- 14 May, 2019 3 commits
-
-
Ben Skeggs authored
HW has error checks in place which check that pixel depth is explicitly provided on DP, while HDMI has a "default" setting that we use. In multi-display configurations with identical modelines, but different protocols (HDMI + DP, in this case), it was possible for the DP head to get swapped to the head which previously drove the HDMI output, without updating HeadSetControlOutputResource(), triggering the error check and hanging the core update. Reported-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Accidentally introduced during Volta bring-up. Signed-off-by: -
Ben Skeggs authored
Cursor position updates were accidentally causing us to attempt to interlock window with window immediate, and without a matching window immediate update, NVDisplay could hang forever in some circumstances. Fixes suspend/resume on (at least) Quadro RTX4000 (TU104). Reported-by:
-
- 01 May, 2019 8 commits
-
-
Tobias Klausmann authored
On a failed resume we may experience unrecoverable errors. Plumb the error code through to actually let the driver fail. On a reverse-prime setup this helps the drm subsystem to at least recover the integrated gpu. This can especially happen with secboot timing out, leaving the hardware in a non-functioning state. Signed-off-by:
Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a nvkm_debug message. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Signed-off-by:
-
Lyude Paul authored
For a while, we've had the problem of i2c bus access not grabbing a runtime PM ref when it's being used in userspace by i2c-dev, resulting in nouveau spamming the kernel log with errors if anything attempts to access the i2c bus while the GPU is in runtime suspend. An example: [ 130.078386] nouveau 0000:01:00.0: i2c: aux 000d: begin idle timeout ffffffff Since the GPU is in runtime suspend, the MMIO region that the i2c bus is on isn't accessible. On x86, the standard behavior for accessing an unavailable MMIO region is to just return ~0. Except, that turned out to be a lie. While computers with a clean concious will return ~0 in this scenario, some machines will actually completely hang a CPU on certian bad MMIO accesses. This was witnessed with someone's Lenovo ThinkPad P50, where sensors-detect attempting to access the i2c bus while the GPU was suspended would result in a CPU hang: CPU: 5 PID: 12438 Comm: sensors-detect Not tainted 5.0.0-0.rc4.git3.1.fc30.x86_64 #1 Hardware name: LENOVO 20EQS64N17/20EQS64N17, BIOS N1EET74W (1.47 ) 11/21/2017 RIP: 0010:ioread32+0x2b/0x30 Code: 81 ff ff ff 03 00 77 20 48 81 ff 00 00 01 00 76 05 0f b7 d7 ed c3 48 c7 c6 e1 0c 36 96 e8 2d ff ff ff b8 ff ff ff ff c3 8b 07 <c3> 0f 1f 40 00 49 89 f0 48 81 fe ff ff 03 00 76 04 40 88 3e c3 48 RSP: 0018:ffffaac3c5007b48 EFLAGS: 00000292 ORIG_RAX: ffffffffffffff13 RAX: 0000000001111000 RBX: 0000000001111000 RCX: 0000043017a97186 RDX: 0000000000000aaa RSI: 0000000000000005 RDI: ffffaac3c400e4e4 RBP: ffff9e6443902c00 R08: ffffaac3c400e4e4 R09: ffffaac3c5007be7 R10: 0000000000000004 R11: 0000000000000001 R12: ffff9e6445dd0000 R13: 000000000000e4e4 R14: 00000000000003c4 R15: 0000000000000000 FS: 00007f253155a740(0000) GS:ffff9e644f600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005630d1500358 CR3: 0000000417c44006 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: g94_i2c_aux_xfer+0x326/0x850 [nouveau] nvkm_i2c_aux_i2c_xfer+0x9e/0x140 [nouveau] __i2c_transfer+0x14b/0x620 i2c_smbus_xfer_emulated+0x159/0x680 ? _raw_spin_unlock_irqrestore+0x1/0x60 ? rt_mutex_slowlock.constprop.0+0x13d/0x1e0 ? __lock_is_held+0x59/0xa0 __i2c_smbus_xfer+0x138/0x5a0 i2c_smbus_xfer+0x4f/0x80 i2cdev_ioctl_smbus+0x162/0x2d0 [i2c_dev] i2cdev_ioctl+0x1db/0x2c0 [i2c_dev] do_vfs_ioctl+0x408/0x750 ksys_ioctl+0x5e/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x60/0x1e0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f25317f546b Code: 0f 1e fa 48 8b 