- 11 Jul, 2018 40 commits
-
-
Tokunori Ikegami authored
commit 79ca484b upstream. Currently the functions use to check both chip ready and good. But the chip ready is not enough to check the operation status. So change this to check the chip good instead of this. About the retry functions to make sure the error handling remain it. Signed-off-by:
Tokunori Ikegami <ikegami@allied-telesis.co.jp> Reviewed-by:
Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Brian Norris <computersforpeace@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr> Cc: linux-mtd@lists.infradead.org Cc: stable@vger.kernel.org Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tokunori Ikegami authored
commit 45f75b8a upstream. For the word write functions it is retried for error. But it is not implemented to retry for the erase functions. To make sure for the erase functions change to retry as same. This is needed to prevent the flash erase error caused only once. It was caused by the error case of chip_good() in the do_erase_oneblock(). Also it was confirmed on the MACRONIX flash device MX29GL512FHT2I-11G. But the error issue behavior is not able to reproduce at this moment. The flash controller is parallel Flash interface integrated on BCM53003. Signed-off-by:
-
Tokunori Ikegami authored
commit 85a82e28 upstream. The definition can be used for other program and erase operations also. So change the naming to MAX_RETRIES from MAX_WORD_RETRIES. Signed-off-by:
-
Mikulas Patocka authored
commit d12067f4 upstream. dm_bufio_shrink_count() is called from do_shrink_slab to find out how many freeable objects are there. The reported value doesn't have to be precise, so we don't need to take the dm-bufio lock. Suggested-by:
David Rientjes <rientjes@google.com> Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Martin Kaiser authored
commit 3f77f244 upstream. The v21 version of the NAND flash controller contains a Spare Area Size Register (SPAS) at offset 0x10. Its setting defaults to the maximum spare area size of 218 bytes. The size that is set in this register is used by the controller when it calculates the ECC bytes internally in hardware. Usually, this register is updated from settings in the IIM fuses when the system is booting from NAND flash. For other boot media, however, the SPAS register remains at the default setting, which may not work for the particular flash chip on the board. The same goes for flash chips whose configuration cannot be set in the IIM fuses (e.g. chips with 2k sector size and 128 bytes spare area size can't be configured in the IIM fuses on imx25 systems). Set the SPAS register explicitly during the preset operation. Derive the register value from mtd->oobsize that was detected during probe by decoding the flash chip's ID bytes. While at it, rename the define for the spare area register's offset to NFC_V21_RSLTSPARE_AREA. The register at offset 0x10 on v1 controllers is different from the register on v21 controllers. Fixes: d4840180 ("mtd: mxc_nand: set NFC registers after reset") Cc: stable@vger.kernel.org Signed-off-by:
Martin Kaiser <martin@kaiser.cx> Reviewed-by:
Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by:
Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by:
-
Mikulas Patocka authored
commit 41c73a49 upstream. If the first allocation attempt using GFP_NOWAIT fails, drop the lock and retry using GFP_NOIO allocation (lock is dropped because the allocation can take some time). Note that we won't do GFP_NOIO allocation when we loop for the second time, because the lock shouldn't be dropped between __wait_for_free_buffer and __get_unclaimed_buffer. Signed-off-by:
-
Douglas Anderson authored
