- 01 Apr, 2021 7 commits
-
-
Wan Jiabing authored
struct ctl_table_header is declared twice. One is declared at 46th line. The blew one is not needed. Remove the duplicate. Signed-off-by:
Wan Jiabing <wanjiabing@vivo.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wong Vee Khee authored
The commit d2a029bd ("stmmac: pci: add MSI support for Intel Quark X1000") introduced a pci_enable_msi() call in stmmac_pci.c. With the commit 58da0cfa ("net: stmmac: create dwmac-intel.c to contain all Intel platform"), Intel Quark platform related codes have been moved to the newly created driver. Removing this unnecessary pci_enable_msi() call as there are no other devices that uses stmmac-pci and need MSI to be enabled. Signed-off-by:
Wong Vee Khee <vee.khee.wong@linux.intel.com> Signed-off-by:
-
Wong Vee Khee authored
Update dwmac-intel to use managed function, i.e. pcim_enable_device(). This will allow devres framework to call resource free function for us. Signed-off-by:
-
Xu Jia authored
The logic in rt6_age_examine_exception is confusing. The commit is to refactor the code. Signed-off-by:
Xu Jia <xujia39@huawei.com> Signed-off-by:
-
Hoang Le authored
When enabling a bearer by name, we don't sanity check its name with higher slot in bearer list. This may have the effect that the name of an already enabled bearer bypasses the check. To fix the above issue, we just perform an extra checking with all existing bearers. Fixes: cb30a633 ("tipc: refactor function tipc_enable_bearer()") Cc: stable@vger.kernel.org Acked-by:
Jon Maloy <jmaloy@redhat.com> Signed-off-by:
Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueDavid S. Miller authored
Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2021-03-31 This series contains updates to ice driver only. Benita adds support for XPS. Ani moves netdev registration to the end of probe to prevent use before the interface is ready and moves up an error check to possibly avoid an unneeded call. He also consolidates the VSI state and flag fields to a single field. Dan changes the segment where package information is pulled. Paul S ensures correct ITR values are set when increasing ring size. Paul G rewords a link misconfiguration message as this could be expected. Bruce removes setting an unnecessary AQ flag and corrects a memory allocation call. Also fixes checkpatch issues for 'COMPLEX_MACRO'. Qi aligns PTYPE bitmap naming by adding 'ptype' prefix to the bitmaps missing it. Brett removes limiting Rx queue mapping to RSS size as there is not a dependency on this. He also refactors RSS configuration by introducing individual functions for LUT and key configuration and by passing a structure containing pertinent information instead of individual arguments. Tony corrects a comment block to follow netdev style. ==================== Signed-off-by: -
Carlos Llamas authored
SO_TXTIME hardware offload requires testing across devices, either between machines or separate network namespaces. Split up SO_TXTIME test into tx and rx modes, so traffic can be sent from one process to another. Create a veth-pair on different namespaces and bind each process to an end point via [-S]ource and [-D]estination parameters. Optional start [-t]ime parameter can be passed to synchronize the test across the hosts (with synchorinzed clocks). Signed-off-by:
Carlos Llamas <cmllamas@google.com> Reviewed-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
- 31 Mar, 2021 33 commits
-
-
Frank Wunderlich authored
mt7623 uses offload version 2 too tested on Bananapi-R2 Signed-off-by:
Frank Wunderlich <frank-w@public-files.de> Signed-off-by:
-
Voon Weifeng authored
Turn on the MEEAO field of MTL_ECC_Control_Register by default. As the MTL ECC Error Address Status Over-ride(MEEAO) is set by default, the following error address fields will hold the last valid address where the error is detected. Signed-off-by:
Voon Weifeng <weifeng.voon@intel.com> Signed-off-by:
Tan Tee Min <tee.min.tan@intel.com> Co-developed-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== XDP for NXP ENETC This series adds support to the enetc driver for the basic XDP primitives. The ENETC is a network controller found inside the NXP LS1028A SoC, which is a dual-core Cortex A72 device for industrial networking, with the CPUs clocked at up to 1.3 GHz. On this platform, there are 4 ENETC ports and a 6-port embedded DSA switch, in a topology that looks like this: +-------------------------------------------------------------------------+ | +--------+ 1 Gbps (typically disabled) | | ENETC PCI | ENETC |--------------------------+ | | Root Complex | port 3 |-----------------------+ | | | Integrated +--------+ | | | | Endpoint | | | | +--------+ 