- 02 Nov, 2016 29 commits
-
-
Geert Uytterhoeven authored
soc: renesas: Add R-Car RST driver for obtaining mode pin state
-
Geert Uytterhoeven authored
The R-Car Gen2 board code no longer calls rcar_gen2_clocks_init(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
-
Geert Uytterhoeven authored
The R-Car H1 board code no longer calls r8a7779_clocks_init(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
-
Geert Uytterhoeven authored
The R-Car M1A board code no longer calls r8a7778_clocks_init(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
-
Geert Uytterhoeven authored
Now the R-Car Gen2 CPG clock driver obtains the state of the mode pins from the R-Car RST driver, there's no longer a need to pass this state explicitly. Hence we can just call of_clk_init() instead. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
-
Geert Uytterhoeven authored
Now the R-Car H1 CPG clock driver obtains the state of the mode pins from the R-Car RST driver, there's no longer a need to pass this state explicitly. Hence we can just remove the .init_time() callback, the generic ARM code will take care of calling of_clk_init() and clocksource_probe(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
-
Geert Uytterhoeven authored
Now the R-Car M1A CPG clock driver obtains the state of the mode pins from the R-Car RST driver, there's no longer a need to pass this state explicitly. Hence we can just remove the .init_time() callback, the generic ARM code will take care of calling of_clk_init(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
-
Geert Uytterhoeven authored
All R-Car Gen3 clock drivers now obtain the values of the mode pins from the R-Car RST driver. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Dirk Behme <dirk.behme@de.bosch.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-
Geert Uytterhoeven authored
Obtain the values of the mode pins from the R-Car RST driver, which relies on the presence in DT of a device node for the RST module. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Dirk Behme <dirk.behme@de.bosch.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-
Geert Uytterhoeven authored
Obtain the values of the mode pins from the R-Car RST driver, which relies on the presence in DT of a device node for the RST module. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Dirk Behme <dirk.behme@de.bosch.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-
Geert Uytterhoeven authored
Obtain the values of the mode pins from the R-Car RST driver, which relies on the presence in DT of a device node for the RST module. Fall back to our own private copy of rcar_gen2_read_mode_pins() for backward-compatibility with old DTs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
-
Geert Uytterhoeven authored
Obtain the values of the mode pins from the R-Car RST driver, which relies on the presence in DT of a device node for the RESET/WDT module. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
-
Geert Uytterhoeven authored
Obtain the values of the mode pins from the R-Car RST driver, which relies on the presence in DT of a device node for the RESET/WDT module. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
-
Geert Uytterhoeven authored
Add a device node for the RST module, which provides a.o. reset control and mode pin monitoring. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
-
Geert Uytterhoeven authored
Add a device node for the RST module, which provides a.o. reset control and mode pin monitoring. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
-
Geert Uytterhoeven authored
Add a device node for the RST module, which provides a.o. reset control and mode pin monitoring. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
-
Geert Uytterhoeven authored
Add a device node for the RST module, which provides a.o. reset control and mode pin monitoring. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
-
Geert Uytterhoeven authored
Add a device node for the RST module, which provides a.o. reset control and mode pin monitoring. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
-
Geert Uytterhoeven authored
Add a device node for the RST module, which provides a.o. reset control and mode pin monitoring. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
-
Geert Uytterhoeven authored
Add a device node for the RST module, which provides a.o. reset control and mode pin monitoring. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
-
Geert Uytterhoeven authored
Add a device node for the RESET/WDT module, which provides a.o. reset control, mode pin monitoring, and watchdog control. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
-
Geert Uytterhoeven authored
Add a device node for the RESET/WDT module, which provides a.o. reset control, mode pin monitoring, and watchdog control. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
-
Geert Uytterhoeven authored
