- 09 Mar, 2018 40 commits
-
-
Eric Dumazet authored
[ Upstream commit a5f7add3 ] pfifo_fast got percpu stats lately, uncovering a bug I introduced last year in linux-4.10. I missed the fact that we have to clear our temporary storage before calling __gnet_stats_copy_basic() in the case of percpu stats. Without this fix, rate estimators (tc qd replace dev xxx root est 1sec 4sec pfifo_fast) are utterly broken. Fixes: 1c0d32fd ("net_sched: gen_estimator: complete rewrite of rate estimators") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Inbar Karmy authored
[ Upstream commit ef7a3518 ] When GRO is off, the transport header pointer in sk_buff is initialized to network's header. To find the udp header, instead of using udp_hdr() which assumes skb_network_header was set, manually calculate the udp header offset. Fixes: 0952da79 ("net/mlx5e: Add support for loopback selftest") Signed-off-by:
Inbar Karmy <inbark@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Tonghao Zhang authored
[ Upstream commit a61a86f8 ] The SK_MEM_QUANTUM was changed from PAGE_SIZE to 4096. And the tcp_wmem/tcp_rmem min default values are 4096. Fixes: bd68a2a8 ("net: set SK_MEM_QUANTUM to 4096") Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 350c9f48 ] BBR uses tcp_tso_autosize() in an attempt to probe what would be the burst sizes and to adjust cwnd in bbr_target_cwnd() with following gold formula : /* Allow enough full-sized skbs in flight to utilize end systems. */ cwnd += 3 * bbr->tso_segs_goal; But GSO can be lacking or be constrained to very small units (ip link set dev ... gso_max_segs 2) What we really want is to have enough packets in flight so that both GSO and GRO are efficient. So in the case GSO is off or downgraded, we still want to have the same number of packets in flight as if GSO/TSO was fully operational, so that GRO can hopefully be working efficiently. To fix this issue, we make tcp_tso_autosize() unaware of sk->sk_gso_max_segs Only tcp_tso_segs() has to enforce the gso_max_segs limit. Tested: ethtool -K eth0 tso off gso off tc qd replace dev eth0 root pfifo_fast Before patch: for f in {1..5}; do ./super_netperf 1 -H lpaa24 -- -K bbr; done 691 (ss -temoi shows cwnd is stuck around 6 ) 667 651 631 517 After patch : # for f in {1..5}; do ./super_netperf 1 -H lpaa24 -- -K bbr; done 1733 (ss -temoi shows cwnd is around 386 ) 1778 1746 1781 1718 Fixes: 0f8782ea ("tcp_bbr: add BBR congestion control") Signed-off-by:
Oleksandr Natalenko <oleksandr@natalenko.name> Acked-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
David Howells authored
[ Upstream commit 93c62c45 ] All the kernel_sendmsg() calls in rxrpc_send_data_packet() need to send both parts of the iov[] buffer, but one of them does not. Fix it so that it does. Without this, short IPv6 rxrpc DATA packets may be seen that have the rxrpc header included, but no payload. Fixes: 5a924b89 ("rxrpc: Don't store the rxrpc header in the Tx queue sk_buffs") Reported-by:
Marc Dionne <marc.dionne@auristor.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Ilya Lesokhin authored
[ Upstream commit 808cf9e3 ] Avoid SKB coalescing if eor bit is set in one of the relevant SKBs. Fixes: c134ecb8 ("tcp: Make use of MSG_EOR in tcp_sendmsg") Signed-off-by:
Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by:
-
Heiner Kallweit authored
[ Upstream commit 08f51385 ] This condition wasn't adjusted when PHY_IGNORE_INTERRUPT (-2) was added long ago. In case of PHY_IGNORE_INTERRUPT the MAC interrupt indicates also PHY state changes and we should do what the symbol says. Fixes: 84a527a4 ("net: phylib: fix interrupts re-enablement in phy_start") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Gal Pressman authored
[ Upstream commit 2f0db879 ] When allocating a drop rq, no numa node is explicitly set which means allocations are done on node zero. This is not necessarily the nearest numa node to the HCA, and even worse, might even be a memoryless numa node. Choose the numa_node given to us by the pci device in order to properly allocate the coherent dma memory instead of assuming zero is valid. Fixes: 556dd1b9 ("net/mlx5e: Set drop RQ's necessary parameters only") Signed-off-by:
Gal Pressman <galp@mellanox.com> Signed-off-by:
-
Shalom Toledo authored
[ Upstream commit 0a8a1bf1 ] Until now, we assumed that in case of error when adding FDB entries, the write operation will fail, but this is not the case. Instead, we need to check that the number of entries reported in the response is equal to the number of entries specified in the request. Fixes: 56ade8fe ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Reported-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Shalom Toledo <shalomt@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Tommi Rantala authored
[ Upstream commit 4a31a6b1 ] Fix dst reference count leak in sctp_v4_get_dst() introduced in commit 410f0383 ("sctp: add routing output fallback"): When walking the address_list, successive ip_route_output_key() calls may return the same rt->dst with the reference incremented on each call. The code would not decrement the dst refcount when the dst pointer was identical from the previous iteration, causing the dst refcnt leak. Testcase: ip netns add TEST ip netns exec TEST ip link set lo up ip link add dummy0 type dummy ip link add dummy1 type dummy ip link add dummy2 type dummy ip link set dev dummy0 netns TEST ip link set dev dummy1 netns TEST ip link set dev dummy2 netns TEST ip netns exec TEST ip addr add 192.168.1.1/24 dev dummy0 ip netns exec TEST ip link set dummy0 up ip netns exec TEST ip addr add 192.168.1.2/24 dev dummy1 ip netns exec TEST ip link set dummy1 up ip netns exec TEST ip addr add 192.168.1.3/24 dev dummy2 ip netns exec TEST ip link set dummy2 up ip netns exec TEST sctp_test -H 192.168.1.2 -P 20002 -h 192.168.1.1 -p 20000 -s -B 192.168.1.3 ip netns del TEST In 4.4 and 4.9 kernels this results to: [ 354.179591] unregister_netdevice: waiting for lo to become free. Usage count = 1 [ 364.419674] unregister_netdevice: waiting for lo to become free. Usage count = 1 [ 374.663664] unregister_netdevice: waiting for lo to become free. Usage count = 1 [ 384.903717] unregister_netdevice: waiting for lo to become free. Usage count = 1 [ 395.143724] unregister_netdevice: waiting for lo to become free. Usage count = 1 [ 405.383645] unregister_netdevice: waiting for lo to become free. Usage count = 1 ... Fixes: 410f0383 ("sctp: add routing output fallback") Fixes: 0ca50d12 ("sctp: fix src address selection if using secondary addresses") Signed-off-by:
Tommi Rantala <tommi.t.rantala@nokia.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Gal Pressman authored
[ Upstream commit 8babd44d ] When receiving an LRO packet, the checksum field is set by the hardware to the checksum of the first coalesced packet. Obviously, this checksum is not valid for the merged LRO packet and should be fixed. We can use the CQE checksum which covers the checksum of the entire merged packet TCP payload to help us calculate the checksum incrementally. Tested by sending IPv4/6 traffic with LRO enabled, RX checksum disabled and watching nstat checksum error counters (in addition to the obvious bandwidth drop caused by checksum errors). This bug is usually "hidden" since LRO packets would go through the CHECKSUM_UNNECESSARY flow which does not validate the packet checksum. It's important to note that previous to this patch, LRO packets provided with CHECKSUM_UNNECESSARY are indeed packets with a correct validated checksum (even though the checksum inside the TCP header is incorrect), since the hardware LRO aggregation is terminated upon receiving a packet with bad checksum. Fixes: e586b3b0 ("net/mlx5: Ethernet Datapath files") Signed-off-by:
-
Alexey Kodanev authored
