- 09 Jan, 2020 1 commit
-
-
Olivier Moysan authored
In current driver, locks can be taken as follows: - Register access: take a lock on regmap config and then on clock. - Master clock provider: take a lock on clock and then on regmap config. This can lead to the circular locking summarized below. Remove peripheral clock management through regmap framework, and manage peripheral clock in driver instead. On register access, lock on clock is taken first, which allows to avoid possible locking issue. [ 6696.561513] ====================================================== [ 6696.567670] WARNING: possible circular locking dependency detected [ 6696.573842] 4.19.49 #866 Not tainted [ 6696.577397] ------------------------------------------------------ [ 6696.583566] pulseaudio/6439 is trying to acquire lock: [ 6696.588697] 87b0a25b (enable_lock){..-.}, at: clk_enable_lock+0x64/0x128 [ 6696.595377] [ 6696.595377] but task is already holding lock: [ 6696.601197] d858f825 (stm32_sai_sub:1342:(sai->regmap_config)->lock){....} ... [ 6696.812513] Possible unsafe locking scenario: [ 6696.812513] [ 6696.818418] CPU0 CPU1 [ 6696.822935] ---- ---- [ 6696.827451] lock(stm32_sai_sub:1342:(sai->regmap_config)->lock); [ 6696.833618] lock(enable_lock); [ 6696.839350] lock(stm32_sai_sub:1342: (sai->regmap_config)->lock); [ 6696.848035] lock(enable_lock); Fixes: 03e78a24 ("ASoC: stm32: sai: add h7 support") Signed-off-by:Olivier Moysan <olivier.moysan@st.com> Link: https://lore.kernel.org/r/20200109083254.478-1-olivier.moysan@st.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 07 Jan, 2020 1 commit
-
-
Takashi Iwai authored
When an ASoC driver with pcm_destruct component ops is freed before the PCM object instantiation (e.g. deferring the probe), it hits an Oops at snd_soc_pcm_component_free() that calls the pcm_destruct ops unconditionally. Fix it by adding a NULL-check of rtd->pcm before calling callbacks. Fixes: c64bfc90 ("ASoC: soc-core: add new pcm_construct/pcm_destruct") Reported-by:
Matthias Brugger <matthias.bgg@gmail.com> Tested-by:
Ben Ho <ben.ho@mediatek.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20200107070956.15807-1-tiwai@suse.deSigned-off-by:
-
- 06 Jan, 2020 2 commits
-
-
Hans de Goede authored
When a quirk for the Irbis NB41 netbook was added, to override the defaults for this device, I forgot to add/keep the BYT_CHT_ES8316_SSP0 part of the defaults, completely breaking audio on this netbook. This commit adds the BYT_CHT_ES8316_SSP0 flag to the Irbis NB41 netbook quirk, making audio work again. Cc: stable@vger.kernel.org Cc: russianneuromancer@ya.ru Fixes: aa2ba991 ("ASoC: Intel: bytcht_es8316: Add quirk for Irbis NB41 netbook") Reported-and-tested-by: russianneuromancer@ya.ru Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200106113903.279394-1-hdegoede@redhat.comSigned-off-by:
-
Dmitry Osipenko authored
The rt5640->jack is NULL if jack is already disabled at the time of driver's module unloading. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20200106014707.11378-1-digetx@gmail.comSigned-off-by:
-
- 03 Jan, 2020 1 commit
-
-
Arnd Bergmann authored
On non-x86, the new driver results in a build failure: sound/soc/intel/boards/cml_rt1011_rt5682.c:14:10: fatal error: asm/cpu_device_id.h: No such file or directory The asm/cpu_device_id.h header is not actually needed here, so don't include it. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
-
- 24 Dec, 2019 9 commits
-
-
Daniel Baluta authored
dsp_box is used to keep DSP initiated messages. The value of dsp_offset is set by the DSP with the first message, so we need a way to bootstrap it in order to get the first message. We do this by setting the correct default dsp_box offset which on i.MX8 is not zero. Very interesting is why it has worked until now. On i.MX8, DSP communicates with ARM core using a shared SDRAM memory area. Actually, there are two shared areas: * SDRAM0 - starting at 0x92400000, size 0x800000 * SDRAM1 - starting at 0x92C00000, size 0x800000 SDRAM0 keeps the data sections, starting with .rodata. By chance fw_ready structure was placed at the beginning of .rodata. dsp_box_base is defined as SDRAM0 + dsp_box_offset and it is placed at the beginning of SDRAM1 (dsp_box_offset should be 0x800000). But because it is zero initialized by default it points to SDRAM0 where by chance the fw_ready was placed in the SOF firmware. Anyhow, SOF commit 7466bee378dd811b ("clk: make freq arrays constant") fw_ready is no longer at the beginning of SDRAM0 and everything shows how lucky we were until now. Fix this by properly setting the default dsp_box offset. Fixes: 202acc56 ("ASoC: SOF: imx: Add i.MX8 HW support") Signed-off-by:Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by:
-
Dragos Tarcatu authored
remove_link() is currently calling snd_soc_remove_dai_link() after it has already freed the memory for the link name. But this is later read from snd_soc_get_pcm_runtime() causing a KASAN use-after-free warning. Reorder the cleanups to fix this issue. Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
