- 26 Oct, 2021 28 commits
-
-
Naohiro Aota authored
We are passing too many variables as it is from btrfs_reserve_extent() to find_free_extent(). The next commit will add min_alloc_size to ffe_ctl, and that means another pass-through argument. Take this opportunity to move ffe_ctl one level up and drop the redundant arguments. Signed-off-by:
Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Naohiro Aota authored
Activate new block group at btrfs_make_block_group(). We do not check the return value. If failed, we can try again later at the actual extent allocation phase. Signed-off-by:
-
Naohiro Aota authored
Activate a block group when trying to allocate an extent from it. We check read-only case and no space left case before trying to activate a block group not to consume the number of active zones uselessly. Signed-off-by:
-
Naohiro Aota authored
Load activeness of underlying zones of a block group. When underlying zones are active, we add the block group to the fs_info->zone_active_bgs list. Signed-off-by:
-
Naohiro Aota authored
Add zone_is_active flag to btrfs_block_group. This flag indicates the underlying zones are all active. Such zone active block groups are tracked by fs_info->active_bg_list. btrfs_dev_{set,clear}_active_zone() take responsibility for the underlying device part. They set/clear the bitmap to indicate zone activeness and count the number of zones we can activate left. btrfs_zone_{activate,finish}() take responsibility for the logical part and the list management. In addition, btrfs_zone_finish() wait for any writes on it and send REQ_OP_ZONE_FINISH to the zone. Signed-off-by: -
Naohiro Aota authored
We will use a block group's physical location to track active zones and finish fully written zones in the following commits. Since the zone activation is done in the extent allocation context which already holding the tree locks, we can't query the chunk tree for the physical locations. So, copy the location info into a block group and use it for activation. Signed-off-by:
-
Naohiro Aota authored
The ZNS specification defines a limit on the number of zones that can be in the implicit open, explicit open or closed conditions. Any zone with such condition is defined as an active zone and correspond to any zone that is being written or that has been only partially written. If the maximum number of active zones is reached, we must either reset or finish some active zones before being able to chose other zones for storing data. Load queue_max_active_zones() and track the number of active zones left on the device. Signed-off-by:
-
Naohiro Aota authored
If there is no more space left for a new superblock in a superblock zone, then it is better to ZONE_FINISH the zone and frees up the active zone count. Since btrfs_advance_sb_log() can now issue REQ_OP_ZONE_FINISH, we also need to convert it to return int for the error case. Signed-off-by:
-
Naohiro Aota authored
sb_write_pointer() returns the write position of next superblock. For READ, we need a previous location. When the pointer is at the head, the previous one is the last one of the other zone. Calculate the last one's position from zone capacity. Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
-
Naohiro Aota authored
We cannot write beyond zone capacity. So, we should consider a zone as "full" when the write pointer goes beyond capacity - the size of super info. Also, take this opportunity to replace a subtle duplicated code with a loop and fix a typo in comment. Reviewed-by:
-
Naohiro Aota authored
With the introduction of zone capacity, the range [capacity, length] is always zone unusable. Counting this region as a reclaim target will cause reclaiming too early. Reclaim block groups based on bytes that can be usable after resetting. Reviewed-by:
-
Naohiro Aota authored
Now that we introduced capacity in a block group, we need to calculate free space using the capacity instead of the length. Thus, bytes we account capacity - alloc_pointer as free, and account bytes [capacity, length] as zone unusable. Reviewed-by:
-
Naohiro Aota authored
btrfs_free_excluded_extents() is not neccessary for btrfs_calc_zone_unusable() and it makes btrfs_calc_zone_unusable() difficult to reuse. Move it out and call btrfs_free_excluded_extents() in proper context. Reviewed-by:
-
Naohiro Aota authored