commit 9ea61cac upstream. We've seen in-field reports showing _lots_ (18 in one case, 41 in another) of tasks all sitting there blocked on: mutex_lock+0x4c/0x68 dm_bufio_shrink_count+0x38/0x78 shrink_slab.part.54.constprop.65+0x100/0x464 shrink_zone+0xa8/0x198 In the two cases analyzed, we see one task that looks like this: Workqueue: kverityd verity_prefetch_io __switch_to+0x9c/0xa8 __schedule+0x440/0x6d8 schedule+0x94/0xb4 schedule_timeout+0x204/0x27c schedule_timeout_uninterruptible+0x44/0x50 wait_iff_congested+0x9c/0x1f0 shrink_inactive_list+0x3a0/0x4cc shrink_lruvec+0x418/0x5cc shrink_zone+0x88/0x198 try_to_free_pages+0x51c/0x588 __alloc_pages_nodemask+0x648/0xa88 __get_free_pages+0x34/0x7c alloc_buffer+0xa4/0x144 __bufio_new+0x84/0x278 dm_bufio_prefetch+0x9c/0x154 verity_prefetch_io+0xe8/0x10c process_one_work+0x240/0x424 worker_thread+0x2fc/0x424 kthread+0x10c/0x114 ...and that looks to be the one holding the mutex. The problem has been reproduced on fairly easily: 0. Be running Chrome OS w/ verity enabled on the root filesystem 1. Pick test patch: http://crosreview.com/412360 2. Install launchBalloons.sh and balloon.arm from http://crbug.com/468342 ...that's just a memory stress test app. 3. On a 4GB rk3399 machine, run nice ./launchBalloons.sh 4 900 100000 ...that tries to eat 4 * 900 MB of memory and keep accessing. 4. Login to the Chrome web browser and restore many tabs With that, I've seen printouts like: DOUG: long bufio 90758 ms ...and stack trace always show's we're in dm_bufio_prefetch(). The problem is that we try to allocate memory with GFP_NOIO while we're holding the dm_bufio lock. Instead we should be using GFP_NOWAIT. Using GFP_NOIO can cause us to sleep while holding the lock and that causes the above problems. The current behavior explained by David Rientjes: It will still try reclaim initially because __GFP_WAIT (or __GFP_KSWAPD_RECLAIM) is set by GFP_NOIO. This is the cause of contention on dm_bufio_lock() that the thread holds. You want to pass GFP_NOWAIT instead of GFP_NOIO to alloc_buffer() when holding a mutex that can be contended by a concurrent slab shrinker (if count_objects didn't use a trylock, this pattern would trivially deadlock). This change significantly increases responsiveness of the system while in this state. It makes a real difference because it unblocks kswapd. In the bug report analyzed, kswapd was hung: kswapd0 D ffffffc000204fd8 0 72 2 0x00000000 Call trace: [<ffffffc000204fd8>] __switch_to+0x9c/0xa8 [<ffffffc00090b794>] __schedule+0x440/0x6d8 [<ffffffc00090bac0>] schedule+0x94/0xb4 [<ffffffc00090be44>] schedule_preempt_disabled+0x28/0x44 [<ffffffc00090d900>] __mutex_lock_slowpath+0x120/0x1ac [<ffffffc00090d9d8>] mutex_lock+0x4c/0x68 [<ffffffc000708e7c>] dm_bufio_shrink_count+0x38/0x78 [<ffffffc00030b268>] shrink_slab.part.54.constprop.65+0x100/0x464 [<ffffffc00030dbd8>] shrink_zone+0xa8/0x198 [<ffffffc00030e578>] balance_pgdat+0x328/0x508 [<ffffffc00030eb7c>] kswapd+0x424/0x51c [<ffffffc00023f06c>] kthread+0x10c/0x114 [<ffffffc000203dd0>] ret_from_fork+0x10/0x40 By unblocking kswapd memory pressure should be reduced. Suggested-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
Vlastimil Babka authored
commit 7810e678 upstream. In __alloc_pages_slowpath() we reset zonelist and preferred_zoneref for allocations that can ignore memory policies. The zonelist is obtained from current CPU's node. This is a problem for __GFP_THISNODE allocations that want to allocate on a different node, e.g. because the allocating thread has been migrated to a different CPU. This has been observed to break SLAB in our 4.4-based kernel, because there it relies on __GFP_THISNODE working as intended. If a slab page is put on wrong node's list, then further list manipulations may corrupt the list because page_to_nid() is used to determine which node's list_lock should be locked and thus we may take a wrong lock and race. Current SLAB implementation seems to be immune by luck thanks to commit 511e3a05 ("mm/slab: make cache_grow() handle the page allocated on arbitrary node") but there may be others assuming that __GFP_THISNODE works as promised. We can fix it by simply removing the zonelist reset completely. There is actually no reason to reset it, because memory policies and cpusets don't affect the zonelist choice in the first place. This was different when commit 183f6371 ("mm: ignore mempolicies when using ALLOC_NO_WATERMARK") introduced the code, as mempolicies provided their own restricted zonelists. We might consider this for 4.17 although I don't know if there's anything currently broken. SLAB is currently not affected, but in kernels older than 4.7 that don't yet have 511e3a05 ("mm/slab: make cache_grow() handle the page allocated on arbitrary node") it is. That's at least 4.4 LTS. Older ones I'll have to check. So stable backports should be more important, but will have to be reviewed carefully, as the code went through many changes. BTW I think that also the ac->preferred_zoneref reset is currently useless if we don't also reset ac->nodemask from a mempolicy to NULL first (which we probably should for the OOM victims etc?), but I would leave that for a separate patch. Link: http://lkml.kernel.org/r/20180525130853.13915-1-vbabka@suse.czSigned-off-by:
Vlastimil Babka <vbabka@suse.cz> Fixes: 183f6371 ("mm: ignore mempolicies when using ALLOC_NO_WATERMARK") Acked-by:
Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Brad Love authored
commit 3ee9bc12 upstream. The cx25840 driver currently configures 885, 887, and 888 using default divisors for each chip. This check to see if the cx23885 driver has passed the cx25840 a non-default clock rate for a specific chip. If a cx23885 board has left clk_freq at 0, the clock default values will be used to configure the PLLs. This patch only has effect on 888 boards who set clk_freq to 25M. Signed-off-by:
Brad Love <brad@nextdimension.cc> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Rasmus Villemoes authored
commit 9564a8cf upstream. I tried building using a freshly built Make (4.2.1-69-g8a731d1), but already the objtool build broke with orc_dump.c: In function ‘orc_dump’: orc_dump.c:106:2: error: ‘elf_getshnum’ is deprecated [-Werror=deprecated-declarations] if (elf_getshdrnum(elf, &nr_sections)) { Turns out that with that new Make, the backslash was not removed, so cpp didn't see a #include directive, grep found nothing, and -DLIBELF_USE_DEPRECATED was wrongly put in CFLAGS. Now, that new Make behaviour is documented in their NEWS file: * WARNING: Backward-incompatibility! Number signs (#) appearing inside a macro reference or function invocation no longer introduce comments and should not be escaped with backslashes: thus a call such as: foo := $(shell echo '#') is legal. Previously the number sign needed to be escaped, for example: foo := $(shell echo '\#') Now this latter will resolve to "\#". If you want to write makefiles portable to both versions, assign the number sign to a variable: C := \# foo := $(shell echo '$C') This was claimed to be fixed in 3.81, but wasn't, for some reason. To detect this change search for 'nocomment' in the .FEATURES variable. This also fixes up the two make-cmd instances to replace # with $(pound) rather than with \#. There might very well be other places that need similar fixup in preparation for whatever future Make release contains the above change, but at least this builds an x86_64 defconfig with the new make. Link: https://bugzilla.kernel.org/show_bug.cgi?id=197847 Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Waldemar Rymarkiewicz authored
commit c5c2a97b upstream. This commit fixes a rare but possible case when the clk rate is updated without update of the regulator voltage. At boot up, CPUfreq checks if the system is running at the right freq. This is a sanity check in case a bootloader set clk rate that is outside of freq table present with cpufreq core. In such cases system can be unstable so better to change it to a freq that is preset in freq-table. The CPUfreq takes next freq that is >= policy->cur and this is our target_freq that needs to be set now. dev_pm_opp_set_rate(dev, target_freq) checks the target_freq and the old_freq (a current rate). If these are equal it returns early. If not, it searches for OPP (old_opp) that fits best to old_freq (not listed in the table) and updates old_freq (!). Here, we can end up with old_freq = old_opp.rate = target_freq, which is not handled in _generic_set_opp_regulator(). It's supposed to update voltage only when freq > old_freq || freq > old_freq. if (freq > old_freq) { ret = _set_opp_voltage(dev, reg, new_supply); [...] if (freq < old_freq) { ret = _set_opp_voltage(dev, reg, new_supply); if (ret) It results in, no voltage update while clk rate is updated. Example: freq-table = { 1000MHz 1.15V 666MHZ 1.10V 333MHz 1.05V } boot-up-freq = 800MHz # not listed in freq-table freq = target_freq = 1GHz old_freq = 800Mhz old_opp = _find_freq_ceil(opp_table, &old_freq); #(old_freq is modified!) old_freq = 1GHz Fixes: 6a0712f6 ("PM / OPP: Add dev_pm_opp_set_rate()") Cc: 4.6+ <stable@vger.kernel.org> # v4.6+ Signed-off-by:
