Merge tag 'asoc-fix-v5.13-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.13

A collection of fixes and device ID updates that have come up in the
past few -rcs, none of which stand out particularly.

The HP ZBook Power G8 using ALC236 codec which using 0x02 to
control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210608114750.32009-1-jeremy.szu@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

There are 2 issues on this machine, the 1st one is mic's plug/unplug
can't be detected, that is because the mic is set to manual detecting
mode, need to apply ALC255_FIXUP_XIAOMI_HEADSET_MIC to set it to auto
detecting mode. The other one is headphone's plug/unplug can't be
detected by pulseaudio, that is because the pulseaudio will use
ucm2/sof-hda-dsp on this machine, and the ucm2 only handle
'Headphone Jack', but on this machine the headphone's pincfg sets the
location to Front, then the alsa mixer name is "Front Headphone Jack"
instead of "Headphone Jack", so override the pincfg to change location
to Left.

BugLink: http://bugs.launchpad.net/bugs/1930188
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210608024600.6198-1-hui.wang@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

This patch fixes PoP noise of around 15ms observed during audio
capture begin.
Enables BCLK and LRCLK in snd_soc_dai_ops prepare call for
introducing some delay before capture start.

(am from https://patchwork.kernel.org/patch/12276369/)
(also found at https://lore.kernel.org/r/20210524142114.18676-1-srivasam@codeaurora.org)
Co-developed-by: Judy Hsiao <judyhsiao@chromium.org>
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210604154545.1198337-1-judyhsiao@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>

In the workqueue to queue wake-up event, isochronous context is not
processed, thus it's useless to check context for the workqueue to switch
status of runtime for PCM substream to XRUN. On the other hand, in
software IRQ context of 1394 OHCI, it's needed.

This commit fixes the bug introduced when tasklet was replaced with
workqueue.

Cc: <stable@vger.kernel.org>
Fixes: 2b3d2987 ("ALSA: firewire: Replace tasklet with work")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210605091054.68866-1-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>

The HP EliteBook 840 Aero G8 using ALC285 codec which using 0x04 to
control mute LED and 0x01 to control micmute LED.
In the other hand, there is no output from right channel of speaker.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210605082539.41797-3-jeremy.szu@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The HP EliteBook x360 1040 G8 using ALC285 codec which using 0x04 to control
mute LED and 0x01 to control micmute LED.
In the other hand, there is no output from right channel of speaker.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210605082539.41797-2-jeremy.szu@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The HP Elite Dragonfly G2 using ALC285 codec which using 0x04 to control
mute LED and 0x01 to control micmute LED.
In the other hand, there is no output from right channel of speaker.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210605082539.41797-1-jeremy.szu@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Based on ("5a15cd7f"), the setting also
should be set in soundwire mode.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/20210604063150.29925-1-oder_chiou@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

TAS2562_TDM_CFG0_SAMPRATE_MASK starts at bit 1, not 0.
So all values need to be left shifted by 1.
Signed-off-by: Richard Weinberger <richard@nod.at>
Link: https://lore.kernel.org/r/20210530203446.19022-1-richard@nod.atSigned-off-by: Mark Brown <broonie@kernel.org>

There is a fair amount of warnings when running 'make dtbs_check' with
amlogic,gx-sound-card.yaml.

Ex:
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dt.yaml: sound: dai-link-0:sound-dai:0:1: missing phandle tag in 0
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dt.yaml: sound: dai-link-0:sound-dai:0:2: missing phandle tag in 0
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dt.yaml: sound: dai-link-0:sound-dai:0: [66, 0, 0] is too long

The reason is that the sound-dai phandle provided has cells, and in such
case the schema should use 'phandle-array' instead of 'phandle'.

Fixes: fd00366b ("ASoC: meson: gx: add sound card dt-binding documentation")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210524093448.357140-1-jbrunet@baylibre.comSigned-off-by: Mark Brown <broonie@kernel.org>

Unfortunately the previous patch to fix issues using the AMD ACP bridge
has the side effect of breaking the dmic in other cases and needs to be
reverted.

Removing the changes while we revisit the fix and find something better.
Apologies for the churn.
Suggested-by: Gabriel Craciunescu <unix.or.die@gmail.com>
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20210602171251.3243-1-markpearson@lenovo.comSigned-off-by: Mark Brown <broonie@kernel.org>

The patch_realtek.c needs to check if the power_state.event equals
PM_EVENT_SUSPEND, after using the direct-complete, the suspend() and
resume() will be skipped if the codec is already rt_suspended, in this
case, the patch_realtek.c will always get PM_EVENT_ON even the system
is really resumed from S3.