The ZNS specification introduces the concept of a Zone Capacity. A zone capacity is an additional per-zone attribute that indicates the number of usable logical blocks within each zone, starting from the first logical block of each zone. It is always smaller or equal to the zone size. With the SINGLE profile, we can set a block group's "capacity" as the same as the underlying zone's Zone Capacity. We will limit the allocation not to exceed in a following commit. Reviewed-by:
-
Qu Wenruo authored
With the new infrastructure which has taken subpage into consideration, now we should be safe to allow defrag to work for subpage case. Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
-
Qu Wenruo authored
Now the old infrastructure can all be removed, defrag Signed-off-by:
-
Qu Wenruo authored
The function defrag_one_cluster() is able to defrag one range well enough, we only need to do preparation for it, including: - Clamp and align the defrag range - Exclude invalid cases - Proper inode locking The old infrastructures will not be removed in this patch, as it would be too noisy to review. Signed-off-by:
-
Qu Wenruo authored
This new helper, defrag_one_cluster(), will defrag one cluster (at most 256K): - Collect all initial targets - Kick in readahead when possible - Call defrag_one_range() on each initial target With some extra range clamping. - Update @sectors_defragged parameter This involves one behavior change, the defragged sectors accounting is no longer as accurate as old behavior, as the initial targets are not consistent. We can have new holes punched inside the initial target, and we will skip such holes later. But the defragged sectors accounting doesn't need to be that accurate anyway, thus I don't want to pass those extra accounting burden into defrag_one_range(). Signed-off-by:
-
Qu Wenruo authored
A new helper, defrag_one_range(), is introduced to defrag one range. This function will mostly prepare the needed pages and extent status for defrag_one_locked_target(). As we can only have a consistent view of extent map with page and extent bits locked, we need to re-check the range passed in to get a real target list for defrag_one_locked_target(). Since defrag_collect_targets() will call defrag_lookup_extent() and lock extent range, we also need to teach those two functions to skip extent lock. Thus new parameter, @locked, is introduced to skip extent lock if the caller has already locked the range. Signed-off-by:
-
Qu Wenruo authored
A new helper, defrag_one_locked_target(), introduced to do the real part of defrag. The caller needs to ensure both page and extents bits are locked, and no ordered extent exists for the range, and all writeback is finished. The core defrag part is pretty straight-forward: - Reserve space - Set extent bits to defrag - Update involved pages to be dirty Signed-off-by:
-
Qu Wenruo authored
Introduce a helper, defrag_collect_targets(), to collect all possible targets to be defragged. This function will not consider things like max_sectors_to_defrag, thus caller should be responsible to ensure we don't exceed the limit. This function will be the first stage of later defrag rework. Signed-off-by:
-
Qu Wenruo authored
In cluster_pages_for_defrag(), we have complex code block inside one for() loop. The code block is to prepare one page for defrag, this will ensure: - The page is locked and set up properly. - No ordered extent exists in the page range. - The page is uptodate. This behavior is pretty common and will be reused by later defrag rework. So factor out the code into its own helper, defrag_prepare_one_page(), for later usage, and cleanup the code by a little. Signed-off-by:
-
Qu Wenruo authored
When testing subpage defrag support, I always find some strange inode nbytes error, after a lot of debugging, it turns out that defrag_lookup_extent() is using PAGE_SIZE as size for lookup_extent_mapping(). Since lookup_extent_mapping() is calling __lookup_extent_mapping() with @strict == 1, this means any extent map smaller than one page will be ignored, prevent subpage defrag to grab a correct extent map. There are quite some PAGE_SIZE usage in ioctl.c, but most of them are correct usages, and can be one of the following cases: - ioctl structure size check We want ioctl structure to be contained inside one page. - real page operations The remaining cases in defrag_lookup_extent() and check_defrag_in_cache() will be addressed in this patch. Signed-off-by:
-
Qu Wenruo authored