2.5 Gbps | | | | | ENETC |--------------+ | | | | | port 2 |-----------+ | | | | | +--------+ | | | | | | | | | | | | +------------------------------------------------+ | | | Felix | | Felix | | | | Switch | port 4 | | port 5 | | | | +--------+ +--------+ | | | | | +--------+ +--------+ | +--------+ +--------+ +--------+ +--------+ | | | ENETC | | ENETC | | | Felix | | Felix | | Felix | | Felix | | | | port 0 | | port 1 | | | port 0 | | port 1 | | port 2 | | port 3 | | +-------------------------------------------------------------------------+ | | | | | | v v v v v v Up to Up to Up to 4x 2.5Gbps 2.5Gbps 1Gbps The ENETC ports 2 and 3 can act as DSA masters for the embedded switch. Because 4 out of the 6 externally-facing ports of the SoC are switch ports, the most interesting use case for XDP on this device is in fact XDP_TX on the 2.5Gbps DSA master. Nonetheless, the results presented below are for IPv4 forwarding between ENETC port 0 (eno0) and port 1 (eno1) both configured for 1Gbps. There are two streams of IPv4/UDP datagrams with a frame length of 64 octets delivered at 100% port load to eno0 and to eno1. eno0 has a flow steering rule to process the traffic on RX ring 0 (CPU 0), and eno1 has a flow steering rule towards RX ring 1 (CPU 1). For the IPFWD test, standard IP routing was enabled in the netns. For the XDP_DROP test, the samples/bpf/xdp1 program was attached to both eno0 and to eno1. For the XDP_TX test, the samples/bpf/xdp2 program was attached to both eno0 and to eno1. For the XDP_REDIRECT test, the samples/bpf/xdp_redirect program was attached once to the input of eno0/output of eno1, and twice to the input of eno1/output of eno0. Finally, the preliminary results are as follows: | IPFWD | XDP_TX | XDP_REDIRECT | XDP_DROP --------+-------+--------+------------------------- fps | 761 | 2535 | 1735 | 2783 Gbps | 0.51 | 1.71 | 1.17 | n/a There is a strange phenomenon in my testing sistem where it appears that one CPU is processing more than the other. I have not investigated this too much. Also, the code might not be very well optimized (for example dma_sync_for_device is called with the full ENETC_RXB_DMA_SIZE_XDP). Design wise, the ENETC is a PCI device with BD rings, so it uses the MEM_TYPE_PAGE_SHARED memory model, as can typically be seen in Intel devices. The strategy was to build upon the existing model that the driver uses, and not change it too much. So you will see things like a separate NAPI poll function for XDP. I have only tested with PAGE_SIZE=4096, and since we split pages in half, it means that MTU-sized frames are scatter/gather (the XDP headroom + skb_shared_info only leaves us 1476 bytes of data per buffer). This is sub-optimal, but I would rather keep it this way and help speed up Lorenzo's series for S/G support through testing, rather than change the enetc driver to use some other memory model like page_pool. My code is already structured for S/G, and that works fine for XDP_DROP and XDP_TX, just not for XDP_REDIRECT, even between two enetc ports. So the S/G XDP_REDIRECT is stubbed out (the frames are dropped), but obviously I would like to remove that limitation soon. Please note that I am rather new to this kind of stuff, I am more of a control path person, so I would appreciate feedback. Enough talking, on to the patches. ==================== Signed-off-by: -
Vladimir Oltean authored
The driver implementation of the XDP_REDIRECT action reuses parts from XDP_TX, most notably the enetc_xdp_tx function which transmits an array of TX software BDs. Only this time, the buffers don't have DMA mappings, we need to create them. When a BPF program reaches the XDP_REDIRECT verdict for a frame, we can employ the same buffer reuse strategy as for the normal processing path and for XDP_PASS: we can flip to the other page half and seed that to the RX ring. Note that scatter/gather support is there, but disabled due to lack of multi-buffer support in XDP (which is added by this series): https://patchwork.kernel.org/project/netdevbpf/cover/cover.1616179034.git.lorenzo@kernel.org/Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
As explained in the XDP_TX patch, when receiving a burst of frames with the XDP_TX verdict, there is a momentary dip in the number of available RX buffers. The system will eventually recover as TX completions will start kicking in and refilling our RX BD ring again. But until that happens, we need to survive with as few out-of-buffer discards as possible. This increases the memory footprint of the driver in order to avoid discards at 2.5Gbps line rate 64B packet sizes, the maximum speed available for testing on 1 port on NXP LS1028A. Signed-off-by:
-
