- 09 Jul, 2022 11 commits
-
-
Yang Yingliang authored
bcm63xx_enetsw_driver and bcm63xx_enet_driver are only used in bcm63xx_enet.c now, change them to static. Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220707135801.1483941-1-yangyingliang@huawei.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Russell King (Oracle) authored
When we are operating in SGMII inband mode, it implies that there is a PHY connected, and the ethtool advertisement for autoneg applies to the PHY, not the SGMII link. When in 1000base-X mode, then this applies to the 802.3z link and needs to be applied to the PCS. Fix this. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1o9Ng2-005Qbe-3H@rmk-PC.armlinux.org.ukSigned-off-by:
-
Antoine Tenart authored
A description is missing for the net.core.high_order_alloc_disable option in admin-guide/sysctl/net.rst ; add it. The above sysctl option was introduced by commit ce27ec60 ("net: add high_order_alloc_disable sysctl/static key"). Thanks to Eric for running again the benchmark cited in the above commit, showing this knob is now mostly of historical importance. Signed-off-by:
Antoine Tenart <atenart@kernel.org> Reviewed-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20220707080245.180525-1-atenart@kernel.orgSigned-off-by:
-
Justin Stitt authored
When building with Clang we encounter this warning: | net/rxrpc/rxkad.c:434:33: error: format specifies type 'unsigned short' | but the argument has type 'u32' (aka 'unsigned int') [-Werror,-Wformat] | _leave(" = %d [set %hx]", ret, y); y is a u32 but the format specifier is `%hx`. Going from unsigned int to short int results in a loss of data. This is surely not intended behavior. If it is intended, the warning should be suppressed through other means. This patch should get us closer to the goal of enabling the -Wformat flag for Clang builds. Link: https://github.com/ClangBuiltLinux/linux/issues/378Signed-off-by:Justin Stitt <justinstitt@google.com> Reviewed-by:
Nathan Chancellor <nathan@kernel.org> Acked-by:
David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20220707182052.769989-1-justinstitt@google.comSigned-off-by:
-
Jakub Kicinski authored
Jakub Kicinski says: ==================== tls: pad strparser, internal header, decrypt_ctx etc. A grab bag of non-functional refactoring to make the series which will let us decrypt into a fresh skb smaller. Patches in this series are not strictly required to get the decryption into a fresh skb going, they are more in the "things which had been annoying me for a while" category. ==================== Link: https://lore.kernel.org/r/20220708010314.1451462-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
tls_wait_data() sets the return code as an output parameter and always returns ctx->recv_pkt on success. Return the error code directly and let the caller read the skb from the context. Use positive return code to indicate ctx->recv_pkt is ready. While touching the definition of the function rename it. Signed-off-by: -
Jakub Kicinski authored
include/net/tls.h is getting a little long, and is probably hard for driver authors to navigate. Split out the internals into a header which will live under net/tls/. While at it move some static inlines with a single user into the source files, add a few tls_ prefixes and fix spelling of 'proccess'. Signed-off-by: -
Jakub Kicinski authored
Jump to the free() call, instead of having to remember to free the memory in multiple places. Signed-off-by: -
Jakub Kicinski authored
The max size of iv + aad + tail is 22B. That's smaller than a single sg entry (32B). Don't bother with the memory packing, just create a struct which holds the max size of those members. Signed-off-by: -
Jakub Kicinski authored
AAD size is either 5 or 13. Really no point complicating the code for the 8B of difference. This will also let us turn the chunked up buffer into a sane struct. Signed-off-by: -
Jakub Kicinski authored
sk_skb_cb lives within skb->cb[]. skb->cb[] straddles 2 cache lines, each containing 24B of data. The first cache line does not contain much interesting information for users of strparser, so pad things a little. Previously strp_msg->full_len would live in the first cache line and strp_msg->offset in the second. We need to reorder the 8 byte temp_reg with struct tls_msg to prevent a 4B hole which would push the struct over 48B. Signed-off-by:
-
- 08 Jul, 2022 14 commits
-
-
Sieng-Piaw Liew authored
napi_build_skb() reuses NAPI skbuff_head cache in order to save some cycles on freeing/allocating skbuff_heads on every new Rx or completed Tx. Use napi_consume_skb() to feed the cache with skbuff_heads of completed Tx, so it's never empty. The budget parameter is added to indicate NAPI context, as a value of zero can be passed in the case of netpoll. Signed-off-by:
Sieng-Piaw Liew <liew.s.piaw@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
TCP allocates 'fast clones' skbs for packets in tx queues. Currently, __alloc_skb() initializes the companion fclone field to SKB_FCLONE_CLONE, and leaves other fields untouched. It makes sense to defer this init much later in skb_clone(), because all fclone fields are copied and hot in cpu caches at that time. This removes one cache line miss in __alloc_skb(), cost seen on an host with 256 cpus all competing on memory accesses. Signed-off-by:
-
Hariprasad Kelam authored
Current implementation is such that driver first resets the existing PFC config before applying new pfc configuration. This creates a problem like once PF or VFs requests PFC config previous pfc config by other PFVfs is getting reset. This patch fixes the problem by removing unnecessary resetting of PFC config. Also configure Pause quanta value to smaller as current value is too high. Signed-off-by:
Hariprasad Kelam <hkelam@marvell.com> Signed-off-by:
Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by:
-
Justin Stitt authored
When building with Clang we encounter the following warnings: | net/l2tp/l2tp_debugfs.c:187:40: error: format specifies type 'unsigned | short' but the argument has type 'u32' (aka 'unsigned int') | [-Werror,-Wformat] seq_printf(m, " nr %hu, ns %hu\n", session->nr, | session->ns); - | net/l2tp/l2tp_debugfs.c:196:32: error: format specifies type 'unsigned | short' but the argument has type 'int' [-Werror,-Wformat] | session->l2specific_type, l2tp_get_l2specific_len(session)); - | net/l2tp/l2tp_debugfs.c:219:6: error: format specifies type 'unsigned | short' but the argument has type 'u32' (aka 'unsigned int') | [-Werror,-Wformat] session->nr, session->ns, Both session->nr and ->nc are of type `u32`. The currently used format specifier is `%hu` which describes a `u16`. My proposed fix is to listen to Clang and use the correct format specifier `%u`. For the warning at line 196, l2tp_get_l2specific_len() returns an int and should therefore be using the `%d` format specifier. Link: https://github.com/ClangBuiltLinux/linux/issues/378Signed-off-by:
Guillaume Nault <gnault@redhat.com> Signed-off-by:
-
Jakub Kicinski authored
The Tx NAPI should use netif_napi_add_tx(). Signed-off-by:
Wells Lu <wellslutw@gmail.com> Signed-off-by:
-
Jakub Kicinski authored
netif_napi_add_tx() does not require the weight argument. Signed-off-by:
-
Jakub Kicinski authored
Conor Dooley says: ==================== PolarFire SoC macb reset support The Cadence MACBs on PolarFire SoC (MPFS) have reset capability and are compatible with the zynqmp's init function. I have removed the zynqmp specific comments from that function & renamed it to reflect what it does, since it is no longer zynqmp only. MPFS's MACB had previously used the generic binding, so I also added the required specific binding. For v2, I noticed some low hanging cleanup fruit so there are extra patches added for that: moving the init function out of the config structs, aligning the alignment of the zynqmp & default config structs with the other dozen or so structs & simplifing the error paths to use dev_err_probe(). Feel free to apply as many or as few of those as you like. ==================== Link: https://lore.kernel.org/r/20220706095129.828253-1-conor.dooley@microchip.comSigned-off-by:
-
Conor Dooley authored
init_reset_optional() is somewhat oddly placed amidst the macb_config struct definitions. Move it to a more reasonable location alongside the fu540 init functions. Reviewed-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Signed-off-by:
-
Conor Dooley authored
