- 16 Aug, 2016 2 commits
-
-
Iyappan Subramanian authored
BugLink: http://bugs.launchpad.net/bugs/1613157Signed-off-by:
Iyappan Subramanian <isubramanian@apm.com> Signed-off-by:
Khuong Dinh <kdinh@apm.com> Signed-off-by:
Tanmay Inamdar <tinamdar@apm.com> Tested-by:
Toan Le <toanle@apm.com> Signed-off-by:
David S. Miller <davem@davemloft.net> (cherry picked from commit fc4262d2 linux-next) Signed-off-by:
Craig Magina <craig.magina@canonical.com> Acked-by:
Tim Gardner <tim.gardner@canonical.com> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Iyappan Subramanian authored
BugLink: http://bugs.launchpad.net/bugs/1613157Signed-off-by:
-
- 15 Aug, 2016 2 commits
-
-
Iyappan Subramanian authored
BugLink: http://bugs.launchpad.net/bugs/1611399 For interrupt controller that doesn't support irq_disable and hardware with level interrupt, an extra interrupt may be pending. This patch fixes the issue by setting IRQ_DISABLE_UNLAZY flag for the interrupt line, as suggested by, 'commit e9849777 ("genirq: Add flag to force mask in disable_irq[_nosync]()")' Signed-off-by:
-
AceLan Kao authored
BugLink: http://bugs.launchpad.net/bugs/1609606 Add MIC mute key which is found on HP Business Slim Keyboard T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 23 Spd=1.5 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=03f0 ProdID=2f4a Rev=00.10 S: Manufacturer=Chicony S: Product=HP Business Slim Keyboard C: #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid Signed-off-by:
AceLan Kao <acelan.kao@canonical.com> (cherry picked from commit 70e215824134543b75e33236a1988542e9202a07) Signed-off-by:
-
- 12 Aug, 2016 36 commits
-
-
Greg Kroah-Hartman authored
BugLink: http://bugs.launchpad.net/bugs/1611833Signed-off-by:
-
Miklos Szeredi authored
BugLink: http://bugs.launchpad.net/bugs/1611833 commit c1892c37 upstream. file_remove_privs() is called with inode lock on file_inode(), which proceeds to calling notify_change() on file->f_path.dentry. Which triggers the WARN_ON_ONCE(!inode_is_locked(inode)) in addition to deadlocking later when ovl_setattr tries to lock the underlying inode again. Fix this mess by not mixing the layers, but doing everything on underlying dentry/inode. Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Fixes: 07a2daab ("ovl: Copy up underlying inode's ->i_mode to overlay inode") Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Alexander Shishkin authored
BugLink: http://bugs.launchpad.net/bugs/1611833 commit a36aa80f upstream. Driver initialization tries to request a hub (GTH) driver module from its probe callback, resulting in a deadlock. This patch solves the problem by adding a deferred work for requesting the hub module. Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by:
-
Alexander Shishkin authored
BugLink: http://bugs.launchpad.net/bugs/1611833 commit 7a1a47ce upstream. This adds Intel(R) Trace Hub PCI ID for Kaby Lake PCH-H. Signed-off-by:
-
Dmitri Epshtein authored
BugLink: http://bugs.launchpad.net/bugs/1611833 commit 06708f81 upstream. Commit aebea2ba ("net: mvneta: fix Tx interrupt delay") intended to set coalescing threshold to a value guaranteeing interrupt generation per each sent packet, so that buffers can be released with no delay. In fact setting threshold to '1' was wrong, because it causes interrupt every two packets. According to the documentation a reason behind it is following - interrupt occurs once sent buffers counter reaches a value, which is higher than one specified in MVNETA_TXQ_SIZE_REG(q). This behavior was confirmed during tests. Also when testing the SoC working as a NAS device, better performance was observed with int-per-packet, as it strongly depends on the fact that all transmitted packets are released immediately. This commit enables NETA controller work in interrupt per sent packet mode by setting coalescing threshold to 0. Signed-off-by:
Dmitri Epshtein <dima@marvell.com> Signed-off-by:
Marcin Wojtas <mw@semihalf.com> Fixes aebea2ba ("net: mvneta: fix Tx interrupt delay") Acked-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Ilya Dryomov authored
BugLink: http://bugs.launchpad.net/bugs/1611833 commit 930c5328 upstream. Currently, osd_weight and osd_state fields are updated in the encoding order. This is wrong, because an incremental map may look like e.g. new_up_client: { osd=6, addr=... } # set osd_state and addr new_state: { osd=6, xorstate=EXISTS } # clear osd_state Suppose osd6's current osd_state is EXISTS (i.e. osd6 is down). After applying new_up_client, osd_state is changed to EXISTS | UP. Carrying on with the new_state update, we flip EXISTS and leave osd6 in a weird "!EXISTS but UP" state. A non-existent OSD is considered down by the mapping code 2087 for (i = 0; i < pg->pg_temp.len; i++) { 2088 if (ceph_osd_is_down(osdmap, pg->pg_temp.osds[i])) { 2089 if (ceph_can_shift_osds(pi)) 2090 continue; 2091 2092 temp->osds[temp->size++] = CRUSH_ITEM_NONE; and so requests get directed to the second OSD in the set instead of the first, resulting in OSD-side errors like: [WRN] : client.4239 192.168.122.21:0/2444980242 misdirected client.4239.1:2827 pg 2.5df899f2 to osd.4 not [1,4,6] in e680/680 and hung rbds on the client: [ 493.566367] rbd: rbd0: write 400000 at 11cc00000 (0) [ 493.566805] rbd: rbd0: result -6 xferred 400000 [ 493.567011] blk_update_request: I/O error, dev rbd0, sector 9330688 The fix is to decouple application from the decoding and: - apply new_weight first - apply new_state before new_up_client - twiddle osd_state flags if marking in - clear out some of the state if osd is destroyed Fixes: http://tracker.ceph.com/issues/14901Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Josh Durgin <jdurgin@redhat.com> Signed-off-by:
-
Tejun Heo authored
BugLink: http://bugs.launchpad.net/bugs/1611833 commit 1488a1e3 upstream. Since 34b48db6 ("block: remove artifical max_hw_sectors cap"), max_sectors is no longer limited to BLK_DEF_MAX_SECTORS and LITE-ON CX1-JB256-HP keeps timing out with higher max_sectors. Revert it to the previous value. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by: dgerasimov@gmail.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=121671 Fixes: 34b48db6 ("block: remove artifical max_hw_sectors cap") Signed-off-by:
-
Lukasz Gemborowski authored
BugLink: http://bugs.launchpad.net/bugs/1611833 commit 22ebf00e upstream. of_address_to_resource return 0 on successful call but devm_ioremap_resource is called only if it returns non-zero value Signed-off-by:
Lukasz Gemborowski <lukasz.gemborowski@nokia.com> Reviewed-by:
Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Alexey Dobriyan authored
BugLink: http://bugs.launchpad.net/bugs/1611833 commit 2c13ce8f upstream. Variable "now" seems to be genuinely used unintialized if branch if (CPUCLOCK_PERTHREAD(timer->it_clock)) { is not taken and branch if (unlikely(sighand == NULL)) { is taken. In this case the process has been reaped and the timer is marked as disarmed anyway. So none of the postprocessing of the sample is required. Return right away. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Link: http://lkml.kernel.org/r/20160707223911.GA26483@p183.telecom.bySigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Brian King authored
BugLink: http://bugs.launchpad.net/bugs/1611833 commit 54e430bb upstream. If we fall back to using LSI on the Croc or Crocodile chip we need to clear the interrupt so we don't hang the system. Tested-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Alan Stern authored
