[ Upstream commit df8e249b ]

Set the Rx flow classification enable flag only if key config
operation is successful.

Fixes 3f9b5c9 ("dpaa2-eth: Configure Rx flow classification key")
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d41ce98a ]

With randconfig build testing on arm64, we can run into a configuration
that has CONFIG_OMAP_CONTROL_PHY=m and CONFIG_OMAP_USB2=y, which in turn
causes a link failure:

drivers/phy/ti/phy-omap-usb2.o: In function `omap_usb_phy_power':
phy-omap-usb2.c:(.text+0x17c): undefined reference to `omap_control_phy_power'

I could not come up with a good way to correctly describe the relation
of the two symbols, but if we just select CONFIG_OMAP_CONTROL_PHY
during compile testing, we can no longer run into the broken configuration.

Fixes: 6777cee3 ("phy: ti: usb2: Add support for AM654 USB2 PHY")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 208d3423 ]

gcc points out that when CONFIG_GPIOLIB is disabled,
gpiod_get_array_value_cansleep() returns 0 but fails to set its output:

drivers/phy/motorola/phy-mapphone-mdm6600.c: In function 'phy_mdm6600_status':
drivers/phy/motorola/phy-mapphone-mdm6600.c:220:24: error: 'values[0]' is used uninitialized in this function [-Werror=uninitialized]

This could be fixed more generally in gpiolib by returning a failure
code, but for this specific case, the easier workaround is to add a
gpiolib dependency.

Fixes: 5d1ebbda ("phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e6f32efb ]

On platforms where the MUSB and HCI controllers share PHY0, PHY passby
is required when using the HCI controller with the PHY, but it must be
disabled when the MUSB controller is used instead.

Without this, PHY0 passby is always enabled, which results in broken
peripheral mode on such platforms (e.g. H3/H5).

Fixes: ba4bdc9e ("PHY: sunxi: Add driver for sunxi usb phy")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 95cee0b4 ]

Add a required reset to the SDM845 UFS phy to express the PHY reset
bit inside the UFS controller register space. Before this change, this
reset was not expressed in the DT, and the driver utilized two different
callbacks (phy_init and phy_poweron) to implement a two-phase
initialization procedure that involved deasserting this reset between
init and poweron. This abused the two callbacks and diluted their
purpose.

That scheme does not work as regulators cannot be turned off in
phy_poweroff because they were turned on in init, rather than poweron.
The net result is that regulators are left on in suspend that shouldn't
be.

This new scheme gives the UFS reset to the PHY, so that it can fully
initialize itself in a single callback. We can then turn regulators on
during poweron and off during poweroff.
Signed-off-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 1262cc88 ]

During boot, I get this kernel warning:

WARNING: CPU: 0 PID: 19001 at kernel/dma/debug.c:1301 debug_dma_map_sg+0x284/0x3dc
etnaviv etnaviv: DMA-API: mapping sg segment longer than device claims to support [len=3145728] [max=65536]
Modules linked in: ip6t_REJECT nf_reject_ipv6 ip6t_rpfilter xt_tcpudp ipt_REJECT nf_reject_ipv4 xt_conntrack ip_set nfnetlink ebtable_broute ebtable_nat ip6table_raw ip6table_nat nf_nat_ipv6 ip6table_mangle iptable_raw iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv4 nf_defrag_ipv6 libcrc32c iptable_mangle ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter caam_jr error snd_soc_imx_spdif imx_thermal snd_soc_imx_audmux nvmem_imx_ocotp snd_soc_sgtl5000
caam imx_sdma virt_dma coda rc_cec v4l2_mem2mem snd_soc_fsl_ssi snd_soc_fsl_spdif imx_vdoa imx_pcm_dma videobuf2_dma_contig etnaviv dw_hdmi_cec gpu_sched dw_hdmi_ahb_audio imx6q_cpufreq nfsd sch_fq_codel ip_tables x_tables
CPU: 0 PID: 19001 Comm: Xorg Not tainted 4.20.0+ #307
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[<c0019658>] (unwind_backtrace) from [<c001489c>] (show_stack+0x10/0x14)
[<c001489c>] (show_stack) from [<c07fb420>] (dump_stack+0x9c/0xd4)
[<c07fb420>] (dump_stack) from [<c00312dc>] (__warn+0xf8/0x124)
[<c00312dc>] (__warn) from [<c00313d0>] (warn_slowpath_fmt+0x38/0x48)
[<c00313d0>] (warn_slowpath_fmt) from [<c00b14e8>] (debug_dma_map_sg+0x284/0x3dc)
[<c00b14e8>] (debug_dma_map_sg) from [<c046eb40>] (drm_gem_map_dma_buf+0xc4/0x13c)
[<c046eb40>] (drm_gem_map_dma_buf) from [<c04c3314>] (dma_buf_map_attachment+0x38/0x5c)
[<c04c3314>] (dma_buf_map_attachment) from [<c046e728>] (drm_gem_prime_import_dev+0x74/0x104)
[<c046e728>] (drm_gem_prime_import_dev) from [<c046e5bc>] (drm_gem_prime_fd_to_handle+0x84/0x17c)
[<c046e5bc>] (drm_gem_prime_fd_to_handle) from [<c046edd0>] (drm_prime_fd_to_handle_ioctl+0x38/0x4c)
[<c046edd0>] (drm_prime_fd_to_handle_ioctl) from [<c0460efc>] (drm_ioctl_kernel+0x90/0xc8)
[<c0460efc>] (drm_ioctl_kernel) from [<c0461114>] (drm_ioctl+0x1e0/0x3b0)
[<c0461114>] (drm_ioctl) from [<c01cae20>] (do_vfs_ioctl+0x90/0xa48)
[<c01cae20>] (do_vfs_ioctl) from [<c01cb80c>] (ksys_ioctl+0x34/0x60)
[<c01cb80c>] (ksys_ioctl) from [<c0009000>] (ret_fast_syscall+0x0/0x28)
Exception stack(0xd81a9fa8 to 0xd81a9ff0)
9fa0:                   b6c69c88 bec613f8 00000009 c00c642e bec613f8 b86c4600
9fc0: b6c69c88 bec613f8 c00c642e 00000036 012762e0 01276348 00000300 012d91f8
9fe0: b6989f18 bec613dc b697185c b667be5c
irq event stamp: 47905
hardirqs last  enabled at (47913): [<c0098824>] console_unlock+0x46c/0x680
hardirqs last disabled at (47922): [<c0098470>] console_unlock+0xb8/0x680
softirqs last  enabled at (47754): [<c000a484>] __do_softirq+0x344/0x540
softirqs last disabled at (47701): [<c0038700>] irq_exit+0x124/0x144
---[ end trace af477747acbcc642 ]---