We could set power_state to PMSG_SUSPEND in the prepare(), if other
PM functions are called before complete(), those functions will
override power_state; if no other PM functions are called before
complete(), we could know the suspend() and resume() are skipped since
only S3 pm functions could be skipped by direct-complete, in this case
set power_state to PMSG_RESUME in the complete(). This could guarantee
the first time of calling hda_codec_runtime_resume() after complete()
has the correct power_state.

Fixes: 215a22ed ("ALSA: hda: Refactor codec PM to use direct-complete optimization")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210602145424.3132-1-hui.wang@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

snd_timer_notify1() calls the notification to each slave for a master
event, but it passes a wrong event number.  It should be +10 offset,
corresponding to SNDRV_TIMER_EVENT_MXXX, but it's incorrectly with
+100 offset.  Casually this was spotted by UBSAN check via syzkaller.

Reported-by: syzbot+d102fa5b35335a7e544e@syzkaller.appspotmail.com
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/000000000000e5560e05c3bd1d63@google.com
Link: https://lore.kernel.org/r/20210602113823.23777-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

More laptops identified where the AMD ACP bridge needs to be blocked
or the microphone will not work when connected to HDMI.

Use DMI to block the microphone PCM device for these platforms.
Suggested-by: Gabriel Craciunescu <nix.or.die@gmail.com>
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20210531145502.6079-1-markpearson@lenovo.comSigned-off-by: Mark Brown <broonie@kernel.org>

The snd_ctl_led_sysfs_add and snd_ctl_led_sysfs_remove should contain
the refcount operations in pair. However, snd_ctl_led_sysfs_remove fails
to decrease the refcount to zero, which causes device_release never to
be invoked. This leads to memory leak to some resources, like struct
device_private. In addition, we also free some other similar memory
leaks in snd_ctl_led_init/snd_ctl_led_exit.

Fix this by replacing device_del to device_unregister
in snd_ctl_led_sysfs_remove/snd_ctl_led_init/snd_ctl_led_exit.

Note that, when CONFIG_DEBUG_KOBJECT_RELEASE is enabled, put_device will
call kobject_release and delay the release of kobject, which will cause
use-after-free when the memory backing the kobject is freed at once.

Reported-by: syzbot+08a7d8b51ea048a74ffb@syzkaller.appspotmail.com
Fixes: a135dfb5 ("ALSA: led control - add sysfs kcontrol LED marking layer")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210602034136.2762497-1-mudongliangabcd@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The recent changes to use common code to power up/down DSP cores also
removed the reset of the core state at suspend. It turns out this is
still needed. When the firmware state is reset to
SOF_FW_BOOT_NOT_STARTED, also enabled_cores should be reset, and
existing DSP drivers depend on this.

BugLink: https://github.com/thesofproject/linux/issues/2824
Fixes: 42077f08 ("ASoC: SOF: update dsp core power status in common APIs")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210528144330.2551-1-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Otherwise, when compiled as module, a WARN_ON is triggered:

WARNING: CPU: 0 PID: 5 at sound/core/init.c:208 snd_card_new+0x310/0x39c [snd]
[...]
CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.10.39 #1
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
Workqueue: events deferred_probe_work_func
[<c0111988>] (unwind_backtrace) from [<c010c8ac>] (show_stack+0x10/0x14)
[<c010c8ac>] (show_stack) from [<c092784c>] (dump_stack+0xdc/0x104)
[<c092784c>] (dump_stack) from [<c0129710>] (__warn+0xd8/0x114)
[<c0129710>] (__warn) from [<c0922a48>] (warn_slowpath_fmt+0x5c/0xc4)
[<c0922a48>] (warn_slowpath_fmt) from [<bf0496f8>] (snd_card_new+0x310/0x39c [snd])
[<bf0496f8>] (snd_card_new [snd]) from [<bf1d7df8>] (snd_soc_bind_card+0x334/0x9c4 [snd_soc_core])
[<bf1d7df8>] (snd_soc_bind_card [snd_soc_core]) from [<bf1e9cd8>] (devm_snd_soc_register_card+0x30/0x6c [snd_soc_core])
[<bf1e9cd8>] (devm_snd_soc_register_card [snd_soc_core]) from [<bf22d964>] (fsl_asoc_card_probe+0x550/0xcc8 [snd_soc_fsl_asoc_card])
[<bf22d964>] (fsl_asoc_card_probe [snd_soc_fsl_asoc_card]) from [<c060c930>] (platform_drv_probe+0x48/0x98)
[...]
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20210527163409.22049-1-nicolas.cavallari@green-communications.frSigned-off-by: Mark Brown <broonie@kernel.org>