Dragos Tarcatu <dragos_tarcatu@mentor.com> Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/20191204210447.11701-4-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Chuhong Yuan authored
The driver forgets to call pm_runtime_disable in probe failure and remove. Add the missed calls to fix it. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Link: https://lore.kernel.org/r/20191203111303.12933-1-hslester96@gmail.comSigned-off-by:
-
Olivier Moysan authored
Changing input state in iec capture control is not safe, as the pin state may be changed concurrently by ASoC framework. Remove pin state handling in iec capture control. Note: This introduces a restriction on capture control, when pin sleep state is defined in device tree. In this case channel status can be captured only when an audio stream capture is active. Fixes: f68c2a68 ("ASoC: stm32: spdifrx: add power management") Signed-off-by:
-
Olivier Moysan authored
When snd_pcm_stop() is called in interrupt routine, substream context may have already been released. Add protection on substream context. Fixes: 03e4d5d5 ("ASoC: stm32: Add SPDIFRX support") Signed-off-by:
-
Olivier Moysan authored
In current spdifrx driver locks may be requested as follows: - request lock on iec capture control, when starting synchronization. - request lock in interrupt context, when spdifrx stop is called from IRQ handler. Take lock with IRQs disabled, to avoid the possible deadlock. Lockdep report: [ 74.278059] ================================ [ 74.282306] WARNING: inconsistent lock state [ 74.290120] -------------------------------- ... [ 74.314373] CPU0 [ 74.314377] ---- [ 74.314381] lock(&(&spdifrx->lock)->rlock); [ 74.314396] <Interrupt> [ 74.314400] lock(&(&spdifrx->lock)->rlock); Fixes: 03e4d5d5 ("ASoC: stm32: Add SPDIFRX support") Signed-off-by:
-
Takashi Iwai authored
The error path of soc_new_pcm_runtime() invokes soc_free_pcm_runtime() that may cause a few problems. First off, it calls list_del() for rtd->list that may not be initialized. Similarly, snd_soc_pcm_component_free() traverses over the component list that may not be initialized, either. Such access to the uninitialized list head would lead to either a BUG_ON() or a memory corruption. This patch fixes the access to uninitialized list heads by initializing the list heads properly at the beginning before those error paths. Signed-off-by:
-
Daniel Baluta authored
When converting a normal link to a DPCM link we need to set dpcm_playback / dpcm_capture otherwise playback/capture streams will not be created resulting in errors like this: [ 36.039111] sai1-wm8960-hifi: ASoC: no backend playback stream Fixes: a655de80 ("ASoC: core: Allow topology to override machine driver FE DAI link config") Signed-off-by:
-
Colin Ian King authored
The memory allocation failure check for priv->pd_dev is incorrectly pointer checking priv instead of priv->pd_dev. Fix this. Addresses-Coverity: ("Logically dead code") Fixes: 202acc56 ("ASoC: SOF: imx: Add i.MX8 HW support") Signed-off-by:Colin Ian King <colin.king@canonical.com> Reviewed-by:
-
- 18 Dec, 2019 2 commits
-
-
Pierre-Louis Bossart authored
When the PCM_PARAM IPC fails while configuring the FE, the kernel oopses in the HDaudio link DMA .hw_free operation. The root cause is a NULL dma_data since the BE .hw_params was never called by the SOC core. This error can also happen if the HDaudio link DMA configuration IPC fails in the BE .hw_params. This patches makes sure the dma_data is properly saved in .hw_params, and tested before being use in hw_free. GitHub issue: https://github.com/thesofproject/linux/issues/1417Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by:
-
Kai Vehmanen authored
If sof_machine_check() fails during driver probe, the IPC state is not initialized and this will lead to a NULL dereference at driver unload. Example log is as follows: [ 1535.980630] sof-audio-pci 0000:00:1f.3: error: no matching ASoC machine driver found - aborting probe [ 1535.980631] sof-audio-pci 0000:00:1f.3: error: failed to get machine info -19 [ 1535.980632] sof-audio-pci 0000:00:1f.3: error: sof_probe_work failed err: -19 [ 1550.798373] BUG: kernel NULL pointer dereference, address: 0000000000000008 ... [ 1550.798393] Call Trace: [ 1550.798397] snd_sof_ipc_free+0x15/0x30 [snd_sof] [ 1550.798399] snd_sof_device_remove+0x29/0xa0 [snd_sof] [ 1550.798400] sof_pci_remove+0x10/0x30 [snd_sof_pci] Signed-off-by:
-
- 16 Dec, 2019 1 commit
-
-
Shengjiu Wang authored
According to user manual, it is required that FLL_LAMBDA > 0 in all cases (Integer and Franctional modes). Fixes: 9a76f1ff ("ASoC: Add initial WM8962 CODEC driver") Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/1576065442-19763-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
