Currently, sctp associations latch a sockets autoclose value to an association
at association init time, subject to capping constraints from the max_autoclose
sysctl value.  This leads to an odd situation where an application may set a
socket level autoclose timeout, but sliently sctp will limit the autoclose
timeout to something less than that.

Fix this by modifying the autoclose setsockopt function to check the limit, cap
it and warn the user via syslog that the timeout is capped.  This will allow
getsockopt to return valid autoclose timeout values that reflect what subsequent
associations actually use.

While were at it, also elimintate the assoc->autoclose variable, it duplicates
whats in the timeout array, which leads to multiple sources for the same
information, that may differ (as the former isn't subject to any capping).  This
gives us the timeout information in a canonical place and saves some space in
the association structure as well.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
CC: Wang Weidong <wangweidong1@huawei.com>
CC: David Miller <davem@davemloft.net>
CC: Vlad Yasevich <vyasevich@gmail.com>
CC: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

Jon Maloy says:

====================
tipc: corrections related to tasklet job mechanism

These commits correct two bugs related to tipc' service for launching
functions for asynchronous execution in a separate tasklet.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

'handler_enabled' is a global flag indicating whether the TIPC
signal handling service is enabled or not. The lack of lock
protection for this flag incurs a risk for contention, so that
a tipc_k_signal() call might queue a signal handler to a destroyed
signal queue, with unpredictable results. To correct this, we let
the already existing 'qitem_lock' protect the flag, as it already
does with the queue itself. This way, we ensure that the flag
always is consistent across all cores.
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The 'signal handler' service in TIPC is a mechanism that makes it
possible to postpone execution of functions, by launcing them into
a job queue for execution in a separate tasklet, independent of
the launching execution thread.

When we do rmmod on the tipc module, this service is stopped after
the network service. At the same time, the stopping of the network
service may itself launch jobs for execution, with the risk that these
functions may be scheduled for execution after the data structures
meant to be accessed by the job have already been deleted. We have
seen this happen, most often resulting in an oops.

This commit ensures that the signal handler is the very first to be
stopped when TIPC is shut down, so there are no surprises during
the cleanup of the other services.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The new tg3 driver leaves REG_BASE_ADDR (PCI config offset 120)
uninitialized. From power on reset this register may have garbage in it. The
Register Base Address register defines the device local address of a
register. The data pointed to by this location is read or written using
the Register Data register (PCI config offset 128). When REG_BASE_ADDR has
garbage any read or write of Register Data Register (PCI 128) will cause the
PCI bus to lock up. The TCO watchdog will fire and bring down the system.
Signed-off-by: Nat Gurumoorthy <natg@google.com>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jason Wang and Michael S. Tsirkin are still discussing how
to properly fix this.
Signed-off-by: David S. Miller <davem@davemloft.net>

macvtap_put_user() never return a value grater than iov length, this in fact
bypasses the truncated checking in macvtap_recvmsg(). Fix this by always
returning the size of packet plus the possible vlan header to let the truncated
checking work.

Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 6680ec68
(tuntap: hardware vlan tx support) breaks the truncated packet signal by never
return a length greater than iov length in tun_put_user(). This patch fixes this
by always return the length of packet plus possible vlan header. Caller can
detect the truncated packet by comparing the return value and the size of iov
length.
Reported-by: Vlad Yasevich <vyasevich@gmail.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Otherwise causing dst memory leakage.
Have Checked all other type tunnel device transmit implementation,
no such things happens anymore.
Signed-off-by: Fan Du <fan.du@windriver.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

unix_dgram_recvmsg() will hold the readlock of the socket until recv
is complete.

In the same time, we may try to setsockopt(SO_PEEK_OFF) which will hang until
unix_dgram_recvmsg() will complete (which can take a while) without allowing
us to break out of it, triggering a hung task spew.

Instead, allow set_peek_off to fail, this way userspace will not hang.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ben Hutchings says:

====================
Several fixes for the PTP hardware support added in 3.7:
1. Fix filtering of PTP packets on the TX path to be robust against bad
header lengths.
2. Limit logging on the RX path in case of a PTP packet flood, partly
from Laurence Evans.
3. Disable PTP hardware when the interface is down so that we don't
receive RX timestamp events, from Alexandre Rames.
4. Maintain clock frequency adjustment when a time offset is applied.

