrator
  USB: g_printer, fix empty if statement
  USB: ehci-fsl: mpc834x config symbol is PPC_MPC834x, not MPC834x
  USB: fix usb open suspend race in cdc-acm
  USB: usb: yet another Dell wireless CDMA/EVDO modem
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: update git tree in MAINTAINERS
  dlm: fix rcom_names message to self

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 4835/1: Fix stale comment in struct machine_desc description
  [ARM] 4829/1: add .get method to pxa-cpufreq to silence a warning
  [ARM] 4828/1: fix 3 warnings in drivers/video/pxafb.c
  [ARM] 4827/1: fix two warnings in drivers/i2c/busses/i2c-pxa.c
  [ARM] 4826/1: Orion: Register the RTC interrupt on the TS-209
  [ARM] pxa: fix clock lookup to find specific device clocks

The below implements the getgeo hook for Xen block devices. Extracted
from the xen-unstable tree where it has been used for ages.

It is useful to have because it allows things like grub2 (used by the
Debian installer images) to work in a guest domain without having to
sprinkle Xen specific hacks around the place.
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] pasemi: Remove warning in mpic_pasemi_msi.c
  [POWERPC] pasemi: Register i2c devices at boot
  [POWERPC] cell: fix spurious false return from spu_trap_data_{map,seg}
  [POWERPC] Fix warning in pseries/power.c
  [POWERPC] Fix bootwrapper builds with older gcc versions
  [POWERPC] Fix dt_mem_next_cell() to read the full address
  [POWERPC] Kill sparse warnings in kprobes
  [POWERPC] spufs: fix scheduler starvation by idle contexts
  [POWERPC] 44x: Add multiplatform defconfig
  [POWERPC] 44x: Fix Kconfig formatting
  [POWERPC] 4xx: Update defconfigs for 2.6.25
  [POWERPC] 4xx: Remove "i2c" and "xxmii-interface" device_types from dts
  [POWERPC] PPC440EP Interrupt Triggering and Level Settings
  [POWERPC] net: NEWEMAC: Remove "rgmii-interface" from rgmii matching table

Sorry for the noise, but here's the v3 of this compilation fix :)

There are some places, which declare the char buf[...] on the stack
to push it later into dprintk(). Since the dprintk sometimes (if the
CONFIG_SYSCTL=n) becomes an empty do { } while (0) stub, these buffers
cause gcc to produce appropriate warnings.

Wrap these buffers with RPC_IFDEBUG macro, as Trond proposed, to
compile them out when not needed.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

This patch converts USB_EHCI_FSL config option into the verbose
bool, so we'll able to select it for other freescale processors
with built-in EHCI controller.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Currently, this setup:
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_HCD_PPC_OF=y

Will fail to build:
  CC      drivers/usb/host/ehci-hcd.o
drivers/usb/host/ehci-hcd.c:1018:2: error: #error "missing bus glue for ehci-hcd"
make[3]: *** [drivers/usb/host/ehci-hcd.o] Error 1

ehci-hcd.c actually contains OF_PLATFORM_DRIVER glue, so error is bogus.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch (as1035) fixes a bug in usb_stor_access_xfer_buf() (the bug
was originally found by Boaz Harrosh): The routine must not attempt to
write beyond the end of a scatter-gather list or beyond the number of
bytes requested.  It also fixes up the formatting of a few comments
and similar whitespace issues.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch (as1033) adds a quirks entry and an unusual_devs entry for
the Actions Semiconductor flash drive.  This device has a 64-byte
string descriptor, which it doesn't terminate with a 0-length packet.

Oddly enough, the reporter's logs show that when the device was
plugged in at boot time, it changes its behavior completely -- it uses
a different product ID, product string descriptor, and bDeviceClass.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch (as1034) was written by Leonid Petrov, reported by Robert
Spitzenpfeil, and updated by me.  It adds an unusual_devs entry with
the IGNORE_RESIDUE flag for the Oracom MP3 player.  Together with the
change to the Get-Max-LUN routine in as1032, it makes the player usable.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Move the Onda H600/ZTE MF33 device from the sierra driver to the option
driver.

The reason it was moved is because the sierra driver is starting to support
more and more sierra proprietary features, so it makes more sense to keep
sierra only devices in there.
Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

I have a new ldusb device to go into the device table. Jiri has merged
the change for hiddev quirks already.


From: Stephen Ware <stephen.ware@eqware.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

commit 0cf4f2de introduced a bug, which
prevents sending an USB_CDC_GET_ENCAPSULATED_RESPONSE message. This
breaks the RNDIS initialization (especially / only Windoze machines
dislike this behavior...).
Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: Jan Altenberg <jan.altenberg@linutronix.de>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Warren Turkal <turkal@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Add new BCD numbers for Nikon D80 Firmware revision v1.10 to the
unusual_devs.h file.
Signed-off-by: Konstantin Kletschke <konsti@ku-gbr.de>
Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch (as1032) removes the Clear-Halt calls in
usb_stor_Bulk_max_lun().  Evidently some devices (such as the Oracom
MP3 player) really don't like to receive these requests when their
bulk endpoints aren't halted.

The only reason for adding them originally was to get an ancient
ZIP-100 drive to work.  But since this device has only a single LUN,
we don't need to send it a Get-Max-LUN request at all.  Adding an
unusual_devs entry for the ZIP-100 with the SINGLE_LUN flag set will
cause this step to be skipped.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

this is a small patch to add support for a rebranded Novatel modem (see
http://ubuntuforums.org/archive/index.php/t-608388.html for details).
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>