BugLink: http://bugs.launchpad.net/bugs/1611833 commit 5e7ff2ca upstream. Commit b704f70c ("SCSI: fix bug in scsi_dev_info_list matching") changed the way vendor- and model-string matching was carried out in the routine that looks up entries in a SCSI devinfo list. The new matching code failed to take into account the case of a maximum-length string; in such cases it could end up testing for a terminating '\0' byte beyond the end of the memory allocated to the string. This out-of-bounds bug was detected by UBSAN. I don't know if anybody has actually encountered this bug. The symptom would be that a device entry in the blacklist might not be matched properly if it contained an 8-character vendor name or a 16-character model name. Such entries certainly exist in scsi_static_device_list. This patch fixes the problem by adding a check for a maximum-length string before the '\0' test. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Fixes: b704f70c ("SCSI: fix bug in scsi_dev_info_list matching") Tested-by:
Wilfried Klaebe <linux-kernel@lebenslange-mailadresse.de> Signed-off-by:
-
Vegard Nossum authored
BugLink: http://bugs.launchpad.net/bugs/1611833 commit 3dad5424 upstream. If register_pernet_subsys() fails, we shouldn't try to call unregister_pernet_subsys(). Fixes: 467fa153 ("RDS-TCP: Support multiple RDS-TCP listen endpoints, one per netns.") Cc: Sowmini Varadhan <sowmini.varadhan@oracle.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Acked-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Oliver Hartkopp authored
BugLink: http://bugs.launchpad.net/bugs/1611833 commit 25e1ed6e upstream. For 'real' hardware CAN devices the netlink interface is used to set CAN specific communication parameters. Real CAN hardware can not be created nor removed with the ip tool ... This patch adds a private dellink function for the CAN device driver interface that does just nothing. It's a follow up to commit 993e6f2f ("can: fix oops caused by wrong rtnl newlink usage") but for dellink. Reported-by:
ajneu <ajneu1@gmail.com> Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Oliver Hartkopp authored
BugLink: http://bugs.launchpad.net/bugs/1611833 commit bce271f2 upstream. With upstream commit bb208f14 (can: fix handling of unmodifiable configuration options) a new can_validate() function was introduced. When invoking 'ip link set can0 type can' without any configuration data can_validate() tries to validate the content without taking into account that there's totally no content. This patch adds a check for missing content. Reported-by:
-
Thor Thayer authored
BugLink: http://bugs.launchpad.net/bugs/1611833 commit 427460c8 upstream. When testing CAN write floods on Altera's CycloneV, the first 2 bytes are sometimes 0x00, 0x00 or corrupted instead of the values sent. Also observed bytes 4 & 5 were corrupted in some cases. The D_CAN Data registers are 32 bits and changing from 16 bit writes to 32 bit writes fixes the problem. Testing performed on Altera CycloneV (D_CAN). Requesting tests on other C_CAN & D_CAN platforms. Reported-by:
Richard Andrysek <richard.andrysek@gomtec.de> Signed-off-by:
Thor Thayer <tthayer@opensource.altera.com> Signed-off-by:
-
Wolfgang Grandegger authored
BugLink: http://bugs.launchpad.net/bugs/1611833 commit 43200a44 upstream. At high bus load it could happen that "at91_poll()" enters with all RX message boxes filled up. If then at the end the "quota" is exceeded as well, "rx_next" will not be reset to the first RX mailbox and hence the interrupts remain disabled. Signed-off-by:
Wolfgang Grandegger <wg@grandegger.com> Tested-by:
Amr Bekhit <amrbekhit@gmail.com> Signed-off-by:
-
Stephane Eranian authored
BugLink: http://bugs.launchpad.net/bugs/1611833 commit 1424a09a upstream. This patch fixes broken PEBS support on Intel Atom and Core2 due to wrong pointer arithmetic in intel_pmu_drain_pebs_core(). The get_next_pebs_record_by_bit() was called on PEBS format fmt0 which does not use the pebs_record_nhm layout. Signed-off-by:
Stephane Eranian <eranian@google.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: kan.liang@intel.com Fixes: 21509084 ("perf/x86/intel: Handle multiple records in the PEBS buffer") Link: http://lkml.kernel.org/r/1449182000-31524-3-git-send-email-eranian@google.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Miklos Szeredi authored