Also fixes for the SFC9100 family support added in 3.12:
5. Take the RX prefix length into account when applying NET_IP_ALIGN,
from Andrew Rybchenko.
6. Work around a bug that breaks communication between the driver and
firmware, from Robert Stonehouse.

Please also queue these up for the appropriate stable branches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The sun4i-emac driver uses devm_request_irq at .ndo_open time, but relies on
the managed device mechanism to actually free it. This causes an issue whenever
someone wants to restart the interface, the interrupt still being held, and not
yet released.

Fall back to using the regular request_irq at .ndo_open time, and introduce a
free_irq during .ndo_stop.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: stable@vger.kernel.org # 3.11+
Signed-off-by: David S. Miller <davem@davemloft.net>

This changes ensures that the routing entry investigated by the suppress
function actually does point to a device struct before following that pointer,
fixing a possible kernel oops situation when verifying the interface group
associated with a routing table entry.

According to Daniel Golle, this Oops can be triggered by a user process trying
to establish an outgoing IPv6 connection while having no real IPv6 connectivity
set up (only autoassigned link-local addresses).

Fixes: 6ef94cfa ("fib_rules: add route suppression based on ifgroup")
Reported-by: Daniel Golle <daniel.golle@gmail.com>
Tested-by: Daniel Golle <daniel.golle@gmail.com>
Signed-off-by: Stefan Tomanek <stefan.tomanek@wertarbyte.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

maxattr in genl_family should be used to save the max attribute
type, but not the max command type. Drop monitor doesn't support
any attributes, so we should leave it as zero.
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds barriers at appropriate places to ensure the driver
works on Xilinx Zynq ARM-based SoC platform.
Signed-off-by: Srikanth Thokala <sthokal@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are no specific interrupts for the PONG buffer on both
transmit and receive side, same interrupt is valid for both
buffers. So, this patch removes this code.
Signed-off-by: Srikanth Thokala <sthokal@xilinx.com>
Reviewed-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Brett Ciphery reported that new ipv6 addresses failed to get installed
because the addrconf generated dsts where counted against the dst gc
limit. We don't need to count those routes like we currently don't count
administratively added routes.

Because the max_addresses check enforces a limit on unbounded address
generation first in case someone plays with router advertisments, we
are still safe here.
Reported-by: Brett Ciphery <brett.ciphery@windriver.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
The following patchset contains three Netfilter fixes for your net tree,
they are:

* fix incorrect comparison in the new netnet hash ipset type, from
  Dave Jones.

* fix splat in hashlimit due to missing removal of the content of its
  proc entry in netnamespaces, from Sergey Popovich.

* fix missing rule flushing operation by table in nf_tables. Table
  flushing was already discussed back in October but this got lost and
  no patch has hit the tree to address this issue so far, from me.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit e40526cb introduced a cached dev pointer, that gets
hooked into register_prot_hook(), __unregister_prot_hook() to
update the device used for the send path.

We need to fix this up, as otherwise this will not work with
sockets created with protocol = 0, plus with sll_protocol = 0
passed via sockaddr_ll when doing the bind.

So instead, assign the pointer directly. The compiler can inline
these helper functions automagically.

While at it, also assume the cached dev fast-path as likely(),
and document this variant of socket creation as it seems it is
not widely used (seems not even the author of TX_RING was aware
of that in his reference example [1]). Tested with reproducer
from e40526cb.

 [1] http://wiki.ipxwarzone.com/index.php5?title=Linux_packet_mmap#Example

Fixes: e40526cb ("packet: fix use after free race in send path when dev is released")
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Tested-by: Salam Noureddine <noureddine@aristanetworks.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch allows you to atomically remove all rules stored in
a table via the NFT_MSG_DELRULE command. You only need to indicate
the specific table and no chain to flush all rules stored in that
table.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

In (32263dd1 netfilter: xt_hashlimit: fix namespace destroy path)
the hashlimit_net_exit() function is always called right before
hashlimit_mt_destroy() to release netns data. If you use xt_hashlimit
with IPv4 and IPv6 together, this produces the following splat via
netconsole in the netns destroy path:

