This is the (*insn_config) function for a DIO subdevice. It should be
using the data[0] value as the "instruction" to perform on the subdevice.

Use the comedi_dio_insn_config() helper to properly handle instructions.

Also, rename the function to better describe it's use.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename this function to better describe it's use.

Use comedi_dio_update_state() to handle the boilerplate code to update
the subdevice s->state.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the subdevice s->state to hold the current state of the data register
outputs instead of carrying it in the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the register map defines to better describe the hardware.

Add defines for the control register bits that enable the irq and
change the direction of the data register. This gets rid of the
"magic" numbers.

Remove PARPORT_SIZE, it's only used when requesting the i/o region
with comedi_request_region().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The extra mask used to only update the channels configured as outputs is
not necessary in this driver. Remove it and use comedi_dio_update_state()
to handle the boilerplate code to update the subdevice s->state.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The extra mask used to only update the channels configured as outputs is
not necessary in this driver. Remove it and use comedi_dio_update_state()
to handle the boilerplate code to update the subdevice s->state.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The extra mask used to only update the channels configured as outputs is
not necessary in this driver. Remove it and use comedi_dio_update_state()
to handle the boilerplate code to update the subdevice s->state.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The extra mask used to only update the channels configured as outputs is
not necessary in this driver. Remove it and use comedi_dio_update_state()
to handle the boilerplate code to update the subdevice s->state.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The extra mask used to only update the channels configured as outputs is
not necessary in this driver. Remove it and use comedi_dio_update_state()
to handle the boilerplate code to update the subdevice s->state.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The extra mask used to only update the channels configured as outputs is
not necessary in this driver. Remove it and use comedi_dio_update_state()
to handle the boilerplate code to update the subdevice s->state.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_dio_update_state() to handle the boilerplate code to update
the subdevice s->state.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_dio_update_state() to handle the boilerplate code to update
the subdevice s->state.

Also, fix a bug where the state of the channels is returned in data[0].
The comedi core expects it to be returned in data[1].
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the subdevice 'state' variable instead of carrying the state of
the output channels in the private data.

Use comedi_dio_update_state() to handle the boilerplate code to update
the subdevice s->state.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the subdevice 'state' variable instead of carrying the state of
the output channels in the private data.

Use comedi_dio_update_state() to handle the boilerplate code to update
the subdevice s->state.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the subdevice 'state' variable instead of carrying the state of
the output channels in the private data.

Use comedi_dio_update_state() to handle the boilerplate code to update
the subdevice s->state.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the subdevice 'state' variable instead of having to calculate the
current state based on the do_mux_bits in the private data.

Use comedi_dio_update_state() to handle the boilerplate code to update
the subdevice s->state.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the subdevice 'state' variable instead of carrying the state of
the output channels in the private data.

Use comedi_dio_update_state() to handle the boilerplate code to update
the subdevice s->state.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_dio_update_state() to handle the boilerplate code to update
the subdevice s->state.

Tidy up the vmk80xx_do_insn_bits() function a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_dio_update_state() to handle the boilerplate code to update
the subdevice s->state.

Remove the DEBUG_DIO, its just added noise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_dio_update_state() to handle the boilerplate code to update
the subdevice s->state for more complex cases where the hardware is only
updated based on the 'mask' of the channels that are modified.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_dio_update_state() to handle the boilerplate code to update
the subdevice s->state for simple cases where the hardware is updated
when any channel is modified.

Also, fix a bug in the amplc_pc263 and amplc_pci263 drivers where the
current state is not returned in data[1].
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use comedi_dio_update_state() to handle the boilerplate code to update
the subdevice s->state.

These drivers always need to update the hardware in order to update
the i/o configuration regardless of if the state has changed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert this driver to use the comedi_dio_update_state() helper
function.

Tidy up the comments to reflect the new code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The (*insn_bits) functions for DIO and DO subdevices typically use
the subdevice 's->state' to hold the current state of the output
channels. The 'insn' passed to these functions, INSN_BITS, specifies
two parameters passed in the 'data'.

  data[0] = 'mask', the channels to update
  data[1] = 'bits', the new state for the channels

Introduce a helper function to handle the boilerplate used to
update the internal state.

Note that the 'mask' is filtered by the 'chanmask' of the channels
actually supported by the subdevice. This is used to protect any
non-channel related bits that are stored in the subdevice state.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The subdevice 'io_bits' is a bit mask of the i/o configuration for
digital subdevices. '0' values indicate that a channel is configured
as an input and '1' values that the channel is an output. Since the
subdevice data is kzalloc()'d, all channels default as inputs.