Waldemar Rymarkiewicz <waldemar.rymarkiewicz@gmail.com> Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
-
Daniel Rosenberg authored
commit 717adfda upstream. If our length is greater than the size of the buffer, we overflow the buffer Cc: stable@vger.kernel.org Signed-off-by:
Daniel Rosenberg <drosen@google.com> Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Gustavo A. R. Silva authored
commit 4f65245f upstream. uref->field_index, uref->usage_index, finfo.field_index and cinfo.index can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/hid/usbhid/hiddev.c:473 hiddev_ioctl_usage() warn: potential spectre issue 'report->field' (local cap) drivers/hid/usbhid/hiddev.c:477 hiddev_ioctl_usage() warn: potential spectre issue 'field->usage' (local cap) drivers/hid/usbhid/hiddev.c:757 hiddev_ioctl() warn: potential spectre issue 'report->field' (local cap) drivers/hid/usbhid/hiddev.c:801 hiddev_ioctl() warn: potential spectre issue 'hid->collection' (local cap) Fix this by sanitizing such structure fields before using them to index report->field, field->usage and hid->collection Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Jason Andryuk authored
commit ef6eaf27 upstream. Commit ac75a041 ("HID: i2c-hid: fix size check and type usage") started writing messages when the ret_size is <= 2 from i2c_master_recv. However, my device i2c-DLL07D1 returns 2 for a short period of time (~0.5s) after I stop moving the pointing stick or touchpad. It varies, but you get ~50 messages each time which spams the log hard. [ 95.925055] i2c_hid i2c-DLL07D1:01: i2c_hid_get_input: incomplete report (83/2) This has also been observed with a i2c-ALP0017. [ 1781.266353] i2c_hid i2c-ALP0017:00: i2c_hid_get_input: incomplete report (30/2) Only print the message when ret_size is totally invalid and less than 2 to cut down on the log spam. Fixes: ac75a041 ("HID: i2c-hid: fix size check and type usage") Reported-by:
John Smith <john-s-84@gmx.net> Cc: stable@vger.kernel.org Signed-off-by:
Jason Andryuk <jandryuk@gmail.com> Signed-off-by:
-
Ido Schimmel authored
Jiri Slaby noticed that the backport of upstream commit 25cc72a3 ("mlxsw: spectrum: Forbid linking to devices that have uppers") to kernel 4.9.y introduced the same check twice in the same function instead of in two different places. Fix this by relocating one of the checks to its intended place, thus preventing unsupported configurations as described in the original commit. Fixes: 73ee5a73 ("mlxsw: spectrum: Forbid linking to devices that have uppers") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reported-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
Jon Derrick authored
commit a17712c8 upstream. This patch attempts to close a hole leading to a BUG seen with hot removals during writes [1]. A block device (NVME namespace in this test case) is formatted to EXT4 without partitions. It's mounted and write I/O is run to a file, then the device is hot removed from the slot. The superblock attempts to be written to the drive which is no longer present. The typical chain of events leading to the BUG: ext4_commit_super() __sync_dirty_buffer() submit_bh() submit_bh_wbc() BUG_ON(!buffer_mapped(bh)); This fix checks for the superblock's buffer head being mapped prior to syncing. [1] https://www.spinics.net/lists/linux-ext4/msg56527.htmlSigned-off-by:
Jon Derrick <jonathan.derrick@intel.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
-
Theodore Ts'o authored
commit bfe0a5f4 upstream. The kernel's ext4 mount-time checks were more permissive than e2fsprogs's libext2fs checks when opening a file system. The superblock is considered too insane for debugfs or e2fsck to operate on it, the kernel has no business trying to mount it. This will make file system fuzzing tools work harder, but the failure cases that they find will be more useful and be easier to evaluate. Signed-off-by:
-
Theodore Ts'o authored