 Pid: 9499, comm: kworker/u:0 Tainted: G        WC O 3.2.0-5-netctl-amd64-core2
 Call Trace:
  [<ffffffff8104708d>] ? warn_slowpath_common+0x78/0x8c
  [<ffffffff81047139>] ? warn_slowpath_fmt+0x45/0x4a
  [<ffffffff81144a99>] ? remove_proc_entry+0xd8/0x22e
  [<ffffffff810ebbaa>] ? kfree+0x5b/0x6c
  [<ffffffffa043c501>] ? hashlimit_net_exit+0x45/0x8d [xt_hashlimit]
  [<ffffffff8128ab30>] ? ops_exit_list+0x1c/0x44
  [<ffffffff8128b28e>] ? cleanup_net+0xf1/0x180
  [<ffffffff810369fc>] ? should_resched+0x5/0x23
  [<ffffffff8105b8f9>] ? process_one_work+0x161/0x269
  [<ffffffff8105aea5>] ? cwq_activate_delayed_work+0x3c/0x48
  [<ffffffff8105c8c2>] ? worker_thread+0xc2/0x145
  [<ffffffff8105c800>] ? manage_workers.isra.25+0x15b/0x15b
  [<ffffffff8105fa01>] ? kthread+0x76/0x7e
  [<ffffffff813581f4>] ? kernel_thread_helper+0x4/0x10
  [<ffffffff8105f98b>] ? kthread_worker_fn+0x139/0x139
  [<ffffffff813581f0>] ? gs_change+0x13/0x13
 ---[ end trace d8c3cc0ad163ef79 ]---
 ------------[ cut here ]------------
 WARNING: at /usr/src/linux-3.2.52/debian/build/source_netctl/fs/proc/generic.c:849
 remove_proc_entry+0x217/0x22e()
 Hardware name:
 remove_proc_entry: removing non-empty directory 'net/ip6t_hashlimit', leaking at least 'IN-REJECT'

This is due to lack of removal net/ip6t_hashlimit/* entries in
hashlimit_proc_net_exit(), since only IPv4 entries are deleted. Fix
it by always removing the IPv4 and IPv6 entries and their parent
directories in the netns destroy path.
Signed-off-by: Sergey Popovich <popovich_sergei@mail.ru>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

There is an as-yet unexplained bug that sometimes prevents (or delays)
the driver seeing the completion event for a completed MCDI request on
the SFC9120.  The requested configuration change will have happened
but the driver assumes it to have failed, and this can result in
further failures.  We can mitigate this by polling for completion
after unsuccessfully waiting for an event.

Fixes: 8127d661 ('sfc: Add support for Solarflare SFC9100 family')
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

rx_prefix_size is 4-bytes aligned on Falcon/Siena (16 bytes), but it is equal
to 14 on EF10. So, it should be taken into account if arch requires IP header
to be 4-bytes aligned (via NET_IP_ALIGN).

Fixes: 8127d661 ('sfc: Add support for Solarflare SFC9100 family')
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

There is a single MCDI PTP operation for setting the frequency
adjustment and applying a time offset to the hardware clock.  When
applying a time offset we should not change the frequency adjustment.

These two operations can now be requested separately but this requires
a flash firmware update.  Keep using the single operation, but
remember and repeat the previous frequency adjustment.

Fixes: 7c236c43 ('sfc: Add support for IEEE-1588 PTP')
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

This disables PTP when we bring the interface down to avoid getting
unmatched RX timestamp events, and tries to re-enable it when bringing
the interface up.

[bwh: Make efx_ptp_stop() safe on Falcon. Introduce
 efx_ptp_{start,stop}_datapath() functions; we'll expand them later.]

Fixes: 7c236c43 ('sfc: Add support for IEEE-1588 PTP')
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

In case of a flood of PTP packets, the timestamp peripheral and MC
firmware on the SFN[56]322F boards may not be able to provide
timestamp events for all packets.  Don't complain too much about this.

Fixes: 7c236c43 ('sfc: Add support for IEEE-1588 PTP')
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

Limit syslog flood if a PTP packet storm occurs.

Fixes: 7c236c43 ('sfc: Add support for IEEE-1588 PTP')
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

When a packet with invalid length arrives, ensure that the packet
is freed correctly if mergeable packet buffers and big packets
(GUEST_TSO4) are both enabled.
Signed-off-by: Michael Dalton <mwdalton@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Andrew Vagin <avagin@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current code unmaps the DMA mapping created for rx skb_buff's by
using the data_size as the the mapping size. This is wrong since the
correct size to specify should match the size used to create the mapping.

