- 14 Nov, 2011 2 commits
-
-
Axel Lin authored
In devfreq_remove_device, calling _remove_devfreq will also free devfreq. Don't dereference devfreq->governor->no_central_polling after _remove_devfreq. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
Rafael J. Wysocki authored
The SH7372 PM domain initialization routine calls pd_power_up() that executes the domain's .resume() callback, if present, and for the A4R domain this callback attepmts to restore the INTCS state from uninitialized data. To avoid that, introduce __pd_power_up() that will only execute the domain's .resume() callback if its second argument is 'true' and make the SH7372 PM domain initialization use it with 'false' as its second argument. Redefine pd_power_up() as a wrapper around __pd_power_up(). Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Tracked-down-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Magnus Damm <damm@opensource.se>
-
- 10 Nov, 2011 1 commit
-
-
MyungJoo Ham authored
Added <linux/module.h> and <linux/stat.h> to avoid a compiler error because linux/irq.h no longer includes linux/module.h after Linux 3.2. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
- 09 Nov, 2011 7 commits
-
-
Guennadi Liakhovetski authored
Make dev_pm_qos_add_request() use WARN() in a better way and do not hardcode the function's name into the message (use __func__ instead). Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
Magnus Damm authored
Refrain from running clk_disable() on clocks that have not been enabled. A typical case when this can happen is during Suspend-to-RAM for devices that have no driver associated with them. In such case the clock may be in default ACQUIRED state. Without this patch the sh7372 Mackerel board crashes in __clk_disable() during Suspend-to-RAM with: "Trying to disable clock 0xdeadbeef with 0 usecount" This happens for the CEU device which is added during boot. The test case has no CEU driver included in the kernel configuration. Needed for v3.2-rc1. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
Magnus Damm authored
If "no_suspend_irq" is used on the sh7372 Mackerel board with v3.2-rc1 then Suspend-to-RAM fails because the serial console tries to write to the SCIF driver even though the power domain is turned off. This patch checks the state of "console_suspend_enabled" to see if A3SP should be forced enabled. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
Guennadi Liakhovetski authored
Don't skip debugging output upon earlier loop termination in pd_power_up(). Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linuxLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: drivers/media: video/a5k6aa is a module and so needs module.h mfd: fix build failures in recently added ab5500 code hwspinlock/u8500: include linux/module.h MTD: MAPS: bcm963xx-flash.c: explicitly include module.h
-
git://neil.brown.name/mdLinus Torvalds authored
* 'for-linus' of git://neil.brown.name/md: md/raid5: STRIPE_ACTIVE has lock semantics, add barriers md/raid5: abort any pending parity operations when array fails.
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdunlap/linux-docsLinus Torvalds authored
* 'docs-move' of git://git.kernel.org/pub/scm/linux/kernel/git/rdunlap/linux-docs: (45 commits) DocBook/drm: Clean up a todo-note DocBook/drm: `device aware' -> `device-aware' DocBook/drm: `(device|driver) specific' -> `(device|driver)-specific' DocBook/drm: Clean up the paragraph on framebuffer objects DocBook/drm: Use `; otherwise,' DocBook/drm: Better flow with `, and then' DocBook/drm: Refer to the domain-setting function as a device-specific ioctl DocBook/drm: Improve flow of GPU/CPU coherence sentence DocBook/drm: Use an <itemizelist> for fundamental GEM operations DocBook/drm: Insert a comma DocBook/drm: Use a <variablelist> for vblank ioctls DocBook/drm: Use an itemizedlist for what an encoder needs to provide DocBook/drm: Insert `the' for readability, and change `set' to `setting' DocBook/drm: Remove extraneous commas DocBook/drm: Use a colon DocBook/drm: Clarify `final initialization' via better formatting DocBook/drm: Remove redundancy DocBook/drm: Insert `it' for smooth reading DocBook/drm: The word `so-called'; I do not think it connotes what you think it connotes DocBook/drm: Use a singular subject for grammatical cleanliness ...