The reason is the contiguous buffer exceeds the default maximum segment
size of 64K as specified by dma_get_max_seg_size() in
linux/dma-mapping.h.  Fix this by providing our own segment size, which
is set to 2GiB to cover the window found in MMUv1 GPUs.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 7dbcf2b0 ]

Commit

  37fe6a42 ("x86: Check stack overflow in detail")

added a broad check for the full exception stack area, i.e. it considers
the full exception stack area as valid.

That's wrong in two aspects:

 1) It does not check the individual areas one by one

 2) #DF, NMI and #MCE are not enabling interrupts which means that a
    regular device interrupt cannot happen in their context. In fact if a
    device interrupt hits one of those IST stacks that's a bug because some
    code path enabled interrupts while handling the exception.

Limit the check to the #DB stack and consider all other IST stacks as
'overflow' or invalid.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com>
Cc: Nicolai Stange <nstange@suse.de>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190414160143.682135110@linutronix.deSigned-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 381419fa ]

The SCSI core does not like to have devices or hosts unregistered
while error recovery is in progress.  Trying to do so can lead to
self-deadlock: Part of the removal code tries to obtain a lock already
held by the error handler.

This can cause problems for the usb-storage and uas drivers, because
their error handler routines perform a USB reset, and if the reset
fails then the USB core automatically goes on to unbind all drivers
from the device's interfaces -- all while still in the context of the
SCSI error handler.

As it turns out, practically all the scenarios leading to a USB reset
failure end up causing a device disconnect (the main error pathway in
usb_reset_and_verify_device(), at the end of the routine, calls
hub_port_logical_disconnect() before returning).  As a result, the
hub_wq thread will soon become aware of the problem and will unbind
all the device's drivers in its own context, not in the
error-handler's context.

This means that usb_reset_device() does not need to call
usb_unbind_and_rebind_marked_interfaces() in cases where
usb_reset_and_verify_device() has returned an error, because hub_wq
will take care of everything anyway.

This particular problem was observed in somewhat artificial
circumstances, by using usbfs to tell a hub to power-down a port
connected to a USB-3 mass storage device using the UAS protocol.  With
the port turned off, the currently executing command timed out and the
error handler started running.  The USB reset naturally failed,
because the hub port was off, and the error handler deadlocked as
described above.  Not carrying out the call to
usb_unbind_and_rebind_marked_interfaces() fixes this issue.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Kento Kobayashi <Kento.A.Kobayashi@sony.com>
Tested-by: Kento Kobayashi <Kento.A.Kobayashi@sony.com>
CC: Bart Van Assche <bvanassche@acm.org>
CC: Martin K. Petersen <martin.petersen@oracle.com>
CC: Jacky Cao <Jacky.Cao@sony.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a4cdc9ba ]

Subsequent code relies on the values that qeth_update_from_chp_desc()
reads from the CHP descriptor. Rather than dealing with weird errors
later on, just handle it properly here.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 09f11b6c ]

switch_lock was introduced because it allowed serialization of device
authorization requests from userspace without need to take the big
domain lock (tb->lock). This was fine because device authorization with
ICM is just one command that is sent to the firmware. Now that we start
to handle all tunneling in the driver switch_lock is not enough because
we need to walk over the topology to establish paths.

For this reason drop switch_lock from the driver completely in favour of
big domain lock.

There is one complication, though. If userspace is waiting for the lock
in tb_switch_set_authorized(), it keeps the device_del() from removing
the sysfs attribute because it waits for active users to release the
attribute first which leads into following splat:

    INFO: task kworker/u8:3:73 blocked for more than 61 seconds.
          Tainted: G        W         5.1.0-rc1+ #244
    "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
    kworker/u8:3    D12976    73      2 0x80000000
    Workqueue: thunderbolt0 tb_handle_hotplug [thunderbolt]
    Call Trace:
     ? __schedule+0x2e5/0x740
     ? _raw_spin_lock_irqsave+0x12/0x40
     ? prepare_to_wait_event+0xc5/0x160
     schedule+0x2d/0x80
     __kernfs_remove.part.17+0x183/0x1f0
     ? finish_wait+0x80/0x80
     kernfs_remove_by_name_ns+0x4a/0x90
     remove_files.isra.1+0x2b/0x60
     sysfs_remove_group+0x38/0x80
     sysfs_remove_groups+0x24/0x40
     device_remove_attrs+0x3d/0x70
     device_del+0x14c/0x360
     device_unregister+0x15/0x50
     tb_switch_remove+0x9e/0x1d0 [thunderbolt]
     tb_handle_hotplug+0x119/0x5a0 [thunderbolt]
     ? process_one_work+0x1b7/0x420
     process_one_work+0x1b7/0x420
     worker_thread+0x37/0x380
     ? _raw_spin_unlock_irqrestore+0xf/0x30
     ? process_one_work+0x420/0x420
     kthread+0x118/0x130
     ? kthread_create_on_node+0x60/0x60
     ret_from_fork+0x35/0x40