This commit removes the following DMA_API_DEBUG warning:

------------[ cut here ]------------
WARNING: at lib/dma-debug.c:887 check_unmap+0x3a8/0x860()
mvneta d0070000.ethernet: DMA-API: device driver frees DMA memory with different size [device address=0x000000002eb80000] [map size=1600 bytes] [unmap size=66 bytes]
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.21-01444-ga88ae13-dirty #92
[<c0013600>] (unwind_backtrace+0x0/0xf8) from [<c0010fb8>] (show_stack+0x10/0x14)
[<c0010fb8>] (show_stack+0x10/0x14) from [<c001afa0>] (warn_slowpath_common+0x48/0x68)
[<c001afa0>] (warn_slowpath_common+0x48/0x68) from [<c001b01c>] (warn_slowpath_fmt+0x30/0x40)
[<c001b01c>] (warn_slowpath_fmt+0x30/0x40) from [<c018d0fc>] (check_unmap+0x3a8/0x860)
[<c018d0fc>] (check_unmap+0x3a8/0x860) from [<c018d734>] (debug_dma_unmap_page+0x64/0x70)
[<c018d734>] (debug_dma_unmap_page+0x64/0x70) from [<c0233f78>] (mvneta_rx+0xec/0x468)
[<c0233f78>] (mvneta_rx+0xec/0x468) from [<c023436c>] (mvneta_poll+0x78/0x16c)
[<c023436c>] (mvneta_poll+0x78/0x16c) from [<c02db468>] (net_rx_action+0x94/0x160)
[<c02db468>] (net_rx_action+0x94/0x160) from [<c0021e68>] (__do_softirq+0xe8/0x1d0)
[<c0021e68>] (__do_softirq+0xe8/0x1d0) from [<c0021ff8>] (do_softirq+0x4c/0x58)
[<c0021ff8>] (do_softirq+0x4c/0x58) from [<c0022228>] (irq_exit+0x58/0x90)
[<c0022228>] (irq_exit+0x58/0x90) from [<c000e7c8>] (handle_IRQ+0x3c/0x94)
[<c000e7c8>] (handle_IRQ+0x3c/0x94) from [<c0008548>] (armada_370_xp_handle_irq+0x4c/0xb4)
[<c0008548>] (armada_370_xp_handle_irq+0x4c/0xb4) from [<c000dc20>] (__irq_svc+0x40/0x50)
Exception stack(0xc04f1f70 to 0xc04f1fb8)
1f60:                                     c1fe46f8 00000000 00001d92 00001d92
1f80: c04f0000 c04f0000 c04f84a4 c03e081c c05220e7 00000001 c05220e7 c04f0000
1fa0: 00000000 c04f1fb8 c000eaf8 c004c048 60000113 ffffffff
[<c000dc20>] (__irq_svc+0x40/0x50) from [<c004c048>] (cpu_startup_entry+0x54/0x128)
[<c004c048>] (cpu_startup_entry+0x54/0x128) from [<c04c1a14>] (start_kernel+0x29c/0x2f0)
[<c04c1a14>] (start_kernel+0x29c/0x2f0) from [<00008074>] (0x8074)
---[ end trace d4955f6acd178110 ]---
Mapped at:
 [<c018d600>] debug_dma_map_page+0x4c/0x11c
 [<c0235d6c>] mvneta_setup_rxqs+0x398/0x598
 [<c0236084>] mvneta_open+0x40/0x17c
 [<c02dbbd4>] __dev_open+0x9c/0x100
 [<c02dbe58>] __dev_change_flags+0x7c/0x134
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

br_stp_rcv() is reached by non-rx_handler path. That means there is no
guarantee that dev is bridge port and therefore simple NULL check of
->rx_handler_data is not enough. There is need to check if dev is really
bridge port and since only rcu read lock is held here, do it by checking
->rx_handler pointer.

Note that synchronize_net() in netdev_rx_handler_unregister() ensures
this approach as valid.

Introduced originally by:
commit f350a0a8
  "bridge: use rx_handler_data pointer to store net_bridge_port pointer"

Fixed but not in the best way by:
commit b5ed54e9
  "bridge: fix RCU races with bridge port"

Reintroduced by:
commit 716ec052
  "bridge: fix NULL pointer deref of br_port_get_rcu"

Please apply to stable trees as well. Thanks.

