Convert the driver to use the timer_of helpers.
This allows to remove custom proprietary structure,
factors out and simplifies the code.
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Use specific prefix to specify the name of supported
timer hardware: "General Purpose Timer (GPT)".
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Rename mtk_timer to timer-mediatek to apply new naming convention
in clocksource folder.
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

This patch adds bindings of new "System Timer" on Mediatek SoCs.

Remove RTC clock in the same time because it is not used by
both "General Purpose Timer" and "System Timer" now.
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Currently, quite a few clockevent devices have cpumask set to
cpu_all_mask which should be fine. However, cpu_possible_mask is more
accurate and if there are any other clockevent devices in the system
which have cpumask set to cpu_possible_mask, then having cpu_all_mask
may result in issues (mostly boot hang with forever loops in
clockevents_notify_released).

So, lets replace all the clockevent device cpu_all_mask to
cpu_possible_mask in order to prevent above mentioned possible issue.

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Merge tag 'fortglx/4.19/time-part2' of https://git.linaro.org/people/john.stultz/linux into timers/core

Pull the second set of timekeeping things for 4.19 from John Stultz

  * NTP argument clenaups and constification from Ondrej Mosnacek
  * Fix to avoid RTC injecting sleeptime when suspend fails from
    Mukesh Ojha
  * Broading suspsend-timing to include non-stop clocksources that
    aren't currently used for timekeeping from Baolin Wang

On some hardware with multiple clocksources, we have coarse grained
clocksources that support the CLOCK_SOURCE_SUSPEND_NONSTOP flag, but
which are less than ideal for timekeeping whereas other clocksources
can be better candidates but halt on suspend.

Currently, the timekeeping core only supports timing suspend using
CLOCK_SOURCE_SUSPEND_NONSTOP clocksources if that clocksource is the
current clocksource for timekeeping.

As a result, some architectures try to implement read_persistent_clock64()
using those non-stop clocksources, but isn't really ideal, which will
introduce more duplicate code. To fix this, provide logic to allow a
registered SUSPEND_NONSTOP clocksource, which isn't the current
clocksource, to be used to calculate the suspend time.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
[jstultz: minor tweaks to merge with previous resume changes]
Signed-off-by: John Stultz <john.stultz@linaro.org>

Currently, there exists a corner case assuming when there is
only one clocksource e.g RTC, and system failed to go to
suspend mode. While resume rtc_resume() injects the sleeptime
as timekeeping_rtc_skipresume() returned 'false' (default value
of sleeptime_injected) due to which we can see mismatch in
timestamps.

This issue can also come in a system where more than one
clocksource are present and very first suspend fails.

Success case:
------------
                                        {sleeptime_injected=false}
rtc_suspend() => timekeeping_suspend() => timekeeping_resume() =>

(sleeptime injected)
 rtc_resume()

Failure case:
------------
         {failure in sleep path} {sleeptime_injected=false}
rtc_suspend()     =>          rtc_resume()

{sleeptime injected again which was not required as the suspend failed}

Fix this by handling the boolean logic properly.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Originally-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>

Add 'const' to some function arguments and variables to make it easier
to read the code.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
[jstultz: Also fixup pre-existing checkpatch warnings for
 prototype arguments with no variable name]
Signed-off-by: John Stultz <john.stultz@linaro.org>

...instead of kstrtol with a dirty cast.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>

The 'ts' argument of process_adj_status() and process_adjtimex_modes()
is unused and can be safely removed.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>

The call to wake_up_nohz_cpu() is incorrectly indented. Remove the surplus TAB.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn>
Cc: john.stultz@linaro.org
Cc: sboyd@kernel.org
Cc: zhong.weidong@zte.com.cn
CC: Anna-Maria Gleixner <anna-maria@linutronix.de>
Link: https://lkml.kernel.org/r/1531721337-30284-1-git-send-email-wang.yi59@zte.com.cn

Merge branch 'fortglx/4.19/time' of https://git.linaro.org/people/john.stultz/linux into timers/core

Pull timekeeping updates from John Stultz:

  - Make the timekeeping update more precise when NTP frequency is set
    directly by updating the multiplier.

  - Adjust selftests

Using ktime_to_ns() is nice to help backports to stable kernels.

