- 17 Jul, 2020 2 commits
-
-
Sudeep Holla authored
Kbuild test robot reports the following sparse warning: drivers/firmware/arm_scmi/clock.c:142:21: sparse: Using plain integer as NULL pointer Use NULL pointer instead of integer 0 for rate pointer and fix the warning. Link: https://lore.kernel.org/r/20200717140405.17905-1-sudeep.holla@arm.comReported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'renesas-drivers-for-v5.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/drivers Renesas driver updates for v5.9 - Add core support for the new RZ/G2H (R8A774E1) SoC, including System Controller (SYSC) and Reset (RST) support. * tag 'renesas-drivers-for-v5.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: soc: renesas: rcar-rst: Add support for RZ/G2H soc: renesas: Identify RZ/G2H soc: renesas: Add Renesas R8A774E1 config option soc: renesas: rcar-sysc: Add r8a774e1 support clk: renesas: Add r8a774e1 CPG Core Clock Definitions dt-bindings: power: Add r8a774e1 SYSC power domain definitions Link: https://lore.kernel.org/r/20200717112427.26032-3-geert+renesas@glider.beSigned-off-by:
-
- 16 Jul, 2020 1 commit
-
-
Arnd Bergmann authored
Merge tag 'v5.8-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers add new functions to cmdq helper functions - assign value to register - export finalize function and don't call explicitely from flush async - set specific event * tag 'v5.8-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: soc: mediatek: cmdq: add set event function soc: mediatek: cmdq: export finalize function soc: mediatek: cmdq: add assign function Link: https://lore.kernel.org/r/01399fb4-b2d0-e41b-dfd9-f2deba0ef651@gmail.comSigned-off-by:
-
- 14 Jul, 2020 1 commit
-
-
Arnd Bergmann authored
Merge tag 'scmi-updates-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers ARM SCMI/SCPI updates for v5.9 The main addition for this time is the support for platform notifications. SCMI protocol specification allows the platform to signal events to the interested agents via notification messages. We are adding support for the dispatch and delivery of such notifications to the interested users inside the kernel. Other than that, there are minor changes like checking and using the fast_switch capability quering the firmware instead of doing it unconditionally(using polling mode transfer), cosmetic trace update, use of HAVE_ARM_SMCCC_DISCOVERY instead of ARM_PSCI_FW and a fix in scmi clock registration logic for all the clocks with discrete rates. * tag 'scmi-updates-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scmi: Remove fixed size fields from reports/scmi_event_header firmware: arm_scmi: Remove unneeded __packed attribute firmware: arm_scmi: Remove zero-length array in SCMI notifications firmware: arm_scmi: Provide a missing function param description clk: scmi: Fix min and max rate when registering clocks with discrete rates firmware: arm_scmi: Keep the discrete clock rates sorted firmware: arm_scmi: Add base notifications support firmware: arm_scmi: Add reset notifications support firmware: arm_scmi: Add sensor notifications support firmware: arm_scmi: Add perf notifications support firmware: arm_scmi: Add power notifications support firmware: arm_scmi: Enable notification core firmware: arm_scmi: Add notification dispatch and delivery firmware: arm_scmi: Add notification callbacks-registration firmware: arm_scmi: Add notification protocol-registration firmware: arm_scmi: Fix SCMI genpd domain probing firmware: arm_scmi: Use HAVE_ARM_SMCCC_DISCOVERY instead of ARM_PSCI_FW cpufreq: arm_scmi: Set fast_switch_possible conditionally firmware: arm_scmi: Add fast_switch_possible() interface firmware: arm_scmi: Use signed integer to report transfer status Link: https://lore.kernel.org/r/20200713161410.12324-1-sudeep.holla@arm.comSigned-off-by:
-
- 13 Jul, 2020 13 commits
-
-