-
- 08 Nov, 2011 18 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktestLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: (21 commits) ktest: Evaluate variables entered on the command line ktest: Add variable ${PWD} ktest: Add another monitor flush before installing kernel ktest: Do not opencode reboot in grub setting ktest: Add processing of complex conditionals ktest: Fix parsing of config section lines ktest: Sort make_min_config configs by dependecies ktest: Add DEFINED keyword for IF statements ktest: Add OVERRIDE keyword to DEFAULTS section ktest: Consolidate TEST_TYPE and DEFAULT code ktest: Add INCLUDE keyword to include other config files ktest: Let IF keyword take comparisons ktest: Add IF and ELSE to config sections ktest: Do not reboot on config or build issues ktest: Add option REBOOT_SUCCESS_LINE to stop waiting after a reboot ktest: Add NO_INSTALL option to not install for a test ktest: Fail when grub menu not found ktest: Include monitor in reboot code ktest: Only need to save .config when doing mrproper ktest: Create outputdir if it does not exist ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / OPP: Use ERR_CAST instead of ERR_PTR(PTR_ERR()) PM / devfreq: fix private_data Documentation: Fix typo in freezer-subsystem.txt PM / QoS: Set cpu_dma_pm_qos->name
-
Thomas Meyer authored
Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...)) [The semantic patch that makes this change is available in scripts/coccinelle/api/err_cast.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/] Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
git://git.kernel.org/pub/scm/linux/kernel/git/ohad/hwspinlockLinus Torvalds authored
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/hwspinlock: hwspinlock/u8500: fix build error due to undefined label hwspinlock: Don't return a value in __hwspin_unlock
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Hook up process_vm_{readv,writev} syscalls.
-
Linus Torvalds authored
The Kconfig loop detection goes crazy without this. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Otherwise we get compile errors like this: ERROR: "led_classdev_unregister" [drivers/platform/x86/dell-laptop.ko] undefined! ERROR: "led_classdev_register" [drivers/platform/x86/dell-laptop.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 when the dell-laptop support is enabled without the necessary LED support being enabled. Reported-by: Alessandro Suardi <alessandro.suardi@gmail.com> Acked-by: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Paul Gortmaker authored
This file uses core functions like module_init() and module_exit() and so it explicitly needs to include the module.h header. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-
Alan Cox authored
Alek Du reported that the code erroneously applies time to jiffies conversions twice to the t1 and t2 values. In normal use on a modem link this cases no visible problem but on a slower link it will break as with HZ=1000 as is typical we are running t1/t2 ten times too fast. Alek's original patch removed the conversion from the timer setting but we in fact have to be more careful as the contents of t1/t2 are visible via the device API and we thus need to correct the constants. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Axel Lin authored
Fix below build error: CC drivers/hwspinlock/u8500_hsem.o drivers/hwspinlock/u8500_hsem.c: In function 'u8500_hsem_probe': drivers/hwspinlock/u8500_hsem.c:113: error: label 'free_state' used but not defined Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
-
Axel Lin authored
Fix below build warning: CC arch/arm/mach-omap2/hwspinlock.o In file included from arch/arm/mach-omap2/hwspinlock.c:22: include/linux/hwspinlock.h: In function '__hwspin_unlock': include/linux/hwspinlock.h:121: warning: 'return' with a value, in function returning void Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
-
Dan Williams authored
All updates that occur under STRIPE_ACTIVE should be globally visible when STRIPE_ACTIVE clears. test_and_set_bit() implies a barrier, but clear_bit() does not. This is suitable for 3.1-stable. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: NeilBrown <neilb@suse.de> Cc: stable@kernel.org
-
NeilBrown authored
When the number of failed devices exceeds the allowed number we must abort any active parity operations (checks or updates) as they are no longer meaningful, and can lead to a BUG_ON in handle_parity_checks6. This bug was introduce by commit 6c0069c0 in 2.6.29. Reported-by: Manish Katiyar <mkatiyar@gmail.com> Tested-by: Manish Katiyar <mkatiyar@gmail.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: NeilBrown <neilb@suse.de> Cc: stable@kernel.org
