- 08 Sep, 2013 34 commits
-
-
Julien Grall authored
commit 0d7febe5 upstream. When CONFIG_PREEMPT is enabled, Linux will not be able to boot and warn: [ 4.127825] ------------[ cut here ]------------ [ 4.133376] WARNING: at init/main.c:699 do_one_initcall+0x150/0x158() [ 4.140738] initcall xen_init_events+0x0/0x10c returned with preemption imbalance This is because xen_percpu_init uses get_cpu but doesn't have the corresponding put_cpu. Signed-off-by:
Julien Grall <julien.grall@linaro.org> Signed-off-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by:
Jonghwan Choi <jhbird.choi@samsung.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mark Rusk authored
commit eefbc594 upstream. Using an uninitialized variable 'devnum' after 'goto out;' was causing panic. Just go ahead and return, we need to ignore AUX iLO devs. Oops: 0002 [#1] SMP . . . RIP [<ffffffffa033e270>] ilo_probe+0xec/0xe7c [hpilo] Signed-off-by:
Mark Rusk <mark.rusk@hp.com> Signed-off-by:
-
Lan Tianyu authored
commit 524f42fa upstream. The ECDT of ASUSTEK L4R doesn't provide correct command and data I/O ports. The DSDT provides the correct information instead. For this reason, add this machine to quirk list for ECDT validation and use the EC information from the DSDT. [rjw: Changelog] References: https://bugzilla.kernel.org/show_bug.cgi?id=60765Reported-and-tested-by:
Daniele Esposti <expo@expobrain.net> Signed-off-by:
Lan Tianyu <tianyu.lan@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Wei Hu authored
commit 30b146d1 upstream. The temperature reporting interface stays the same, so we just add the PCI-ID to the list. Verified on AMD Olive Hill. Signed-off-by:
Wei Hu <wei@aristanetworks.com> Acked-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Graham Williams authored
commit d2572218 upstream. The gadget strings table should be null terminated. usb_gadget_get_string() loops through the table expecting a null at the end of the list. Signed-off-by:
Graham Williams <gwilli@broadcom.com> Signed-off-by:
-
Tomas Winkler authored
commit ff96066e upstream. Both H_IS and H_IE needs to be set to receive H_RDY interrupt 1. Assert H_IS to clear the interrupts during hw reset and use mei_me_reg_write instead of mei_hcsr_set as the later strips down the H_IS 2. fix interrupt disablement embarrassing typo hcsr |= ~H_IE -> hcsr &= ~H_IE; this will remove the unwanted interrupt on power down 3. remove useless debug print outs Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Cc: Shuah Khan <shuah.kh@samsung.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by:
-
Nicholas Bellinger authored
commit 28aaa950 upstream. This patch addresses a potential NULL pointer dereference regression in iscsit_setup_nop_out() code, specifically for two cases when a solicited NOPOUT triggers a ISCSI_REASON_PROTOCOL_ERROR reject to be generated. This is because iscsi_cmd is expected to be NULL for solicited NOPOUT case before iscsit_process_nop_out() locates the descriptor via TTT using iscsit_find_cmd_from_ttt(). This regression was originally introduced in: commit ba159914 Author: Nicholas Bellinger <nab@linux-iscsi.org> Date: Wed Jul 3 03:48:24 2013 -0700 iscsi-target: Fix iscsit_add_reject* usage for iser Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Nicholas Bellinger authored
commit c9a03c12 upstream. This patch fixes a bug in __iscsi_target_login_thread() where an explicit network portal thread reset ends up leaking the iscsit_transport module reference, along with the associated iscsi_conn allocation. This manifests itself with iser-target where a NP reset causes the extra iscsit_transport reference to be taken in iscsit_conn_set_transport() during the reset, which prevents the ib_isert module from being unloaded after the NP thread shutdown has finished. Signed-off-by:
-
Nicholas Bellinger authored