Having a typesafe function instead of a macro avoid stupid typos
and waste of time tracking these typos.
Reported-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lkml.kernel.org/r/20180711181641.10369-1-edumazet@google.com

  - Join split message for easier grepping,
  - Use pr_*() instead of printk*(),
  - Use %u to format unsigned cpu numbers.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20180712144118.8819-1-geert+renesas@glider.be

When the NTP frequency is set directly from userspace using the
ADJ_FREQUENCY or ADJ_TICK timex mode, immediately update the
timekeeper's multiplier instead of waiting for the next tick.

This removes a hidden non-deterministic delay in setting of the
frequency and allows an extremely tight control of the system clock
with update rates close to or even exceeding the kernel HZ.

The update is limited to archs using modern timekeeping
(!ARCH_USES_GETTIMEOFFSET).

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>

In the past we've warned when ADJ_OFFSET was in progress, usually
caused by ntpd or some other time adjusting daemon running in non
steady sate, which can cause the skew calculations to be
incorrect.

Thus, this patch checks to see if the clock was being adjusted
when we fail so that we don't cause false negatives.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Suggested-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
v2: Widened the checks to look for other clock adjustments that
    could happen, as suggested by Miroslav
v3: Fixed up commit message

Air Icy reported:

  UBSAN: Undefined behaviour in kernel/time/alarmtimer.c:811:7
  signed integer overflow:
  1529859276030040771 + 9223372036854775807 cannot be represented in type 'long long int'
  Call Trace:
   alarm_timer_nsleep+0x44c/0x510 kernel/time/alarmtimer.c:811
   __do_sys_clock_nanosleep kernel/time/posix-timers.c:1235 [inline]
   __se_sys_clock_nanosleep kernel/time/posix-timers.c:1213 [inline]
   __x64_sys_clock_nanosleep+0x326/0x4e0 kernel/time/posix-timers.c:1213
   do_syscall_64+0xb8/0x3a0 arch/x86/entry/common.c:290

alarm_timer_nsleep() uses ktime_add() to add the current time and the
relative expiry value. ktime_add() has no sanity checks so the addition
can overflow when the relative timeout is large enough.

Use ktime_add_safe() which has the necessary sanity checks in place and
limits the result to the valid range.

Fixes: 9a7adcf5 ("timers: Posix interface for alarm-timers")
Reported-by: Team OWL337 <icytxw@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1807020926360.1595@nanos.tec.linutronix.de

The posix timer overrun handling is broken because the forwarding functions
can return a huge number of overruns which does not fit in an int. As a
consequence timer_getoverrun(2) and siginfo::si_overrun can turn into
random number generators.

The k_clock::timer_forward() callbacks return a 64 bit value now. Make
k_itimer::ti_overrun[_last] 64bit as well, so the kernel internal
accounting is correct. 3Remove the temporary (int) casts.

Add a helper function which clamps the overrun value returned to user space
via timer_getoverrun(2) or siginfo::si_overrun limited to a positive value
between 0 and INT_MAX. INT_MAX is an indicator for user space that the
overrun value has been clamped.
Reported-by: Team OWL337 <icytxw@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Link: https://lkml.kernel.org/r/20180626132705.018623573@linutronix.de

The posix timer ti_overrun handling is broken because the forwarding
functions can return a huge number of overruns which does not fit in an
int. As a consequence timer_getoverrun(2) and siginfo::si_overrun can turn
into random number generators.

As a first step to address that let the timer_forward() callbacks return
the full 64 bit value.

Cast it to (int) temporarily until k_itimer::ti_overrun is converted to
64bit and the conversion to user space visible values is sanitized.
Reported-by: Team OWL337 <icytxw@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Link: https://lkml.kernel.org/r/20180626132704.922098090@linutronix.de

Pull btrfs fixes from David Sterba:
 "We have a few regression fixes for qgroup rescan status tracking and
  the vm_fault_t conversion that mixed up the error values"

* tag 'for-4.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Btrfs: fix mount failure when qgroup rescan is in progress
  Btrfs: fix regression in btrfs_page_mkwrite() from vm_fault_t conversion
  btrfs: quota: Set rescan progress to (u64)-1 if we hit last leaf

Pull vfs fix from Al Viro:
 "Followup to procfs-seq_file series this window"

This fixes a memory leak by making sure that proc seq files release any
private data on close.  The 'proc_seq_open' has to be properly paired
with 'proc_seq_release' that releases the extra private data.

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  proc: add proc_seq_release

Pull staging/IIO fixes from Greg KH:
 "Here are a few small staging and IIO driver fixes for 4.18-rc3.