Arnd Bergmann authored
Merge tag 'optee-bus-for-v5.9' of git://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers Enable multi-stage OP-TEE bus enumeration Probes drivers on the OP-TEE bus in two steps. First for drivers which do not depend on tee-supplicant. After tee-supplicant has been started probe the devices which do depend on tee-supplicant. Also introduces driver which uses an OP-TEE based fTPM Trusted Application depends on tee-supplicant NV RAM implementation based on RPMB secure storage. * tag 'optee-bus-for-v5.9' of git://git.linaro.org/people/jens.wiklander/linux-tee: tpm_ftpm_tee: register driver on TEE bus optee: enable support for multi-stage bus enumeration optee: use uuid for sysfs driver entry Link: https://lore.kernel.org/r/20200710085230.GA1312913@jadeSigned-off-by:
-
Cristian Marussi authored
Event reports are used to convey information describing events to the registered user-callbacks: they are necessarily derived from the underlying raw SCMI events' messages but they are not meant to expose or directly mirror any of those messages data layout, which belong to the protocol layer. Using fixed size types for report fields, mirroring messages structure, is at odd with this: get rid of them using more generic, equivalent, typing. Substitute scmi_event_header fixed size fields with generic types too and shuffle around fields definitions to minimize implicit padding while adapting involved functions. Link: https://lore.kernel.org/r/20200710133919.39792-3-cristian.marussi@arm.comSigned-off-by:
Cristian Marussi <cristian.marussi@arm.com> Signed-off-by:
-
Cristian Marussi authored
Remove __packed attribute from struct scmi_event_header. Link: https://lore.kernel.org/r/20200710133919.39792-2-cristian.marussi@arm.comSigned-off-by:
-
Cristian Marussi authored
Substitute zero-length array defined in scmi_base_error_report with a flexible length array definition. Link: https://lore.kernel.org/r/20200710133919.39792-1-cristian.marussi@arm.comSigned-off-by:
-
Sudeep Holla authored
gcc as well as clang now produce warnings for missing kerneldoc function parameter. Fix the following W=1 kernel build warning: drivers/firmware/arm_scmi/smc.c:32: warning: Function parameter or member 'shmem_lock' not described in 'scmi_smc' Link: https://lore.kernel.org/r/20200709153155.22573-1-sudeep.holla@arm.comReported-by:
-
Sudeep Holla authored
Currently we are not initializing the scmi clock with discrete rates correctly. We fetch the min_rate and max_rate value only for clocks with ranges and ignore the ones with discrete rates. This will lead to wrong initialization of rate range when clock supports discrete rate. Fix this by using the first and the last rate in the sorted list of the discrete clock rates while registering the clock. Link: https://lore.kernel.org/r/20200709081705.46084-2-sudeep.holla@arm.com Fixes: 6d6a1d82 ("clk: add support for clocks provided by SCMI") Reviewed-by:
Stephen Boyd <sboyd@kernel.org> Reported-and-tested-by:
Dien Pham <dien.pham.ry@renesas.com> Signed-off-by:
-
Marian-Cristian Rotariu authored
Add support for RZ/G2H (R8A774E1) to the R-Car RST driver. Signed-off-by:
Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/1594138692-16816-8-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by:
Geert Uytterhoeven <geert+renesas@glider.be>
-
Marian-Cristian Rotariu authored
This patch adds support for identifying the RZ/G2H (r8a774e1) SoC. Signed-off-by:
-
Marian-Cristian Rotariu authored
Add configuration option for the RZ/G2H (R8A774E1) SoC. Signed-off-by:
-
Marian-Cristian Rotariu authored
Add support for RZ/G2H (R8A774E1) SoC power areas to the R-Car SYSC driver. Signed-off-by:
-
Geert Uytterhoeven authored
Renesas RZ/G2H DT Binding Definitions Clock and Power Domain definitions for the Renesas RZ/G2H (R8A774E1) SoC, shared by driver and DT source files.