BugLink: http://bugs.launchpad.net/bugs/1611833 commit b99c2d91 upstream. Before 4bacc9c9 ("overlayfs: Make f_path...") file->f_path pointed to the underlying file, hence suid/sgid removal on write worked fine. After that patch file->f_path pointed to the overlay file, and the file mode bits weren't copied to overlay_inode->i_mode. So the suid/sgid removal simply stopped working. The fix is to copy the mode bits, but then ovl_setattr() needs to clear ATTR_MODE to avoid the BUG() in notify_change(). So do this first, then in the next patch copy the mode. Reported-by:
Eryu Guan <eguan@redhat.com> Signed-off-by:
-
Peter Zijlstra authored
BugLink: http://bugs.launchpad.net/bugs/1611833 commit 7dd49125 upstream. Starting with the following commit: fde7d22e ("sched/fair: Fix overly small weight for interactive group entities") calc_tg_weight() doesn't compute the right value as expected by effective_load(). The difference is in the 'correction' term. In order to ensure \Sum rw_j >= rw_i we cannot use tg->load_avg directly, since that might be lagging a correction on the current cfs_rq->avg.load_avg value. Therefore we use tg->load_avg - cfs_rq->tg_load_avg_contrib + cfs_rq->avg.load_avg. Now, per the referenced commit, calc_tg_weight() doesn't use cfs_rq->avg.load_avg, as is later used in @w, but uses cfs_rq->load.weight instead. So stop using calc_tg_weight() and do it explicitly. The effects of this bug are wake_affine() making randomly poor choices in cgroup-intense workloads. Signed-off-by:
-
Taras Kondratiuk authored
BugLink: http://bugs.launchpad.net/bugs/1611833 commit f68381a7 upstream. The code that fills packed command header assumes that CPU runs in little-endian mode. Hence the header is malformed in big-endian mode and causes MMC data transfer errors: [ 563.200828] mmcblk0: error -110 transferring data, sector 2048, nr 8, cmd response 0x900, card status 0xc40 [ 563.219647] mmcblk0: packed cmd failed, nr 2, sectors 16, failure index: -1 Convert header data to LE. Signed-off-by:
Taras Kondratiuk <takondra@cisco.com> Fixes: ce39f9d1 ("mmc: support packed write command for eMMC4.5 devices") Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Omar Sandoval authored
BugLink: http://bugs.launchpad.net/bugs/1611833 commit 8ba86821 upstream. get_task_ioprio() accesses the task->io_context without holding the task lock and thus can race with exit_io_context(), leading to a use-after-free. The reproducer below hits this within a few seconds on my 4-core QEMU VM: #define _GNU_SOURCE #include <assert.h> #include <unistd.h> #include <sys/syscall.h> #include <sys/wait.h> int main(int argc, char **argv) { pid_t pid, child; long nproc, i; /* ioprio_set(IOPRIO_WHO_PROCESS, 0, IOPRIO_PRIO_VALUE(IOPRIO_CLASS_IDLE, 0)); */ syscall(SYS_ioprio_set, 1, 0, 0x6000); nproc = sysconf(_SC_NPROCESSORS_ONLN); for (i = 0; i < nproc; i++) { pid = fork(); assert(pid != -1); if (pid == 0) { for (;;) { pid = fork(); assert(pid != -1); if (pid == 0) { _exit(0); } else { child = wait(NULL); assert(child == pid); } } } pid = fork(); assert(pid != -1); if (pid == 0) { for (;;) { /* ioprio_get(IOPRIO_WHO_PGRP, 0); */ syscall(SYS_ioprio_get, 2, 0); } } } for (;;) { /* ioprio_get(IOPRIO_WHO_PGRP, 0); */ syscall(SYS_ioprio_get, 2, 0); } return 0; } This gets us KASAN dumps like this: [ 35.526914] ================================================================== [ 35.530009] BUG: KASAN: out-of-bounds in get_task_ioprio+0x7b/0x90 at addr ffff880066f34e6c [ 35.530009] Read of size 2 by task ioprio-gpf/363 [ 35.530009] ============================================================================= [ 35.530009] BUG blkdev_ioc (Not tainted): kasan: bad access detected [ 35.530009] ----------------------------------------------------------------------------- [ 