We deal this by following what network stack did for some of their
attributes and use mutex_trylock() with restart_syscall(). This makes
userspace release the attribute allowing sysfs attribute removal to
progress before the write is restarted and eventually fail when the
attribute is removed.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 471ba0e6 ]

The QEMU PowerPC/PSeries machine model was not expecting a self-IPI,
and it may be a bit surprising thing to do, so have irq_work_queue_on
do local queueing when target is the current CPU.
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: =?UTF-8?q?C=C3=A9dric=20Le=20Goater?= <clg@kaod.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190409093403.20994-1-npiggin@gmail.com
[ Simplified the preprocessor comments.
  Fixed unbalanced curly brackets pointed out by Thomas. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 7603df38 ]

[    3.707412] Unable to handle kernel NULL pointer dereference at virtual address 0000009c
[    3.714511] pgd = (ptrval)
[    3.722742] [0000009c] *pgd=00000000
[    3.725238] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[    3.728968] Modules linked in:
[    3.734265] CPU: 3 PID: 112 Comm: kworker/3:2 Tainted: G        W         5.0.0-rc7-00183-g06a1c31df9eb #4
[    3.737142] Hardware name: Generic DT based system
[    3.746778] Workqueue: events deferred_probe_work_func
[    3.751542] PC is at msm_gem_map_vma+0x3c/0xac
[    3.756669] LR is at msm_gem_get_and_pin_iova+0xd8/0x134
[    3.761086] pc : [<c07d3b7c>]    lr : [<c07d14f8>]    psr: 60000013
[    3.766560] sp : ee297be8  ip : ed9ab1c0  fp : ed93b800
[    3.772546] r10: ee35e180  r9 : 00000000  r8 : ee297c80
[    3.777752] r7 : 00000000  r6 : 7c100000  r5 : 00000000  r4 : ee35e180
[    3.782968] r3 : 00000001  r2 : 00000003  r1 : ee35e180  r0 : 00000000
[    3.789562] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[    3.796079] Control: 10c5787d  Table: 2e3a806a  DAC: 00000051
[    3.803282] Process kworker/3:2 (pid: 112, stack limit = 0x(ptrval))
[    3.809006] Stack: (0xee297be8 to 0xee298000)
[    3.815445] 7be0:                   00000000 c1108c48 eda8c000 00000003 eda8c0fc c1108c48
[    3.819715] 7c00: eda8c000 00000003 eda8c0fc c07d14f8 00000001 c07d1100 7c100000 00000000
[    3.827873] 7c20: eda8c000 bb7ffb78 00000000 eda8c000 00000000 00000000 c0c8b1d4 ee3bfa00
[    3.836037] 7c40: ee3b9800 c07d1684 00000000 c1108c48 ee0d7810 ee3b9800 c0c8b1d4 c07d222c
[    3.844193] 7c60: ee3bfd84 ee297c80 00000000 c0b1d5b0 ee3bfc40 c07dcfd8 ee3bfd84 ee297c80
[    3.852357] 7c80: 0000006d ee3bfc40 ee0d7810 bb7ffb78 c0c8b1d4 00000000 ee3bfc40 c07ddb48
[    3.860516] 7ca0: 00002004 c0eba384 ee3bfc40 c079eba0 ee3bd040 ee3b9800 00000001 ed93b800
[    3.868673] 7cc0: ed9aa100 c07db7e8 ee3bf240 ed9a6500 00000001 ee3b9800 ee3bf2d4 c07a0a30
[    3.876834] 7ce0: ed93b800 7d100000 c1108c48 ee0d7610 ee3b9800 ed93b800 c1108c48 00000000
[    3.884991] 7d00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    3.893151] 7d20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bb7ffb78
[    3.901310] 7d40: c12113c4 ed93b800 ee3b9800 c1108c48 ee9eec10 00000000 ed93b800 7d100000
[    3.909472] 7d60: eff7b000 c07cf748 7d100000 00000000 c0e9a350 c0b1d5b0 c12113c4 c0961e40
[    3.917633] 7d80: c12113c4 40000113 eeff4bec c0ebe004 00000019 c0b1d230 ee9eeda8 60000113
[    3.925791] 7da0: ee35d300 ee9eeda8 c07ce260 bb7ffb78 c07ce260 ee35d2c0 00000028 00000002
[    3.933950] 7dc0: eeb76280 c118f884 ee0be640 c11c6128 c07ce260 c07ea4ac 00000000 c0962b48
[    3.942108] 7de0: c118f868 00000001 c0ebbc98 ee35d2c0 00000000 eeb76280 00000000 c118f87c
[    3.950270] 7e00: ee35d2c0 00000000 c11c63e0 c118f694 00000019 c07ea5d0 ee0d7810 00000000
[    3.958430] 7e20: c118f694 00000000 00000000 c07f2b0c c120f55c ee0d7810 c120f560 00000000
[    3.966590] 7e40: 00000000 c07f08c4 c07f0e8c ee0d7810 c11ba3d0 ee0d7810 c118f694 c07f0e8c