RH bugzilla reference: https://bugzilla.redhat.com/show_bug.cgi?id=1025770Reported-by: Laine Stump <laine@redhat.com>
Debugged-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

efx_ptp_is_ptp_tx() must be robust against skbs from raw sockets that
have invalid IPv4 and UDP headers.

Add checks that:
- the transport header has been found
- there is enough space between network and transport header offset
  for an IPv4 header
- there is enough space after the transport header offset for a
  UDP header

Fixes: 7c236c43 ('sfc: Add support for IEEE-1588 PTP')
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

free_netdev calls netif_napi_del too, but it's too late, because napi
structures are placed on vi->rq. netif_napi_add() is called from
virtnet_alloc_queues.

general protection fault: 0000 [#1] SMP
Dumping ftrace buffer:
   (ftrace buffer empty)
Modules linked in: ip6table_filter ip6_tables iptable_filter ip_tables virtio_balloon pcspkr virtio_net(-) i2c_pii
CPU: 1 PID: 347 Comm: rmmod Not tainted 3.13.0-rc2+ #171
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
task: ffff8800b779c420 ti: ffff8800379e0000 task.ti: ffff8800379e0000
RIP: 0010:[<ffffffff81322e19>]  [<ffffffff81322e19>] __list_del_entry+0x29/0xd0
RSP: 0018:ffff8800379e1dd0  EFLAGS: 00010a83
RAX: 6b6b6b6b6b6b6b6b RBX: ffff8800379c2fd0 RCX: dead000000200200
RDX: 6b6b6b6b6b6b6b6b RSI: 0000000000000001 RDI: ffff8800379c2fd0
RBP: ffff8800379e1dd0 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: ffff8800379c2f90
R13: ffff880037839160 R14: 0000000000000000 R15: 00000000013352f0
FS:  00007f1400e34740(0000) GS:ffff8800bfb00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00007f464124c763 CR3: 00000000b68cf000 CR4: 00000000000006e0
Stack:
 ffff8800379e1df0 ffffffff8155beab 6b6b6b6b6b6b6b2b ffff8800378391c0
 ffff8800379e1e18 ffffffff8156499b ffff880037839be0 ffff880037839d20
 ffff88003779d3f0 ffff8800379e1e38 ffffffffa003477c ffff88003779d388
Call Trace:
 [<ffffffff8155beab>] netif_napi_del+0x1b/0x80
 [<ffffffff8156499b>] free_netdev+0x8b/0x110
 [<ffffffffa003477c>] virtnet_remove+0x7c/0x90 [virtio_net]
 [<ffffffff813ae323>] virtio_dev_remove+0x23/0x80
 [<ffffffff813f62ef>] __device_release_driver+0x7f/0xf0
 [<ffffffff813f6ca0>] driver_detach+0xc0/0xd0
 [<ffffffff813f5f28>] bus_remove_driver+0x58/0xd0
 [<ffffffff813f72ec>] driver_unregister+0x2c/0x50
 [<ffffffff813ae65e>] unregister_virtio_driver+0xe/0x10
 [<ffffffffa0036942>] virtio_net_driver_exit+0x10/0x6ce [virtio_net]
 [<ffffffff810d7cf2>] SyS_delete_module+0x172/0x220
 [<ffffffff810a732d>] ? trace_hardirqs_on+0xd/0x10
 [<ffffffff810f5d4c>] ? __audit_syscall_entry+0x9c/0xf0
 [<ffffffff81677f69>] system_call_fastpath+0x16/0x1b
Code: 00 00 55 48 8b 17 48 b9 00 01 10 00 00 00 ad de 48 8b 47 08 48 89 e5 48 39 ca 74 29 48 b9 00 02 20 00 00 00
RIP  [<ffffffff81322e19>] __list_del_entry+0x29/0xd0
 RSP <ffff8800379e1dd0>
---[ end trace d5931cd3f87c9763 ]---

Fixes: 986a4f4d (virtio_net: multiqueue support)
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

free_unused_bufs must check vi->mergeable_rx_bufs before
vi->big_packets, because we use this sequence in other places.
Otherwise we allocate buffer of one type, then free it as another
type.

