- 04 Jul, 2015 35 commits
-
-
Greg Kroah-Hartman authored
-
Christoffer Dall authored
commit 716139df upstream. When the vgic initializes its internal state it does so based on the number of VCPUs available at the time. If we allow KVM to create more VCPUs after the VGIC has been initialized, we are likely to error out in unfortunate ways later, perform buffer overflows etc. Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Reviewed-by:
Eric Auger <eric.auger@linaro.org> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christoffer Dall authored
commit 957db105 upstream. Introduce a new function to unmap user RAM regions in the stage2 page tables. This is needed on reboot (or when the guest turns off the MMU) to ensure we fault in pages again and make the dcache, RAM, and icache coherent. Using unmap_stage2_range for the whole guest physical range does not work, because that unmaps IO regions (such as the GIC) which will not be recreated or in the best case faulted in on a page-by-page basis. Call this function on secondary and subsequent calls to the KVM_ARM_VCPU_INIT ioctl so that a reset VCPU will detect the guest Stage-1 MMU is off when faulting in pages and make the caches coherent. Acked-by:
-
Christoffer Dall authored
commit b856a591 upstream. When userspace resets the vcpu using KVM_ARM_VCPU_INIT, we should also reset the HCR, because we now modify the HCR dynamically to enable/disable trapping of guest accesses to the VM registers. This is crucial for reboot of VMs working since otherwise we will not be doing the necessary cache maintenance operations when faulting in pages with the guest MMU off. Acked-by:
-
Christoffer Dall authored
commit 3ad8b3de upstream. The implementation of KVM_ARM_VCPU_INIT is currently not doing what userspace expects, namely making sure that a vcpu which may have been turned off using PSCI is returned to its initial state, which would be powered on if userspace does not set the KVM_ARM_VCPU_POWER_OFF flag. Implement the expected functionality and clarify the ABI. Acked-by:
-
Christoffer Dall authored
commit 03f1d4c1 upstream. If a VCPU was originally started with power off (typically to be brought up by PSCI in SMP configurations), there is no need to clear the POWER_OFF flag in the kernel, as this flag is only tested during the init ioctl itself. Acked-by:
-
Ard Biesheuvel authored
commit 07a9748c upstream. Instead of using kvm_is_mmio_pfn() to decide whether a host region should be stage 2 mapped with device attributes, add a new static function kvm_is_device_pfn() that disregards RAM pages with the reserved bit set, as those should usually not be mapped as device memory. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
Geoff Levand authored
commit 286fb1cc upstream. Some of the macros defined in kvm_arm.h are useful in assembly files, but are not compatible with the assembler. Change any C language integer constant definitions using appended U, UL, or ULL to the UL() preprocessor macro. Also, add a preprocessor include of the asm/memory.h file which defines the UL() macro. Fixes build errors like these when using kvm_arm.h in assembly source files: Error: unexpected characters following instruction at operand 3 -- `and x0,x1,#((1U<<25)-1)' Acked-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Geoff Levand <geoff@infradead.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Christoffer Dall authored
commit 6b50f540 upstream. If we detect another vCPU is running we just exit and return 0 as if we succesfully created the VGIC, but the VGIC wouldn't actual be created. This shouldn't break in-kernel behavior because the kernel will not observe the failed the attempt to create the VGIC, but userspace could be rightfully confused. Cc: Andre Przywara <andre.przywara@arm.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Mark Rutland authored