[    3.974748] 7e60: c1108c48 00000001 c0ebc3cc c11c63f8 c11ba3d0 c07f0c08 00000001 c07f2f8c
[    3.982908] 7e80: c118f694 00000000 ee297ed4 c07f0e8c c1108c48 00000001 c0ebc3cc c11c63f8
[    3.991068] 7ea0: c11ba3d0 c07ee8a0 c11ba3d0 ee82686c ee0baf38 bb7ffb78 ee0d7810 ee0d7810
[    3.999227] 7ec0: c1108c48 ee0d7844 c118faac c07f05b0 ee0d7810 ee0d7810 00000001 bb7ffb78
[    4.007389] 7ee0: ee0d7810 ee0d7810 c118fd18 c118faac c11c63e0 c07ef7d0 ee0d7810 c118fa90
[    4.015548] 7f00: c118fa90 c07efd68 c118fac8 ee27fe00 eefd9c80 eefdcd00 00000000 c118facc
[    4.023708] 7f20: 00000000 c033c038 eefd9c80 eefd9c80 00000008 ee27fe00 ee27fe14 eefd9c80
[    4.031866] 7f40: 00000008 c1103d00 eefd9c98 ee296000 eefd9c80 c033ce54 ee907eac c0b1d230
[    4.040026] 7f60: ee907eac eea24440 ee285000 00000000 ee296000 ee27fe00 c033ce24 eea2445c
[    4.048188] 7f80: ee907eac c0341db0 00000000 ee285000 c0341c8c 00000000 00000000 00000000
[    4.056346] 7fa0: 00000000 00000000 00000000 c03010e8 00000000 00000000 00000000 00000000
[    4.064505] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.072665] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[    4.080828] [<c07d3b7c>] (msm_gem_map_vma) from [<c07d14f8>] (msm_gem_get_and_pin_iova+0xd8/0x134)
[    4.088983] [<c07d14f8>] (msm_gem_get_and_pin_iova) from [<c07d1684>] (_msm_gem_kernel_new+0x38/0xac)
[    4.097839] [<c07d1684>] (_msm_gem_kernel_new) from [<c07d222c>] (msm_gem_kernel_new+0x24/0x2c)
[    4.107130] [<c07d222c>] (msm_gem_kernel_new) from [<c07dcfd8>] (dsi_tx_buf_alloc_6g+0x44/0x90)
[    4.115631] [<c07dcfd8>] (dsi_tx_buf_alloc_6g) from [<c07ddb48>] (msm_dsi_host_modeset_init+0x80/0x104)
[    4.124313] [<c07ddb48>] (msm_dsi_host_modeset_init) from [<c07db7e8>] (msm_dsi_modeset_init+0x34/0x1c0)
[    4.133691] [<c07db7e8>] (msm_dsi_modeset_init) from [<c07a0a30>] (mdp5_kms_init+0x764/0x7e0)
[    4.143409] [<c07a0a30>] (mdp5_kms_init) from [<c07cf748>] (msm_drm_bind+0x56c/0x740)
[    4.151824] [<c07cf748>] (msm_drm_bind) from [<c07ea4ac>] (try_to_bring_up_master+0x238/0x2b4)
[    4.159636] [<c07ea4ac>] (try_to_bring_up_master) from [<c07ea5d0>] (component_add+0xa8/0x170)
[    4.168146] [<c07ea5d0>] (component_add) from [<c07f2b0c>] (platform_drv_probe+0x48/0x9c)
[    4.176737] [<c07f2b0c>] (platform_drv_probe) from [<c07f08c4>] (really_probe+0x278/0x404)
[    4.184981] [<c07f08c4>] (really_probe) from [<c07f0c08>] (driver_probe_device+0x78/0x1c0)
[    4.193147] [<c07f0c08>] (driver_probe_device) from [<c07ee8a0>] (bus_for_each_drv+0x74/0xb8)
[    4.201389] [<c07ee8a0>] (bus_for_each_drv) from [<c07f05b0>] (__device_attach+0xd0/0x164)
[    4.209984] [<c07f05b0>] (__device_attach) from [<c07ef7d0>] (bus_probe_device+0x84/0x8c)
[    4.218143] [<c07ef7d0>] (bus_probe_device) from [<c07efd68>] (deferred_probe_work_func+0x48/0xc4)
[    4.226398] [<c07efd68>] (deferred_probe_work_func) from [<c033c038>] (process_one_work+0x204/0x574)
[    4.235254] [<c033c038>] (process_one_work) from [<c033ce54>] (worker_thread+0x30/0x560)
[    4.244534] [<c033ce54>] (worker_thread) from [<c0341db0>] (kthread+0x124/0x154)
[    4.252606] [<c0341db0>] (kthread) from [<c03010e8>] (ret_from_fork+0x14/0x2c)
[    4.259966] Exception stack(0xee297fb0 to 0xee297ff8)
[    4.266998] 7fa0:                                     00000000 00000000 00000000 00000000
[    4.272143] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.280297] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[    4.288451] Code: e5813080 1a000013 e3a03001 e5c4307c (e590009c)
[    4.294933] ---[ end trace 18729cc2bca2b4b3 ]---
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f98baa31 ]

The frame_busy mask is used in frame_done event handling, which is not
invoked for async commits. So an async commit will leave the
frame_busy mask populated after it completes and future commits will start
with the busy mask incorrect.