[ Upstream commit 15f35d49 ] Since UDP-Lite is always using checksum, the following path is triggered when calculating pseudo header for it: udp4_csum_init() or udp6_csum_init() skb_checksum_init_zero_check() __skb_checksum_validate_complete() The problem can appear if skb->len is less than CHECKSUM_BREAK. In this particular case __skb_checksum_validate_complete() also invokes __skb_checksum_complete(skb). If UDP-Lite is using partial checksum that covers only part of a packet, the function will return bad checksum and the packet will be dropped. It can be fixed if we skip skb_checksum_init_zero_check() and only set the required pseudo header checksum for UDP-Lite with partial checksum before udp4_csum_init()/udp6_csum_init() functions return. Fixes: ed70fcfc ("net: Call skb_checksum_init in IPv4") Fixes: e4f45b7f ("net: Call skb_checksum_init in IPv6") Signed-off-by:
Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by:
-
Alexey Kodanev authored
[ Upstream commit 07f2c7ab ] When SCTP makes INIT or INIT_ACK packet the total chunk length can exceed SCTP_MAX_CHUNK_LEN which leads to kernel panic when transmitting these packets, e.g. the crash on sending INIT_ACK: [ 597.804948] skbuff: skb_over_panic: text:00000000ffae06e4 len:120168 put:120156 head:000000007aa47635 data:00000000d991c2de tail:0x1d640 end:0xfec0 dev:<NULL> ... [ 597.976970] ------------[ cut here ]------------ [ 598.033408] kernel BUG at net/core/skbuff.c:104! [ 600.314841] Call Trace: [ 600.345829] <IRQ> [ 600.371639] ? sctp_packet_transmit+0x2095/0x26d0 [sctp] [ 600.436934] skb_put+0x16c/0x200 [ 600.477295] sctp_packet_transmit+0x2095/0x26d0 [sctp] [ 600.540630] ? sctp_packet_config+0x890/0x890 [sctp] [ 600.601781] ? __sctp_packet_append_chunk+0x3b4/0xd00 [sctp] [ 600.671356] ? sctp_cmp_addr_exact+0x3f/0x90 [sctp] [ 600.731482] sctp_outq_flush+0x663/0x30d0 [sctp] [ 600.788565] ? sctp_make_init+0xbf0/0xbf0 [sctp] [ 600.845555] ? sctp_check_transmitted+0x18f0/0x18f0 [sctp] [ 600.912945] ? sctp_outq_tail+0x631/0x9d0 [sctp] [ 600.969936] sctp_cmd_interpreter.isra.22+0x3be1/0x5cb0 [sctp] [ 601.041593] ? sctp_sf_do_5_1B_init+0x85f/0xc30 [sctp] [ 601.104837] ? sctp_generate_t1_cookie_event+0x20/0x20 [sctp] [ 601.175436] ? sctp_eat_data+0x1710/0x1710 [sctp] [ 601.233575] sctp_do_sm+0x182/0x560 [sctp] [ 601.284328] ? sctp_has_association+0x70/0x70 [sctp] [ 601.345586] ? sctp_rcv+0xef4/0x32f0 [sctp] [ 601.397478] ? sctp6_rcv+0xa/0x20 [sctp] ... Here the chunk size for INIT_ACK packet becomes too big, mostly because of the state cookie (INIT packet has large size with many address parameters), plus additional server parameters. Later this chunk causes the panic in skb_put_data(): skb_packet_transmit() sctp_packet_pack() skb_put_data(nskb, chunk->skb->data, chunk->skb->len); 'nskb' (head skb) was previously allocated with packet->size from u16 'chunk->chunk_hdr->length'. As suggested by Marcelo we should check the chunk's length in _sctp_make_chunk() before trying to allocate skb for it and discard a chunk if its size bigger than SCTP_MAX_CHUNK_LEN. Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leinter@gmail.com> Acked-by:
-
Guillaume Nault authored
[ Upstream commit 77f840e3 ] PPP units don't hold any reference on the channels connected to it. It is the channel's responsibility to ensure that it disconnects from its unit before being destroyed. In practice, this is ensured by ppp_unregister_channel() disconnecting the channel from the unit before dropping a reference on the channel. However, it is possible for an unregistered channel to connect to a PPP unit: register a channel with ppp_register_net_channel(), attach a /dev/ppp file to it with ioctl(PPPIOCATTCHAN), unregister the channel with ppp_unregister_channel() and finally connect the /dev/ppp file to a PPP unit with ioctl(PPPIOCCONNECT). Once in this situation, the channel is only held by the /dev/ppp file, which can be released at anytime and free the channel without letting the parent PPP unit know. Then the ppp structure ends up with dangling pointers in its ->channels list. Prevent this scenario by forbidding unregistered channels from connecting to PPP units. This maintains the code logic by keeping ppp_unregister_channel() responsible from disconnecting the channel if necessary and avoids modification on the reference counting mechanism. This issue seems to predate git history (successfully reproduced on Linux 2.6.26 and earlier PPP commits are unrelated). Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Roman Kapl authored