commit 7cbb87d6 upstream. Currently if using a 48-bit VA, tearing down the hyp page tables (which can happen in the absence of a GICH or GICV resource) results in the rather nasty splat below, evidently becasue we access a table that doesn't actually exist. Commit 38f791a4 (arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2) added a pgd_none check to __create_hyp_mappings to account for the additional level of tables, but didn't add a corresponding check to unmap_range, and this seems to be the source of the problem. This patch adds the missing pgd_none check, ensuring we don't try to access tables that don't exist. Original splat below: kvm [1]: Using HYP init bounce page @83fe94a000 kvm [1]: Cannot obtain GICH resource Unable to handle kernel paging request at virtual address ffff7f7fff000000 pgd = ffff800000770000 [ffff7f7fff000000] *pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc2+ #89 task: ffff8003eb500000 ti: ffff8003eb45c000 task.ti: ffff8003eb45c000 PC is at unmap_range+0x120/0x580 LR is at free_hyp_pgds+0xac/0xe4 pc : [<ffff80000009b768>] lr : [<ffff80000009cad8>] pstate: 80000045 sp : ffff8003eb45fbf0 x29: ffff8003eb45fbf0 x28: ffff800000736000 x27: ffff800000735000 x26: ffff7f7fff000000 x25: 0000000040000000 x24: ffff8000006f5000 x23: 0000000000000000 x22: 0000007fffffffff x21: 0000800000000000 x20: 0000008000000000 x19: 0000000000000000 x18: ffff800000648000 x17: ffff800000537228 x16: 0000000000000000 x15: 000000000000001f x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000020 x11: 0000000000000062 x10: 0000000000000006 x9 : 0000000000000000 x8 : 0000000000000063 x7 : 0000000000000018 x6 : 00000003ff000000 x5 : ffff800000744188 x4 : 0000000000000001 x3 : 0000000040000000 x2 : ffff800000000000 x1 : 0000007fffffffff x0 : 000000003fffffff Process swapper/0 (pid: 1, stack limit = 0xffff8003eb45c058) Stack: (0xffff8003eb45fbf0 to 0xffff8003eb460000) fbe0: eb45fcb0 ffff8003 0009cad8 ffff8000 fc00: 00000000 00000080 00736140 ffff8000 00736000 ffff8000 00000000 00007c80 fc20: 00000000 00000080 006f5000 ffff8000 00000000 00000080 00743000 ffff8000 fc40: 00735000 ffff8000 006d3030 ffff8000 006fe7b8 ffff8000 00000000 00000080 fc60: ffffffff 0000007f fdac1000 ffff8003 fd94b000 ffff8003 fda47000 ffff8003 fc80: 00502b40 ffff8000 ff000000 ffff7f7f fdec6000 00008003 fdac1630 ffff8003 fca0: eb45fcb0 ffff8003 ffffffff 0000007f eb45fd00 ffff8003 0009b378 ffff8000 fcc0: ffffffea 00000000 006fe000 ffff8000 00736728 ffff8000 00736120 ffff8000 fce0: 00000040 00000000 00743000 ffff8000 006fe7b8 ffff8000 0050cd48 00000000 fd00: eb45fd60 ffff8003 00096070 ffff8000 006f06e0 ffff8000 006f06e0 ffff8000 fd20: fd948b40 ffff8003 0009a320 ffff8000 00000000 00000000 00000000 00000000 fd40: 00000ae0 00000000 006aa25c ffff8000 eb45fd60 ffff8003 0017ca44 00000002 fd60: eb45fdc0 ffff8003 0009a33c ffff8000 006f06e0 ffff8000 006f06e0 ffff8000 fd80: fd948b40 ffff8003 0009a320 ffff8000 00000000 00000000 00735000 ffff8000 fda0: 006d3090 ffff8000 006aa25c ffff8000 00735000 ffff8000 006d3030 ffff8000 fdc0: eb45fdd0 ffff8003 000814c0 ffff8000 eb45fe50 ffff8003 006aaac4 ffff8000 fde0: 006ddd90 ffff8000 00000006 00000000 006d3000 ffff8000 00000095 00000000 fe00: 006a1e90 ffff8000 00735000 ffff8000 006d3000 ffff8000 006aa25c ffff8000 fe20: 00735000 ffff8000 006d3030 ffff8000 eb45fe50 ffff8003 006fac68 ffff8000 fe40: 00000006 00000006 fe293ee6 ffff8003 eb45feb0 ffff8003 004f8ee8 ffff8000 fe60: 004f8ed4 ffff8000 00735000 ffff8000 00000000 00000000 00000000 00000000 fe80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 fea0: 00000000 00000000 00000000 00000000 00000000 00000000 000843d0 ffff8000 fec0: 004f8ed4 ffff8000 00000000 00000000 00000000 00000000 00000000 00000000 fee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffa0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000005 00000000 ffe0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Call trace: [<ffff80000009b768>] unmap_range+0x120/0x580 [<ffff80000009cad4>] free_hyp_pgds+0xa8/0xe4 [<ffff80000009b374>] kvm_arch_init+0x268/0x44c [<ffff80000009606c>] kvm_init+0x24/0x260 [<ffff80000009a338>] arm_init+0x18/0x24 [<ffff8000000814bc>] do_one_initcall+0x88/0x1a0 [<ffff8000006aaac0>] kernel_init_freeable+0x148/0x1e8 [<ffff8000004f8ee4>] kernel_init+0x10/0xd4 Code: 8b000263 92628479 d1000720 eb01001f (f9400340) ---[ end trace 3bc230562e926fa4 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Signed-off-by:
-
Steve Capper authored
commit 3d08c629 upstream. Commit: b8865767 ARM: KVM: user_mem_abort: support stage 2 MMIO page mapping introduced some code in user_mem_abort that failed to compile if STRICT_MM_TYPECHECKS was enabled. This patch fixes up the failing comparison. Signed-off-by:
Steve Capper <steve.capper@linaro.org> Reviewed-by:
Kim Phillips <kim.phillips@linaro.org> Signed-off-by:
-
Christoffer Dall authored