commit c37e9e01 upstream. If there is a directory entry pointing to a system inode (such as a journal inode), complain and declare the file system to be corrupted. Also, if the superblock's first inode number field is too small, refuse to mount the file system. This addresses CVE-2018-10882. https://bugzilla.kernel.org/show_bug.cgi?id=200069Signed-off-by:
-
Theodore Ts'o authored
commit 6e8ab72a upstream. When converting from an inode from storing the data in-line to a data block, ext4_destroy_inline_data_nolock() was only clearing the on-disk copy of the i_blocks[] array. It was not clearing copy of the i_blocks[] in ext4_inode_info, in i_data[], which is the copy actually used by ext4_map_blocks(). This didn't matter much if we are using extents, since the extents header would be invalid and thus the extents could would re-initialize the extents tree. But if we are using indirect blocks, the previous contents of the i_blocks array will be treated as block numbers, with potentially catastrophic results to the file system integrity and/or user data. This gets worse if the file system is using a 1k block size and s_first_data is zero, but even without this, the file system can get quite badly corrupted. This addresses CVE-2018-10881. https://bugzilla.kernel.org/show_bug.cgi?id=200015Signed-off-by:
-
Theodore Ts'o authored
commit bdbd6ce0 upstream. Signed-off-by:
-
Theodore Ts'o authored
commit bc890a60 upstream. If there is a corupted file system where the claimed depth of the extent tree is -1, this can cause a massive buffer overrun leading to sadness. This addresses CVE-2018-10877. https://bugzilla.kernel.org/show_bug.cgi?id=199417Signed-off-by:
-
Theodore Ts'o authored
commit 8844618d upstream. The bg_flags field in the block group descripts is only valid if the uninit_bg or metadata_csum feature is enabled. We were not consistently looking at this field; fix this. Also block group #0 must never have uninitialized allocation bitmaps, or need to be zeroed, since that's where the root inode, and other special inodes are set up. Check for these conditions and mark the file system as corrupted if they are detected. This addresses CVE-2018-10876. https://bugzilla.kernel.org/show_bug.cgi?id=199403Signed-off-by:
-
Theodore Ts'o authored
commit 819b23f1 upstream. Regardless of whether the flex_bg feature is set, we should always check to make sure the bits we are setting in the block bitmap are within the block group bounds. https://bugzilla.kernel.org/show_bug.cgi?id=199865Signed-off-by:
-
Theodore Ts'o authored
commit 77260807 upstream. It's really bad when the allocation bitmaps and the inode table overlap with the block group descriptors, since it causes random corruption of the bg descriptors. So we really want to head those off at the pass. https://bugzilla.kernel.org/show_bug.cgi?id=199865Signed-off-by:
-
Theodore Ts'o authored
commit e09463f2 upstream. Do not set the b_modified flag in block's journal head should not until after we're sure that jbd2_journal_dirty_metadat() will not abort with an error due to there not being enough space reserved in the jbd2 handle. Otherwise, future attempts to modify the buffer may lead a large number of spurious errors and warnings. This addresses CVE-2018-10883. https://bugzilla.kernel.org/show_bug.cgi?id=200071Signed-off-by:
-
Mikulas Patocka authored
commit 99ec9e77 upstream. The displaylink hardware has such a peculiarity that it doesn't render a command until next command is received. This produces occasional corruption, such as when setting 22x11 font on the console, only the first line of the cursor will be blinking if the cursor is located at some specific columns. When we end up with a repeating pixel, the driver has a bug that it leaves one uninitialized byte after the command (and this byte is enough to flush the command and render it - thus it fixes the screen corruption), however whe we end up with a non-repeating pixel, there is no byte appended and this results in temporary screen corruption. This patch fixes the screen corruption by always appending a byte 0xAF at the end of URB. It also removes the uninitialized byte. Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Paulo Alcantara authored