The error handling paths in init_reset_optional() can all be simplified to return dev_err_probe(). Do so. Reviewed-by:
-
Conor Dooley authored
The various macb_config structs have taken different approaches to alignment when broken over newlines. Pick one style and make them match. Reviewed-by:
-
Conor Dooley authored
To date, the Microchip PolarFire SoC (MPFS) has been using the cdns,macb compatible, however the generic device does not have reset support. Add a new compatible & .data for MPFS to hook into the reset functionality added for zynqmp support (and make the zynqmp init function generic in the process). Reviewed-by:
-
Conor Dooley authored
Until now the PolarFire SoC (MPFS) has been using the generic "cdns,macb" compatible but has optional reset support. Add a specific compatible which falls back to the currently used generic binding. Acked-by:
Rob Herring <robh@kernel.org> Reviewed-by:
-
Justin Stitt authored
When building with clang we encounter this warning: | net/l2tp/l2tp_ppp.c:1557:6: error: format specifies type 'unsigned | short' but the argument has type 'u32' (aka 'unsigned int') | [-Werror,-Wformat] session->nr, session->ns, Both session->nr and session->ns are of type u32. The format specifier previously used is `%hu` which would truncate our unsigned integer from 32 to 16 bits. This doesn't seem like intended behavior, if it is then perhaps we need to consider suppressing the warning with pragma clauses. This patch should get us closer to the goal of enabling the -Wformat flag for Clang builds. Link: https://github.com/ClangBuiltLinux/linux/issues/378Signed-off-by:
-
Jie Wang authored
Currently NIC packet receiving performance based on page pool deteriorates occasionally. To analysis the causes of this problem page allocation stats are collected. Here are the stats when NIC rx performance deteriorates: bandwidth(Gbits/s) 16.8 6.91 rx_pp_alloc_fast 13794308 21141869 rx_pp_alloc_slow 108625 166481 rx_pp_alloc_slow_h 0 0 rx_pp_alloc_empty 8192 8192 rx_pp_alloc_refill 0 0 rx_pp_alloc_waive 100433 158289 rx_pp_recycle_cached 0 0 rx_pp_recycle_cache_full 0 0 rx_pp_recycle_ring 362400 420281 rx_pp_recycle_ring_full 6064893 9709724 rx_pp_recycle_released_ref 0 0 The rx_pp_alloc_waive count indicates that a large number of pages' numa node are inconsistent with the NIC device numa node. Therefore these pages can't be reused by the page pool. As a result, many new pages would be allocated by __page_pool_alloc_pages_slow which is time consuming. This causes the NIC rx performance fluctuations. The main reason of huge numa mismatch pages in page pool is that page pool uses alloc_pages_bulk_array to allocate original pages. This function is not suitable for page allocation in NUMA scenario. So this patch uses alloc_pages_bulk_array_node which has a NUMA id input parameter to ensure the NUMA consistent between NIC device and allocated pages. Repeated NIC rx performance tests are performed 40 times. NIC rx bandwidth is higher and more stable compared to the datas above. Here are three test stats, the rx_pp_alloc_waive count is zero and rx_pp_alloc_slow which indicates pages allocated from slow patch is relatively low. bandwidth(Gbits/s) 93 93.9 93.8 rx_pp_alloc_fast 60066264 61266386 60938254 rx_pp_alloc_slow 16512 16517 16539 rx_pp_alloc_slow_ho 0 0 0 rx_pp_alloc_empty 16512 16517 16539 rx_pp_alloc_refill 473841 481910 481585 rx_pp_alloc_waive 0 0 0 rx_pp_recycle_cached 0 0 0 rx_pp_recycle_cache_full 0 0 0 rx_pp_recycle_ring 29754145 30358243 30194023 rx_pp_recycle_ring_full 0 0 0 rx_pp_recycle_released_ref 0 0 0 Signed-off-by:
Jie Wang <wangjie125@huawei.com> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Link: https://lore.kernel.org/r/20220705113515.54342-1-huangguangbin2@huawei.comSigned-off-by:
-
- 07 Jul, 2022 15 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