This showed up on disable after cursor move. I was hitting the "this should
not happen" comment in the frame event worker since frame_busy was set,
we queued the event, but there were no frames pending (since async
also doesn't set that).
Reviewed-by: Fritz Koenig <frkoenig@google.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190130163220.138637-1-sean@poorly.runSigned-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 6cd5235c ]

The call to of_get_child_by_name returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:57:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 47, but without a corresponding object release within this function.
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:66:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 47, but without a corresponding object release within this function.
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:118:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 47, but without a corresponding object release within this function.
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:57:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 51, but without a corresponding object release within this function.
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:66:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 51, but without a corresponding object release within this function.
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:118:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 51, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Mamta Shukla <mamtashukla555@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sharat Masetty <smasetty@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org (open list)
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a7fcc323 ]

release resources allocated in mode_set if any of
the hw check fails. Most of these checks are not
necessary and they will be removed in the follow up
patches with state based resource allocations.
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1550107156-17625-4-git-send-email-jsanka@codeaurora.orgSigned-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a5112277 ]

The kzalloc here was being used without checking the return - if the
kzalloc fails return VCHIQ_ERROR. The call-site of
vchiq_platform_init_state() vchiq_init_state() was not responding
to an allocation failure so checks for != VCHIQ_SUCCESS
and pass VCHIQ_ERROR up to vchiq_platform_init() which then
will fail with -EINVAL.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Reported-by: kbuild test robot <lkp@intel.com>
Acked-By: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 5b61d50a ]

Bit shift in scale_load() could overflow shares. This patch saturates
it to MAX_SHARES like following sched_group_set_shares().

Example:

 # echo 9223372036854776832 > cpu.shares
 # cat cpu.shares

Before patch: 1024
After pattch: 262144
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/155125501891.293431.3345233332801109696.stgit@buzzSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 1a010e29 ]

Example of unhandled overflows:

 # echo 18446744073709651 > cpu.rt_runtime_us
 # cat cpu.rt_runtime_us
 99

 # echo 18446744073709900 > cpu.rt_period_us
 # cat cpu.rt_period_us
 348

After this patch they will fail with -EINVAL.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/155125501739.293431.5252197504404771496.stgit@buzzSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 1a8b4540 ]

Large values could overflow u64 and pass following sanity checks.

 # echo 18446744073750000 > cpu.cfs_period_us
 # cat cpu.cfs_period_us
 40448

 # echo 18446744073750000 > cpu.cfs_quota_us
 # cat cpu.cfs_quota_us
 40448

After this patch they will fail with -EINVAL.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/155125502079.293431.3947497929372138600.stgit@buzzSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 4dcabece ]

The number of descendant cgroups and the number of dying
descendant cgroups are currently synchronized using the cgroup_mutex.

The number of descendant cgroups will be required by the cgroup v2
freezer, which will use it to determine if a cgroup is frozen
(depending on total number of descendants and number of frozen
descendants). It's not always acceptable to grab the cgroup_mutex,
especially from quite hot paths (e.g. exit()).

To avoid this, let's additionally synchronize these counters using
the css_set_lock.

So, it's safe to read these counters with either cgroup_mutex or
css_set_lock locked, and for changing both locks should be acquired.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: kernel-team@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b7d5dc21 ]

The per-CPU variable batched_entropy_uXX is protected by get_cpu_var().
This is just a preempt_disable() which ensures that the variable is only
from the local CPU. It does not protect against users on the same CPU
from another context. It is possible that a preemptible context reads
slot 0 and then an interrupt occurs and the same value is read again.

The above scenario is confirmed by lockdep if we add a spinlock:
| ================================
| WARNING: inconsistent lock state
| 5.1.0-rc3+ #42 Not tainted
| --------------------------------
| inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
| ksoftirqd/9/56 [HC0[0]:SC1[1]:HE0:SE0] takes:
| (____ptrval____) (batched_entropy_u32.lock){+.?.}, at: get_random_u32+0x3e/0xe0
| {SOFTIRQ-ON-W} state was registered at:
|   _raw_spin_lock+0x2a/0x40
|   get_random_u32+0x3e/0xe0
|   new_slab+0x15c/0x7b0
|   ___slab_alloc+0x492/0x620
|   __slab_alloc.isra.73+0x53/0xa0
|   kmem_cache_alloc_node+0xaf/0x2a0
|   copy_process.part.41+0x1e1/0x2370
|   _do_fork+0xdb/0x6d0
|   kernel_thread+0x20/0x30
|   kthreadd+0x1ba/0x220
|   ret_from_fork+0x3a/0x50
…
| other info that might help us debug this:
|  Possible unsafe locking scenario:
|
|        CPU0
|        ----
|   lock(batched_entropy_u32.lock);
|   <Interrupt>
|     lock(batched_entropy_u32.lock);
|
|  *** DEADLOCK ***
|
| stack backtrace:
| Call Trace:
…
|  kmem_cache_alloc_trace+0x20e/0x270
|  ipmi_alloc_recv_msg+0x16/0x40
…
|  __do_softirq+0xec/0x48d
|  run_ksoftirqd+0x37/0x60
|  smpboot_thread_fn+0x191/0x290
|  kthread+0xfe/0x130
|  ret_from_fork+0x3a/0x50

Add a spinlock_t to the batched_entropy data structure and acquire the
lock while accessing it. Acquire the lock with disabled interrupts
because this function may be used from interrupt context.