commit 7ffbe655 upstream. For every request we send, whether it is SMB1 or SMB2+, we attempt to reconnect tcon (cifs_reconnect_tcon or smb2_reconnect) before carrying out the request. So, while server->tcpStatus != CifsNeedReconnect, we wait for the reconnection to succeed on wait_event_interruptible_timeout(). If it returns, that means that either the condition was evaluated to true, or timeout elapsed, or it was interrupted by a signal. Since we're not handling the case where the process woke up due to a received signal (-ERESTARTSYS), the next call to wait_event_interruptible_timeout() will _always_ fail and we end up looping forever inside either cifs_reconnect_tcon() or smb2_reconnect(). Here's an example of how to trigger that: $ mount.cifs //foo/share /mnt/test -o username=foo,password=foo,vers=1.0,hard (break connection to server before executing bellow cmd) $ stat -f /mnt/test & sleep 140 [1] 2511 $ ps -aux -q 2511 USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 2511 0.0 0.0 12892 1008 pts/0 S 12:24 0:00 stat -f /mnt/test $ kill -9 2511 (wait for a while; process is stuck in the kernel) $ ps -aux -q 2511 USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 2511 83.2 0.0 12892 1008 pts/0 R 12:24 30:01 stat -f /mnt/test By using 'hard' mount point means that cifs.ko will keep retrying indefinitely, however we must allow the process to be killed otherwise it would hang the system. Signed-off-by:
Paulo Alcantara <palcantara@suse.de> Cc: stable@vger.kernel.org Reviewed-by:
Aurelien Aptel <aaptel@suse.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
Lars Ellenberg authored
commit 64dafbc9 upstream. We have struct drbd_requests { ... struct bio *private_bio; ... } to hold a bio clone for local submission. On local IO completion, we put that bio, and in case we want to use the result later, we overload that member to hold the ERR_PTR() of the completion result, Which, before v4.3, used to be the passed in "int error", so we could first bio_put(), then assign. v4.3-rc1~100^2~21 4246a0b6 block: add a bi_error field to struct bio changed that: bio_put(req->private_bio); - req->private_bio = ERR_PTR(error); + req->private_bio = ERR_PTR(bio->bi_error); Which introduces an access after free, because it was non obvious that req->private_bio == bio. Impact of that was mostly unnoticable, because we only use that value in a multiple-failure case, and even then map any "unexpected" error code to EIO, so worst case we could potentially mask a more specific error with EIO in a multiple failure case. Unless the pointed to memory region was unmapped, as is the case with CONFIG_DEBUG_PAGEALLOC, in which case this results in BUG: unable to handle kernel paging request v4.13-rc1~70^2~75 4e4cbee9 block: switch bios to blk_status_t changes it further to bio_put(req->private_bio); req->private_bio = ERR_PTR(blk_status_to_errno(bio->bi_status)); And blk_status_to_errno() now contains a WARN_ON_ONCE() for unexpected values, which catches this "sometimes", if the memory has been reused quickly enough for other things. Should also go into stable since 4.3, with the trivial change around 4.13. Cc: stable@vger.kernel.org Fixes: 4246a0b6 block: add a bi_error field to struct bio Reported-by:
Sarah Newman <srn@prgmr.com> Signed-off-by:
Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Christian Borntraeger authored
commit 891f6a72 upstream. In the critical section cleanup we must not mess with r1. For march=z9 or older, larl + ex (instead of exrl) are used with r1 as a temporary register. This can clobber r1 in several interrupt handlers. Fix this by using r11 as a temp register. r11 is being saved by all callers of cleanup_critical. Fixes: 6dd85fbb ("s390: move expoline assembler macros to a header") Cc: stable@vger.kernel.org #v4.16 Reported-by:
Oliver Kurz <okurz@suse.com> Reported-by:
Petr Tesařík <ptesarik@suse.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by:
Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Jann Horn authored