Vladimir Oltean authored
For reflecting packets back into the interface they came from, we create an array of TX software BDs derived from the RX software BDs. Therefore, we need to extend the TX software BD structure to contain most of the stuff that's already present in the RX software BD structure, for reasons that will become evident in a moment. For a frame with the XDP_TX verdict, we don't reuse any buffer right away as we do for XDP_DROP (the same page half) or XDP_PASS (the other page half, same as the skb code path). Because the buffer transfers ownership from the RX ring to the TX ring, reusing any page half right away is very dangerous. So what we can do is we can recycle the same page half as soon as TX is complete. The code path is: enetc_poll -> enetc_clean_rx_ring_xdp -> enetc_xdp_tx -> enetc_refill_rx_ring (time passes, another MSI interrupt is raised) enetc_poll -> enetc_clean_tx_ring -> enetc_recycle_xdp_tx_buff But that creates a problem, because there is a potentially large time window between enetc_xdp_tx and enetc_recycle_xdp_tx_buff, period in which we'll have less and less RX buffers. Basically, when the ship starts sinking, the knee-jerk reaction is to let enetc_refill_rx_ring do what it does for the standard skb code path (refill every 16 consumed buffers), but that turns out to be very inefficient. The problem is that we have no rx_swbd->page at our disposal from the enetc_reuse_page path, so enetc_refill_rx_ring would have to call enetc_new_page for every buffer that we refill (if we choose to refill at this early stage). Very inefficient, it only makes the problem worse, because page allocation is an expensive process, and CPU time is exactly what we're lacking. Additionally, there is an even bigger problem: if we let enetc_refill_rx_ring top up the ring's buffers again from the RX path, remember that the buffers sent to transmission haven't disappeared anywhere. They will be eventually sent, and processed in enetc_clean_tx_ring, and an attempt will be made to recycle them. But surprise, the RX ring is already full of new buffers, because we were premature in deciding that we should refill. So not only we took the expensive decision of allocating new pages, but now we must throw away perfectly good and reusable buffers. So what we do is we implement an elastic refill mechanism, which keeps track of the number of in-flight XDP_TX buffer descriptors. We top up the RX ring only up to the total ring capacity minus the number of BDs that are in flight (because we know that those BDs will return to us eventually). The enetc driver manages 1 RX ring per CPU, and the default TX ring management is the same. So we do XDP_TX towards the TX ring of the same index, because it is affined to the same CPU. This will probably not produce great results when we have a tc-taprio/tc-mqprio qdisc on the interface, because in that case, the number of TX rings might be greater, but I didn't add any checks for that yet (mostly because I didn't know what checks to add). It should also be noted that we need to change the DMA mapping direction for RX buffers, since they may now be reflected into the TX ring of the same device. We choose to use DMA_BIDIRECTIONAL instead of unmapping and remapping as DMA_TO_DEVICE, because performance is better this way. Signed-off-by:
-
Vladimir Oltean authored
For the RX ring, enetc uses an allocation scheme based on pages split into two buffers, which is already very efficient in terms of preventing reallocations / maximizing reuse, so I see no reason why I would change that. +--------+--------+--------+--------+--------+--------+--------+ | | | | | | | | | half B | half B | half B | half B | half B | half B | half B | | | | | | | | | +--------+--------+--------+--------+--------+--------+--------+ | | | | | | | | | half A | half A | half A | half A | half A | half A | half A | RX ring | | | | | | | | +--------+--------+--------+--------+--------+--------+--------+ ^ ^ | | next_to_clean next_to_alloc next_to_use +--------+--------+--------+--------+--------+ | | | | | | | half B | half B | half B | half B | half B | | | | | | | +--------+--------+--------+--------+--------+--------+--------+ | | | | | | | | | half B | half B | half A | half A | half A | half A | half A | RX ring | | | | | | | | +--------+--------+--------+--------+--------+--------+--------+ | | | ^ ^ | half A | half A | | | | | | next_to_clean next_to_use +--------+--------+ ^ | next_to_alloc then when enetc_refill_rx_ring is called, whose purpose is to advance next_to_use, it sees that it can take buffers up to next_to_alloc, and it says "oh, hey, rx_swbd->page isn't NULL, I don't need to allocate one!". The only problem