[ Upstream commit 5ae437ad ] So far, if the filter was too large to fit in the allocated skb, the kernel did not return any error and stopped dumping. Modify the dumper so that it returns -EMSGSIZE when a filter fails to dump and it is the first filter in the skb. If we are not first, we will get a next chance with more room. I understand this is pretty near to being an API change, but the original design (silent truncation) can be considered a bug. Note: The error case can happen pretty easily if you create a filter with 32 actions and have 4kb pages. Also recent versions of iproute try to be clever with their buffer allocation size, which in turn leads to Signed-off-by:
Roman Kapl <code@rkapl.cz> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Nicolas Dichtel authored
[ Upstream commit cb9f7a9a ] Nowadays, nlmsg_multicast() returns only 0 or -ESRCH but this was not the case when commit 134e6375 was pushed. However, there was no reason to stop the loop if a netns does not have listeners. Returns -ESRCH only if there was no listeners in all netns. To avoid having the same problem in the future, I didn't take the assumption that nlmsg_multicast() returns only 0 or -ESRCH. Fixes: 134e6375 ("genetlink: make netns aware") CC: Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Sabrina Dubroca authored
[ Upstream commit c7272c2f ] According to RFC 1191 sections 3 and 4, ICMP frag-needed messages indicating an MTU below 68 should be rejected: A host MUST never reduce its estimate of the Path MTU below 68 octets. and (talking about ICMP frag-needed's Next-Hop MTU field): This field will never contain a value less than 68, since every router "must be able to forward a datagram of 68 octets without fragmentation". Furthermore, by letting net.ipv4.route.min_pmtu be set to negative values, we can end up with a very large PMTU when (-1) is cast into u32. Let's also make ip_rt_min_pmtu a u32, since it's only ever compared to unsigned ints. Reported-by:
Jianlin Shi <jishi@redhat.com> Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit ac5b7019 ] netif_set_real_num_tx_queues() can be called when netdev is up. That usually happens when user requests change of number of channels/rings with ethtool -L. The procedure for changing the number of queues involves resetting the qdiscs and setting dev->num_tx_queues to the new value. When the new value is lower than the old one, extra care has to be taken to ensure ordering of accesses to the number of queues vs qdisc reset. Currently the queues are reset before new dev->num_tx_queues is assigned, leaving a window of time where packets can be enqueued onto the queues going down, leading to a likely crash in the drivers, since most drivers don't check if TX skbs are assigned to an active queue. Fixes: e6484930 ("net: allocate tx queues in register_netdevice") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Grygorii Strashko authored
[ Upstream commit 62f94c21 ] It was discovered that simple program which indefinitely sends 200b UDP packets and runs on TI AM574x SoC (SMP) under RT Kernel triggers network watchdog timeout in TI CPSW driver (<6 hours run). The network watchdog timeout is triggered due to race between cpsw_ndo_start_xmit() and cpsw_tx_handler() [NAPI] cpsw_ndo_start_xmit() if (unlikely(!cpdma_check_free_tx_desc(txch))) { txq = netdev_get_tx_queue(ndev, q_idx); netif_tx_stop_queue(txq); ^^ as per [1] barier has to be used after set_bit() otherwise new value might not be visible to other cpus } cpsw_tx_handler() if (unlikely(netif_tx_queue_stopped(txq))) netif_tx_wake_queue(txq); and when it happens ndev TX queue became disabled forever while driver's HW TX queue is empty. Fix this, by adding smp_mb__after_atomic() after netif_tx_stop_queue() calls and double check for free TX descriptors after stopping ndev TX queue - if there are free TX descriptors wake up ndev TX queue. [1] https://www.kernel.org/doc/html/latest/core-api/atomic_ops.htmlSigned-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by:
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by:
-
Wolfram Sang authored
[ Upstream commit a3276892 ] Due to a typo, the mask was destroyed by a comparison instead of a bit shift. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit ca79bec2 ] gcc-8 has a new warning that detects overlapping input and output arguments in memcpy(). It triggers for sit_init_net() calling ipip6_tunnel_clone_6rd(), which is actually correct: net/ipv6/sit.c: In function 'sit_init_net': net/ipv6/sit.c:192:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict] The problem here is that the logic detecting the memcpy() arguments finds them to be the same, but the conditional that tests for the input and output of ipip6_tunnel_clone_6rd() to be identical is not a compile-time constant. We know that netdev_priv(t->dev) is the same as t for a tunnel device, and comparing "dev" directly here lets the compiler figure out as well that 'dev == sitn->fb_tunnel_dev' when called from sit_init_net(), so it no longer warns. This code is old, so Cc stable to make sure that we don't get the warning for older kernels built with new gcc. Cc: Martin Sebor <msebor@gmail.com> Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83456Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Denis Du authored
[ Upstream commit b6c3bad1 ] Sometimes when physical lines have a just good noise to make the protocol handshaking fail, but the carrier detect still good. Then after remove of the noise, nobody will trigger this protocol to be start again to cause the link to never come back. The fix is when the carrier is still on, not terminate the protocol handshaking. Signed-off-by:
Denis Du <dudenis2000@yahoo.ca> Signed-off-by:
-
Stefano Brivio authored
[ Upstream commit a8c6db1d ] In fib_nh_match(), if output interface or gateway are passed in the FIB configuration, we don't have to check next hops of multipath routes to conclude whether we have a match or not. However, we might still have routes with different realms matching the same output interface and gateway configuration, and this needs to cause the match to fail. Otherwise the first route inserted in the FIB will match, regardless of the realms: # ip route add 1.1.1.1 dev eth0 table 1234 realms 1/2 # ip route append 1.1.1.1 dev eth0 table 1234 realms 3/4 # ip route list table 1234 1.1.1.1 dev eth0 scope link realms 1/2 1.1.1.1 dev eth0 scope link realms 3/4 # ip route del 1.1.1.1 dev ens3 table 1234 realms 3/4 # ip route list table 1234 1.1.1.1 dev ens3 scope link realms 3/4 whereas route with realms 3/4 should have been deleted instead. Explicitly check for fc_flow passed in the FIB configuration (this comes from RTA_FLOW extracted by rtm_to_fib_config()) and fail matching if it differs from nh_tclassid. The handling of RTA_FLOW for multipath routes later in fib_nh_match() is still needed, as we can have multiple RTA_FLOW attributes that need to be matched against the tclassid of each next hop. v2: Check that fc_flow is set before discarding the match, so that the user can still select the first matching rule by not specifying any realm, as suggested by David Ahern. Reported-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 1b12580a ] Now br_sysfs_if file flush doesn't have attr show. To read it will cause kernel panic after users chmod u+r this file. Xiong found this issue when running the commands: ip link add br0 type bridge ip link add type veth ip link set veth0 master br0 chmod u+r /sys/devices/virtual/net/veth0/brport/flush timeout 3 cat /sys/devices/virtual/net/veth0/brport/flush kernel crashed with NULL a pointer dereference call trace. This patch is to fix it by return -EINVAL when brport_attr->show is null, just the same as the check for brport_attr->store in brport_store(). Fixes: 9cf63747 ("bridge: add sysfs hook to flush forwarding table") Reported-by:
Xiong Zhou <xzhou@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Thomas Gleixner authored