In function cluster_pages_for_defrag() we have a window where we unlock page, either start the ordered range or read the content from disk. When we re-lock the page, we need to make sure it still has the correct page->private for subpage. Thus add the extra PagePrivate check here to handle subpage cases properly. Signed-off-by:
-
Qu Wenruo authored
Currently btrfs_defrag_file() accepts both "struct inode" and "struct file" as parameter. We can easily grab "struct inode" from "struct file" using file_inode() helper. The reason why we need "struct file" is just to re-use its f_ra. Change this to pass "struct file_ra_state" parameter, so that it's more clear what we really want. Since we're here, also add some comments on the function btrfs_defrag_file(). Reviewed-by:
-
Anand Jain authored
btrfs_chunk_readonly() checks if the given chunk is writeable. It returns 1 for readonly, and 0 for writeable. So the return argument type bool shall suffice instead of the current type int. Also, rename btrfs_chunk_readonly() to btrfs_chunk_writeable() as we check if the bg is writeable, and helps to keep the logic at the parent function simpler to understand. Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
-
Sidong Yang authored
Fix a warning reported by smatch that ret could be returned without initialized. The dedupe operations are supposed to to return 0 for a 0 length range but the caller does not pass olen == 0. To keep this behaviour and also fix the warning initialize ret to 0. Reviewed-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
Sidong Yang <realwakka@gmail.com> Reviewed-by:
-
Qu Wenruo authored
Currently we use u16 bitmap to make 4k sectorsize work for 64K page size. But this u16 bitmap is not large enough to contain larger page size like 128K, nor is space efficient for 16K page size. To handle both cases, here we pack all subpage bitmaps into a larger bitmap, now btrfs_subpage::bitmaps[] will be the ultimate bitmap for subpage usage. Each sub-bitmap will has its start bit number recorded in btrfs_subpage_info::*_start, and its bitmap length will be recorded in btrfs_subpage_info::bitmap_nr_bits. All subpage bitmap operations will be converted from using direct u16 operations to bitmap operations, with above *_start calculated. For 64K page size with 4K sectorsize, this should not cause much difference. While for 16K page size, we will only need 1 unsigned long (u32) to store all the bitmaps, which saves quite some space. Furthermore, this allows us to support larger page size like 128K and 258K. Signed-off-by:
-
- 25 Oct, 2021 12 commits
-
-
Qu Wenruo authored
Currently we use fixed size u16 bitmap for subpage bitmap. This is fine for 4K sectorsize with 64K page size. But for 4K sectorsize and larger page size, the bitmap is too small, while for smaller page size like 16K, u16 bitmaps waste too much space. Here we introduce a new helper structure, btrfs_subpage_bitmap_info, to record the proper bitmap size, and where each bitmap should start at. By this, we can later compact all subpage bitmaps into one u32 bitmap. This patch is the first step. Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
-
Qu Wenruo authored
The existing calling convention of btrfs_alloc_subpage() is pretty awful. Change it to a more common pattern by returning struct btrfs_subpage directly and let the caller to determine if the call succeeded. Reviewed-by:
-
Qu Wenruo authored
There are two call sites of btrfs_alloc_subpage(): - btrfs_attach_subpage() We have ensured sectorsize is smaller than PAGE_SIZE - alloc_extent_buffer() We call btrfs_alloc_subpage() unconditionally. The alloc_extent_buffer() forces us to check the sectorsize size against page size inside btrfs_alloc_subpage(). Since the function name, btrfs_alloc_subpage(), already indicates it should only get called for subpage cases, do the check in alloc_extent_buffer() and add an ASSERT() in btrfs_alloc_subpage(). Reviewed-by:
-
Su Yue authored
Update it since commit 944d3f9f ("btrfs: switch seed device to list api") did conversion from fs_devices::seed to fs_devices::seed_list. Reviewed-by:
Su Yue <l@damenly.su> Reviewed-by:
-
Anand Jain authored
There is no need for the variable ret after d66105cfa873 ("btrfs: allocate btrfs_ioctl_quota_rescan_args on stack"), remove it. Signed-off-by: -
Marcos Paulo de Souza authored
The out label is being overused, we can simply return if the condition permits. No functional changes. Reviewed-by:
Marcos Paulo de Souza <mpdesouza@suse.com> Reviewed-by:
-
Nikolay Borisov authored
The user facing function used to allocate new chunks is btrfs_chunk_alloc, unfortunately there is yet another similar sounding function - btrfs_alloc_chunk. This creates confusion, especially since the latter function can be considered "private" in the sense that it implements the first stage of chunk creation and as such is called by btrfs_chunk_alloc. To avoid the awkwardness that comes with having similarly named but distinctly different in their purpose function rename btrfs_alloc_chunk to btrfs_create_chunk, given that the main purpose of this function is to orchestrate the whole process of allocating a chunk - reserving space into devices, deciding on characteristics of the stripe size and creating the in-memory structures. Reviewed-by:
-
Linus Torvalds authored
-
Matthew Wilcox (Oracle) authored
Commit 11086054 ("mm/secretmem: use refcount_t instead of atomic_t") attempted to fix the problem of secretmem_users wrapping to zero and allowing suspend once again. But it was reverted in commit 87066fdd ("Revert 'mm/secretmem: use refcount_t instead of atomic_t'") because of the problems it caused - a refcount_t was not semantically the right type to use. Instead prevent secretmem_users from wrapping to zero by forbidding new users if the number of users has wrapped from positive to negative. This stops a long way short of reaching the necessary 4 billion users where it wraps to zero again, so there's no need to be clever with special anti-wrap types or checking the return value from atomic_inc(). Signed-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Jordy Zomer <jordy@pwning.systems> Cc: Kees Cook <keescook@chromium.org>, Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Commit efafec27 ("spi: Fix tegra20 build with CONFIG_PM=n") already fixed the build without PM support once. There was an alternative fix by Guenter in commit 2bab9409 ("spi: tegra20-slink: Declare runtime suspend and resume functions conditionally"), and Mark then merged the two correctly in ffb1e76f ("Merge tag 'v5.15-rc2' into spi-5.15"). But for some inexplicable reason, Mark then merged things _again_ in commit 59c4e190 ("Merge tag 'v5.15-rc3' into spi-5.15"), and screwed things up at that point, and the __maybe_unused attribute on tegra_slink_runtime_resume() went missing. Reinstate it, so that alpha (and other architectures without PM support) builds cleanly again. Btw, this is another prime example of how random back-merges are not good. Just don't do them. Subsystem developers should not merge my tree in any normal circumstances. Both of those merge commits pointed to above are bad: even the one that got the merge result right doesn't even mention _why_ it was done, and the one that got it wrong is obviously broken. Reported-by:
Guenter Roeck <linux@roeck-us.net> Cc: Mark Brown <broonie@kernel.org> Signed-off-by:
-
git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: - Fix clang-related relocation warning in futex code - Fix incorrect use of get_kernel_nofault() - Fix bad code generation in __get_user_check() when kasan is enabled - Ensure TLB function table is correctly aligned - Remove duplicated string function definitions in decompressor - Fix link-time orphan section warnings - Fix old-style function prototype for arch_init_kprobes() - Only warn about XIP address when not compile testing - Handle BE32 big endian for keystone2 remapping * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9148/1: handle CONFIG_CPU_ENDIAN_BE32 in arch/arm/kernel/head.S ARM: 9141/1: only warn about XIP address when not compile testing ARM: 9139/1: kprobes: fix arch_init_kprobes() prototype ARM: 9138/1: fix link warning with XIP + frame-pointer ARM: 9134/1: remove duplicate memcpy() definition ARM: 9133/1: mm: proc-macros: ensure *_tlb_fns are 4B aligned ARM: 9132/1: Fix __get_user_check failure with ARM KASAN images ARM: 9125/1: fix incorrect use of get_kernel_nofault() ARM: 9122/1: select HAVE_FUTEX_CMPXCHG
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libataLinus Torvalds authored
Pull libata fix from Damien Le Moal: "A single fix in this pull request addressing an invalid error code return in the sata_mv driver (from Zheyu)" * tag 'libata-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: sata_mv: Fix the error handling of mv_chip_id()
-