  Nothing major or big, all just fixes for reported problems since
  4.18-rc1. All of these have been in linux-next this week with no
  reported problems"

* tag 'staging-4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: android: ion: Return an ERR_PTR in ion_map_kernel
  staging: comedi: quatech_daqp_cs: fix no-op loop daqp_ao_insn_write()
  iio: imu: inv_mpu6050: Fix probe() failure on older ACPI based machines
  iio: buffer: fix the function signature to match implementation
  iio: mma8452: Fix ignoring MMA8452_INT_DRDY
  iio: tsl2x7x/tsl2772: avoid potential division by zero
  iio: pressure: bmp280: fix relative humidity unit

Pull tty/serial fixes from Greg KH:
 "Here are five fixes for the tty core and some serial drivers.

  The tty core ones fix some security and other issues reported by the
  syzbot that I have taken too long in responding to (sorry Tetsuo!).

  The 8350 serial driver fix resolves an issue of devices that used to
  work properly stopping working as they shouldn't have been added to a
  blacklist.

  All of these have been in linux-next for a few days with no reported
  issues"

* tag 'tty-4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  vt: prevent leaking uninitialized data to userspace via /dev/vcs*
  serdev: fix memleak on module unload
  serial: 8250_pci: Remove stalled entries in blacklist
  n_tty: Access echo_* variables carefully.
  n_tty: Fix stall at n_tty_receive_char_special().

Pull USB fixes from Greg KH:
 "Here is a number of USB gadget and other driver fixes for 4.18-rc3.

  There's a bunch of them here, most of them being gadget driver and
  xhci host controller fixes for reported issues (as normal), but there
  are also some new device ids, and some fixes for the typec code.

  There is an acpi core patch in here that was acked by the acpi
  maintainer as it is needed for the typec fixes in order to properly
  solve a problem in that driver.

  All of these have been in linux-next this week with no reported
  issues"

* tag 'usb-4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits)
  usb: chipidea: host: fix disconnection detect issue
  usb: typec: tcpm: fix logbuffer index is wrong if _tcpm_log is re-entered
  typec: tcpm: Fix a msecs vs jiffies bug
  NFC: pn533: Fix wrong GFP flag usage
  usb: cdc_acm: Add quirk for Uniden UBC125 scanner
  staging/typec: fix tcpci_rt1711h build errors
  usb: typec: ucsi: Fix for incorrect status data issue
  usb: typec: ucsi: acpi: Workaround for cache mode issue
  acpi: Add helper for deactivating memory region
  usb: xhci: increase CRS timeout value
  usb: xhci: tegra: fix runtime PM error handling
  usb: xhci: remove the code build warning
  xhci: Fix kernel oops in trace_xhci_free_virt_device
  xhci: Fix perceived dead host due to runtime suspend race with event handler
  dwc2: gadget: Fix ISOC IN DDMA PID bitfield value calculation
  usb: gadget: dwc2: fix memory leak in gadget_init()
  usb: gadget: composite: fix delayed_status race condition when set_interface
  usb: dwc2: fix isoc split in transfer with no data
  usb: dwc2: alloc dma aligned buffer for isoc split in
  usb: dwc2: fix the incorrect bitmaps for the ports of multi_tt hub
  ...

Pull dma mapping fixlet from Christoph Hellwig:
 "Add a missing export required by riscv and unicore"

* tag 'dma-mapping-4.18-2' of git://git.infradead.org/users/hch/dma-mapping:
  swiotlb: export swiotlb_dma_ops

Pull parisc fixes and cleanups from Helge Deller:
 "Nothing exiting in this patchset, just

   - small cleanups of header files

   - default to 4 CPUs when building a SMP kernel

   - mark 16kB and 64kB page sizes broken

   - addition of the new io_pgetevents syscall"

* 'parisc-4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Build kernel without -ffunction-sections
  parisc: Reduce debug output in unwind code
  parisc: Wire up io_pgetevents syscall
  parisc: Default to 4 SMP CPUs
  parisc: Convert printk(KERN_LEVEL) to pr_lvl()
  parisc: Mark 16kB and 64kB page sizes BROKEN
  parisc: Drop struct sigaction from not exported header file

Pull ARM SoC fixes from Olof Johansson:
 "A smaller batch for the end of the week (let's see if I can keep the
  weekly cadence going for once).

  All medium-grade fixes here, nothing worrisome:

   - Fixes for some fairly old bugs around SD card write-protect
     detection and GPIO interrupt assignments on Davinci.