Remove the batched_entropy_reset_lock lock. Now that we have a lock for
the data scructure, we can access it from a remote CPU.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit fe6f1a6a ]

When the system boots with random.trust_cpu=1 it doesn't initialize the
per-NUMA CRNGs because it skips the rest of the CRNG startup code. This
means that the code from 1e7f583a ("random: make /dev/urandom scalable
for silly userspace programs") is not used when random.trust_cpu=1.

crash> dmesg | grep random:
[    0.000000] random: get_random_bytes called from start_kernel+0x94/0x530 with crng_init=0
[    0.314029] random: crng done (trusting CPU's manufacturer)
crash> print crng_node_pool
$6 = (struct crng_state **) 0x0

After adding the missing call to numa_crng_init() the per-NUMA CRNGs are
initialized again:

crash> dmesg | grep random:
[    0.000000] random: get_random_bytes called from start_kernel+0x94/0x530 with crng_init=0
[    0.314031] random: crng done (trusting CPU's manufacturer)
crash> print crng_node_pool
$1 = (struct crng_state **) 0xffff9a915f4014a0

The call to invalidate_batched_entropy() was also missing. This is
important for architectures like PPC and S390 which only have the
arch_get_random_seed_* functions.

Fixes: 39a8883a ("random: add a config option to trust the CPU's hwrng")
Signed-off-by: Jon DeVree <nuxi@vault24.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 56c46bba ]

With STRICT_KERNEL_RWX enabled anything marked __init is placed at a 16M
boundary.  This is necessary so that it can be repurposed later with
different permissions.  However, in kernels with text larger than 16M,
this pushes early_setup past 32M, incapable of being reached by the
branch instruction.

Fix this by setting the CTR and branching there instead.

Fixes: 1e0fc9d1 ("powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs")
Signed-off-by: Russell Currey <ruscur@russell.cc>
[mpe: Fix it to work on BE by using DOTSYM()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 2d4d9b30 ]

When booted with "topology_updates=no", or when "off" is written to
/proc/powerpc/topology_updates, NUMA reassignments are inhibited for
PRRN and VPHN events. However, migration and suspend unconditionally
re-enable reassignments via start_topology_update(). This is
incoherent.

Check the topology_updates_enabled flag in
start/stop_topology_update() so that callers of those APIs need not be
aware of whether reassignments are enabled. This allows the
administrative decision on reassignments to remain in force across
migrations and suspensions.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 2c88e3c7 ]

commit 2da78092 "block: Fix dev_t minor allocation lifetime"
specifically moved blk_free_devt(dev->devt) call to part_release()
to avoid reallocating device number before the device is fully
shutdown.

However, it can cause use-after-free on gendisk in get_gendisk().
We use md device as example to show the race scenes:

Process1		Worker			Process2
md_free
						blkdev_open
del_gendisk
  add delete_partition_work_fn() to wq
  						__blkdev_get
						get_gendisk
put_disk
  disk_release
    kfree(disk)
    						find part from ext_devt_idr
						get_disk_and_module(disk)
    					  	cause use after free

    			delete_partition_work_fn
			put_device(part)
    		  	part_release
		    	remove part from ext_devt_idr

Before <devt, hd_struct pointer> is removed from ext_devt_idr by
delete_partition_work_fn(), we can find the devt and then access
gendisk by hd_struct pointer. But, if we access the gendisk after
it have been freed, it can cause in use-after-freeon gendisk in
get_gendisk().

We fix this by adding a new helper blk_invalidate_devt() in
delete_partition() and del_gendisk(). It replaces hd_struct
pointer in idr with value 'NULL', and deletes the entry from
idr in part_release() as we do now.

Thanks to Jan Kara for providing the solution and more clear comments
for the code.

Fixes: 2da78092 ("block: Fix dev_t minor allocation lifetime")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit ba7ecfe4 ]

This fixes unmet direct dependencies seen when CONFIG_STM32_DFSDM_ADC
is selected:

WARNING: unmet direct dependencies detected for IIO_BUFFER_HW_CONSUMER
  Depends on [n]: IIO [=y] && IIO_BUFFER [=n]
  Selected by [y]:
  - STM32_DFSDM_ADC [=y] && IIO [=y] && (ARCH_STM32 [=y] && OF [=y] ||
    COMPILE_TEST [=n])

Fixes: e2e6771c ("IIO: ADC: add STM32 DFSDM sigma delta ADC support")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c1ced46c ]

The ctrl_check_input() function is called from pvr2_ctrl_range_check().
It's supposed to validate user supplied input and return true or false
depending on whether the input is valid or not.  The problem is that
negative shifts or shifts greater than 31 are undefined in C.  In
practice with GCC they result in shift wrapping so this function returns
true for some inputs which are not valid and this could result in a
buffer overflow:

    drivers/media/usb/pvrusb2/pvrusb2-ctrl.c:205 pvr2_ctrl_get_valname()
    warn: uncapped user index 'names[val]'

The cptr->hdw->input_allowed_mask mask is configured in pvr2_hdw_create()
and the highest valid bit is BIT(4).

Fixes: 7fb20fa3 ("V4L/DVB (7299): pvrusb2: Improve logic which handles input choice availability")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 898bc40b ]

Fix au0828_analog_stream_enable() to check if device is in the right
state first. When unbind happens while bind is in progress, usbdev
pointer could be invalid in au0828_analog_stream_enable() and a call
to usb_ifnum_to_if() will result in the null pointer dereference.