There are spelling mistakes in comments. Fix them.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210601103506.9477-1-colin.king@canonical.comSigned-off-by: Mark Brown <broonie@kernel.org>

For the HP Pavilion 15-CK0xx, with audio subsystem ID 0x103c:0x841c,
adding a line in patch_realtek.c to apply the ALC269_FIXUP_HP_MUTE_LED_MIC3
fix activates the mute key LED.
Signed-off-by: Carlos M <carlos.marr.pz@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210531202026.35427-1-carlos.marr.pz@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Previously this fix was applied only to Bullseye variant laptops,
and should be applied to Cyborg and Warlock variants.

Fixes: 45b14fe2 ("ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on Bullseye")
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210531163754.136736-1-vitalyr@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The recent commit to drop the HDA-specific mute-LED control,
e65bf997 ("ALSA: HDA - remove the custom implementation for the
audio LED trigger"), caused a regression on the mixer element read for
"Capture Switch" when it's built from bind controls.  The function
create_bind_cap_vol_ctl() creates the snd_kcontrol_new object directly
via snd_hda_gen_add_kctl() instead of add_control().  Although the
commit above added a workaround for the SNDRV_CTL_ACCESS_READWRITE in
add_control() as default, this code path fell out from the radar.  As
a result, now the driver gives -EPERM error because of the lack of the
proper access bit at reading "Capture Switch" element value.

Fix the regression by setting the access bit properly.

Fixes: e65bf997 ("ALSA: HDA - remove the custom implementation for the audio LED trigger")
BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1186634
Link: https://lore.kernel.org/r/20210531180633.27831-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Add HD Audio PCI ID for Intel AlderLake-M. Add rules to
snd_intel_dsp_find_config() to choose SOF driver for ADL-M systems with
PCH-DMIC or Soundwire codecs, and legacy driver for the rest.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210528185123.48332-1-kai.vehmanen@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The power of "LDO2", "MICBIAS1" and "Mic Det Power" were powered off after
the DAPM widgets were added, and these powers were set by the JD settings
"RT5659_JD_HDA_HEADER" in the probe function. In the codec probe function,
these powers were ignored to prevent them controlled by DAPM.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Message-Id: <15fced51977b458798ca4eebf03dafb9@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The HP ZBook Studio 17.3 Inch G8 is using ALC285 codec which is
using 0x04 to control mute LED and 0x01 to control micmute LED.
In the other hand, there is no output from right channel of speaker.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210519170357.58410-4-jeremy.szu@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The HP ZBook Fury 15.6 Inch G8 is using ALC285 codec which is
using 0x04 to control mute LED and 0x01 to control micmute LED.
In the other hand, there is no output from right channel of speaker.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210519170357.58410-3-jeremy.szu@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The HP ZBook Studio 15.6 Inch G8 is using ALC285 codec which is
using 0x04 to control mute LED and 0x01 to control micmute LED.
In the other hand, there is no output from right channel of speaker.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210519170357.58410-2-jeremy.szu@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The HP EliteBook 855 G8 Notebook PC is using ALC285 codec which needs
ALC285_FIXUP_HP_MUTE_LED fixup to make it works. After applying the
fixup, the mute/micmute LEDs work good.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210519170357.58410-1-jeremy.szu@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Lenovo ThinkStation P340 uses ALC623 codec (SSID 17aa:1048) and it produces
bug plock/pop noise over line out (green jack on the back) which can be
fixed by applying ALC269_FIXUP_NO_SHUTUP tot he machine.

Convert the existing entry for the same SSID to chain to apply this fixup
as well.
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210524203726.2278-1-peter.ujfalusi@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-fix-v5.13-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.13

A collection of fixes that have come in since the merge window, mainly
device specific things.  The fixes to the generic cards from
Morimoto-san are handling regressions that were introduced in the merge
window on at least the Kontron sl28-var3-ads2.

Check the return value of devm_kstrdup() in case of
Null-point-dereference.