Add a driver for the Renesas R-Car Gen1 RESET/WDT and R-Car Gen2/Gen3 and RZ/G RST module. For now this driver just provides an API to obtain the state of the mode pins, as latched at reset time. As this is typically called from the probe function of a clock driver, which can run much earlier than any initcall, calling rcar_rst_read_mode_pins() just forces an early initialization of the driver. Despite the current simple and almost identical handling for all supported SoCs, the driver matches against SoC-specific compatible values, as the features provided by the hardware module differ a lot across the various SoC families and members. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
-
Geert Uytterhoeven authored
Add DT bindings for the Renesas R-Car Reset Controller (R-Car Gen1 RESET/WDT and R-Car Gen2/Gen3 and RZ/G RST). As the features provided by the hardware module differ a lot across the various SoC families and members, only SoC-specific compatible values are defined. For now we use the RST only for providing access to the state of the mode pins, which is needed by the clock driver. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Dirk Behme <dirk.behme@de.bosch.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org>
-
Laurent Pinchart authored
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
-
Laurent Pinchart authored
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
-
Laurent Pinchart authored
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
-
Geert Uytterhoeven authored
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
-
Ramesh Shanmugasundaram authored
This patch adds DRIF module clocks for r8a7796 SoC. Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
-
- 17 Oct, 2016 7 commits
-
-
Geert Uytterhoeven authored
The intention was to enable the checks if debugging is enabled, not disabled. Fixes: f793d1e5 ("clk: shmobile: Add new CPG/MSSR driver core") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
-
Geert Uytterhoeven authored
The R-Car Gen3 CPG/MSSR driver uses a mix of clk_readl()/clk_writel() and readl()/writel() to access the clock registers. Settle on the generic readl()/writel(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Stephen Boyd <sboyd@codeaurora.org>
-
Geert Uytterhoeven authored
The Renesas CPG/MSSR driver core uses a mix of clk_readl()/clk_writel() and readl()/writel() to access the clock registers. Settle on the generic readl()/writel(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Stephen Boyd <sboyd@codeaurora.org>
-
Ulrich Hecht authored
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
-
Ulrich Hecht authored
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
-
Ulrich Hecht authored
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
-
Ulrich Hecht authored
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
-
- 15 Oct, 2016 4 commits
-
-
Linus Torvalds authored
-
git://github.com/luisbg/linux-befsLinus Torvalds authored
Pull befs fixes from Luis de Bethencourt: "I recently took maintainership of the befs file system [0]. This is the first time I send you a git pull request, so please let me know if all the below is OK. Salah Triki and myself have been cleaning the code and fixing a few small bugs. Sorry I couldn't send this sooner in the merge window, I was waiting to have my GPG key signed by kernel members at ELCE in Berlin a few days ago." [0] https://lkml.org/lkml/2016/7/27/502 * tag 'befs-v4.9-rc1' of git://github.com/luisbg/linux-befs: (39 commits) befs: befs: fix style issues in datastream.c befs: improve documentation in datastream.c befs: fix typos in datastream.c befs: fix typos in btree.c befs: fix style issues in super.c befs: fix comment style befs: add check for ag_shift in superblock befs: dump inode_size superblock information befs: remove unnecessary initialization befs: fix typo in befs_sb_info befs: add flags field to validate superblock state befs: fix typo in befs_find_key befs: remove unused BEFS_BT_PARMATCH fs: befs: remove ret variable fs: befs: remove in vain variable assignment fs: befs: remove unnecessary *befs_sb variable fs: befs: remove useless initialization to zero fs: befs: remove in vain variable assignment fs: befs: Insert NULL inode to dentry fs: befs: Remove useless calls to brelse in befs_find_brun_dblindirect ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull gcc plugins update from Kees Cook: "This adds a new gcc plugin named "latent_entropy". It is designed to extract as much possible uncertainty from a running system at boot time as possible, hoping to capitalize on any possible variation in CPU operation (due to runtime data differences, hardware differences, SMP ordering, thermal timing variation, cache behavior, etc). At the very least, this plugin is a much more comprehensive example for how to manipulate kernel code using the gcc plugin internals" * tag 'gcc-plugins-v4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: latent_entropy: Mark functions with __latent_entropy gcc-plugins: Add latent_entropy plugin