   - Wifi module suspend fix for Hikey.

   - Minor DT tweaks to fix inaccuracies for Amlogic platforms, one
     of which solves booting with third-party u-boot"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm64: dts: hikey960: Define wl1837 power capabilities
  arm64: dts: hikey: Define wl1835 power capabilities
  ARM64: dts: meson-gxl: fix Mali GPU compatible string
  ARM64: dts: meson-axg: fix ethernet stability issue
  ARM64: dts: meson-gx: fix ATF reserved memory region
  ARM64: dts: meson-gxl-s905x-p212: Add phy-supply for usb0
  ARM64: dts: meson: fix register ranges for SD/eMMC
  ARM64: dts: meson: disable sd-uhs modes on the libretech-cc
  ARM: dts: da850: Fix interrups property for gpio
  ARM: davinci: board-da850-evm: fix WP pin polarity for MMC/SD

Merge tag 'kbuild-fixes-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - introduce __diag_* macros and suppress -Wattribute-alias warnings
   from GCC 8

 - fix stack protector test script for x86_64

 - fix line number handling in Kconfig

 - document that '#' starts a comment in Kconfig

 - handle P_SYMBOL property in dump debugging of Kconfig

 - correct help message of LD_DEAD_CODE_DATA_ELIMINATION

 - fix occasional segmentation faults in Kconfig

* tag 'kbuild-fixes-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: loop boundary condition fix
  kbuild: reword help of LD_DEAD_CODE_DATA_ELIMINATION
  kconfig: handle P_SYMBOL in print_symbol()
  kconfig: document Kconfig source file comments
  kconfig: fix line numbers for if-entries in menu tree
  stack-protector: Fix test with 32-bit userland and CONFIG_64BIT=y
  powerpc: Remove -Wattribute-alias pragmas
  disable -Wattribute-alias warning for SYSCALL_DEFINEx()
  kbuild: add macro for controlling warnings to linux/compiler.h

Pull x86 fixes from Ingo Molnar:
 "The biggest diffstat comes from self-test updates, plus there's entry
  code fixes, 5-level paging related fixes, console debug output fixes,
  and misc fixes"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Clean up the printk()s in show_fault_oops()
  x86/mm: Drop unneeded __always_inline for p4d page table helpers
  x86/efi: Fix efi_call_phys_epilog() with CONFIG_X86_5LEVEL=y
  selftests/x86/sigreturn: Do minor cleanups
  selftests/x86/sigreturn/64: Fix spurious failures on AMD CPUs
  x86/entry/64/compat: Fix "x86/entry/64/compat: Preserve r8-r11 in int $0x80"
  x86/mm: Don't free P4D table when it is folded at runtime
  x86/entry/32: Add explicit 'l' instruction suffix
  x86/mm: Get rid of KERN_CONT in show_fault_oops()

Pull perf fixes from Ingo Molnar:
 "Tooling fixes mostly, plus a build warning fix"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
  perf/core: Move inline keyword at the beginning of declaration
  tools/headers: Pick up latest kernel ABIs
  perf tools: Fix crash caused by accessing feat_ops[HEADER_LAST_FEATURE]
  perf script: Fix crash because of missing evsel->priv
  perf script: Add missing output fields in a hint
  perf bench: Fix numa report output code
  perf stat: Remove duplicate event counting
  perf alias: Rebuild alias expression string to make it comparable
  perf alias: Remove trailing newline when reading sysfs files
  perf tools: Fix a clang 7.0 compilation error
  tools include uapi: Synchronize bpf.h with the kernel
  tools include uapi: Update if_link.h to pick IFLA_{BRPORT_ISOLATED,VXLAN_TTL_INHERIT}
  tools include powerpc: Update arch/powerpc/include/uapi/asm/unistd.h copy to get 'rseq' syscall
  perf tools: Update x86's syscall_64.tbl, adding 'io_pgetevents' and 'rseq'
  tools headers uapi: Synchronize drm/drm.h
  perf intel-pt: Fix packet decoding of CYC packets
  perf tests: Add valid callback for parse-events test
  perf tests: Add event parsing error handling to parse events test
  perf report powerpc: Fix crash if callchain is empty
  perf test session topology: Fix test on s390
  ...

Pull selinux fix from Paul Moore:
 "One fairly straightforward patch to fix a longstanding issue where a
  process could stall while accessing files in selinuxfs and block
  everyone else due to a held mutex.