35.530009] Disabling lock debugging due to kernel taint [ 35.530009] INFO: Allocated in create_task_io_context+0x2b/0x370 age=0 cpu=0 pid=360 [ 35.530009] ___slab_alloc+0x55d/0x5a0 [ 35.530009] __slab_alloc.isra.20+0x2b/0x40 [ 35.530009] kmem_cache_alloc_node+0x84/0x200 [ 35.530009] create_task_io_context+0x2b/0x370 [ 35.530009] get_task_io_context+0x92/0xb0 [ 35.530009] copy_process.part.8+0x5029/0x5660 [ 35.530009] _do_fork+0x155/0x7e0 [ 35.530009] SyS_clone+0x19/0x20 [ 35.530009] do_syscall_64+0x195/0x3a0 [ 35.530009] return_from_SYSCALL_64+0x0/0x6a [ 35.530009] INFO: Freed in put_io_context+0xe7/0x120 age=0 cpu=0 pid=1060 [ 35.530009] __slab_free+0x27b/0x3d0 [ 35.530009] kmem_cache_free+0x1fb/0x220 [ 35.530009] put_io_context+0xe7/0x120 [ 35.530009] put_io_context_active+0x238/0x380 [ 35.530009] exit_io_context+0x66/0x80 [ 35.530009] do_exit+0x158e/0x2b90 [ 35.530009] do_group_exit+0xe5/0x2b0 [ 35.530009] SyS_exit_group+0x1d/0x20 [ 35.530009] entry_SYSCALL_64_fastpath+0x1a/0xa4 [ 35.530009] INFO: Slab 0xffffea00019bcd00 objects=20 used=4 fp=0xffff880066f34ff0 flags=0x1fffe0000004080 [ 35.530009] INFO: Object 0xffff880066f34e58 @offset=3672 fp=0x0000000000000001 [ 35.530009] ================================================================== Fix it by grabbing the task lock while we poke at the io_context. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Dan Carpenter authored
BugLink: http://bugs.launchpad.net/bugs/1611833 commit 096cdc6f upstream. We verify "u_cmd.outsize" and "u_cmd.insize" but we need to make sure that those values have not changed between the two copy_from_user() calls. Otherwise it could lead to a buffer overflow. Additionally, cros_ec_cmd_xfer() can set s_cmd->insize to a lower value. We should use the new smaller value so we don't copy too much data to the user. Reported-by:
Pengfei Wang <wpengfeinudt@gmail.com> Fixes: a8411784 ('mfd: cros_ec: Use a zero-length array for command data') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Tested-by:
Gwendal Grignou <gwendal@chromium.org> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Heiko Stuebner authored
BugLink: http://bugs.launchpad.net/bugs/1611833 commit 595144c1 upstream. The flags element of clk_init_data was never initialized for mmc- phase-clocks resulting in the element containing a random value and thus possibly enabling unwanted clock flags. Fixes: 89bf26cb ("clk: rockchip: Add support for the mmc clock phases using the framework") Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Michal Suchanek authored
BugLink: http://bugs.launchpad.net/bugs/1611833 commit 6d9fe44b upstream. When testing SPI without DMA I noticed that filling the FIFO on the spi controller causes timeout. Always leave room for one byte in the FIFO. Signed-off-by:
Michal Suchanek <hramrach@gmail.com> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Michal Suchanek authored
BugLink: http://bugs.launchpad.net/bugs/1611833 commit 719bd654 upstream. The trasfer timeout is fixed at 1000 ms. Reading a 4Mbyte flash over 1MHz SPI bus takes way longer than that. Calculate the timeout from the actual time the transfer is supposed to take and multiply by 2 for good measure. Signed-off-by:
-
Andrey Ulanov authored
BugLink: http://bugs.launchpad.net/bugs/1611833 commit e06b933e upstream. - m_start() in fs/namespace.c expects that ns->event is incremented each time a mount added or removed from ns->list. - umount_tree() removes items from the list but does not increment event counter, expecting that it's done before the function is called. - There are some codepaths that call umount_tree() without updating "event" counter. e.g. from __detach_mounts(). - When this happens m_start may reuse a cached mount structure that no longer belongs to ns->list (i.e. use after free which usually leads to infinite loop). This change fixes the above problem by incrementing global event counter before invoking umount_tree(). Change-Id: I622c8e84dcb9fb63542372c5dbf0178ee86bb589 Signed-off-by:
Andrey Ulanov <andreyu@google.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Miklos Szeredi authored
BugLink: http://bugs.launchpad.net/bugs/1611833 commit b403f0e3 upstream. v9fs may be used as lower layer of overlayfs and accessing f_path.dentry can lead to a crash. In this case it's a NULL pointer dereference in p9_fid_create(). Fix by replacing direct access of file->f_path.dentry with the file_dentry() accessor, which will always return a native object. Reported-by:
Alessio Igor Bogani <alessioigorbogani@gmail.com> Signed-off-by:
-
Vegard Nossum authored
BugLink: http://bugs.launchpad.net/bugs/1611833 commit 7bc94916 upstream. Although the extent tree depth of 5 should enough be for the worst case of 2*32 extents of length 1, the extent tree code does not currently to merge nodes which are less than half-full with a sibling node, or to shrink the tree depth if possible. So it's possible, at least in theory, for the tree depth to be greater than 5. However, even in the worst case, a tree depth of 32 is highly unlikely, and if the file system is maliciously corrupted, an insanely large eh_depth can cause memory allocation failures that will trigger kernel warnings (here, eh_depth = 65280): JBD2: ext4.exe wants too many credits credits:195849 rsv_credits:0 max:256 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 50 at fs/jbd2/transaction.c:293 start_this_handle+0x569/0x580 CPU: 0 PID: 50 Comm: ext4.exe Not tainted 4.7.0-rc5+ #508 Stack: 604a8947 625badd8 0002fd09 00000000 60078643 00000000 62623910 601bf9bc 62623970 6002fc84 626239b0 900000125 Call Trace: [<6001c2dc>] show_stack+0xdc/0x1a0 [<601bf9bc>] dump_stack+0x2a/0x2e [<6002fc84>] __warn+0x114/0x140 [<6002fdff>] warn_slowpath_null+0x1f/0x30 [<60165829>] start_this_handle+0x569/0x580 [<60165d4e>] jbd2__journal_start+0x11e/0x220 [<60146690>] __ext4_journal_start_sb+0x60/0xa0 [<60120a81>] ext4_truncate+0x131/0x3a0 [<60123677>] ext4_setattr+0x757/0x840 [<600d5d0f>] notify_change+0x16f/0x2a0 [<600b2b16>] do_truncate+0x76/0xc0 [<600c3e56>] path_openat+0x806/0x1300 [<600c55c9>] do_filp_open+0x89/0xf0 [<600b4074>] do_sys_open+0x134/0x1e0 [<600b4140>] SyS_open+0x20/0x30 [<6001ea68>] handle_syscall+0x88/0x90 [<600295fd>] userspace+0x3fd/0x500 [<6001ac55>] fork_handler+0x85/0x90 ---[ end trace 08b0b88b6387a244 ]--- [ Commit message modified and the extent tree depath check changed from 5 to 32 -- tytso ] Cc: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Jeff Mahoney authored
BugLink: http://bugs.launchpad.net/bugs/1611833 commit f0fe970d upstream. There are legitimate reasons to disallow mmap on certain files, notably in sysfs or procfs. We shouldn't emulate mmap support on file systems that don't offer support natively. CVE-2016-1583 Signed-off-by:
Jeff Mahoney <jeffm@suse.com> [tyhicks: clean up f_op check by using ecryptfs_file_to_lower()] Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Signed-off-by:
-
Jeff Mahoney authored
BugLink: http://bugs.launchpad.net/bugs/1611833 commit 78c4e172 upstream. This reverts commit 2f36db71. It fixed a local root exploit but also introduced a dependency on the lower file system implementing an mmap operation just to open a file, which is a bit of a heavy hammer. The right fix is to have mmap depend on the existence of the mmap handler instead. Signed-off-by:
-
Miklos Szeredi authored
BugLink: http://bugs.launchpad.net/bugs/1611833 commit 6343a212 upstream. (Another one for the f_path debacle.) ltp fcntl33 testcase caused an Oops in selinux_file_send_sigiotask. The reason is that generic_add_lease() used filp->f_path.dentry->inode while all the others use file_inode(). This makes a difference for files opened on overlayfs since the former will point to the overlay inode the latter to the underlying inode. So generic_add_lease() added the lease to the overlay inode and generic_delete_lease() removed it from the underlying inode. When the file was released the lease remained on the overlay inode's lock list, resulting in use after free. Reported-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Rhyland Klein authored