is that for default PAGE_SIZE values of 4096, buffer sizes are 2048 bytes. While this is enough for normal skb allocations at an MTU of 1500 bytes, for XDP it isn't, because the XDP headroom is 256 bytes, and including skb_shared_info and alignment, we end up being able to make use of only 1472 bytes, which is insufficient for the default MTU. To solve that problem, we implement scatter/gather processing in the driver, because we would really like to keep the existing allocation scheme. A packet of 1500 bytes is received in a buffer of 1472 bytes and another one of 28 bytes. Because the headroom required by XDP is different (and much larger) than the one required by the network stack, whenever a BPF program is added or deleted on the port, we drain the existing RX buffers and seed new ones with the required headroom. We also keep the required headroom in rx_ring->buffer_offset. The simplest way to implement XDP_PASS, where an skb must be created, is to create an xdp_buff based on the next_to_clean RX BDs, but not clear those BDs from the RX ring yet, just keep the original index at which the BDs for this frame started. Then, if the verdict is XDP_PASS, instead of converting the xdb_buff to an skb, we replay a call to enetc_build_skb (just as in the normal enetc_clean_rx_ring case), starting from the original BD index. We would also like to be minimally invasive to the regular RX data path, and not check whether there is a BPF program attached to the ring on every packet. So we create a separate RX ring processing function for XDP. Because we only install/remove the BPF program while the interface is down, we forgo the rcu_read_lock() in enetc_clean_rx_ring, since there shouldn't be any circumstance in which we are processing packets and there is a potentially freed BPF program attached to the RX ring. Signed-off-by: -
Vladimir Oltean authored
For XDP_TX, we need to call enetc_reuse_page from enetc_clean_tx_ring, so we need to avoid a forward declaration. Signed-off-by:
-
Vladimir Oltean authored
With the future introduction of some new fields into enetc_tx_swbd such as is_xdp_tx, is_xdp_redirect etc, we need not only to set these bits to true from the XDP_TX/XDP_REDIRECT code path, but also to false from the old code paths. This is because TX software buffer descriptors are kept in a ring that is shadow of the hardware TX ring, so these structures keep getting reused, and there is always the possibility that when a software BD is reused (after we ran a full circle through the TX ring), the old user of the tx_swbd had set is_xdp_tx = true, and now we are sending a regular skb, which would need to set is_xdp_tx = false. To be minimally invasive to the old code paths, let's just scrub the software TX BD in the TX confirmation path (enetc_clean_tx_ring), once we know that nobody uses this software TX BD (tx_ring->next_to_clean hasn't yet been updated, and the TX paths check enetc_bd_unused which tells them if there's any more space in the TX ring for a new enqueue). Signed-off-by:
-
Vladimir Oltean authored
In the transmit path, if we have a scatter/gather frame, it is put into multiple software buffer descriptors, the last of which has the skb pointer populated (which is necessary for rearming the TX MSI vector and for collecting the two-step TX timestamp from the TX confirmation path). At the moment, this is sufficient, but with XDP_TX, we'll need to service TX software buffer descriptors that don't have an skb pointer, however they might be final nonetheless. So add a dedicated bit for final software BDs that we populate and check explicitly. Also, we keep looking just for an skb when doing TX timestamping, because we don't want/need that for XDP. Signed-off-by:
-
Vladimir Oltean authored
We need to build an skb from two code paths now: from the plain RX data path and from the XDP data path when the verdict is XDP_PASS. Create a new enetc_build_skb function which contains the essential steps for building an skb based on the first and last positions of buffer descriptors within the RX ring. We also squash the enetc_process_skb function into enetc_build_skb, because what that function did wasn't very meaningful on its own. The "rx_frm_cnt++" instruction has been moved around napi_gro_receive for cosmetic reasons, to be in the same spot as rx_byte_cnt++, which itself must be before napi_gro_receive, because that's when we lose ownership of the skb. Signed-off-by:
-
Vladimir Oltean authored
We can and should check the RX BD errors before starting to build the skb. The only apparent reason why things are done in this backwards order is to spare one call to enetc_rxbd_next. Signed-off-by:
-
Eric Dumazet authored