-
Paul Gortmaker authored
These files had implicit dependencies on modular support which now show up as build failures with the module cleanup work merged to mainline. Reported-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-
Axel Lin authored
Include module.h to fix below build error: CC drivers/hwspinlock/u8500_hsem.o drivers/hwspinlock/u8500_hsem.c:177: error: 'THIS_MODULE' undeclared here (not in a function) [...] drivers/hwspinlock/u8500_hsem.c:196: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/hwspinlock/u8500_hsem.c:196: warning: function declaration isn't a prototype make[2]: *** [drivers/hwspinlock/u8500_hsem.o] Error 1 make[1]: *** [drivers/hwspinlock] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-
Jonas Gorski authored
module.h was previously implicitly included through mtd/mtd.h. Fixes the following build failure after the module.h cleanup: CC drivers/mtd/maps/bcm963xx-flash.o drivers/mtd/maps/bcm963xx-flash.c: In function 'bcm963xx_probe': drivers/mtd/maps/bcm963xx-flash.c:208:29: error: 'THIS_MODULE' undeclared (first use in this function) [...] drivers/mtd/maps/bcm963xx-flash.c:276:1: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/mtd/maps/bcm963xx-flash.c:276:15: warning: function declaration isn't a prototype make[7]: *** [drivers/mtd/maps/bcm963xx-flash.o] Error 1 Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-
Linus Torvalds authored
.. with new name. Because nothing says "really solid kernel release" like naming it after an extinct animal that just happened to be in the news lately.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omapLinus Torvalds authored
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (31 commits) ARM: OMAP: Fix export.h or module.h includes ARM: OMAP: omap_device: Include linux/export.h ARM: OMAP2: Fix H4 matrix keyboard warning ARM: OMAP1: Remove unused omap-alsa.h ARM: OMAP1: Fix warnings about enabling 32 KiHz timer ARM: OMAP2+: timer: Remove omap_device_pm_latency ARM: OMAP2+: clock data: Remove redundant timer clkdev ARM: OMAP: Devkit8000: Remove double omap_mux_init_gpio ARM: OMAP: usb: musb: OMAP: Delete unused function MAINTAINERS: Update linux-omap git repository ARM: OMAP: change get_context_loss_count ret value to int ARM: OMAP4: hsmmc: configure SDMMC1_DR0 properly ARM: OMAP4: hsmmc: Fix Pbias configuration on regulator OFF ARM: OMAP3: hwmod: fix variant registration and remove SmartReflex from common list ARM: OMAP: I2C: Fix omap_register_i2c_bus() return value on success ARM: OMAP: dmtimer: Include linux/module.h ARM: OMAP2+: l3-noc: Include linux/module.h ARM: OMAP2+: devices: Fixes for McPDM ARM: OMAP: Fix errors and warnings when building for one board ARM: OMAP3: PM: restrict erratum i443 handling to OMAP3430 only ...
-
- 07 Nov, 2011 12 commits
-
-
Al Viro authored
Mountpoint crossing is similar to following procfs symlinks - we do not get ->d_revalidate() called for dentry we have arrived at, with unpleasant consequences for NFS4. Simple way to reproduce the problem in mainline: cat >/tmp/a.c <<'EOF' #include <unistd.h> #include <fcntl.h> #include <stdio.h> main() { struct flock fl = {.l_type = F_RDLCK, .l_whence = SEEK_SET, .l_len = 1}; if (fcntl(0, F_SETLK, &fl)) perror("setlk"); } EOF cc /tmp/a.c -o /tmp/test then on nfs4: mount --bind file1 file2 /tmp/test < file1 # ok /tmp/test < file2 # spews "setlk: No locks available"... What happens is the missing call of ->d_revalidate() after mountpoint crossing and that's where NFS4 would issue OPEN request to server. The fix is simple - treat mountpoint crossing the same way we deal with following procfs-style symlinks. I.e. set LOOKUP_JUMPED... Cc: stable@kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jonathan Corbet authored
The "private_date" field in struct devfreq_dev_status almost certainly wants to be "private_data"; since there are no in-tree users of this functionality, now seems like an easy time to make the fix. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
Rafael J. Wysocki authored
Fix a typo in Documentation/cgroups/freezer-subsystem.txt. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net>
-
Dominik Brodowski authored
