- 12 Sep, 2009 40 commits
-
-
hermann pitton authored
With the recent improvements we don't need to probe anymore, if we know the i2c address of the receiver. The address of the receiver for the remote with the gray buttons is not confirmed anywhere, but it is very unlikely to see it on something else. We want to have that information anyway. BTW, those remaining still probing, please join. Signed-off-by:
hermann pitton <hermann-pitton@arcor.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Oliver Neukum authored
This patch removes an unneeded power management primitive. Power management is automatically enabled as probe ends. Signed-off-by:
Oliver Neukum <oliver@neukum.org> Signed-off-by:
-
Oldřich Jedlička authored
There are several reasons: - SAA7133/35 uses DDEP (DemDec Easy Programming mode), which works in 32kHz only - SAA7134 for TV mode uses DemDec mode (32kHz) - Radio works in 32kHz only - When recording 48kHz from Line1/Line2, switching of capture source to TV means switching to 32kHz without any frequency translation Signed-off-by:
Oldřich Jedlička <oldium.pro@seznam.cz> Acked-by:
-
Dmitry Torokhov authored
I just happen to peek inside the PWC driver and did not like what I saw there. Please consider applying the patch below. Signed-off-by: -
Dmitri Belimov authored
Add config of RDS part for the BeholdTV tuners. Signed-off-by:
Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by:
-
Dmitri Belimov authored
Fix error for AC-3 control of the 6752HS MPEG-2 coder. Signed-off-by:
-
Igor M. Liplianin authored
It does matter to set explicitly gpio0 value in cx88_board structure for TBS 8920 card. Signed-off-by:
Igor M. Liplianin <liplianin@me.by> Signed-off-by:
-
Aleksandr V. Piskunov authored
Makes zl10353 a bit more DVB API compliant: FE_READ_UNCORRECTED_BLOCKS - keep a counter of UNC blocks FE_GET_FRONTEND - return last set frequency instead of zero Signed-off-by:
Aleksandr V. Piskunov <alexandr.v.piskunov@gmail.com> Signed-off-by:
-
Julia Lawall authored
The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d but is perhaps more readable. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ @depends on haskernel@ expression x,__divisor; @@ - (((x) + ((__divisor) / 2)) / (__divisor)) + DIV_ROUND_CLOSEST(x,__divisor) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Henrik Kurelid authored
The AVC protocol uses the same command for tuning and PID filtering and since dvb-core uses a software zigzagging to do automatic retuning this could cause all PID filters to be cleared. PID filter information is now included in all DSD commands to the card. Background: There is a problem in the firedtv driver that causes recordings to stop if the SW zigzag algorithm in dvb-core kicks in with a retune after the application has set up the PID filters. Since tuning and setting PID filters uses the same AVC command (DSD) and only the replace subfunction is supported by the card, it is not possible to do a retune without setting the PID filters. This means that the PID filtering has to be sent in each tune. This problem applies to C and T cards since S and S2 cards tune using a vendor specific command. The patch corrects the problem by sending the PID list in each tune. I have tested it on my T card with a good result. How to trigger problem: Zap to a channel and output AV to a file, e.g. "tzap -c channels.conf SVT1 -r -o SVT1.ts". After a short while, pull the antenna cable from the card. The lock on the channel will disappear and the TS file will stop increasing in size. Wait a couple of seconds. Replug the cable again. You will get a lock on the channel again, but the TS file will never increase in size agains sinze no PIDS are filtered. Tested with kaffeine with DVB-T and DVB-C: Fixes retuning after antenna was plugged out and back in with DVB-T. Does not fix this with DVB-C, but also doesn't regress on DVB-C. Signed-off-by:
Henrik Kurelid <henrik@kurelid.se> Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by:
-
Julian Scheel authored
Attached is a patch which fixes tuning to low frequency channels with stb0899+tda8261 cards like the KNC TV-Station DVB-S2. The cause of the issue was a broken if construct, which should have been an if/else if, so that the setting for the lowest matching frequency is applied. Without this patch for example tuning to "arte" on Astra 19.2, 10744MHz SR22000 failed most times and when it failed the communication between driver and tda8261 was completely broken. This problem disappears with the attached patch. Signed-off-by:
Julian Scheel <julian@jusst.de> Signed-off-by:
-
Mart Raudsepp authored
Add new USB ID (1b80:e400) for KWorld PlusTV Dual DVB-T Stick (DVB-T 399U). The model number on the devices sticker label is "KW-DVB-T 399UR". Signed-off-by:
Mart Raudsepp <mart.raudsepp@artecdesign.ee> Acked-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Mauro Carvalho Chehab authored
These changes were a direct result of using a semantic patch More information can be found at http://www.emn.fr/x-info/coccinelle/ [mchehab@redhat.com: fix a merge conflict] Signed-off-by:
Stoyan Gaydarov <sgayda2@uiuc.edu> Signed-off-by:
-
Julia Lawall authored