commit 9d86a2be upstream. This patch addresses a regression bug within ImmediateData=Yes failure handling that ends up triggering an OOPs within >= v3.10 iscsi-target code. The problem occurs when iscsit_process_scsi_cmd() does the call to target_put_sess_cmd(), and once again in iscsit_get_immediate_data() that is triggered during two different cases: - When iscsit_sequence_cmd() returns CMDSN_LOWER_THAN_EXP, for which the descriptor state will already have been set to ISTATE_REMOVE by iscsit_sequence_cmd(), and - When iscsi_cmd->sense_reason is set, for which iscsit_execute_cmd() will have already called transport_send_check_condition_and_sense() to queue the exception response. It changes iscsit_process_scsi_cmd() to drop the early call, and makes iscsit_get_immediate_data() call target_put_sess_cmd() from a single location after dumping the immediate data for the failed command. The regression was initially introduced in commit: commit 561bf158 Author: Nicholas Bellinger <nab@linux-iscsi.org> Date: Wed Jul 3 03:58:58 2013 -0700 iscsi-target: Fix iscsit_sequence_cmd reject handling for iser Signed-off-by:
-
Nicholas Bellinger authored
commit ee60bddb upstream. This patch fixes spc_emulate_inquiry_std() to add trailing ASCII spaces for INQUIRY vendor + model fields following SPC-4 text: "ASCII data fields described as being left-aligned shall have any unused bytes at the end of the field (i.e., highest offset) and the unused bytes shall be filled with ASCII space characters (20h)." This addresses a problem with Falconstor NSS multipathing. Reported-by:
Tomas Molota <tomas.molota@lightstorm.sk> Signed-off-by:
-
Stanislaw Gruszka authored
commit b2fcc0ae upstream. My current 3.11 fix: commit 788f7a56 Author: Stanislaw Gruszka <sgruszka@redhat.com> Date: Thu Aug 1 12:07:55 2013 +0200 iwl4965: reset firmware after rfkill off broke rfkill notification to user-space . I missed that bug, because I compiled without CONFIG_RFKILL, sorry about that. Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Felix Fietkau authored
commit 2dfca312 upstream. brcm80211 cannot handle sending frames with CCK rates as part of an A-MPDU session. Other drivers may have issues too. Set the flag in all drivers that have been tested with CCK rates. This fixes a reported brcmsmac regression introduced in commit ef47a5e4 "mac80211/minstrel_ht: fix cck rate sampling" Reported-by:
Tom Gundersen <teg@jklm.no> Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
commit 2a3ba63c upstream. IBSS needs to release the channel context when leaving but I evidently missed that. Fix it. Signed-off-by:
-
Sujith Manoharan authored
commit 19c36160 upstream. The PLL hang workaround is required only for AR9330 and AR9340. This issue was first observed on an AP121 and the WAR is enabled for AR9340 also (DB120 etc.), since it uses a PLL design identical to AR9330. This is not required for AR9485 and AR9550. Various bugs have been reported regarding this: https://bugzilla.redhat.com/show_bug.cgi?id=997217 https://bugzilla.redhat.com/show_bug.cgi?id=994648Signed-off-by:
Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by:
-
Helmut Schaa authored
commit d2e9fc14 upstream. ath9k_htc adds padding between the 802.11 header and the payload during TX by moving the header. When handing the frame back to mac80211 for TX status handling the header is not moved back into its original position. This can result in a too small skb headroom when entering ath9k_htc again (due to a soft retransmission for example) causing an skb_under_panic oops. Fix this by moving the 802.11 header back into its original position before returning the frame to mac80211 as other drivers like rt2x00 or ath5k do. Reported-by:
Marc Kleine-Budde <mkl@blackshift.org> Signed-off-by:
Helmut Schaa <helmut.schaa@googlemail.com> Tested-by:
-
Yinghai Lu authored
commit 527bf129 upstream. Dave Hansen reported that systems between 500G and 600G RAM crash early if DEBUG_PAGEALLOC is selected. > [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] > [ 0.000000] [mem 0x00000000-0x000fffff] page 4k > [ 0.000000] BRK [0x02086000, 0x02086fff] PGTABLE > [ 0.000000] BRK [0x02087000, 0x02087fff] PGTABLE > [ 0.000000] BRK [0x02088000, 0x02088fff] PGTABLE > [ 0.000000] init_memory_mapping: [mem 0xe80ee00000-0xe80effffff] > [ 0.000000] [mem 0xe80ee00000-0xe80effffff] page 4k > [ 0.000000] BRK [0x02089000, 0x02089fff] PGTABLE > [ 0.000000] BRK [0x0208a000, 0x0208afff] PGTABLE > [ 0.000000] Kernel panic - not syncing: alloc_low_page: ran out of memory It turns out that we missed increasing needed pages in BRK to mapping initial 2M and [0,1M) when we switched to use the #PF handler to set memory mappings: > commit 8170e6be > Author: H. Peter Anvin <hpa@zytor.com> > Date: Thu Jan 24 12:19:52 2013 -0800 > > x86, 64bit: Use a #PF handler to materialize early mappings on demand Before that, we had the maping from [0,512M) in head_64.S, and we can spare two pages [0-1M). After that change, we can not reuse pages anymore. When we have more than 512M ram, we need an extra page for pgd page with [512G, 1024g). Increase pages in BRK for page table to solve the boot crash. Reported-by:
Dave Hansen <dave.hansen@intel.com> Bisected-by:
Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1376351004-4015-1-git-send-email-yinghai@kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Trond Myklebust authored
commit 347e2233 upstream. Some architectures, such as ARM-32 do not return the same base address when you call kmap_atomic() twice on the same page. This causes problems for the memmove() call in the XDR helper routine "_shift_data_right_pages()", since it defeats the detection of overlapping memory ranges, and has been seen to corrupt memory. The fix is to distinguish between the case where we're doing an inter-page copy or not. In the former case of we know that the memory ranges cannot possibly overlap, so we can additionally micro-optimise by replacing memmove() with memcpy(). Reported-by:
Mark Young <MYoung@nvidia.com> Reported-by:
Matt Craighead <mcraighead@nvidia.com> Cc: Bruce Fields <bfields@fieldses.org> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Tested-by:
-
Imre Deak authored
commit 77fa4cbd upstream. Fix the typo introduced in commit 1a2eb460 Author: Keith Packard <keithp@keithp.com> Date: Wed Nov 16 16:26:07 2011 -0800 drm/i915: Hook up Ivybridge eDP This fixes eDP link-training failures and cases where all voltage swing /pre-emphasis levels were tried and failed during clock recovery and - as a fallback - we go on to do channel equalization with the last voltage swing/pre-emphasis level which will succeed. Both issues can lead to a blank screen. v2: - improve commit message Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64880Tested-by:
Jeremy Moles <cubicool@gmail.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Jakob Bornecrantz authored
commit 6e4dcff3 upstream. This fixes the piglit test texturing/max-texture-size causing the VM to die due to a too large SVGA command. Signed-off-by:
Jakob Bornecrantz <jakob@vmware.com> Reviewed-by:
Biran Paul <brianp@vmware.com> Reviewed-by:
Zack Rusin <zackr@vmware.com> Signed-off-by:
Dave Airlie <airlied@gmail.com> Signed-off-by:
-
Tejun Heo authored
commit b22ce278 upstream. If !PREEMPT, a kworker running work items back to back can hog CPU. This becomes dangerous when a self-requeueing work item which is waiting for something to happen races against stop_machine. Such self-requeueing work item would requeue itself indefinitely hogging the kworker and CPU it's running on while stop_machine would wait for that CPU to enter stop_machine while preventing anything else from happening on all other CPUs. The two would deadlock. Jamie Liu reports that this deadlock scenario exists around scsi_requeue_run_queue() and libata port multiplier support, where one port may exclude command processing from other ports. With the right timing, scsi_requeue_run_queue() can end up requeueing itself trying to execute an IO which is asked to be retried while another device has an exclusive access, which in turn can't make forward progress due to stop_machine. Fix it by invoking cond_resched() after executing each work item. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Jamie Liu <jamieliu@google.com> References: http://thread.gmane.org/gmane.linux.kernel/1552567Signed-off-by:
-
Andrey Vagin authored