05 1d da 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ed d9 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffc88caab68 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00005630d0fe7260 RCX: 00007f25317f546b RDX: 00005630d1598e80 RSI: 0000000000000720 RDI: 0000000000000003 RBP: 00005630d155b968 R08: 0000000000000001 R09: 00005630d15a1da0 R10: 0000000000000070 R11: 0000000000000246 R12: 00005630d1598e80 R13: 00005630d12f3d28 R14: 0000000000000720 R15: 00005630d12f3ce0 watchdog: BUG: soft lockup - CPU#5 stuck for 23s! [sensors-detect:12438] Yikes! While I wanted to try to make it so that accessing an i2c bus on nouveau would wake up the GPU as needed, airlied pointed out that pretty much any usecase for userspace accessing an i2c bus on a GPU (mainly for the DDC brightness control that some displays have) is going to only be useful while there's at least one display enabled on the GPU anyway, and the GPU never sleeps while there's displays running. Since teaching the i2c bus to wake up the GPU on userspace accesses is a good deal more difficult than it might seem, mostly due to the fact that we have to use the i2c bus during runtime resume of the GPU, we instead opt for the easiest solution: don't let userspace access i2c busses on the GPU at all while it's in runtime suspend. Changes since v1: * Also disable i2c busses that run over DP AUX Signed-off-by:
-
Bjorn Helgaas authored
Commit 3a6536c5 ("drm/nouveau: Intercept ACPI_VIDEO_NOTIFY_PROBE") added a definition of ACPI_VIDEO_NOTIFY_PROBE because <acpi/video.h> didn't supply one. Later, commit eff4a751 ("ACPI / video: Move ACPI_VIDEO_NOTIFY_* defines to acpi/video.h") moved ACPI_VIDEO_NOTIFY_PROBE and other definitions to <acpi/video.h>, so the copy in nouveau_display.c is now unnecessary. Remove the unnecessary definition from nouveau_display.c. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> CC: Hans de Goede <hdegoede@redhat.com> Acked-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Jon Derrick authored
If the BAR initialization failed it may leave the vmm structure in an unitialized state, leading to a null-pointer-dereference when the vmm is dereferenced during teardown. Signed-off-by:
Jon Derrick <jonathan.derrick@intel.com> Signed-off-by:
-
Jon Derrick authored
If the BAR is zero size, it indicates it was never successfully mapped. Ensure that the BAR is valid during initialization before attempting to use it. Signed-off-by:
-
Jon Derrick authored
If the BAR is zero size, it indicates it was never successfully mapped. Ensure that the BAR is valid during initialization before attempting to use it. Signed-off-by:
-
Jon Derrick authored
Check bar1's new vmm creation return value for errors. Signed-off-by:
-
- 26 Apr, 2019 2 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2019-04-25' of git://anongit.freedesktop.org/drm/drm-intel into drm-next - Use after free fix during GEM_CREATE when reporting back object size - Icelake DP register programming order fix Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190425061312.GA2919@jlahtine-desk.ger.corp.intel.com
-
Dave Airlie authored
Merge tag 'drm-misc-next-fixes-2019-04-24' of git://anongit.freedesktop.org/drm/drm-misc into drm-next - fb_helper: Fix NULL deref in legacy drivers (Noralf) - leases: Ensure lessees can't connect to objects outside their perview (Daniel) - leases: Enforce that lessees hold the lease for implicitly set planes (Daniel) - leases: A few non-functional cleanups (Daniel) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
-
- 24 Apr, 2019 27 commits
-
-
Noralf Trønnes authored