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS updates from Ralf Baechle: "This is the main MIPS pull request for 4.9: MIPS core arch code: - traps: 64bit kernels should read CP0_EBase 64bit - traps: Convert ebase to KSEG0 - c-r4k: Drop bc_wback_inv() from icache flush - c-r4k: Split user/kernel flush_icache_range() - cacheflush: Use __flush_icache_user_range() - uprobes: Flush icache via kernel address - KVM: Use __local_flush_icache_user_range() - c-r4k: Fix flush_icache_range() for EVA - Fix -mabi=64 build of vdso.lds - VDSO: Drop duplicated -I*/-E* aflags - tracing: move insn_has_delay_slot to a shared header - tracing: disable uprobe/kprobe on compact branch instructions - ptrace: Fix regs_return_value for kernel context - Squash lines for simple wrapper functions - Move identification of VP(E) into proc.c from smp-mt.c - Add definitions of SYNC barrierstype values - traps: Ensure full EBase is written - tlb-r4k: If there are wired entries, don't use TLBINVF - Sanitise coherentio semantics - dma-default: Don't check hw_coherentio if device is non-coherent - Support per-device DMA coherence - Adjust MIPS64 CAC_BASE to reflect Config.K0 - Support generating Flattened Image Trees (.itb) - generic: Introduce generic DT-based board support - generic: Convert SEAD-3 to a generic board - Enable hardened usercopy - Don't specify STACKPROTECTOR in defconfigs Octeon: - Delete dead code and files across the platform. - Change to use all memory into use by default. - Rename upper case variables in setup code to lowercase. - Delete legacy hack for broken bootloaders. - Leave maintaining the link state to the actual ethernet/PHY drivers. - Add DTS for D-Link DSR-500N. - Fix PCI interrupt routing on D-Link DSR-500N. Pistachio: - Remove ANDROID_TIMED_OUTPUT from defconfig TX39xx: - Move GPIO setup from .mem_setup() to .arch_init() - Convert to Common Clock Framework TX49xx: - Move GPIO setup from .mem_setup() to .arch_init() - Convert to Common Clock Framework txx9wdt: - Add missing clock (un)prepare calls for CCF BMIPS: - Add PW, GPIO SDHCI and NAND device node names - Support APPENDED_DTB - Add missing bcm97435svmb to DT_NONE - Rename bcm96358nb4ser to bcm6358-neufbox4-sercom - Add DT examples for BCM63268, BCM3368 and BCM6362 - Add support for BCM3368 and BCM6362 PCI - Reduce stack frame usage - Use struct list_head lists - Support for CONFIG_PCI_DOMAINS_GENERIC - Make pcibios_set_cache_line_size an initcall - Inline pcibios_assign_all_busses - Split pci.c into pci.c & pci-legacy.c - Introduce CONFIG_PCI_DRIVERS_LEGACY - Support generic drivers CPC - Convert bare 'unsigned' to 'unsigned int' - Avoid lock when MIPS CM >= 3 is present GIC: - Delete unused file smp-gic.c mt7620: - Delete unnecessary assignment for the field "owner" from PCI BCM63xx: - Let clk_disable() return immediately if clk is NULL pm-cps: - Change FSB workaround to CPU blacklist - Update comments on barrier instructions - Use MIPS standard lightweight ordering barrier - Use MIPS standard completion barrier - Remove selection of sync types - Add MIPSr6 CPU support - Support CM3 changes to Coherence Enable Register SMP: - Wrap call to mips_cpc_lock_other in mips_cm_lock_other - Introduce mechanism for freeing and allocating IPIs cpuidle: - cpuidle-cps: Enable use with MIPSr6 CPUs. SEAD3: - Rewrite to use DT and generic kernel feature. USB: - host: ehci-sead3: Remove SEAD-3 EHCI code FBDEV: - cobalt_lcdfb: Drop SEAD3 support dt-bindings: - Document a binding for simple ASCII LCDs auxdisplay: - img-ascii-lcd: driver for simple ASCII LCD displays irqchip i8259: - i8259: Add domain before mapping parent irq - i8259: Allow platforms to override poll function - i8259: Remove unused i8259A_irq_pending Malta: - Rewrite to use DT of/platform: - Probe "isa" busses by default CM: - Print CM error reports upon bus errors Module: - Migrate exception table users off module.h and onto extable.h - Make various drivers explicitly non-modular: - Audit and remove any unnecessary uses of module.h mailmap: - Canonicalize to Qais' current email address. Documentation: - MIPS supports HAVE_REGS_AND_STACK_ACCESS_API Loongson1C: - Add CPU support for Loongson1C - Add board support - Add defconfig - Add RTC support for Loongson1C board All this except one Documentation fix has sat in linux-next and has survived Imagination's automated build test system" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (127 commits) Documentation: MIPS supports HAVE_REGS_AND_STACK_ACCESS_API MIPS: ptrace: Fix regs_return_value for kernel context MIPS: VDSO: Drop duplicated -I*/-E* aflags MIPS: Fix -mabi=64 build of vdso.lds MIPS: Enable hardened usercopy MIPS: generic: Convert SEAD-3 to a generic board MIPS: generic: Introduce generic DT-based board support MIPS: Support generating Flattened Image Trees (.itb) MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0 MIPS: Print CM error reports upon bus errors MIPS: Support per-device DMA coherence MIPS: dma-default: Don't check hw_coherentio if device is non-coherent MIPS: Sanitise coherentio semantics MIPS: PCI: Support generic drivers MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY MIPS: PCI: Split pci.c into pci.c & pci-legacy.c MIPS: PCI: Inline pcibios_assign_all_busses MIPS: PCI: Make pcibios_set_cache_line_size an initcall MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC MIPS: PCI: Use struct list_head lists ...
-