It seems from other code that it is the dst_type field rather than the type_flags field that contains values of the form DST_TYPE_IS... The type_flags field contains values of the form DST_TYPE_HAS... The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ struct dst_state E; @@ ( *E.type_flags == \( DST_TYPE_IS_SAT\|DST_TYPE_IS_TERR\|DST_TYPE_IS_CABLE\|DST_TYPE_IS_ATSC \) | *E.type_flags != \( DST_TYPE_IS_SAT\|DST_TYPE_IS_TERR\|DST_TYPE_IS_CABLE\|DST_TYPE_IS_ATSC \) ) // </smpl> Cc: Manu Abraham <abraham.manu@gmail.com> Signed-off-by:
-
Nam Phạm Thành authored
This patch adds support for Humax/Coex DVB-T USB Stick 2.0 High Speed which is a very popular tuner sold in Vietnam. Tested with at least 3 tuners. Cc: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by:
Pham Thanh Nam <phamthanhnam.ptn@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
It were using 7 spaces instead of tab for indent. Cc: Janne Grunau <j@jannau.net> Signed-off-by: -
Mauro Carvalho Chehab authored
It were using 7 spaces instead of tab for indent. Cc: Erik Andren <erik.andren@gmail.com> Signed-off-by: -
Mauro Carvalho Chehab authored
It were using 7 spaces instead of tab for indent. Signed-off-by: -
Mauro Carvalho Chehab authored
The changeset 0b17d0ed that aded ASUSTeK P7131 Analog were using 7 spaces instead of tab, probably due to some bad cut-and-paste. Signed-off-by:
-
Mauro Carvalho Chehab authored
On VIDEO_M52790 and USB_GSPCA_SN9C20X, instead of tab, it were using 7 whitespaces at the beginning, probably due to some cut-and-paste trouble. Signed-off-by: -
Andrzej Hajda authored
Patch solves problem of missed keystrokes on some remote controls, as reported on http://bugzilla.kernel.org/show_bug.cgi?id=9637 . Signed-off-by:
Andrzej Hajda <andrzej.hajda@wp.pl> Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Igor M. Liplianin authored
Add Compro VideoMate S350 DVB-S driver. The card uses zl10313, zl10039, saa7130 integrated circuits. Signed-off-by:
-
Igor M. Liplianin authored
The card includes Intel ce5039(Zarlink zl10039) tuner and Intel ce6313 (Zarlink zl10313) demod. Signed-off-by:
-
Igor M. Liplianin authored
The code from Jan D. Louw with some minor changes. http://article.gmane.org/gmane.linux.drivers.dvb/38163 Tested with TeVii S630 DVB-S USB card by me (Igor) Signed-off-by:
-
Theodore Kilgore authored
Signed-off-by:
Theodore Kilgore <kilgota@auburn.edu> Signed-off-by:
Jean-Francois Moine <moinejf@free.fr> Signed-off-by:
-
Hans Verkuil authored
Thanks to Robert P.J. Day for finding this. Thanks-to: Robert P.J. Day <rpjday@crashcourse.ca> Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Devin Heitmueller authored
Add support for the remote control that comes with the Cinergy Hybrid T USB XS Thanks to Jelle de Jong for providing sample hardware to test with. Cc: Jelle de Jong <jelledejong@powercraft.nl> Signed-off-by:
Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by:
-
Vlastimil Labsky authored
I updated and simplyfied patch from Zbynek Hrabovsky for recent kernel. It enables autodetection of card, sound in analog TV , sound in FM radio and switching between antenna and cable RF input. Radio tuner still doesn't work, I don't even know how it works. Some guys wrote me that FM radio works with TV tuner used instead of radio part (symlink video0 -> radio0). Cc: Gerd Knorr <kraxel@bytesex.org> Signed-off-by:
Vlastimil Labsky <vlasta.labsky@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by:
-
Roel Kluin authored
Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
Douglas Schilling Landgraf authored
Fixed eeprom hash table Signed-off-by:
-
Hans Verkuil authored
do_div requires an u64 as the first argument, not a s64. Signed-off-by:
Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
Mike Isely <isely@pobox.com> Signed-off-by:
-
David T.L. Wong authored
Use unified lgs8gxx frontend instead of reverse engineered lgs8gl5 frontend. After this patch, lgs8gl5 frontend could be mark as deprecated. Future development should base on unified lgs8gxx frontend. Signed-off-by:
David T.L. Wong <davidtlwong@gmail.com> Signed-off-by:
-
Julia Lawall authored
Error handling code following a kmalloc should free the allocated data. Signed-off-by:
Erik Andrén <erik.andren@gmail.com> Signed-off-by:
-
hermann pitton authored
We have support for radio on saa7133/35/31e cards with tda8290/8275(a) and 5.5MHz ceramic filter on the bridge chips since a while. It was previously not tested, if this card supports it too, but the old "ghost" radio with wrong filters doesn't work anymore. Thanks go to Pham Thanh Nam and Laszlo Kustan for reporting it working on that input. Signed-off-by:
-
Beholder Intl. Ltd. Dmitry Belimov authored
Define correct tuner in config. Radio now works fine Signed-off-by:
-
Tobias Lorenz authored
The structure and comments of the I2C part have been adopted to fit to the USB part. Some additional cleanups and precisements have been made to the version detection and checking functionality to clearly separate HW/SW/FW version. Signed-off-by:
Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by:
-
Joonyoung Shim authored
This patch supports i2c interface of si470x. The i2c specific part exists in radio-si470x-i2c.c file and the common part uses radio-si470x-common.c file. The '#if defined' is inserted inevitably because of parts used only si470x usb in the common file. The current driver version doesn't support the RDS. Signed-off-by:
Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by:
-
Joonyoung Shim authored
The si470x_disconnect_check is function to check disconnect state of radio in common file. The function is implemented in each interface file. Signed-off-by:
-