Non-atomic drivers like ast doesn't have connector->state set resulting in a NULL pointer deref: [ 29.609593] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 [ 29.609619] Call Trace: [ 29.609630] ? drm_helper_probe_single_connector_modes+0x27f/0x680 [ 29.609640] drm_setup_crtcs+0x431/0xd80 [drm_kms_helper] [ 29.753065] __drm_fb_helper_initial_config_and_unlock+0x6f/0x6a0 [ 29.753160] ? drm_modeset_unlock_all+0x31/0x50 [drm] [ 29.765758] ast_fbdev_init+0xa8/0xc0 [ast] [ 29.765762] ast_driver_load.cold.7+0x2b3/0xe11 [ast] [ 29.765775] drm_dev_register+0x111/0x150 [drm] Fix by bailing out if the driver does not support atomic modesetting. Fixes: 09ded8af ("drm/i915/fbdev: Move intel_fb_initial_config() to fbdev helper") Reported-by:
Thomas Zimmermann <tzimmermann@suse.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by:
-
Daniel Vetter authored
With the previous patch drm_crtc_find will return NULL when the crtc isn't in our lease, which will then disable the plane/connector. No longer an issue since the lessor can't escape their lease terms anymore, but not quite great semantics yet either. Catch this and return -EACCES, so that at least evil test cases have a better chance of making sure the kernel works correctly. Reviewed-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190228144910.26488-8-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
We need this to make sure lessees can only connect their plane/connectors to crtc objects they own. And note that this is irrespective of whether the lessor is atomic or not, lessor cannot prevent lessees from enabling atomic. Cc: stable@vger.kernel.org Cc: Keith Packard <keithp@keithp.com> Reviewed-by:
-
Daniel Vetter authored
If userspace doesn't enable universal planes, then we automatically add the primary and cursor planes. But for universal userspace there's no such check (and maybe we only want to give the lessee one plane, maybe not even the primary one), hence we need to check for the implied plane. v2: don't forget setcrtc ioctl. v3: Still allow disabling of the crtc in SETCRTC. Cc: stable@vger.kernel.org Cc: Keith Packard <keithp@keithp.com> Reviewed-by:
Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by:
-
Daniel Vetter authored
The lessor is invariant over a lifetime of a lease, we don't have to grab any locks for that. Speeds up the common case of not being a lease. Cc: Keith Packard <keithp@keithp.com> Reviewed-by:
-
Daniel Vetter authored
We kzalloc. Cc: Keith Packard <keithp@keithp.com> Reviewed-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:
-
Daniel Vetter authored
We disallow subleasing, so no point checking whether the master holds all the leases - it will. Spotted while typing exhaustive igt coverage for all these corner cases. Cc: Keith Packard <keithp@keithp.com> Reviewed-by:
-
Daniel Vetter authored
Not exactly sure what's the aim here, but the canonical nil object has id == 0, we don't use negative object ids for anything. Plus all object_id are valided by the object_idr, there's nothing we need to do on top of that ENOENT check a bit further down. Spotted while typing exhaustive igt coverage for all these corner-cases. Cc: Keith Packard <keithp@keithp.com> Reviewed-by:
-
git://people.freedesktop.org/~airlied/linuxDaniel Vetter authored
Pull legacy cleanups from Dave. Signed-off-by:
-
Dave Airlie authored
This code moved in here in master, so revert it the same way. This is the same revert as 9fa24625 ("Revert "drm/i915/fbdev: Actually configure untiled displays"") in drm-fixes. Signed-off-by:
-
Imre Deak authored
Fix the order of lane, port parameters passed to the register macro. Note that this was already partly fixed by commit 37fc7845 ("drm/i915: Call MG_DP_MODE() macro with the right parameters order") While at it simplify things by using the macro directly instead of an unnecessary redirection via an array. v2: - Add a note the commit message about simplifying things. (José) Fixes: 58106b7d ("drm/i915: Make MG PHY macros semantically consistent") Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Aditya Swarup <aditya.swarup@intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190419071026.32370-1-imre.deak@intel.com (cherry picked from commit 9c11b121) Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Chris Wilson authored