My previous commits added a dev_hold() in tunnels ndo_init(), but forgot to remove it from special functions setting up fallback tunnels. Fallback tunnels do call their respective ndo_init() This leads to various reports like : unregister_netdevice: waiting for ip6gre0 to become free. Usage count = 2 Fixes: 48bb5697 ("ip6_tunnel: sit: proper dev_{hold|put} in ndo_[un]init methods") Fixes: 6289a98f ("sit: proper dev_{hold|put} in ndo_[un]init methods") Fixes: 40cb881b ("ip6_vti: proper dev_{hold|put} in ndo_[un]init methods") Fixes: 7f700334 ("ip6_gre: proper dev_{hold|put} in ndo_[un]init methods") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Yang Yingliang authored
Add the missing destroy_workqueue() before return from tipc_crypto_start() in the error handling case. Fixes: 1ef6f7c9 ("tipc: add automatic session key exchange") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
David S. Miller authored
Eric Dumazet says: ==================== inet: shrink netns_ipv{4|6} This patch series work on reducing footprint of netns_ipv4 and netns_ipv6. Some sysctls are converted to bytes, and some fields are moves to reduce number of holes and paddings. ==================== Signed-off-by: -
Eric Dumazet authored
ip6_dst_ops have cache line alignement. Moving it at beginning of netns_ipv6 removes a 48 byte hole, and shrinks netns_ipv6 from 12 to 11 cache lines. Signed-off-by:
-
Eric Dumazet authored
Convert most sysctls that can fit in a byte. Signed-off-by:
-
Eric Dumazet authored
tcp_comp_sack_nr max value was already 255. Signed-off-by:
-
Eric Dumazet authored
This sysctl is a bool, can use less storage. Signed-off-by:
-
Eric Dumazet authored
Make room for better packing of netns_ipv4 Signed-off-by:
-
Eric Dumazet authored
Reduce footprint of sysctls. Signed-off-by:
-
Eric Dumazet authored
Reduce footprint of sysctls. Signed-off-by:
-
Eric Dumazet authored
By shuffling around some fields to remove 8 bytes of hole, we can save one cache line. pahole result before/after the patch : /* size: 768, cachelines: 12, members: 139 */ /* sum members: 673, holes: 11, sum holes: 39 */ /* padding: 56 */ /* paddings: 2, sum paddings: 7 */ /* forced alignments: 1 */ -> /* size: 704, cachelines: 11, members: 139 */ /* sum members: 673, holes: 10, sum holes: 31 */ /* paddings: 2, sum paddings: 7 */ /* forced alignments: 1 */ Signed-off-by:
-
Eric Dumazet authored
struct inet_timewait_death_row uses two cache lines, because we want tw_count to use a full cache line to avoid false sharing. Rework its definition and placement in netns_ipv4 so that: 1) We add 60 bytes of padding after tw_count to avoid false sharing, knowing that tcp_death_row will have ____cacheline_aligned_in_smp attribute. 2) We do not risk padding before tcp_death_row, because we move it at the beginning of netns_ipv4, even if new fields are added later. 3) We do not waste 48 bytes of padding after it. Note that I have not changed dccp. pahole result for struct netns_ipv4 before/after the patch : /* size: 832, cachelines: 13, members: 139 */ /* sum members: 721, holes: 12, sum holes: 95 */ /* padding: 16 */ /* paddings: 2, sum paddings: 55 */ -> /* size: 768, cachelines: 12, members: 139 */ /* sum members: 673, holes: 11, sum holes: 39 */ /* padding: 56 */ /* paddings: 2, sum paddings: 7 */ /* forced alignments: 1 */ Signed-off-by:
-
David S. Miller authored
Weihang Li says: ==================== net: fix some coding style issues Do some cleanups according to the coding style of kernel, including wrong print type, redundant and missing spaces and so on. ==================== Signed-off-by: -
Yangyang Li authored
Fix the following format warning: 1. Block comments use * on subsequent lines 2. Block comments use a trailing */ on a separate line Signed-off-by:
Yangyang Li <liyangyang20@huawei.com> Signed-off-by:
Weihang Li <liweihang@huawei.com> Signed-off-by:
-
Yixing Liu authored
Use a trailling */ on a separate line for block comments. Signed-off-by:
Yixing Liu <liuyixing1@huawei.com> Signed-off-by:
-
Yixing Liu authored
Use a tralling */ on a separate line for block comments. Signed-off-by:
-
Yixing Liu authored
There should be a blank line after declarations. Signed-off-by:
-
Yixing Liu authored
Delete unncecessary spaces and add some reasonable spaces according to the coding-style of kernel. Signed-off-by:
-
Yixing Liu authored
Remove the redundant "for" from the commment. Signed-off-by:
-
Yixing Liu authored
Use "%u" to replace "hu%". Signed-off-by:
-
Matthew Wilcox (Oracle) authored
The XArray interface is easier for this driver to use. Also fixes a bug reported by the improper use of GFP_ATOMIC. Signed-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by:
-