commit 26b5b874 upstream. As Al Viro noted in commit 128394ef ("sg_write()/bsg_write() is not fit to be called under KERNEL_DS"), sg improperly accesses userspace memory outside the provided buffer, permitting kernel memory corruption via splice(). But it doesn't just do it on ->write(), also on ->read(). As a band-aid, make sure that the ->read() and ->write() handlers can not be called in weird contexts (kernel context or credentials different from file opener), like for ib_safe_file_access(). If someone needs to use these interfaces from different security contexts, a new interface should be written that goes through the ->ioctl() handler. I've mostly copypasted ib_safe_file_access() over as sg_safe_file_access() because I couldn't find a good common header - please tell me if you know a better way. [mkp: s/_safe_/_check_/] Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: <stable@vger.kernel.org> Signed-off-by:
Jann Horn <jannh@google.com> Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Changbin Du authored
commit 1fe4293f upstream. The function_graph tracer does not show the interrupt return marker for the leaf entry. On leaf entries, we see an unbalanced interrupt marker (the interrupt was entered, but nevern left). Before: 1) | SyS_write() { 1) | __fdget_pos() { 1) 0.061 us | __fget_light(); 1) 0.289 us | } 1) | vfs_write() { 1) 0.049 us | rw_verify_area(); 1) + 15.424 us | __vfs_write(); 1) ==========> | 1) 6.003 us | smp_apic_timer_interrupt(); 1) 0.055 us | __fsnotify_parent(); 1) 0.073 us | fsnotify(); 1) + 23.665 us | } 1) + 24.501 us | } After: 0) | SyS_write() { 0) | __fdget_pos() { 0) 0.052 us | __fget_light(); 0) 0.328 us | } 0) | vfs_write() { 0) 0.057 us | rw_verify_area(); 0) | __vfs_write() { 0) ==========> | 0) 8.548 us | smp_apic_timer_interrupt(); 0) <========== | 0) + 36.507 us | } /* __vfs_write */ 0) 0.049 us | __fsnotify_parent(); 0) 0.066 us | fsnotify(); 0) + 50.064 us | } 0) + 50.952 us | } Link: http://lkml.kernel.org/r/1517413729-20411-1-git-send-email-changbin.du@intel.com Cc: stable@vger.kernel.org Fixes: f8b755ac ("tracing/function-graph-tracer: Output arrows signal on hardirq call/return") Signed-off-by:
Changbin Du <changbin.du@intel.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Cannon Matthews authored
commit 520495fe upstream. When booting with very large numbers of gigantic (i.e. 1G) pages, the operations in the loop of gather_bootmem_prealloc, and specifically prep_compound_gigantic_page, takes a very long time, and can cause a softlockup if enough pages are requested at boot. For example booting with 3844 1G pages requires prepping (set_compound_head, init the count) over 1 billion 4K tail pages, which takes considerable time. Add a cond_resched() to the outer loop in gather_bootmem_prealloc() to prevent this lockup. Tested: Booted with softlockup_panic=1 hugepagesz=1G hugepages=3844 and no softlockup is reported, and the hugepages are reported as successfully setup. Link: http://lkml.kernel.org/r/20180627214447.260804-1-cannonmatthews@google.comSigned-off-by:
Cannon Matthews <cannonmatthews@google.com> Reviewed-by:
Mike Kravetz <mike.kravetz@oracle.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Andy Lutomirski authored
commit 60d34501 upstream. Calling get_cpu_cap() will reset a bunch of CPU features. This will cause the system to lose track of force-set and force-cleared features in the words that are reset until the end of CPU initialization. This can cause X86_FEATURE_FPU, for example, to change back and forth during boot and potentially confuse CPU setup. To minimize the chance of confusion, re-apply forced caps every time get_cpu_cap() is called. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Reviewed-by:
Borislav Petkov <bp@suse.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Whitehead <tedheadster@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yu-cheng Yu <yu-cheng.yu@intel.com> Link: http://lkml.kernel.org/r/c817eb373d2c67c2c81413a70fc9b845fa34a37e.1484705016.git.luto@kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Juergen Gross authored
commit 74899d92 upstream. Commit: 1f50ddb4 ("x86/speculation: Handle HT correctly on AMD") ... added speculative_store_bypass_ht_init() to the per-CPU initialization sequence. speculative_store_bypass_ht_init() needs to be called on each CPU for PV guests, too. Reported-by:
Brian Woods <brian.woods@amd.com> Tested-by:
Juergen Gross <jgross@suse.com> Cc: <stable@vger.kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: boris.ostrovsky@oracle.com Cc: xen-devel@lists.xenproject.org Fixes: 1f50ddb4 ("x86/speculation: Handle HT correctly on AMD") Link: https://lore.kernel.org/lkml/20180621084331.21228-1-jgross@suse.comSigned-off-by:
-
Mike Marciniszyn authored
commit 1bc0299d upstream. The following code fails to allocate a buffer for the tail address that the hardware DMAs into when the user context DMA_RTAIL is set. if (HFI1_CAP_KGET_MASK(rcd->flags, DMA_RTAIL)) { rcd->rcvhdrtail_kvaddr = dma_zalloc_coherent( &dd->pcidev->dev, PAGE_SIZE, &dma_hdrqtail, gfp_flags); if (!rcd->rcvhdrtail_kvaddr) goto bail_free; rcd->rcvhdrqtailaddr_dma = dma_hdrqtail; } So the rcvhdrtail_kvaddr would then be NULL. The mmap logic fails to check for a NULL rcvhdrtail_kvaddr. The fix is to test for both user and kernel DMA_TAIL options during the allocation as well as testing for a NULL rcvhdrtail_kvaddr during the mmap processing. Additionally, all downstream testing of the capmask for DMA_RTAIL have been eliminated in favor of testing rcvhdrtail_kvaddr. Cc: <stable@vger.kernel.org> # 4.9.x Reviewed-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Sean Nyekjaer authored
commit df07101e upstream. According to the reference manual the shp_2_mcu / mcu_2_shp scripts must be used for devices connected through the SPBA. This fixes an issue we saw with DMA transfers. Sometimes the SPI controller RX FIFO was not empty after a DMA transfer and the driver got stuck in the next PIO transfer when it read one word more than expected. commit dd4b487b ("ARM: dts: imx6: Use correct SDMA script for SPI cores") is fixing the same issue but only for SPI1 - 4. Fixes: 67794025 ("ARM: dts: imx6q: enable dma for ecspi5") Signed-off-by:
Sean Nyekjaer <sean.nyekjaer@prevas.dk> Reviewed-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Grygorii Strashko authored
commit bfe72442 upstream. Now the command: ethtool --phy-statistics eth0 will cause system crash with meassage "Unable to handle kernel NULL pointer dereference at virtual address 00000010" from: (kszphy_get_stats) from [<c069f1d8>] (ethtool_get_phy_stats+0xd8/0x210) (ethtool_get_phy_stats) from [<c06a0738>] (dev_ethtool+0x5b8/0x228c) (dev_ethtool) from [<c06b5484>] (dev_ioctl+0x3fc/0x964) (dev_ioctl) from [<c0679f7c>] (sock_ioctl+0x170/0x2c0) (sock_ioctl) from [<c02419d4>] (do_vfs_ioctl+0xa8/0x95c) (do_vfs_ioctl) from [<c02422c4>] (SyS_ioctl+0x3c/0x64) (SyS_ioctl) from [<c0107d60>] (ret_fast_syscall+0x0/0x44) The reason: phy_driver structure for KSZ9031 phy has no .probe() callback defined. As result, struct phy_device *phydev->priv pointer will not be initializes (null). This issue will affect also following phys: KSZ8795, KSZ886X, KSZ8873MLL, KSZ9031, KSZ9021, KSZ8061, KS8737 Fix it by: - adding .probe() = kszphy_probe() callback to KSZ9031, KSZ9021 phys. The kszphy_probe() can be re-used as it doesn't do any phy specific settings. - removing statistic callbacks from other phys (KSZ8795, KSZ886X, KSZ8873MLL, KSZ8061, KS8737) as they doesn't have corresponding statistic counters. Fixes: 2b2427d0 ("phy: micrel: Add ethtool statistics counters") Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Dan Rue <dan.rue@linaro.org> Signed-off-by:
-
David S. Miller authored
commit f4eb17e1 upstream. This reverts commit b699d003. As per Eric Dumazet, the pskb_may_pull() is a NOP in this particular case, so the 'iph' reload is unnecessary. Signed-off-by:
-
Taehee Yoo authored
commit adc972c5 upstream. When depth of chain is bigger than NFT_JUMP_STACK_SIZE, the nft_do_chain crashes. But there is no need to crash hard here. Suggested-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Acked-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Masami Hiramatsu authored
commit 804dec5b upstream. Do not modify singlestep execution buffer (kprobe.ainsn.insn) while resuming from single-stepping, instead, modifies the buffer to add a jump back instruction at preparing buffer. Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David S . Miller <davem@davemloft.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ye Xiaolong <xiaolong.ye@intel.com> Link: http://lkml.kernel.org/r/149076361560.22469.1610155860343077495.stgit@devboxSigned-off-by:
Alexey Makhalov <amakhalov@vmware.com> Signed-off-by:
-