-
Marian-Cristian Rotariu authored
Add all RZ/G2H Clock Pulse Generator Core Clock Outputs, as listed in Table 11.2 ("List of Clocks [RZ/G2H]") of the RZ/G2H Hardware User's Manual. Signed-off-by: -
Marian-Cristian Rotariu authored
This patch adds power domain indices for the RZ/G2H (r8a774e1) SoC. Signed-off-by:
-
- 10 Jul, 2020 4 commits
-
-
Sudeep Holla authored
Instead of relying on the firmware to keep the clock rates sorted, let us sort the list. This is not essential for clock layer but it helps to find the min and max rates easily from the list. Link: https://lore.kernel.org/r/20200709081705.46084-1-sudeep.holla@arm.com Fixes: 5f6c6430 ("firmware: arm_scmi: add initial support for clock protocol") Reported-and-tested-by:
-
Maxim Uvarov authored
OP-TEE based fTPM Trusted Application depends on tee-supplicant to provide NV RAM implementation based on RPMB secure storage. So this dependency can be resolved via TEE bus where we only invoke fTPM driver probe once fTPM device is registered on the bus which is only true after the tee-supplicant is up and running. Additionally, TEE bus provides auto device enumeration. Signed-off-by:
Maxim Uvarov <maxim.uvarov@linaro.org> Suggested-by:
Sumit Garg <sumit.garg@linaro.org> Suggested-by:
Arnd Bergmann <arnd@linaro.org> Reviewed-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by:
Jens Wiklander <jens.wiklander@linaro.org>
-
Maxim Uvarov authored
Some drivers (like ftpm) can operate only after tee-supplicant runs because of tee-supplicant provides things like storage services (rpmb, shm). This patch splits probe of non tee-supplicant dependable drivers to the early stage, and after tee-supplicant run probe other drivers. Signed-off-by:
-
Maxim Uvarov authored
With the evolving use-cases for TEE bus, now it's required to support multi-stage enumeration process. But using a simple index doesn't suffice this requirement and instead leads to duplicate sysfs entries. So instead switch to use more informative device UUID for sysfs entry like: /sys/bus/tee/devices/optee-ta-<uuid> Signed-off-by:
-
- 06 Jul, 2020 10 commits
-
-
Arnd Bergmann authored
Merge tag 'soc-attr-updates-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers SoC attributes update for v5.9 1. Addition of ARM SMCCC ARCH_SOC_ID support 2. Usage of the custom soc attribute groups already supported in the infrastucture instead of device_create_file which eliminates the need for any cleanup when soc is unregistered 3. Minor clean up switching to use standard DEVICE_ATTR_RO() instead of direct __ATTR * tag 'soc-attr-updates-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: smccc: Add ARCH_SOC_ID support ARM: OMAP2: Use custom soc attribute group instead of device_create_file ARM: OMAP2: Switch to use DEVICE_ATTR_RO() soc: ux500: Use custom soc attribute group instead of device_create_file soc: ux500: Switch to use DEVICE_ATTR_RO() soc: integrator: Use custom soc attribute group instead of device_create_file soc: integrator: Switch to use DEVICE_ATTR_RO() soc: realview: Use custom soc attribute group instead of device_create_file soc: realview: Switch to use DEVICE_ATTR_RO() Link: https://lore.kernel.org/r/20200706165312.40697-1-sudeep.holla@arm.comSigned-off-by:
-
Sudeep Holla authored
SMCCC v1.2 adds a new optional function SMCCC_ARCH_SOC_ID to obtain a SiP defined SoC identification value. Add support for the same. Also using the SoC bus infrastructure, let us expose the platform specific SoC atrributes under sysfs. There are various ways in which it can be represented in shortened form for efficiency and ease of parsing for userspace. The chosen form is described in the ABI document. Link: https://lore.kernel.org/r/20200625095939.50861-1-sudeep.holla@arm.com Cc: Etienne Carriere <etienne.carriere@st.com> Reviewed-by:
Steven Price <steven.price@arm.com> Signed-off-by:
-
Sudeep Holla authored
Commit c31e7312 ("base: soc: Handle custom soc information sysfs entries") introduced custom soc attribute group in soc_device_attribute structure but there are no users treewide. While trying to understand the motivation and tried to use it, it was found lot of existing custom attributes can moved to use it instead of device_create_file. Though most of these never remove/cleanup the custom attribute as they never call soc_device_unregister, using these custom attribute group eliminate the need for any cleanup as the driver infrastructure will take care of that. Let us remove device_create_file and start using the custom attribute group in soc_device_attribute. Link: https://lore.kernel.org/r/20200523170859.50003-9-sudeep.holla@arm.com Cc: Tony Lindgren <tony@atomide.com> Cc: linux-omap@vger.kernel.org Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Sudeep Holla authored
Move device attributes to DEVICE_ATTR_RO() as that would make things a lot more "obvious" what is happening over the existing __ATTR usage. Link: https://lore.kernel.org/r/20200523170859.50003-8-sudeep.holla@arm.com Cc: Tony Lindgren <tony@atomide.com> Cc: linux-omap@vger.kernel.org Reviewed-by:
-
Sudeep Holla authored