commit c3058d5d upstream. [Since we don't backport commit 8eef9123 (arm/arm64: KVM: map MMIO regions at creation time) for linux-3.14.y, the context of this patch is different, while the change itself is same.] When creating or moving a memslot, make sure the IPA space is within the addressable range of the guest. Otherwise, user space can create too large a memslot and KVM would try to access potentially unallocated page table entries when inserting entries in the Stage-2 page tables. Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Acked-by:
-
Ard Biesheuvel authored
commit 37b54408 upstream. Handle the potential NULL return value of find_vma_intersection() before dereferencing it. Acked-by:
-
Vladimir Murzin authored
commit 37a34ac1 upstream. On some platforms with no power management capabilities, the hotplug implementation is allowed to return from a smp_ops.cpu_die() call as a function return. Upon a CPU onlining event, the KVM CPU notifier tries to reinstall the hyp stub, which fails on platform where no reset took place following a hotplug event, with the message: CPU1: smp_ops.cpu_die() returned, trying to resuscitate CPU1: Booted secondary processor Kernel panic - not syncing: unexpected prefetch abort in Hyp mode at: 0x80409540 unexpected data abort in Hyp mode at: 0x80401fe8 unexpected HVC/SVC trap in Hyp mode at: 0x805c6170 since KVM code is trying to reinstall the stub on a system where it is already configured. To prevent this issue, this patch adds a check in the KVM hotplug notifier that detects if the HYP stub really needs re-installing when a CPU is onlined and skips the installation call if the stub is already in place, which means that the CPU has not been reset. Signed-off-by:
Vladimir Murzin <vladimir.murzin@arm.com> Acked-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by:
-
Joel Schopp authored
commit dbff124e upstream. The current aarch64 calculation for VTTBR_BADDR_MASK masks only 39 bits and not all the bits in the PA range. This is clearly a bug that manifests itself on systems that allocate memory in the higher address space range. [ Modified from Joel's original patch to be based on PHYS_MASK_SHIFT instead of a hard-coded value and to move the alignment check of the allocation to mmu.c. Also added a comment explaining why we hardcode the IPA range and changed the stage-2 pgd allocation to be based on the 40 bit IPA range instead of the maximum possible 48 bit PA range. - Christoffer ] Reviewed-by:
Joel Schopp <joel.schopp@amd.com> Signed-off-by:
-
Christoffer Dall authored
commit 0fea6d76 upstream. The sgi values calculated in read_set_clear_sgi_pend_reg() and write_set_clear_sgi_pend_reg() were horribly incorrectly multiplied by 4 with catastrophic results in that subfunctions ended up overwriting memory not allocated for the expected purpose. This showed up as bugs in kfree() and the kernel complaining a lot of you turn on memory debugging. This addresses: http://marc.info/?l=kvm&m=141164910007868&w=2Reported-by:
Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by:
-
Marc Zyngier authored
commit 71afaba4 upstream. [Since we don't backport commit 227844f5 (arm/arm64: KVM: Rename irq_state to irq_pending) for linux-3.14.y, here we still use vgic_update_irq_state instead of vgic_update_irq_pending.] As it stands, nothing prevents userspace from injecting an interrupt before the guest's GIC is actually initialized. This goes unnoticed so far (as everything is pretty much statically allocated), but ends up exploding in a spectacular way once we switch to a more dynamic allocation (the GIC data structure isn't there yet). The fix is to test for the "ready" flag in the VGIC distributor before trying to inject the interrupt. Note that in order to avoid breaking userspace, we have to ignore what is essentially an error. Signed-off-by:
-
Ard Biesheuvel authored
commit a7d079ce upstream. [Since we don't backport commit 98047888 (arm/arm64: KVM: Support KVM_CAP_READONLY_MEM), ingore the changes in kvm_handle_guest_abort introduced by this patch.] The ISS encoding for an exception from a Data Abort has a WnR bit[6] that indicates whether the Data Abort was caused by a read or a write instruction. While there are several fields in the encoding that are only valid if the ISV bit[24] is set, WnR is not one of them, so we can read it unconditionally. Instead of fixing both implementations of kvm_is_write_fault() in place, reimplement it just once using kvm_vcpu_dabt_iswrite(), which already does the right thing with respect to the WnR bit. Also fix up the callers to pass 'vcpu' Acked-by:
Laszlo Ersek <lersek@redhat.com> Acked-by:
-
Greg Ungerer authored
commit 5686a1e5 upstream. Until now, the mvebu-mbus was guessing by itself whether hardware I/O coherency was available or not by poking into the Device Tree to see if the coherency fabric Device Tree node was present or not. However, on some upcoming SoCs, the presence or absence of the coherency fabric DT node isn't sufficient: in CONFIG_SMP, the coherency can be enabled, but not in !CONFIG_SMP. In order to clean this up, the mvebu_mbus_dt_init() function is extended to get a boolean argument telling whether coherency is enabled or not. Therefore, the logic to decide whether coherency is available or not now belongs to the core SoC code instead of the mvebu-mbus driver itself, which is much better. Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1397483228-25625-4-git-send-email-thomas.petazzoni@free-electrons.comSigned-off-by:
Jason Cooper <jason@lakedaemon.net> [ Greg Ungerer: back ported to linux-3.14.y Back port necessary due to large code differences in affected files. This change in combination with commit e5535545 ("ARM: mvebu: disable I/O coherency on non-SMP situations on Armada 370/375/38x/XP") is critical to the hardware I/O coherency being set correctly by both the mbus driver and all peripheral hardware drivers. Without this change drivers will incorrectly enable I/O coherency window attributes and this causes rare unreliable system behavior including oops. ] Signed-off-by:
Greg Ungerer <gerg@uclinux.org> Signed-off-by:
-
Bandan Das authored
commit f104765b upstream. If hardware doesn't support DecodeAssist - a feature that provides more information about the intercept in the VMCB, KVM decodes the instruction and then updates the next_rip vmcb control field. However, NRIP support itself depends on cpuid Fn8000_000A_EDX[NRIPS]. Since skip_emulated_instruction() doesn't verify nrip support before accepting control.next_rip as valid, avoid writing this field if support isn't present. Signed-off-by:
Bandan Das <bsd@redhat.com> Signed-off-by:
-
Sebastien Szymanski authored
commit da946aea upstream. According to IMX6D/Q RM, table 18-3, sata clock's parent is ahb, not ipg. Signed-off-by:
Sebastien Szymanski <sebastien.szymanski@armadeus.com> Reviewed-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> [dirk.behme: Adjust moved file] Signed-off-by:
Dirk Behme <dirk.behme@gmail.com> Signed-off-by:
-
Ben Hutchings authored
commit 894c6350 from the 3.2-stable branch. We need to check the position and size of file writes against various limits, using generic_write_check(). This was not being done for the splice write path. It was fixed upstream by commit 8d020765 ("->splice_write() via ->write_iter()") but we can't apply that. CVE-2014-7822 Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Cc: Vinson Lee <vlee@twopensource.com> Signed-off-by:
-
Or Gerlitz authored
commit a4f2dacb upstream. For VXLAN/NVGRE encapsulation, the current HW doesn't support offloading both the outer UDP TX checksum and the inner TCP/UDP TX checksum. The driver doesn't advertize SKB_GSO_UDP_TUNNEL_CSUM, however we are wrongly telling the HW to offload the outer UDP checksum for encapsulated packets, fix that. Fixes: 837052d0 ('net/mlx4_en: Add netdev support for TCP/IP offloads of vxlan tunneling') Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Filipe Manana authored
commit 5f5bc6b1 upstream. Replacing a xattr consists of doing a lookup for its existing value, delete the current value from the respective leaf, release the search path and then finally insert the new value. This leaves a time window where readers (getxattr, listxattrs) won't see any value for the xattr. Xattrs are used to store ACLs, so this has security implications. This change also fixes 2 other existing issues which were: *) Deleting the old xattr value without verifying first if the new xattr will fit in the existing leaf item (in case multiple xattrs are packed in the same item due to name hash collision); *) Returning -EEXIST when the flag XATTR_CREATE is given and the xattr doesn't exist but we have have an existing item that packs muliple xattrs with the same name hash as the input xattr. In this case we should return ENOSPC. A test case for xfstests follows soon. Thanks to Alexandre Oliva for reporting the non-atomicity of the xattr replace implementation. Reported-by:
Alexandre Oliva <oliva@gnu.org> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Quentin Casasnovas authored
commit f84598bd upstream. mc_saved_tmp is a static array allocated on the stack, we need to make sure mc_saved_count stays within its bounds, otherwise we're overflowing the stack in _save_mc(). A specially crafted microcode header could lead to a kernel crash or potentially kernel execution. Signed-off-by:
Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Link: http://lkml.kernel.org/r/1422964824-22056-1-git-send-email-quentin.casasnovas@oracle.comSigned-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Tomas Henzl authored
commit 859c75ab upstream. Add a call to pci_set_master(...) missing in the previous patch "hpsa: refine the pci enable/disable handling". Found thanks to Rob Elliot. Signed-off-by:
Tomas Henzl <thenzl@redhat.com> Reviewed-by:
Robert Elliott <elliott@hp.com> Tested-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Pablo Neira Ayuso authored
commit d6b6cb1d upstream. If there's an existing base chain, we have to allow to change the default policy without indicating the hook information. However, if the chain doesn't exists, we have to enforce the presence of the hook attribute. Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Pablo Neira Ayuso authored
commit 749177cc upstream. ip6tables extensions check for this flag to restrict match/target to a given protocol. Without this flag set, SYNPROXY6 returns an error. Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Ian Wilson authored
commit 78146572 upstream. nfnl_cthelper_parse_tuple() is called from nfnl_cthelper_new(), nfnl_cthelper_get() and nfnl_cthelper_del(). In each case they pass a pointer to an nf_conntrack_tuple data structure local variable: struct nf_conntrack_tuple tuple; ... ret = nfnl_cthelper_parse_tuple(&tuple, tb[NFCTH_TUPLE]); The problem is that this local variable is not initialized, and nfnl_cthelper_parse_tuple() only initializes two fields: src.l3num and dst.protonum. This leaves all other fields with undefined values based on whatever is on the stack: tuple->src.l3num = ntohs(nla_get_be16(tb[NFCTH_TUPLE_L3PROTONUM])); tuple->dst.protonum = nla_get_u8(tb[NFCTH_TUPLE_L4PROTONUM]); The symptom observed was that when the rpc and tns helpers were added then traffic to port 1536 was being sent to user-space. Signed-off-by:
Ian Wilson <iwilson@brocade.com> Signed-off-by:
-
Tomas Henzl authored
commit 132aa220 upstream. When a second(kdump) kernel starts and the hard reset method is used the driver calls pci_disable_device without previously enabling it, so the kernel shows a warning - [ 16.876248] WARNING: at drivers/pci/pci.c:1431 pci_disable_device+0x84/0x90() [ 16.882686] Device hpsa disabling already-disabled device ... This patch fixes it, in addition to this I tried to balance also some other pairs of enable/disable device in the driver. Unfortunately I wasn't able to verify the functionality for the case of a sw reset, because of a lack of proper hw. Signed-off-by:
Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by:
-
Jim Snow authored
commit 8c009100 upstream. Signed-off-by:
Jim Snow <jim.snow@intel.com> Signed-off-by:
Lukasz Anaczkowski <lukasz.anaczkowski@intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> [ vlee: Backported to 3.14. Adjusted context. ] Signed-off-by:
Vinson Lee <vlee@twitter.com> Signed-off-by:
-
Chen Gang authored
commit b18c5d15 upstream. The related code can be simplified, and also can avoid related warnings (with allmodconfig under parisc): CC [M] net/netfilter/nfnetlink_cthelper.o net/netfilter/nfnetlink_cthelper.c: In function ‘nfnl_cthelper_from_nlattr’: net/netfilter/nfnetlink_cthelper.c:97:9: warning: passing argument 1 o ‘memcpy’ discards ‘const’ qualifier from pointer target type [-Wdiscarded-array-qualifiers] memcpy(&help->data, nla_data(attr), help->helper->data_len); ^ In file included from include/linux/string.h:17:0, from include/uapi/linux/uuid.h:25, from include/linux/uuid.h:23, from include/linux/mod_devicetable.h:12, from ./arch/parisc/include/asm/hardware.h:4, from ./arch/parisc/include/asm/processor.h:15, from ./arch/parisc/include/asm/spinlock.h:6, from ./arch/parisc/include/asm/atomic.h:21, from include/linux/atomic.h:4, from ./arch/parisc/include/asm/bitops.h:12, from include/linux/bitops.h:36, from include/linux/kernel.h:10, from include/linux/list.h:8, from include/linux/module.h:9, from net/netfilter/nfnetlink_cthelper.c:11: ./arch/parisc/include/asm/string.h:8:8: note: expected ‘void *’ but argument is of type ‘const char (*)[]’ void * memcpy(void * dest,const void *src,size_t count); ^ Signed-off-by:
Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@soleta.eu> Signed-off-by:
-
Konrad Rzeszutek Wilk authored
commit a6dfa128 upstream. A huge amount of NIC drivers use the DMA API, however if compiled under 32-bit an very important part of the DMA API can be ommitted leading to the drivers not working at all (especially if used with 'swiotlb=force iommu=soft'). As Prashant Sreedharan explains it: "the driver [tg3] uses DEFINE_DMA_UNMAP_ADDR(), dma_unmap_addr_set() to keep a copy of the dma "mapping" and dma_unmap_addr() to get the "mapping" value. On most of the platforms this is a no-op, but ... with "iommu=soft and swiotlb=force" this house keeping is required, ... otherwise we pass 0 while calling pci_unmap_/pci_dma_sync_ instead of the DMA address." As such enable this even when using 32-bit kernels. Reported-by:
Ian Jackson <Ian.Jackson@eu.citrix.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by:
Prashant Sreedharan <prashant@broadcom.com> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Chan <mchan@broadcom.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: boris.ostrovsky@oracle.com Cc: cascardo@linux.vnet.ibm.com Cc: david.vrabel@citrix.com Cc: sanjeevb@broadcom.com Cc: siva.kallam@broadcom.com Cc: vyasevich@gmail.com Cc: xen-devel@lists.xensource.com Link: http://lkml.kernel.org/r/20150417190448.GA9462@l.oracle.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Eugene Shatokhin authored
commit c80e5c0c upstream. On x86-64, __copy_instruction() always returns 0 (error) if the instruction uses %rip-relative addressing. This is because kernel_insn_init() is called the second time for 'insn' instance in such cases and sets all its fields to 0. Because of this, trying to place a kprobe on such instruction will fail, register_kprobe() will return -EINVAL. This patch fixes the problem. Signed-off-by:
Eugene Shatokhin <eugene.shatokhin@rosalab.ru> Signed-off-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20150317100918.28349.94654.stgit@localhost.localdomainSigned-off-by:
-
Marek Szyprowski authored
commit 6829e274 upstream. Buffers allocated by dma_alloc_coherent() are always zeroed on Alpha, ARM (32bit), MIPS, PowerPC, x86/x86_64 and probably other architectures. It turned out that some drivers rely on this 'feature'. Allocated buffer might be also exposed to userspace with dma_mmap() call, so clearing it is desired from security point of view to avoid exposing random memory to userspace. This patch unifies dma_alloc_coherent() behavior on ARM64 architecture with other implementations by unconditionally zeroing allocated buffer. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> [will: ported to 3.14.y] Signed-off-by:
-
- 29 Jun, 2015 5 commits
-
-
Greg Kroah-Hartman authored
-
Will Deacon authored
commit 1fa451bc upstream. vgic_ioaddr_overlap claims to return a bool, but in reality it returns an int. Shut sparse up by fixing the type signature. Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Will Deacon authored
commit 18d45766 upstream. is_valid_cache returns true if the specified cache is valid. Unfortunately, if the parameter passed it out of range, we return -ENOENT, which ends up as true leading to potential hilarity. This patch returns false on the failure path instead. Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Will Deacon authored
commit 4000be42 upstream. Running sparse results in a bunch of noisy address space mismatches thanks to the broken __percpu annotation on kvm_get_running_vcpus. This function returns a pcpu pointer to a pointer, not a pointer to a pcpu pointer. This patch fixes the annotation, which kills the warnings from sparse. Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Will Deacon authored
commit 6951e48b upstream. Sparse kicks up about a type mismatch for kvm_target_cpu: arch/arm64/kvm/guest.c:271:25: error: symbol 'kvm_target_cpu' redeclared with different type (originally declared at ./arch/arm64/include/asm/kvm_host.h:45) - different modifiers so fix this by adding the missing const attribute to the function declaration. Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