No conflicts. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from bpf, netfilter, can, and bluetooth. Current release - regressions: - bluetooth: fix deadlock on hci_power_on_sync Previous releases - regressions: - sched: act_police: allow 'continue' action offload - eth: usbnet: fix memory leak in error case - eth: ibmvnic: properly dispose of all skbs during a failover Previous releases - always broken: - bpf: - fix insufficient bounds propagation from adjust_scalar_min_max_vals - clear page contiguity bit when unmapping pool - netfilter: nft_set_pipapo: release elements in clone from abort path - mptcp: netlink: issue MP_PRIO signals from userspace PMs - can: - rcar_canfd: fix data transmission failed on R-Car V3U - gs_usb: gs_usb_open/close(): fix memory leak Misc: - add Wenjia as SMC maintainer" * tag 'net-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits) wireguard: Kconfig: select CRYPTO_CHACHA_S390 crypto: s390 - do not depend on CRYPTO_HW for SIMD implementations wireguard: selftests: use microvm on x86 wireguard: selftests: always call kernel makefile wireguard: selftests: use virt machine on m68k wireguard: selftests: set fake real time in init r8169: fix accessing unset transport header net: rose: fix UAF bug caused by rose_t0timer_expiry usbnet: fix memory leak in error case Revert "tls: rx: move counting TlsDecryptErrors for sync" mptcp: update MIB_RMSUBFLOW in cmd_sf_destroy mptcp: fix local endpoint accounting selftests: mptcp: userspace PM support for MP_PRIO signals mptcp: netlink: issue MP_PRIO signals from userspace PMs mptcp: Acquire the subflow socket lock before modifying MP_PRIO flags mptcp: Avoid acquiring PM lock for subflow priority changes mptcp: fix locking in mptcp_nl_cmd_sf_destroy() net/mlx5e: Fix matchall police parameters validation net/sched: act_police: allow 'continue' action offload net: lan966x: hardcode the number of external ports ... -
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fixes from Linus Walleij: - Tag Intel pin control as supported in MAINTAINERS - Fix a NULL pointer exception in the Aspeed driver - Correct some NAND functions in the Sunxi A83T driver - Use the right offset for some Sunxi pins - Fix a zero base offset in the Freescale (NXP) i.MX93 - Fix the IRQ support in the STM32 driver * tag 'pinctrl-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: stm32: fix optional IRQ support to gpios pinctrl: imx: Add the zero base flag for imx93 pinctrl: sunxi: sunxi_pconf_set: use correct offset pinctrl: sunxi: a83t: Fix NAND function name for some pins pinctrl: aspeed: Fix potential NULL dereference in aspeed_pinmux_set_mux() MAINTAINERS: Update Intel pin control to Supported
-
Linus Torvalds authored
These are indeed "should not happen" situations, but it turns out recent changes made the 'task_is_stopped_or_trace()' case trigger (fix for that exists, is pending more testing), and the BUG_ON() makes it unnecessarily hard to actually debug for no good reason. It's been that way for a long time, but let's make it clear: BUG_ON() is not good for debugging, and should never be used in situations where you could just say "this shouldn't happen, but we can continue". Use WARN_ON_ONCE() instead to make sure it gets logged, and then just continue running. Instead of making the system basically unusuable because you crashed the machine while potentially holding some very core locks (eg this function is commonly called while holding 'tasklist_lock' for writing). Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org>
-
Kuniyuki Iwashima authored
Commit 6dd4142f ("Merge branch 'af_unix-per-netns-socket-hash'") and commit 51bae889 ("af_unix: Put pathname sockets in the global hash table.") changed a hash table layout. Before: unix_socket_table [0 - 255] : abstract & pathname sockets [256 - 511] : unnamed sockets After: per-netns table [0 - 255] : abstract & pathname sockets [256 - 511] : unnamed sockets bsd_socket_table [0 - 255] : pathname sockets (sk_bind_node) Now, while looking up sockets, we traverse the global table for the pathname sockets and the first half of each per-netns hash table for abstract sockets, where pathname sockets are also linked. Thus, the more pathname sockets we have, the longer we take to look up abstract sockets. This characteristic has been there before the layout change, but we can improve it now. This patch changes the per-netns hash table's layout so that sockets not requiring lookup reside in the first half and do not impact the lookup of abstract sockets. per-netns table [0 - 255] : pathname & unnamed sockets [256 - 511] : abstract sockets bsd_socket_table [0 - 255] : pathname sockets (sk_bind_node) We have run