  The patch passes all our tests and looks to apply cleanly to your
  current tree"

* tag 'selinux-pr-20180629' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: move user accesses in selinuxfs out of locked regions

Pull block fixes from Jens Axboe:
 "Small set of fixes for this series. Mostly just minor fixes, the only
  oddball in here is the sg change.

  The sg change came out of the stall fix for NVMe, where we added a
  mempool and limited us to a single page allocation. CONFIG_SG_DEBUG
  sort-of ruins that, since we'd need to account for that. That's
  actually a generic problem, since lots of drivers need to allocate SG
  lists. So this just removes support for CONFIG_SG_DEBUG, which I added
  back in 2007 and to my knowledge it was never useful.

  Anyway, outside of that, this pull contains:

   - clone of request with special payload fix (Bart)

   - drbd discard handling fix (Bart)

   - SATA blk-mq stall fix (me)

   - chunk size fix (Keith)

   - double free nvme rdma fix (Sagi)"

* tag 'for-linus-20180629' of git://git.kernel.dk/linux-block:
  sg: remove ->sg_magic member
  drbd: Fix drbd_request_prepare() discard handling
  blk-mq: don't queue more if we get a busy return
  block: Fix cloning of requests with a special payload
  nvme-rdma: fix possible double free of controller async event buffer
  block: Fix transfer when chunk sectors exceeds max

Pull powerpc fixes from Michael Ellerman:
 "Two regression fixes, and a new syscall wire-up:

   - A fix for the recent conversion to time64_t in the powermac RTC
     routines, which caused time to go backward.

   - Another fix for fallout from the split PMD PTL conversion.

   - Wire up the new io_pgetevents() syscall.

  Thanks to: Aneesh Kumar K.V, Arnd Bergmann, Breno Leitao, Mathieu
  Malaterre"

* tag 'powerpc-4.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/powermac: Fix rtc read/write functions
  powerpc/mm/32: Fix pgtable_page_dtor call
  powerpc: Wire up io_pgetevents

Merge tag 'davinci-fixes-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes

This fixes polarity of SD card write-protect pin on DA850 EVM
and fixes interrupt property for DA850 SoC GPIO as defined in
device-tree.

Both of these are not introduced with v4.18 merge but have
existed prior.

* tag 'davinci-fixes-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: dts: da850: Fix interrups property for gpio
  ARM: davinci: board-da850-evm: fix WP pin polarity for MMC/SD
Signed-off-by: Olof Johansson <olof@lixom.net>

ARM64: hisi fixes for 4.18

- Added power capabilities for the mmc host controller on the
  hikey and hikey960 boards to avoid broken wifi.

* tag 'hisi-fixes-for-4.18' of git://github.com/hisilicon/linux-hisi:
  arm64: dts: hikey960: Define wl1837 power capabilities
  arm64: dts: hikey: Define wl1835 power capabilities
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into fixes

Amlogic fixes for v4.18-rc
- minor 64-bit DT fixes

* tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM64: dts: meson-gxl: fix Mali GPU compatible string
  ARM64: dts: meson-axg: fix ethernet stability issue
  ARM64: dts: meson-gx: fix ATF reserved memory region
  ARM64: dts: meson-gxl-s905x-p212: Add phy-supply for usb0
  ARM64: dts: meson: fix register ranges for SD/eMMC
  ARM64: dts: meson: disable sd-uhs modes on the libretech-cc
Signed-off-by: Olof Johansson <olof@lixom.net>

Pull arm64 fixes from Catalin Marinas:

 - The alternatives patching code uses flush_icache_range() which itself
   uses alternatives. Change the code to use an unpatched variant of
   cache maintenance

 - Remove unnecessary ISBs from set_{pte,pmd,pud}

 - perf: xgene_pmu: Fix IOB SLOW PMU parser error

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Remove unnecessary ISBs from set_{pte,pmd,pud}
  arm64: Avoid flush_icache_range() in alternatives patching code
  drivers/perf: xgene_pmu: Fix IOB SLOW PMU parser error

Pull i2c fixes from Wolfram Sang:

 - a revert because of bugzilla #200045 (and some documentation about
   it)

 - another regression fix in the i2c-gpio driver

 - a leak fix for the i2c core

* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: gpio: initialize SCL to HIGH again
  i2c: smbus: kill memory leak on emulated and failed DMA SMBus xfers
  i2c: algos: bit: mention our experience about initial states
  Revert "i2c: algo-bit: init the bus to a known state"