commit 945fd17a upstream. The separation of the cpu_entry_area from the fixmap missed the fact that on 32bit non-PAE kernels the cpu_entry_area mapping might not be covered in initial_page_table by the previous synchronizations. This results in suspend/resume failures because 32bit utilizes initial page table for resume. The absence of the cpu_entry_area mapping results in a triple fault, aka. insta reboot. With PAE enabled this works by chance because the PGD entry which covers the fixmap and other parts incindentally provides the cpu_entry_area mapping as well. Synchronize the initial page table after setting up the cpu entry area. Instead of adding yet another copy of the same code, move it to a function and invoke it from the various places. It needs to be investigated if the existing calls in setup_arch() and setup_per_cpu_areas() can be replaced by the later invocation from setup_cpu_entry_areas(), but that's beyond the scope of this fix. Fixes: 92a0f81d ("x86/cpu_entry_area: Move it out of the fixmap") Reported-by:
Woody Suwalski <terraluna977@gmail.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
-
Sebastian Panceac authored
commit 028091f8 upstream. When the Intel Edison module is powered with 3.3V, the reboot command makes the module stuck. If the module is powered at a greater voltage, like 4.4V (as the Edison Mini Breakout board does), reboot works OK. The official Intel Edison BSP sends the IPCMSG_COLD_RESET message to the SCU by default. The IPCMSG_COLD_BOOT which is used by the upstream kernel is only sent when explicitely selected on the kernel command line. Use IPCMSG_COLD_RESET unconditionally which makes reboot work independent of the power supply voltage. [ tglx: Massaged changelog ] Fixes: bda7b072 ("x86/platform/intel-mid: Implement power off sequence") Signed-off-by:
Sebastian Panceac <sebastian@resin.io> Signed-off-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1519810849-15131-1-git-send-email-sebastian@resin.ioSigned-off-by:
-
Juergen Gross authored
commit 71c208dd upstream. Older Xen versions (4.5 and before) might have problems migrating pv guests with MSR_IA32_SPEC_CTRL having a non-zero value. So before suspending zero that MSR and restore it after being resumed. Signed-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
Jan Beulich <jbeulich@suse.com> Cc: stable@vger.kernel.org Cc: xen-devel@lists.xenproject.org Cc: boris.ostrovsky@oracle.com Link: https://lkml.kernel.org/r/20180226140818.4849-1-jgross@suse.comSigned-off-by:
-
Jan Kara authored
commit d9c10e5b upstream. Commit e864f395 "fs: add RWF_DSYNC aand RWF_SYNC" added additional way for direct IO to become synchronous and thus trigger fsync from the IO completion handler. Then commit 9830f4be "fs: Use RWF_* flags for AIO operations" allowed these flags to be set for AIO as well. However that commit forgot to update the condition checking whether the IO completion handling should be defered to a workqueue and thus AIO DIO with RWF_[D]SYNC set will call fsync() from IRQ context resulting in sleep in atomic. Fix the problem by checking directly iocb flags (the same way as it is done in dio_complete()) instead of checking all conditions that could lead to IO being synchronous. CC: Christoph Hellwig <hch@lst.de> CC: Goldwyn Rodrigues <rgoldwyn@suse.com> CC: stable@vger.kernel.org Reported-by:
Mark Rutland <mark.rutland@arm.com> Tested-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Dan Williams authored
commit 230f5a89 upstream. Gerd reports that ->i_mode may contain other bits besides S_IFCHR. Use S_ISCHR() instead. Otherwise, get_user_pages_longterm() may fail on device-dax instances when those are meant to be explicitly allowed. Fixes: 2bb6d283 ("mm: introduce get_user_pages_longterm") Cc: <stable@vger.kernel.org> Reported-by:
Gerd Rausch <gerd.rausch@oracle.com> Acked-by:
Jane Chu <jane.chu@oracle.com> Reported-by:
Haozhong Zhang <haozhong.zhang@intel.com> Reviewed-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Viresh Kumar authored