a test that bind()s 100,000 abstract/pathname sockets for each, bind()s an abstract socket 100,000 times and measures the time on __unix_find_socket_byname(). The result shows that the patch makes each lookup faster. Without this patch: $ sudo ./funclatency -p 2278 --microseconds __unix_find_socket_byname.isra.44 usec : count distribution 0 -> 1 : 0 | | 2 -> 3 : 0 | | 4 -> 7 : 0 | | 8 -> 15 : 126 | | 16 -> 31 : 1438 |* | 32 -> 63 : 4150 |*** | 64 -> 127 : 9049 |******* | 128 -> 255 : 37704 |******************************* | 256 -> 511 : 47533 |****************************************| With this patch: $ sudo ./funclatency -p 3648 --microseconds __unix_find_socket_byname.isra.46 usec : count distribution 0 -> 1 : 109 | | 2 -> 3 : 318 | | 4 -> 7 : 725 | | 8 -> 15 : 2501 |* | 16 -> 31 : 3061 |** | 32 -> 63 : 4028 |*** | 64 -> 127 : 9312 |******* | 128 -> 255 : 51372 |****************************************| 256 -> 511 : 28574 |********************** | Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20220705233715.759-1-kuniyu@amazon.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Jakub Kicinski authored
Jason A. Donenfeld says: ==================== wireguard patches for 5.19-rc6 1) A few small fixups to the selftests, per usual. Of particular note is a fix for a test flake that occurred on especially fast systems that boot in less than a second. 2) An addition during this cycle of some s390 crypto interacted with the way wireguard selects dependencies, resulting in linker errors reported by the kernel test robot. So Vladis sent in a patch for that, which also required a small preparatory fix moving some Kconfig symbols around. ==================== Link: https://lore.kernel.org/r/20220707003157.526645-1-Jason@zx2c4.comSigned-off-by:
-
Vladis Dronov authored
Select the new implementation of CHACHA20 for S390 when available. It is faster than the generic software implementation, but also prevents some linker errors in certain situations. Reported-by:
kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/linux-kernel/202207030630.6SZVkrWf-lkp@intel.com/Signed-off-by:
Vladis Dronov <vdronov@redhat.com> Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
Jason A. Donenfeld authored
Various accelerated software implementation Kconfig values for S390 were mistakenly placed into drivers/crypto/Kconfig, even though they're mainly just SIMD code and live in arch/s390/crypto/ like usual. This gives them the very unusual dependency on CRYPTO_HW, which leads to problems elsewhere. This patch fixes the issue by moving the Kconfig values for non-hardware drivers into the usual place in crypto/Kconfig. Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Jason A. Donenfeld authored
This makes for faster tests, faster compile time, and allows us to ditch ACPI finally. Signed-off-by:
-
Jason A. Donenfeld authored
These selftests are used for much more extensive changes than just the wireguard source files. So always call the kernel's build file, which will do something or nothing after checking the whole tree, per usual. Signed-off-by:
-
Jason A. Donenfeld authored
This should be a bit more stable hopefully. Signed-off-by:
-
Jason A. Donenfeld authored
Not all platforms have an RTC, and rather than trying to force one into each, it's much easier to just set a fixed time. This is necessary because WireGuard's latest handshakes parameter is returned in wallclock time, and if the system time isn't set, and the system is really fast, then this returns 0, which trips the test. Turning this on requires setting CONFIG_COMPAT_32BIT_TIME=y, as musl doesn't support settimeofday without it. Signed-off-by:
-
Christophe JAILLET authored
Use bitmap_empty() instead of hand-writing it. It is less verbose and it improves the semantic. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/78713a72414b99f673c3a9ec0519bb41c080935a.1657053343.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
Christophe JAILLET authored
Use bitmap_zalloc()/bitmap_free() instead of hand-writing them. It is less verbose and it improves the semantic. Signed-off-by:
-
Christophe JAILLET authored
Use bitmap_zalloc()/bitmap_free() instead of hand-writing them. It is less verbose and it improves the semantic. Signed-off-by:
-