Fixes: 45dd9943 ("ASoC: core: remove artificial component and DAI name constraint")
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Link: https://lore.kernel.org/r/20210524024941.159952-1-wangkefeng.wang@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

sound/usb/mixer_scarlett_gen2.c:2000:5: warning: symbol 'snd_scarlett_gen2_controls_create' was not declared. Should it be static?

Fixes: 265d1a90 ("ALSA: usb-audio: scarlett2: Improve driver startup messages")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20210522180900.GA83915@f59a3af2f1d9Signed-off-by: Takashi Iwai <tiwai@suse.de>

The Lenovo Yoga 9i has bass speaker, but the bass speaker can't work,
that is because there is an i2s amplifier on that speaker, need to
run ideapad_s740_coef() to initialize the amplifier.

And also needs to apply ALC285_FIXUP_THINKPAD_HEADSET_JACK to rename
the speaker's mixer control name, otherwise the PA can't handle them.

BugLink: http://bugs.launchpad.net/bugs/1926165Signed-off-by: Hui Wang <hui.wang@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210522042645.14221-1-hui.wang@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

On some ASUS and MSI machines, the audio codec is alc1220 and the
Headphone is connected to audio mixer 0xf and DAC 0x5, in theory
the Headphone volume is controlled by DAC 0x5 (Heapdhone Playback
Volume), but somehow it is controlled by DAC 0x2 (Front Playback
Volume), maybe this is a defect on the codec alc1220.

Because of this issue, the PA couldn't switch the headphone and
Lineout correctly, If we apply the quirk CLEVO_P950 to those machines,
the Lineout and Headphone will share the audio mixer 0xc and DAC 0x2,
and generate Headphone+LO mixer, then PA could handle them when
switching between them.

BugLink: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/1206
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210522034741.13415-1-hui.wang@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Add separate init function to call the existing controls_create
function so a custom error can be displayed if initialisation fails.

Use info level instead of error for notifications.

Display the VID/PID so device_setup is targeted to the right device.

Display "enabled" message to easily confirm that the driver is loaded.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/b5d140c65f640faf2427e085fbbc0297b32e5fce.1621584566.git.g@b4.vuSigned-off-by: Takashi Iwai <tiwai@suse.de>

Use usb_rcvctrlpipe() not usb_sndctrlpipe() for USB control input in
the Scarlett Gen 2 mixer driver. This fixes the device hang during
initialisation when used with the ehci-pci host driver.

Fixes: 9e4d5c1b ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/66a3d05dac325d5b53e4930578e143cef1f50dbe.1621584566.git.g@b4.vuSigned-off-by: Takashi Iwai <tiwai@suse.de>

The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.

Fix the UAC2_CS_CUR request which erroneously used usb_sndctrlpipe().

Fixes: 93db51d0 ("ALSA: usb-audio: Check valid altsetting at parsing rates for UAC2/3")
Cc: stable@vger.kernel.org      # 5.10
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210521133742.18098-1-johan@kernel.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>

This driver spits out a warning for me at boot:

 sc7180-lpass-cpu 62f00000.lpass: asoc_qcom_lpass_cpu_platform_probe() error getting optional null: -2

but it looks like it is all an optional clk. Use the optional clk APIs
here so that we don't see this message and everything else is the same.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Banajit Goswami <bgoswami@codeaurora.org>
Fixes: 3e53ac82 ("ASoC: qcom: make osr clock optional")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210520014807.3749797-1-swboyd@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>

This error path returns zero (success) but it should return -EINVAL.

Fixes: 3333cb71 ("ASoC: cs35l33: Initial commit of the cs35l33 CODEC driver.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/YKXuyGEzhPT35R3G@mwandaSigned-off-by: Mark Brown <broonie@kernel.org>

The initialization of MIDI devices that are found on some LINE6
drivers are currently done in a racy way; namely, the MIDI buffer
instance is allocated and initialized in each private_init callback
while the communication with the interface is already started via
line6_init_cap_control() call before that point.  This may lead to
Oops in line6_data_received() when a spurious event is received, as
reported by syzkaller.

This patch moves the MIDI initialization to line6_init_cap_control()
as well instead of the too-lately-called private_init for avoiding the
race.  Also this reduces slightly more lines, so it's a win-win
change.

Reported-by: syzbot+0d2b3feb0a2887862e06@syzkallerlkml..appspotmail.com
Link: https://lore.kernel.org/r/000000000000a4be9405c28520de@google.com
Link: https://lore.kernel.org/r/20210517132725.GA50495@hyeyoo
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210518083939.1927-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>