commit 0373ca74 upstream. commit a307a1e6 "cpufreq: s3c: use cpufreq_generic_init()" accidentally broke cpufreq on s3c2410 and s3c2412. These two platforms don't have a CPU frequency table and used to skip calling cpufreq_table_validate_and_show() for them. But with the above commit, we started calling it unconditionally and that will eventually fail as the frequency table pointer is NULL. Fix this by calling cpufreq_table_validate_and_show() conditionally again. Fixes: a307a1e6 "cpufreq: s3c: use cpufreq_generic_init()" Cc: 3.13+ <stable@vger.kernel.org> # v3.13+ Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Dan Williams authored
commit 94db151d upstream. Filesystem-DAX is incompatible with 'longterm' page pinning. Without page cache indirection a DAX mapping maps filesystem blocks directly. This means that the filesystem must not modify a file's block map while any page in a mapping is pinned. In order to prevent the situation of userspace holding of filesystem operations indefinitely, disallow 'longterm' Filesystem-DAX mappings. RDMA has the same conflict and the plan there is to add a 'with lease' mechanism to allow the kernel to notify userspace that the mapping is being torn down for block-map maintenance. Perhaps something similar can be put in place for vfio. Note that xfs and ext4 still report: "DAX enabled. Warning: EXPERIMENTAL, use at your own risk" ...at mount time, and resolving the dax-dma-vs-truncate problem is one of the last hurdles to remove that designation. Acked-by:
Alex Williamson <alex.williamson@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: kvm@vger.kernel.org Cc: <stable@vger.kernel.org> Reported-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Ming Lei authored
commit ba989a01 upstream. When requeuing request, the domain token should have been freed before re-inserting the request to io scheduler. Otherwise, the assigned domain token will be leaked, and IO hang can be caused. Cc: Paolo Valente <paolo.valente@linaro.org> Cc: Omar Sandoval <osandov@fb.com> Cc: stable@vger.kernel.org Reviewed-by:
Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
-
Jiufei Xue authored
commit 7c5a0dcf upstream. The vm counters is counted in sectors, so we should do the conversation in submit_bio. Fixes: 74d46992 ("block: replace bi_bdev with a gendisk pointer and partitions index") Cc: stable@vger.kernel.org Reviewed-by:
Omar Sandoval <osandov@fb.com> Reviewed-by:
Jiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by:
-
Anand Jain authored
commit 3c181c12 upstream. The fs_info::super_copy is a byte copy of the on-disk structure and all members must use the accessor macros/functions to obtain the right value. This was missing in update_super_roots and in sysfs readers. Moving between opposite endianness hosts will report bogus numbers in sysfs, and mount may fail as the root will not be restored correctly. If the filesystem is always used on a same endian host, this will not be a problem. Fix this by using the btrfs_set_super...() functions to set fs_info::super_copy values, and for the sysfs, use the cached fs_info::nodesize/sectorsize values. CC: stable@vger.kernel.org Fixes: df93589a ("btrfs: export more from FS_INFO to sysfs") Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
Liu Bo <bo.li.liu@oracle.com> Reviewed-by:
David Sterba <dsterba@suse.com> [ update changelog ] Signed-off-by:
-
John David Anglin authored
commit 0adb24e0 upstream. The change to flush_kernel_vmap_range() wasn't sufficient to avoid the SMP stalls. The problem is some drivers call these routines with interrupts disabled. Interrupts need to be enabled for flush_tlb_all() and flush_cache_all() to work. This version adds checks to ensure interrupts are not disabled before calling routines that need IPI interrupts. When interrupts are disabled, we now drop into slower code. The attached change fixes the ordering of cache and TLB flushes in several cases. When we flush the cache using the existing PTE/TLB entries, we need to flush the TLB after doing the cache flush. We don't need to do this when we flush the entire instruction and data caches as these flushes don't use the existing TLB entries. The same is true for tmpalias region flushes. The