Commit c31e7312 ("base: soc: Handle custom soc information sysfs entries") introduced custom soc attribute group in soc_device_attribute structure but there are no users treewide. While trying to understand the motivation and tried to use it, it was found lot of existing custom attributes can moved to use it instead of device_create_file. Though most of these never remove/cleanup the custom attribute as they never call soc_device_unregister, using these custom attribute group eliminate the need for any cleanup as the driver infrastructure will take care of that. Let us remove device_create_file and start using the custom attribute group in soc_device_attribute. Link: https://lore.kernel.org/r/20200523170859.50003-7-sudeep.holla@arm.com Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Sudeep Holla authored
Move device attributes to DEVICE_ATTR_RO() as that would make things a lot more "obvious" what is happening over the existing __ATTR usage. Link: https://lore.kernel.org/r/20200523170859.50003-6-sudeep.holla@arm.com Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
-
Sudeep Holla authored
Commit c31e7312 ("base: soc: Handle custom soc information sysfs entries") introduced custom soc attribute group in soc_device_attribute structure but there are no users treewide. While trying to understand the motivation and tried to use it, it was found lot of existing custom attributes can moved to use it instead of device_create_file. Though most of these never remove/cleanup the custom attribute as they never call soc_device_unregister, using these custom attribute group eliminate the need for any cleanup as the driver infrastructure will take care of that. Let us remove device_create_file and start using the custom attribute group in soc_device_attribute. Link: https://lore.kernel.org/r/20200523170859.50003-5-sudeep.holla@arm.com Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
-
Sudeep Holla authored
Move device attributes to DEVICE_ATTR_RO() as that would make things a lot more "obvious" what is happening over the existing __ATTR usage. Link: https://lore.kernel.org/r/20200523170859.50003-4-sudeep.holla@arm.com Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
-
Sudeep Holla authored
Commit c31e7312 ("base: soc: Handle custom soc information sysfs entries") introduced custom soc attribute group in soc_device_attribute structure but there are no users treewide. While trying to understand the motivation and tried to use it, it was found lot of existing custom attributes can moved to use it instead of device_create_file. Though most of these never remove/cleanup the custom attribute as they never call soc_device_unregister, using these custom attribute group eliminate the need for any cleanup as the driver infrastructure will take care of that. Let us remove device_create_file and start using the custom attribute group in soc_device_attribute. Link: https://lore.kernel.org/r/20200523170859.50003-3-sudeep.holla@arm.com Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
-
Sudeep Holla authored
Move device attributes to DEVICE_ATTR_RO() as that would make things a lot more "obvious" what is happening over the existing __ATTR usage. Link: https://lore.kernel.org/r/20200523170859.50003-2-sudeep.holla@arm.com Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
-
- 01 Jul, 2020 9 commits
-
-
Cristian Marussi authored
Make SCMI base protocol register with the notification core. Link: https://lore.kernel.org/r/20200701155348.52864-10-cristian.marussi@arm.comReviewed-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Cristian Marussi authored
Make SCMI reset protocol register with the notification core. Link: https://lore.kernel.org/r/20200701155348.52864-9-cristian.marussi@arm.comReviewed-by:
-
Cristian Marussi authored
Make SCMI sensor protocol register with the notification core. Link: https://lore.kernel.org/r/20200701155348.52864-8-cristian.marussi@arm.comReviewed-by:
-
Cristian Marussi authored
Make SCMI perf protocol register with the notification core. Link: https://lore.kernel.org/r/20200701155348.52864-7-cristian.marussi@arm.comReviewed-by:
-
Cristian Marussi authored
Make SCMI power protocol register with the notification core. Link: https://lore.kernel.org/r/20200701155348.52864-6-cristian.marussi@arm.comReviewed-by:
-
Cristian Marussi authored
Initialize and enable SCMI notifications core support during bus/driver probe phase, so that protocols can start registering their supported events during their initialization. Link: https://lore.kernel.org/r/20200701155348.52864-5-cristian.marussi@arm.comReviewed-by:
-
Cristian Marussi authored
Add the core SCMI notifications dispatch and delivery support logic which is able to dispatch well-known received events from the Rx interrupt handler to the dedicated deferred worker. From there, it will deliver the events to the registered users' callbacks. Dispatch and delivery support is just added here, still not enabled. Link: https://lore.kernel.org/r/20200701155348.52864-4-cristian.marussi@arm.comReviewed-by:
-
Cristian Marussi authored
Add the core SCMI notifications callbacks-registration support: allow users to register their own callbacks against the desired events. Whenever a registration request is issued against a still non existent event, mark such request as pending for later processing, in order to account for possible late initializations of SCMI Protocols associated to loadable drivers. Link: https://lore.kernel.org/r/20200701155348.52864-3-cristian.marussi@arm.comReviewed-by:
-
Cristian Marussi authored
Add the core SCMI notifications protocol-registration support: allow protocols to register their own set of supported events, during their initialization phase. Notification core can track multiple platform instances by their handles. Link: https://lore.kernel.org/r/20200701155348.52864-2-cristian.marussi@arm.comReviewed-by:
-