This problem is found with the new media_dev_allocator.sh test.

kernel: [  590.359623] BUG: unable to handle kernel NULL pointer dereference at 00000000000004e8
kernel: [  590.359627] #PF error: [normal kernel read fault]
kernel: [  590.359629] PGD 0 P4D 0
kernel: [  590.359632] Oops: 0000 [#1] SMP PTI
kernel: [  590.359634] CPU: 3 PID: 1458 Comm: v4l_id Not tainted 5.1.0-rc2+ #30
kernel: [  590.359636] Hardware name: Dell Inc. OptiPlex 7 90/0HY9JP, BIOS A18 09/24/2013
kernel: [  590.359641] RIP: 0010:usb_ifnum_to_if+0x6/0x60
kernel: [  590.359643] Code: 5d 41 5e 41 5f 5d c3 48 83 c4
 10 b8 fa ff ff ff 5b 41 5c 41 5d 41 5e 41 5f 5d c3 b8 fa ff ff ff c3 0f 1f 00 6
6 66 66 66 90 55 <48> 8b 97 e8 04 00 00 48 89 e5 48 85 d2 74 41 0f b6 4a 04 84 c
9 74
kernel: [  590.359645] RSP: 0018:ffffad3cc3c1fc00 EFLAGS: 00010246
kernel: [  590.359646] RAX: 0000000000000000 RBX: ffff8ded b1f3c000 RCX: 1f377e4500000000
kernel: [  590.359648] RDX: ffff8dedfa3a6b50 RSI: 00000000 00000000 RDI: 0000000000000000
kernel: [  590.359649] RBP: ffffad3cc3c1fc28 R08: 00000000 8574acc2 R09: ffff8dedfa3a6b50
kernel: [  590.359650] R10: 0000000000000001 R11: 00000000 00000000 R12: 0000000000000000
kernel: [  590.359652] R13: ffff8dedb1f3f0f0 R14: ffffffff adcf7ec0 R15: 0000000000000000
kernel: [  590.359654] FS:  00007f7917198540(0000) GS:ffff 8dee258c0000(0000) knlGS:0000000000000000
kernel: [  590.359655] CS:  0010 DS: 0000 ES: 0000 CR0: 00 00000080050033
kernel: [  590.359657] CR2: 00000000000004e8 CR3: 00000001 a388e002 CR4: 00000000000606e0
kernel: [  590.359658] Call Trace:
kernel: [  590.359664]  ? au0828_analog_stream_enable+0x2c/0x180
kernel: [  590.359666]  au0828_v4l2_open+0xa4/0x110
kernel: [  590.359670]  v4l2_open+0x8b/0x120
kernel: [  590.359674]  chrdev_open+0xa6/0x1c0
kernel: [  590.359676]  ? cdev_put.part.3+0x20/0x20
kernel: [  590.359678]  do_dentry_open+0x1f6/0x360
kernel: [  590.359681]  vfs_open+0x2f/0x40
kernel: [  590.359684]  path_openat+0x299/0xc20
kernel: [  590.359688]  do_filp_open+0x9b/0x110
kernel: [  590.359695]  ? _raw_spin_unlock+0x27/0x40
kernel: [  590.359697]  ? __alloc_fd+0xb2/0x160
kernel: [  590.359700]  do_sys_open+0x1ba/0x260
kernel: [  590.359702]  ? do_sys_open+0x1ba/0x260
kernel: [  590.359712]  __x64_sys_openat+0x20/0x30
kernel: [  590.359715]  do_syscall_64+0x5a/0x120
kernel: [  590.359718]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 33dfeb62 ]

Do not access sd_formats[] if num_of_sd_formats is zero, ie
subdev sensor didn't expose any formats.
Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 70c4cf17 ]

In audit_rule_change(), audit_data_to_entry() is firstly invoked to
translate the payload data to the kernel's rule representation. In
audit_data_to_entry(), depending on the audit field type, an audit tree may
be created in audit_make_tree(), which eventually invokes kmalloc() to
allocate the tree.  Since this tree is a temporary tree, it will be then
freed in the following execution, e.g., audit_add_rule() if the message
type is AUDIT_ADD_RULE or audit_del_rule() if the message type is
AUDIT_DEL_RULE. However, if the message type is neither AUDIT_ADD_RULE nor
AUDIT_DEL_RULE, i.e., the default case of the switch statement, this
temporary tree is not freed.

To fix this issue, only allocate the tree when the type is AUDIT_ADD_RULE
or AUDIT_DEL_RULE.
Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit bccb89cf ]

This driver returns an error if unsupported media bus pixel code is
requested by VIDIOC_SUBDEV_S_FMT.

But according to Documentation/media/uapi/v4l/vidioc-subdev-g-fmt.rst,

Drivers must not return an error solely because the requested format
doesn't match the device capabilities. They must instead modify the
format to match what the hardware can provide.

So select default format code and return success in that case.

This is detected by v4l2-compliance.

Cc: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f604f0f5 ]

If the application was streaming from both videoX and vbiX, and streaming
from videoX was stopped, then the vbi streaming also stopped.

The cause being that stop_streaming for video stopped the subdevs as well,
instead of only doing that if dev->streaming_users reached 0.

au0828_stop_vbi_streaming was also wrong since it didn't stop the subdevs
at all when dev->streaming_users reached 0.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit ccdd85d5 ]

In preparation for adding asynchronous subdevice support to the driver,
don't acquire v4l2_clk from the driver .probe() callback as that may
fail if the clock is provided by a bridge driver which may be not yet
initialized.  Move the v4l2_clk_get() to ov6650_video_probe() helper
which is going to be converted to v4l2_subdev_internal_ops.registered()
callback, executed only when the bridge driver is ready.
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit bbeefa73 ]

The error return value is not written by some firmware codecs, such as
MPEG-2 decode on CodaHx4. Clear the error return value before starting
the picture run to avoid misinterpreting unrelated values returned by
sequence initialization as error return value.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e2c114c0 ]

Even if this case shouldn't happen when controller is properly programmed,
it's still better to avoid dumping a kernel Oops for this.
As the sequence may happen only for debugging purposes, log the error and
just finish the tasklet call.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 0d2e2a82 ]

Uncore PMU drivers face an awkward cyclic dependency wherein:

 - They have to pick a valid online CPU to associate with before
   registering the PMU device, since it will get exposed to userspace
   immediately.
 - The PMU registration has to be be at least partly complete before
   hotplug events can be handled, since trying to migrate an
   uninitialised context would be bad.
 - The hotplug handler has to be ready as soon as a CPU is chosen, lest
   it go offline without the user-visible cpumask value getting updated.