Modify __comedi_device_postconfig() so that 'io_bits' is correctly
initialized for Digital Output subdevices.

Remove all the unnecessary initializations of 's->io_bits' from the
drivers. Also, remove the unnecessary initialization of the 's->state'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Please don't flame me :) I'm getting my feet wet with kernel contribution.
One example I saw in a video by GKH suggested cleaning up coding style as a good first commit.
Signed-off-by: Sean Williams <unixed@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the core provided helper function instead of duplicating it as
a private function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the core provided helper function instead of duplicating it as
a private function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sorry. I thought that this would be a nice easy class to document fully.
Turns out I was very wrong - I will have to research the Linux alarm and
timer subsystem one day next week and try again.

Here is what I started out with, anyway. It's not much, but it's better
than nothing!
Signed-off-by: Cruz Julian Bishop <cruzjbishop@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

I am sorry if I have interpreted anything incorrectly here. This is my
second day really attempting to understand the Ashmem system.

I can not finish documenting this class at this stage - There is still
more that I have to learn. For now, however, it will have to do.
Signed-off-by: Cruz Julian Bishop <cruzjbishop@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

I am beginning to understand the core concepts at play here.

I am nowhere near finished with this class - However, it is better if
I commit what I have documented so far tonight - That way, if I mess
up tomorrow morning, I can just roll back to here.

Sorry if this clutters things up. In the end, once *everything* is
documented, it will make understanding the Android staging driver
easier to understand as a programmer - Hopefully for both new developers
and current ones.
Signed-off-by: Cruz Julian Bishop <cruzjbishop@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Three entries were recently added with help listed as "help", while
all previous entries were listed as "---help---" to make it more
noticeable.

This commit fixes that. Sorry that it is so trivial, but it's
been bugging me for a while.
Signed-off-by: Cruz Julian Bishop <cruzjbishop@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

checkpatch.pl complains that extern prototypes should be avoided in .h files
Signed-off-by: Bojan Prtvar <prtvar.b@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ANDROID_BINDER_IPC used the functions which need depend on MMU, so need
let it depend on MMU too, or compiling fails.

The related error:

  drivers/built-in.o: In function `binder_update_page_range':
  drivers/staging/android/binder.c:599: undefined reference to `map_vm_area'
  drivers/staging/android/binder.c:626: undefined reference to `zap_page_range'
  drivers/built-in.o: In function `binder_mmap':
  drivers/staging/android/binder.c:2744: undefined reference to `get_vm_area'
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This fixes the following sparse warnings
drivers/staging/android/binder.c:1703:5: warning: symbol 'binder_thread_write' was not declared. Should it be static?
drivers/staging/android/binder.c:2058:6: warning: symbol 'binder_stat_br' was not declared. Should it be static?
Signed-off-by: Bojan Prtvar <prtvar.b@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This fixes the following sparse error
drivers/staging/android/binder.c:1795:36: error: incompatible types in comparison expression (different address spaces)
Signed-off-by: Bojan Prtvar <prtvar.b@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull timer code update from Thomas Gleixner:
 - armada SoC clocksource overhaul with a trivial merge conflict
 - Minor improvements to various SoC clocksource drivers

* 'timers/core' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource: armada-370-xp: Add detailed clock requirements in devicetree binding
  clocksource: armada-370-xp: Get reference fixed-clock by name
  clocksource: armada-370-xp: Replace WARN_ON with BUG_ON
  clocksource: armada-370-xp: Fix device-tree binding
  clocksource: armada-370-xp: Introduce new compatibles
  clocksource: armada-370-xp: Use CLOCKSOURCE_OF_DECLARE
  clocksource: armada-370-xp: Simplify TIMER_CTRL register access
  clocksource: armada-370-xp: Use BIT()
  ARM: timer-sp: Set dynamic irq affinity
  ARM: nomadik: add dynamic irq flag to the timer
  clocksource: sh_cmt: 32-bit control register support
  clocksource: em_sti: Convert to devm_* managed helpers

Pull CIFS fixes from Steve French:
 "Two minor cifs fixes and a minor documentation cleanup for cifs.txt"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update cifs.txt and remove some outdated infos
  cifs: Avoid calling unlock_page() twice in cifs_readpage() when using fscache
  cifs: Do not take a reference to the page in cifs_readpage_worker()

Pull UBI fixes from Artem Bityutskiy:
 "Just a single fastmap fix plus a regression fix"

* tag 'upstream-3.12-rc1' of git://git.infradead.org/linux-ubi:
  UBI: Fix invalidate_fastmap()
  UBI: Fix PEB leak in wear_leveling_worker()