flush_kernel_vmap_range() and invalidate_kernel_vmap_range() routines have been updated. Secondly, we added a new purge_kernel_dcache_range_asm() routine to pacache.S and use it in invalidate_kernel_vmap_range(). Nominally, purges are faster than flushes as the cache lines don't have to be written back to memory. Hopefully, this is sufficient to resolve the remaining problems due to cache speculation. So far, testing indicates that this is the case. I did work up a patch using tmpalias flushes, but there is a performance hit because we need the physical address for each page, and we also need to sequence access to the tmpalias flush code. This increases the probability of stalls. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # 4.9+ Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Helge Deller authored
commit 636a415b upstream. When run under QEMU, calling mfctl(16) creates some overhead because the qemu timer has to be scaled and moved into the register. This patch reduces the number of calls to mfctl(16) by moving the calls out of the loops. Additionally, increase the minimal time interval to 8000 cycles instead of 500 to compensate possible QEMU delays when delivering interrupts. Signed-off-by:
-
Helge Deller authored
commit 5ffa8518 upstream. When running on qemu we know that the (emulated) cr16 cpu-internal clocks are syncronized. So let's use them unconditionally on qemu. Signed-off-by:
-
Lingutla Chandrasekhar authored
commit c52232a4 upstream. On CPU hotunplug the enqueued timers of the unplugged CPU are migrated to a live CPU. This happens from the control thread which initiated the unplug. If the CPU on which the control thread runs came out from a longer idle period then the base clock of that CPU might be stale because the control thread runs prior to any event which forwards the clock. In such a case the timers from the unplugged CPU are queued on the live CPU based on the stale clock which can cause large delays due to increased granularity of the outer timer wheels which are far away from base:;clock. But there is a worse problem than that. The following sequence of events illustrates it: - CPU0 timer1 is queued expires = 59969 and base->clk = 59131. The timer is queued at wheel level 2, with resulting expiry time = 60032 (due to level granularity). - CPU1 enters idle @60007, with next timer expiry @60020. - CPU0 is hotplugged at @60009 - CPU1 exits idle and runs the control thread which migrates the timers from CPU0 timer1 is now queued in level 0 for immediate handling in the next softirq because the requested expiry time 59969 is before CPU1 base->clk 60007 - CPU1 runs code which forwards the base clock which succeeds because the next expiring timer. which was collected at idle entry time is still set to 60020. So it forwards beyond 60007 and therefore misses to expire the migrated timer1. That timer gets expired when the wheel wraps around again, which takes between 63 and 630ms depending on the HZ setting. Address both problems by invoking forward_timer_base() for the control CPUs timer base. All other places, which might run into a similar problem (mod_timer()/add_timer_on()) already invoke forward_timer_base() to avoid that. [ tglx: Massaged comment and changelog ] Fixes: a683f390 ("timers: Forward the wheel clock whenever possible") Co-developed-by:
Neeraj Upadhyay <neeraju@codeaurora.org> Signed-off-by:
Lingutla Chandrasekhar <clingutla@codeaurora.org> Signed-off-by:
-
Shawn Lin authored
commit 0d84b9e5 upstream. Add num_caps field for dw_mci_drv_data to validate the controller id from DT alias and non-DT ways. Reported-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Shawn Lin <shawn.lin@rock-chips.com> Fixes: 800d78bf ("mmc: dw_mmc: add support for implementation specific callbacks") Cc: <stable@vger.kernel.org> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Shawn Lin authored
commit a4faa492 upstream. Factor out dw_mci_init_slot_caps to consolidate parsing all differents types of capabilities from host contrllers. No functional change intended. Signed-off-by:
-