Since commit 4a31a334, the name of this misc device is not initialized, which leads to a funny device named /dev/(null) being created and /proc/misc containing an entry with just a number but no name. The latter leads to complaints by cryptsetup, which caused me to investigate this matter. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf top: Fix live annotation in the --stdio interface perf top tui: Don't recalc column widths considering just the first page perf report: Add progress bar when processing time ordered events perf hists browser: Warn about lost events perf tools: Fix a typo of command name as trace-cmd perf hists: Fix recalculation of total_period when sorting entries perf header: Fix build on old systems perf ui browser: Handle K_RESIZE in dialog windows perf ui browser: No need to switch char sets that often perf hists browser: Use K_TIMER perf ui: Rename ui__warning_paranoid to ui__error_paranoid perf ui: Reimplement the popup windows using libslang perf ui: Reimplement ui__popup_menu using ui__browser perf ui: Reimplement ui_helpline using libslang perf ui: Improve handling sigwinch a bit perf ui progress: Reimplement using slang perf evlist: Fix grouping of multiple events
-
Tony Lindgren authored
-
Tony Lindgren authored
Commit 32aaeffb (Merge branch 'modsplit-Oct31_2011'...) caused some build errors. Fix these and make sure we always have export.h or module.h included for MODULE_ and EXPORT_SYMBOL users: $ grep -rl ^MODULE_ arch/arm/*omap*/*.c | xargs \ grep -L linux/module.h arch/arm/mach-omap2/dsp.c arch/arm/mach-omap2/mailbox.c arch/arm/mach-omap2/omap-iommu.c arch/arm/mach-omap2/smartreflex.c Also check we either have export.h or module.h included for the files exporting symbols: $ grep -rl EXPORT_SYMBOL arch/arm/*omap*/*.c | xargs \ grep -L linux/export.h | xargs grep -L linux/module.h Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Axel Lin authored
Include linux/export.h to fix below build warning: CC arch/arm/plat-omap/omap_device.o arch/arm/plat-omap/omap_device.c:1055: warning: data definition has no type or storage class arch/arm/plat-omap/omap_device.c:1055: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' arch/arm/plat-omap/omap_device.c:1055: warning: parameter names (without types) in function declaration Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits) forcedeth: fix a few sparse warnings (variable shadowing) forcedeth: Improve stats counters forcedeth: remove unneeded stats updates forcedeth: Acknowledge only interrupts that are being processed forcedeth: fix race when unloading module MAINTAINERS/rds: update maintainer wanrouter: Remove kernel_lock annotations usbnet: fix oops in usbnet_start_xmit ixgbe: Fix compile for kernel without CONFIG_PCI_IOV defined etherh: Add MAINTAINERS entry for etherh bonding: comparing a u8 with -1 is always false sky2: fix regression on Yukon Optima netlink: clarify attribute length check documentation netlink: validate NLA_MSECS length i825xx:xscale:8390:freescale: Fix Kconfig dependancies macvlan: receive multicast with local address tg3: Update version to 3.121 tg3: Eliminate timer race with reset_task tg3: Schedule at most one tg3_reset_task run tg3: Obtain PCI function number from device ...
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
david decotigny authored
This fixes the following sparse warnings: drivers/net/ethernet/nvidia/forcedeth.c:2113:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2102:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2155:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2102:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2227:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2215:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2271:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2215:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2986:20: warning: symbol 'addr' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2963:6: originally declared here Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mandeep Baines authored
Rx byte count was off; instead use the hardware's count. Tx packet count was counting pre-TSO packets; instead count on-the-wire packets. Report hardware dropped frame count as rx_fifo_errors. - The count of transmitted packets reported by the forcedeth driver reports pre-TSO (TCP Segmentation Offload) packet counts and not the count of the number of packets sent on the wire. This change fixes the forcedeth driver to report the correct count. Fixed the code by copying the count stored in the NIC H/W to the value reported by the driver. - Count rx_drop_frame errors as rx_fifo_errors: We see a lot of rx_drop_frame errors if we disable the rx bottom-halves for too long. Normally, rx_fifo_errors would be counted in this case. The rx_drop_frame error count is private to forcedeth and is not reported by ifconfig or sysfs. The rx_fifo_errors count is currently unused in the forcedeth driver. It is reported by ifconfig as overruns. This change reports rx_drop_frame errors as rx_fifo_errors. Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-