We have to avoid chasing after a userspace race! <3>[ 473.114328] BUG: KASAN: use-after-free in i915_gem_create+0x1d2/0x1f0 [i915] <3>[ 473.114389] Read of size 8 at addr ffff88815bf1d840 by task gem_flink_race/1541 <4>[ 473.114464] CPU: 1 PID: 1541 Comm: gem_flink_race Tainted: G U 5.1.0-rc4-g7d07e025e786-kasan_88+ #1 <4>[ 473.114469] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./J4205-ITX, BIOS P1.10 09/29/2016 <4>[ 473.114474] Call Trace: <4>[ 473.114488] dump_stack+0x7c/0xbb <4>[ 473.114612] ? i915_gem_create+0x1d2/0x1f0 [i915] <4>[ 473.114621] print_address_description+0x65/0x270 <4>[ 473.114728] ? i915_gem_create+0x1d2/0x1f0 [i915] <4>[ 473.114839] ? i915_gem_create+0x1d2/0x1f0 [i915] <4>[ 473.114848] kasan_report+0x149/0x18d <4>[ 473.114962] ? i915_gem_create+0x1d2/0x1f0 [i915] <4>[ 473.115069] i915_gem_create+0x1d2/0x1f0 [i915] <4>[ 473.115176] ? i915_gem_object_create.part.28+0x4b0/0x4b0 [i915] <4>[ 473.115289] ? i915_gem_dumb_create+0x1a0/0x1a0 [i915] <4>[ 473.115297] drm_ioctl_kernel+0x192/0x260 <4>[ 473.115306] ? drm_ioctl_permit+0x280/0x280 <4>[ 473.115326] drm_ioctl+0x67c/0x960 <4>[ 473.115438] ? i915_gem_dumb_create+0x1a0/0x1a0 [i915] <4>[ 473.115448] ? drm_getstats+0x20/0x20 <4>[ 473.115459] ? __lock_acquire+0xa66/0x3fe0 <4>[ 473.115474] ? _raw_spin_unlock_irqrestore+0x39/0x60 <4>[ 473.115485] ? debug_object_active_state+0x2ea/0x4e0 <4>[ 473.115496] ? debug_show_all_locks+0x2d0/0x2d0 <4>[ 473.115513] do_vfs_ioctl+0x18d/0xfa0 <4>[ 473.115522] ? check_flags.part.27+0x440/0x440 <4>[ 473.115532] ? ioctl_preallocate+0x1a0/0x1a0 <4>[ 473.115547] ? __fget+0x2ac/0x410 <4>[ 473.115561] ? __ia32_sys_dup3+0xb0/0xb0 <4>[ 473.115569] ? rwlock_bug.part.0+0x90/0x90 <4>[ 473.115590] ksys_ioctl+0x35/0x70 <4>[ 473.115597] ? lockdep_hardirqs_off+0x1cb/0x2b0 <4>[ 473.115608] __x64_sys_ioctl+0x6a/0xb0 <4>[ 473.115614] ? lockdep_hardirqs_on+0x342/0x590 <4>[ 473.115623] do_syscall_64+0x97/0x400 <4>[ 473.115633] entry_SYSCALL_64_after_hwframe+0x49/0xbe <4>[ 473.115641] RIP: 0033:0x7fce590d55d7 <4>[ 473.115649] Code: b3 66 90 48 8b 05 b1 48 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 81 48 2d 00 f7 d8 64 89 01 48 <4>[ 473.115655] RSP: 002b:00007fce4d525ba8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 <4>[ 473.115662] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fce590d55d7 <4>[ 473.115667] RDX: 00007fce4d525c10 RSI: 00000000c010645b RDI: 0000000000000007 <4>[ 473.115672] RBP: 00007fce4d525c10 R08: 00007fce4d526700 R09: 00007fce4d526700 <4>[ 473.115677] R10: 0000000000000054 R11: 0000000000000246 R12: 00000000c010645b <4>[ 473.115682] R13: 0000000000000007 R14: 0000000000000000 R15: 00007ffe0e4a7450 <3>[ 473.115731] Allocated by task 1541: <4>[ 473.115766] kmem_cache_alloc+0xce/0x290 <4>[ 473.115895] i915_gem_object_create.part.28+0x1c/0x4b0 [i915] <4>[ 473.116000] i915_gem_create+0xe3/0x1f0 [i915] <4>[ 473.116008] drm_ioctl_kernel+0x192/0x260 <4>[ 473.116013] drm_ioctl+0x67c/0x960 <4>[ 473.116020] do_vfs_ioctl+0x18d/0xfa0 <4>[ 473.116026] ksys_ioctl+0x35/0x70 <4>[ 473.116032] __x64_sys_ioctl+0x6a/0xb0 <4>[ 473.116038] do_syscall_64+0x97/0x400 <4>[ 473.116044] entry_SYSCALL_64_after_hwframe+0x49/0xbe <3>[ 473.116071] Freed by task 1542: <4>[ 473.116101] kmem_cache_free+0xb7/0x2f0 <4>[ 473.116205] __i915_gem_free_objects+0x7d4/0xe10 [i915] <4>[ 473.116311] i915_gem_create_ioctl+0xaa/0xd0 [i915] <4>[ 473.116318] drm_ioctl_kernel+0x192/0x260 <4>[ 473.116323] drm_ioctl+0x67c/0x960 <4>[ 473.116330] do_vfs_ioctl+0x18d/0xfa0 <4>[ 473.116335] ksys_ioctl+0x35/0x70 <4>[ 473.116341] __x64_sys_ioctl+0x6a/0xb0 <4>[ 473.116347] do_syscall_64+0x97/0x400 <4>[ 473.116354] entry_SYSCALL_64_after_hwframe+0x49/0xbe Testcase: igt/gem_flink_race/flink_close Fixes: e163484a ("drm/i915: Update size upon return from GEM_CREATE") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190417132507.27133-1-chris@chris-wilson.co.uk (cherry picked from commit 99534023) Signed-off-by:
-
Dave Airlie authored
This should help with some of the lifetime issues, and move us away from load/unload. Acked-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Dave Airlie authored
This just makes it easier to later embed drm into udl. Reviewed-by:
-
Dave Airlie authored
Merge tag 'exynos-drm-next-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next Log cleanups - Correct the use of log macro in error case. - Drop unnecessary messages. - Replace DRM_ERROR/DEBUG with DRM_DEV_ERROR/DEBUG. - Print out debug messages with correct device name in vidi and ipp drivers. One trivial cleanup - Just fix checkpatch error, "foo* bar" to "foo *bar" in g2d driver. Signed-off-by:
-
Dave Airlie authored
This removes these unless legacy is enabled. The lock count init is unneeded anyways since it's kzalloc. Reviewed-by:
-
Dave Airlie authored
This places a bunch of the legacy members of drm_device into only being there when legacy is enabled. Reviewed-by:
-
Dave Airlie authored
If you don't want the legacy drivers, then lets get rid of all the legacy codepaths from the core module. This drop the size of drm.ko for me by about 10%. 380515 7422 4192 392129 5fbc1 ../../drm-next-build/drivers/gpu/drm/drm.ko 351736 7298 4192 363226 58ada ../../drm-next-build/drivers/gpu/drm/drm.ko v2: drop drm_lock as well, fix some DMA->DRM typos v3: avoid ifdefs in mainline code v4: rework ioctl defs v4.1: fix nouveau Kconfig Reviewed-by:
-
Dave Airlie authored
This could probably be done with Kconfig somehow, but I failed in my first 2 minute attempt. v2: use Kconfig better. Reviewed-by:
-
Dave Airlie authored
This moves the legacy dev reinit into the legacy misc file. Reviewed-by:
-
Dave Airlie authored
This introduces drm_legacy_misc.c as a place for some misc legacy code, eventually I want to give the option to remove this from the build. Reviewed-by:
-
Dave Airlie authored
This allows them to be removed later. Reviewed-by:
-
Dave Airlie authored
This makes it easier to remove legacy code later. v2: move check into lock file as well. Reviewed-by:
-
Dave Airlie authored
Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Dave Airlie authored
This makes it easier to clean this up later. Reviewed-by:
-
Dave Airlie authored
This isn't used by drivers, and won't be in the future. Reviewed-by:
-
Dave Airlie authored
There was a nouveau DDX that relied on legacy context ioctls to work, but we fixed it years ago, give distros that have a modern DDX the option to break the uAPI and close the mess of holes that legacy context support is. Full context of the story: commit 0e975980 Author: Peter Antoine <peter.antoine@intel.com> Date: Tue Jun 23 08:18:49 2015 +0100 drm: Turn off Legacy Context Functions The context functions are not used by the i915 driver and should not be used by modeset drivers. These driver functions contain several bugs and security holes. This change makes these functions optional can be turned on by a setting, they are turned off by default for modeset driver with the exception of the nouvea driver that may require them with an old version of libdrm. The previous attempt was commit 7c510133 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Aug 8 15:41:21 2013 +0200 drm: mark context support as a legacy subsystem but this had to be reverted commit c21eb21c Author: Dave Airlie <airlied@redhat.com> Date: Fri Sep 20 08:32:59 2013 +1000 Revert "drm: mark context support as a legacy subsystem" v2: remove returns from void function, and formatting (Daniel Vetter) v3: - s/Nova/nouveau/ in the commit message, and add references to the previous attempts - drop the part touching the drm hw lock, that should be a separate patch. Signed-off-by: Peter Antoine <peter.antoine@intel.com> (v2) Cc: Peter Antoine <peter.antoine@intel.com> (v2) Reviewed-by:
Peter Antoine <peter.antoine@intel.com> Signed-off-by:
-