BugLink: http://bugs.launchpad.net/bugs/1611833 commit 5bc28b93 upstream. Change power_supply_read_temp() to use power_supply_get_property() so that it will check the use_cnt and ensure it is > 0. The use_cnt will be incremented at the end of __power_supply_register, so this will block to case where get_property can be called before the supply is fully registered. This fixes the issue show in the stack below: [ 1.452598] power_supply_read_temp+0x78/0x80 [ 1.458680] thermal_zone_get_temp+0x5c/0x11c [ 1.464765] thermal_zone_device_update+0x34/0xb4 [ 1.471195] thermal_zone_device_register+0x87c/0x8cc [ 1.477974] __power_supply_register+0x364/0x424 [ 1.484317] power_supply_register_no_ws+0x10/0x18 [ 1.490833] bq27xxx_battery_setup+0x10c/0x164 [ 1.497003] bq27xxx_battery_i2c_probe+0xd0/0x1b0 [ 1.503435] i2c_device_probe+0x174/0x240 [ 1.509172] driver_probe_device+0x1fc/0x29c [ 1.515167] __driver_attach+0xa4/0xa8 [ 1.520643] bus_for_each_dev+0x58/0x98 [ 1.526204] driver_attach+0x20/0x28 [ 1.531505] bus_add_driver+0x1c8/0x22c [ 1.537067] driver_register+0x68/0x108 [ 1.542630] i2c_register_driver+0x38/0x7c [ 1.548457] bq27xxx_battery_i2c_driver_init+0x18/0x20 [ 1.555321] do_one_initcall+0x38/0x12c [ 1.560886] kernel_init_freeable+0x148/0x1ec [ 1.566972] kernel_init+0x10/0xfc [ 1.572101] ret_from_fork+0x10/0x40 Also make the same change to ps_get_max_charge_cntl_limit() and ps_get_cur_chrage_cntl_limit() to be safe. Lastly, change the return value of power_supply_get_property() to -EAGAIN from -ENODEV if use_cnt <= 0. Fixes: 297d716f ("power_supply: Change ownership from driver to core") Signed-off-by:
Rhyland Klein <rklein@nvidia.com> Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
-
Tejun Heo authored
BugLink: http://bugs.launchpad.net/bugs/1611833 commit 8fa3b8d6 upstream. If percpu_ref initialization fails during css_create(), the free path can end up trying to free css->id of zero. As ID 0 is unused, it doesn't cause a critical breakage but it does trigger a warning message. Fix it by setting css->id to -1 from init_and_link_css(). Signed-off-by:
-
Alexander Shiyan authored
BugLink: http://bugs.launchpad.net/bugs/1611833 commit ba562d5e upstream. Some PINs do not have a MUX register, it is not an error. It is necessary to allow the continuation of the PINs configuration, otherwise the whole PIN-group will be configured incorrectly. Signed-off-by:
Alexander Shiyan <shc_work@mail.ru> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Tony Lindgren authored
BugLink: http://bugs.launchpad.net/bugs/1611833 commit 0ac3c0a4 upstream. With many repeated suspend resume cycles, the pin specific wakeirq may not always work on omaps. This is because the write to enable the pin interrupt may not have reached the device over the interconnect before suspend happens. Let's fix the issue with a flush of posted write with a readback. Reported-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Minfei Huang authored
BugLink: http://bugs.launchpad.net/bugs/1611833 commit 749d088b upstream. Protocol for the "version" fields is: hypervisor raises it (making it uneven) before it starts updating the fields and raises it again (making it even) when it is done. Thus the guest can make sure the time values it got are consistent by checking the version before and after reading them. Add CPU barries after getting version value just like what function vread_pvclock does, because all of callees in this function is inline. Fixes: 502dfeffSigned-off-by:
Minfei Huang <mnghuan@gmail.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