general protection fault: 0000 [#1] SMP
Dumping ftrace buffer:
   (ftrace buffer empty)
Modules linked in: ip6table_filter ip6_tables iptable_filter ip_tables pcspkr virtio_balloon virtio_net(-) i2c_pii
CPU: 0 PID: 400 Comm: rmmod Not tainted 3.13.0-rc2+ #170
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
task: ffff8800b6d2a210 ti: ffff8800aed32000 task.ti: ffff8800aed32000
RIP: 0010:[<ffffffffa00345f3>]  [<ffffffffa00345f3>] free_unused_bufs+0xc3/0x190 [virtio_net]
RSP: 0018:ffff8800aed33dd8  EFLAGS: 00010202
RAX: ffff8800b1fe2c00 RBX: ffff8800b66a7240 RCX: 6b6b6b6b6b6b6b6b
RDX: 6b6b6b6b6b6b6b6b RSI: ffff8800b8419a68 RDI: ffff8800b66a1148
RBP: ffff8800aed33e00 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
R13: ffff8800b66a1148 R14: 0000000000000000 R15: 000077ff80000000
FS:  00007fc4f9c4e740(0000) GS:ffff8800bfa00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00007f63f432f000 CR3: 00000000b6538000 CR4: 00000000000006f0
Stack:
 ffff8800b66a7240 ffff8800b66a7380 ffff8800377bd3f0 0000000000000000
 00000000023302f0 ffff8800aed33e18 ffffffffa00346e2 ffff8800b66a7240
 ffff8800aed33e38 ffffffffa003474d ffff8800377bd388 ffff8800377bd390
Call Trace:
 [<ffffffffa00346e2>] remove_vq_common+0x22/0x40 [virtio_net]
 [<ffffffffa003474d>] virtnet_remove+0x4d/0x90 [virtio_net]
 [<ffffffff813ae303>] virtio_dev_remove+0x23/0x80
 [<ffffffff813f62cf>] __device_release_driver+0x7f/0xf0
 [<ffffffff813f6c80>] driver_detach+0xc0/0xd0
 [<ffffffff813f5f08>] bus_remove_driver+0x58/0xd0
 [<ffffffff813f72cc>] driver_unregister+0x2c/0x50
 [<ffffffff813ae63e>] unregister_virtio_driver+0xe/0x10
 [<ffffffffa0036852>] virtio_net_driver_exit+0x10/0x7be [virtio_net]
 [<ffffffff810d7cf2>] SyS_delete_module+0x172/0x220
 [<ffffffff810a732d>] ? trace_hardirqs_on+0xd/0x10
 [<ffffffff810f5d4c>] ? __audit_syscall_entry+0x9c/0xf0
 [<ffffffff81677f69>] system_call_fastpath+0x16/0x1b
Code: c0 74 55 0f 1f 44 00 00 80 7b 30 00 74 7a 48 8b 50 30 4c 89 e6 48 03 73 20 48 85 d2 0f 84 bb 00 00 00 66 0f
RIP  [<ffffffffa00345f3>] free_unused_bufs+0xc3/0x190 [virtio_net]
 RSP <ffff8800aed33dd8>
---[ end trace edb570ea923cce9c ]---

Fixes: 2613af0e (virtio_net: migrate mergeable rx buffers to page frag allocators)
Cc: Michael Dalton <mwdalton@google.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There's an issue when showing the value of packets_per_slave due to
using signed integer. The value may be < 0 and thus not put through
reciprocal_value() before showing. This patch makes it use unsigned
integer when showing it.

CC: Andy Gospodarek <andy@greyhouse.net>
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Veaceslav Falico <vfalico@redhat.com>
CC: David S. Miller <davem@davemloft.net>
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Acked-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

During suspend-resume and lancer error recovery we will cleanup and
re-initialize the resources through be_clear() and be_setup() respectively.
During re-initialisation in be_setup(), if be_get_config() fails, we'll again
call be_clear() which will cause a NULL pointer dereference as adapter->pmac_id is
already freed.
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Firmware update would be detected by looking at the sliport_error1/
sliport_error2 register values(0x02/0x00). If its not a FW reset the current
messaging would take place. If the error is due to FW reset, log a message to
user that "Firmware update in progress" and also do not log sliport_status and
sliport_error register values.
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We must clear local_df when passing the skb between namespaces as the
packet is not local to the new namespace any more and thus may not get
fragmented by local rules. Fred Templin noticed that other namespaces
do fragment IPv6 packets while forwarding. Instead they should have send
back a PTB.

The same problem should be present when forwarding DF-IPv4 packets
between namespaces.
Reported-by: Templin, Fred L <Fred.L.Templin@boeing.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>