commit 6f6b8951 upstream. If the system had a few memory groups and all of them were destroyed, memcg_limited_groups_array_size has non-zero value, but all new caches are created without memcg_params, because memcg_kmem_enabled() returns false. We try to enumirate child caches in a few places and all of them are potentially dangerous. For example my kernel is compiled with CONFIG_SLAB and it crashed when I tryed to mount a NFS share after a few experiments with kmemcg. BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffff8118166a>] do_tune_cpucache+0x8a/0xd0 PGD b942a067 PUD b999f067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: fscache(+) ip6table_filter ip6_tables iptable_filter ip_tables i2c_piix4 pcspkr virtio_net virtio_balloon i2c_core floppy CPU: 0 PID: 357 Comm: modprobe Not tainted 3.11.0-rc7+ #59 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff8800b9f98240 ti: ffff8800ba32e000 task.ti: ffff8800ba32e000 RIP: 0010:[<ffffffff8118166a>] [<ffffffff8118166a>] do_tune_cpucache+0x8a/0xd0 RSP: 0018:ffff8800ba32fb70 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000006 RDX: 0000000000000000 RSI: ffff8800b9f98910 RDI: 0000000000000246 RBP: ffff8800ba32fba0 R08: 0000000000000002 R09: 0000000000000004 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000010 R13: 0000000000000008 R14: 00000000000000d0 R15: ffff8800375d0200 FS: 00007f55f1378740(0000) GS:ffff8800bfa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f24feba57a0 CR3: 0000000037b51000 CR4: 00000000000006f0 Call Trace: enable_cpucache+0x49/0x100 setup_cpu_cache+0x215/0x280 __kmem_cache_create+0x2fa/0x450 kmem_cache_create_memcg+0x214/0x350 kmem_cache_create+0x2b/0x30 fscache_init+0x19b/0x230 [fscache] do_one_initcall+0xfa/0x1b0 load_module+0x1c41/0x26d0 SyS_finit_module+0x86/0xb0 system_call_fastpath+0x16/0x1b Signed-off-by:
Andrey Vagin <avagin@openvz.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Christoph Lameter <cl@linux.com> Cc: Glauber Costa <glommer@openvz.org> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Russ Anderson authored
commit 21ea9f5a upstream. "cat /sys/devices/system/memory/memory*/removable" crashed the system. The problem is that show_mem_removable() is passing a bad pfn to is_mem_section_removable(), which causes if (!node_online(page_to_nid(page))) to blow up. Why is it passing in a bad pfn? The reason is that show_mem_removable() will loop sections_per_block times. sections_per_block is 16, but mem->section_count is 8, indicating holes in this memory block. Checking that the memory section is present before checking to see if the memory section is removable fixes the problem. harp5-sys:~ # cat /sys/devices/system/memory/memory*/removable 0 1 1 1 1 1 1 1 1 1 1 1 1 1 BUG: unable to handle kernel paging request at ffffea00c3200000 IP: [<ffffffff81117ed1>] is_pageblock_removable_nolock+0x1/0x90 PGD 83ffd4067 PUD 37bdfce067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: autofs4 binfmt_misc rdma_ucm rdma_cm iw_cm ib_addr ib_srp scsi_transport_srp scsi_tgt ib_ipoib ib_cm ib_uverbs ib_umad iw_cxgb3 cxgb3 mdio mlx4_en mlx4_ib ib_sa mlx4_core ib_mthca ib_mad ib_core fuse nls_iso8859_1 nls_cp437 vfat fat joydev loop hid_generic usbhid hid hwperf(O) numatools(O) dm_mod iTCO_wdt ipv6 iTCO_vendor_support igb i2c_i801 ioatdma i2c_algo_bit ehci_pci pcspkr lpc_ich i2c_core ehci_hcd ptp sg mfd_core dca rtc_cmos pps_core mperf button xhci_hcd sd_mod crc_t10dif usbcore usb_common scsi_dh_emc scsi_dh_hp_sw scsi_dh_alua scsi_dh_rdac scsi_dh gru(O) xvma(O) xfs crc32c libcrc32c thermal sata_nv processor piix mptsas mptscsih scsi_transport_sas mptbase megaraid_sas fan thermal_sys hwmon ext3 jbd ata_piix ahci libahci libata scsi_mod CPU: 4 PID: 5991 Comm: cat Tainted: G O 3.11.0-rc5-rja-uv+ #10 Hardware name: SGI UV2000/ROMLEY, BIOS SGI UV 2000/3000 series BIOS 01/15/2013 task: ffff88081f034580 ti: ffff880820022000 task.ti: ffff880820022000 RIP: 0010:[<ffffffff81117ed1>] [<ffffffff81117ed1>] is_pageblock_removable_nolock+0x1/0x90 RSP: 0018:ffff880820023df8 EFLAGS: 00010287 RAX: 0000000000040000 RBX: ffffea00c3200000 RCX: 0000000000000004 RDX: ffffea00c30b0000 RSI: 00000000001c0000 RDI: ffffea00c3200000 RBP: ffff880820023e38 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000001 R12: ffffea00c33c0000 R13: 0000160000000000 R14: 6db6db6db6db6db7 R15: 0000000000000001 FS: 00007ffff7fb2700(0000) GS:ffff88083fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffea00c3200000 CR3: 000000081b954000 CR4: 00000000000407e0 Call Trace: show_mem_removable+0x41/0x70 dev_attr_show+0x2a/0x60 sysfs_read_file+0xf7/0x1c0 vfs_read+0xc8/0x130 SyS_read+0x5d/0xa0 system_call_fastpath+0x16/0x1b Signed-off-by:
Russ Anderson <rja@sgi.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Reviewed-by:
Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by:
-
Svenning Soerensen authored
commit 368ae537 upstream. According to 'man msgrcv': "If msgtyp is less than 0, the first message of the lowest type that is less than or equal to the absolute value of msgtyp shall be received." Bug: The kernel only returns a message if its type is 1; other messages with type < abs(msgtype) will never get returned. Fix: After having traversed the list to find the first message with the lowest type, we need to actually return that message. This regression was introduced by commit daaf74cf ("ipc: refactor msg list search into separate function") Signed-off-by:
Svenning Soerensen <sss@secomea.dk> Reviewed-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
-
Nathan Zimmer authored
commit 84a78a65 upstream. Correct an issue with /proc/timer_list reported by Holger. When reading from the proc file with a sufficiently small buffer, 2k so not really that small, there was one could get hung trying to read the file a chunk at a time. The timer_list_start function failed to account for the possibility that the offset was adjusted outside the timer_list_next. Signed-off-by:
Nathan Zimmer <nzimmer@sgi.com> Reported-by:
Holger Hans Peter Freyther <holger@freyther.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Berke Durak <berke.durak@xiphos.com> Cc: Jeff Layton <jlayton@redhat.com> Tested-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Kevin Hilman authored
commit 3f0fa9a8 upstream. The use of WARN_ON() needs the definitions from bug.h, without it you can get: include/linux/regmap.h: In function 'regmap_write': include/linux/regmap.h:525:2: error: implicit declaration of function 'WARN_ONCE' [-Werror=implicit-function-declaration] Signed-off-by:
Kevin Hilman <khilman@linaro.org> Signed-off-by:
Mark Brown <broonie@linaro.org> Signed-off-by:
-
Hans Verkuil authored
commit 9504a923 upstream. The IO command size is 128 bytes for these new controllers as opposed to 64 for the old 8001 controller. The Adaptec out-of-tree driver did this correctly. After comparing the two this turned out to be the crucial difference. So don't hardcode the IO command size, instead use pm8001_ha->iomb_size as that is the correct value for both old and new controllers. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Anand Kumar Santhanam <AnandKumar.Santhanam@pmcs.com> Acked-by:
Jack Wang <xjtuwjp@gmail.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Eugene Surovegin authored
commit d220980b upstream. This solves a problem observed in kexec'ed kernel where 200ms timeout is too short and bootconsole fails to initialize. Console did eventually become workable but much later into the boot process. Observed timeout was around 260ms, but I decided to make it a little bigger for more reliability. This has been tested on Power7 machine with Petitboot as a primary bootloader and PowerNV firmware. Signed-off-by:
Eugene Surovegin <surovegin@google.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Benjamin Herrenschmidt authored
commit f5f6cbb6 upstream. /proc/powerpc/lparcfg is an ancient facility (though still actively used) which allows access to some informations relative to the partition when running underneath a PAPR compliant hypervisor. It makes no sense on non-pseries machines. However, currently, not only can it be created on these if the kernel has pseries support, but accessing it on such a machine will crash due to trying to do hypervisor calls. In fact, it should also not do HV calls on older pseries that didn't have an hypervisor either. Finally, it has the plumbing to be a module but is a "bool" Kconfig option. This fixes the whole lot by turning it into a machine_device_initcall that is only created on pseries, and adding the necessary hypervisor check before calling the H_GET_EM_PARMS hypercall Signed-off-by:
-
Paul Mackerras authored
commit bdbc29c1 upstream. On 64-bit, __pa(&static_var) gets miscompiled by recent versions of gcc as something like: addis 3,2,.LANCHOR1+4611686018427387904@toc@ha addi 3,3,.LANCHOR1+4611686018427387904@toc@l This ends up effectively ignoring the offset, since its bottom 32 bits are zero, and means that the result of __pa() still has 0xC in the top nibble. This happens with gcc 4.8.1, at least. To work around this, for 64-bit we make __pa() use an AND operator, and for symmetry, we make __va() use an OR operator. Using an AND operator rather than a subtraction ends up with slightly shorter code since it can be done with a single clrldi instruction, whereas it takes three instructions to form the constant (-PAGE_OFFSET) and add it on. (Note that MEMORY_START is always 0 on 64-bit.) Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Takashi Iwai authored
commit fb615499 upstream. The recent commit to delay the release of kobject triggered NULL dereferences of opti9xx drivers. The cause is that all snd-opti92x-ad1848, snd-opti92x-cs4231 and snd-opti93x drivers register the PnP card driver with the very same name, and also snd-opti92x-ad1848 and -cs4231 drivers register the ISA driver with the same name, too. When these drivers are built in, quick "register-release-and-re-register" actions occur, and this results in Oops because of the same name is assigned to the kobject. The fix is simply to assign individual names. As a bonus, by using KBUILD_MODNAME, the patch reduces more lines than it adds. The fix is based on the suggestion by Russell King. Reported-and-tested-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit d3d3835c upstream. Yet another entry, just use the existing fixup for this machine, too. Reported-by:
"Nathanael D. Noblet" <nathanael@gnat.ca> Signed-off-by:
-
Takashi Iwai authored
commit 2ca320e2 upstream. Without the dynamic minor assignment, HDMI codec may have less PCM instances than the number of pins, which eventually leads to Oops. Reported-by:
Stratos Karafotis <stratosk@semaphore.gr> Signed-off-by:
-
Dave Kleikamp authored
commit 44512449 upstream. NFSv4 reserves readdir cookie values 0-2 for special entries (. and ..), but jfs allows a value of 2 for a non-special entry. This incompatibility can result in the nfs client reporting a readdir loop. This patch doesn't change the value stored internally, but adds one to the value exposed to the iterate method. Signed-off-by:
Dave Kleikamp <dave.kleikamp@oracle.com> [bwh: Backported to 3.2: - Adjust context - s/ctx->pos/filp->f_pos/] Tested-by:
Christian Kujau <lists@nerdbynature.de> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Ben Skeggs authored
commit 6ff8c76a upstream. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
- 29 Aug, 2013 6 commits
-
-
Greg Kroah-Hartman authored
-
Kent Overstreet authored
commit e49c7c37 upstream. Journal writes need to be marked FUA, not just REQ_FLUSH. And btree node writes have... weird ordering requirements. Signed-off-by:
Kent Overstreet <koverstreet@google.com> Signed-off-by:
-
Kumar Amit Mehta authored
commit 5c694129 upstream. bio_alloc_bioset returns NULL on failure. This fix adds a missing check for potential NULL pointer dereferencing. Signed-off-by:
Kumar Amit Mehta <gmate.amit@gmail.com> Signed-off-by:
-
Tomas Winkler authored
commit dab9bf41 upstream. 1. MEI_INTEROP_TIMEOUT is in seconds not in jiffies so we use mei_secs_to_jiffies macro While cold boot is fast this is relevant in resume 2. wait_event_interruptible_timeout can return with -ERESTARTSYS so do not override it with -ETIMEDOUT 3.Adjust error message Tested-by:
Shuah Khan <shuah.kh@samsung.com> Signed-off-by:
-
Tomas Winkler authored
commit 99f22c4e upstream. When powering up, we don't have to clean up the device state nothing is connected. Tested-by:
-
Tomas Winkler authored
commit 315a383a upstream. ME HW ready bit is down after hw reset was asserted or on error. Only on error we need to enter the reset flow, additional reset need to be prevented when reset was triggered during initialization , power up/down or a reset is already in progress Tested-by:
-