The arm-cci driver has tried to solve this by using get_cpu() to pick
the current CPU and prevent it from disappearing while both
registrations are performed, but that results in taking mutexes with
preemption disabled, which makes certain configurations very unhappy:

[ 1.983337] BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:2004
[ 1.983340] in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: swapper/0
[ 1.983342] Preemption disabled at:
[ 1.983353] [<ffffff80089801f4>] cci_pmu_probe+0x1dc/0x488
[ 1.983360] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.18.20-rt8-yocto-preempt-rt #1
[ 1.983362] Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
[ 1.983364] Call trace:
[ 1.983369] dump_backtrace+0x0/0x158
[ 1.983372] show_stack+0x24/0x30
[ 1.983378] dump_stack+0x80/0xa4
[ 1.983383] ___might_sleep+0x138/0x160
[ 1.983386] __might_sleep+0x58/0x90
[ 1.983391] __rt_mutex_lock_state+0x30/0xc0
[ 1.983395] _mutex_lock+0x24/0x30
[ 1.983400] perf_pmu_register+0x2c/0x388
[ 1.983404] cci_pmu_probe+0x2bc/0x488
[ 1.983409] platform_drv_probe+0x58/0xa8

It is not feasible to resolve all the possible races outside of the perf
core itself, so address the immediate bug by following the example of
nearly every other PMU driver and not even trying to do so. Registering
the hotplug notifier first should minimise the window in which things
can go wrong, so that's about as much as we can reasonably do here. This
also revealed an additional race in assigning the global pointer too
late relative to the hotplug notifier, which gets fixed in the process.
Reported-by: Li, Meng <Meng.Li@windriver.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f4033db5 ]

This is mostly a revert of commit 55bb6a63 ("clk: rockchip: mark
noc and some special clk as critical on rk3288") except that we're
keeping "pmu_hclk_otg0" as critical still.

NOTE: turning these clocks off doesn't seem to do a whole lot in terms
of power savings (checking the power on the logic rail).  It appears
to save maybe 1-2mW.  ...but still it seems like we should turn the
clocks off if they aren't needed.

About "pmu_hclk_otg0" (the one clock from the original commit we're
still keeping critical) from an email thread:

> pmu ahb clock
>
> Function: Clock to pmu module when hibernation and/or ADP is
> enabled. Must be greater than or equal to 30 MHz.
>
> If the SOC design does not support hibernation/ADP function, only have
> hclk_otg, this clk can be switched according to the usage of otg.
> If the SOC design support hibernation/ADP, has two clocks, hclk_otg and
> pmu_hclk_otg0.
> Hclk_otg belongs to the closed part of otg logic, which can be switched
> according to the use of otg.
>
> pmu_hclk_otg0 belongs to the always on part.
>
> As for whether pmu_hclk_otg0 can be turned off when otg is not in use,
> we have not tested. IC suggest make pmu_hclk_otg0 always on.

For the rest of the clocks:

atclk: No documentation about this clock other than that it goes to
the CPU.  CPU functions fine without it on.  Maybe needed for JTAG?

jtag: Presumably this clock is only needed if you're debugging with
JTAG.  It doesn't seem like it makes sense to waste power for every
rk3288 user.  In any case to do JTAG you'd need private patches to
adjust the pinctrl the mux the JTAG out anyway.

pclk_dbg, pclk_core_niu: On veyron Chromebooks we turn these two
clocks on only during kernel panics in order to access some coresight
registers.  Since nothing in the upstream kernel does this we should
be able to leave them off safely.  Maybe also needed for JTAG?

hsicphy12m_xin12m: There is no indication of why this clock would need
to be turned on for boards that don't use HSIC.

pclk_ddrupctl[0-1], pclk_publ0[0-1]: On veyron Chromebooks we turn
these 4 clocks on only when doing DDR transitions and they are off
otherwise.  I see no reason why they'd need to be on in the upstream
kernel which doesn't support DDRFreq.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 44b9f86c ]

The call to of_find_compatible_node returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
./drivers/pinctrl/samsung/pinctrl-exynos-arm.c:76:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 66, but without a corresponding object release within this function.
./drivers/pinctrl/samsung/pinctrl-exynos-arm.c:82:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 66, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 483d70d7 ]

The call to of_get_child_by_name returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
./drivers/pinctrl/pinctrl-st.c:1188:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1175, but without a corresponding object release within this function.
./drivers/pinctrl/pinctrl-st.c:1188:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1175, but without a corresponding object release within this function.
./drivers/pinctrl/pinctrl-st.c:1199:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1175, but without a corresponding object release within this function.
./drivers/pinctrl/pinctrl-st.c:1199:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1175, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org (open list)
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 44a4455a ]

The call to of_get_child_by_name returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
./drivers/pinctrl/pinctrl-pistachio.c:1422:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1360, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>