- 10 Dec, 2019 7 commits
-
-
Amery Song authored
On CML boards with the RT5682 headset codec and RT1011 speaker amplifier, the platform firmware exposes three ACPI HIDs (10EC5682, 10EC1011 and MX98357A). The last HID is a mistake in DSDT tables, which causes the wrong machine driver to be loaded. This patch changes the key used to identify boards and changes the order of entries in the table to load the correct machine driver. The order does matter and should not be modified to work-around this firmware issue. Signed-off-by:
Amery Song <chao.song@intel.com> Signed-off-by:
Keyon Jie <yang.jie@linux.intel.com> Signed-off-by:
-
Curtis Malainey authored
Turns out SSP 3-5 are only available on cht, to avoid dumping on undefined registers let's split the definition. Signed-off-by:
Curtis Malainey <cujomalainey@chromium.org> Signed-off-by:
-
Karol Trzcinski authored
An error occurs during parsing more than one ext_data from the mailbox, because of invalid data offset handling. Fix by removing the incorrect duplicate increment of the offset. The return value is also reset in the switch case. This does not change the behavior but improves readability - there is no longer a need to check what the return value of get_ext_windows is. Signed-off-by:
Karol Trzcinski <karolx.trzcinski@linux.intel.com> Signed-off-by:
Bartosz Kokoszko <bartoszx.kokoszko@linux.intel.com> Signed-off-by:
-
Karol Trzcinski authored
Added warning log when found some unknown FW boot ext header, to improve debuggability. Signed-off-by:
-
Daniel Baluta authored
In normal sound case all DAIs are detected as CPU-Codec. simple_dai_link_of supports the presence of a platform but it counts it as a CPU DAI resulting in the creation of an extra link. Adding a platform property to a link description like: simple-audio-card,dai-link { cpu { sound-dai = <&sai1>; }; plat { sound-dai = <&dsp>; }; codec { sound-dai = <&wm8960>; } will result in the creation of two links: * sai1 <-> wm8960 * dsp <-> wm8960 which is obviously not what we want. We just want one single link with: * sai1 <-> wm8960 (and platform set to dsp). Signed-off-by: -
Dragos Tarcatu authored
The return value of soc_tplg_pcm_create() is currently not checked in soc_tplg_pcm_elems_load(). If an error is to occur there, the topology ignores it and continues loading. Fix that by checking the status and rejecting the topology on error. Reviewed-by:
-
Dragos Tarcatu authored
snd_soc_add_dai_link() might fail. This situation occurs for instance in a very specific use case where a PCM device and a Back End DAI link are given identical names in the topology. When this happens, soc_new_pcm_runtime() fails and then snd_soc_add_dai_link() returns -ENOMEM when called from soc_tplg_fe_link_create(). Because of that, the link will not get added into the card list, so any attempt to remove it later ends up in a panic. Fix that by checking the return status and free the memory in case of an error. Reviewed-by:
-
- 09 Dec, 2019 1 commit
-
-
Curtis Malainey authored
There are many paths to soc_free_pcm_runtime which can both have and have not yet inited the workqueue yet. When we flush the queue when we have not yet inited the queue we cause warnings to be printed. An example is soc_cleanup_card_resources which is called by snd_soc_bind_card which has multiple failure points before and after soc_link_init -> soc_new_pcm which is where the queue is inited. Signed-off-by:
-
- 04 Dec, 2019 2 commits
-
-
Hans de Goede authored
When the Teclast X89 quirk was added we did not have jack-detection support yet. Note the over-current detection limit is set to 2mA instead of the usual 1.5mA because this tablet tends to give false-positive button-presses when it is set to 1.5mA. Signed-off-by:
-
Curtis Malainey authored
There are cases where we fail before we reach soc_new_pcm which would init the workqueue. When we fail we attempt to flush the queue which generates warnings from the workqueue subsystem when we have not inited the queue. Solution is to use a proxy function to get around this issue. Signed-off-by:
-
- 03 Dec, 2019 1 commit
-
-
YueHaibing authored
Fix build error: sound/soc/intel/atom/sst/sst.c: In function intel_sst_interrupt_mrfld: sound/soc/intel/atom/sst/sst.c:93:5: error: implicit declaration of function memcpy_fromio; did you mean memcpy32_fromio? [-Werror=implicit-function-declaration] memcpy_fromio(msg->mailbox_data, ^~~~~~~~~~~~~ memcpy32_fromio Reported-by:Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
-
- 27 Nov, 2019 8 commits
-
-
Tzung-Bi Shih authored
max98090_interrupt() and max98090_pll_work() run in 2 different threads. There are 2 possible races: Note: M98090_REG_DEVICE_STATUS = 0x01. Note: ULK == 0, PLL is locked; ULK == 1, PLL is unlocked. max98090_interrupt max98090_pll_work ---------------------------------------------- schedule max98090_pll_work restart max98090 codec receive ULK INT assert ULK == 0 schedule max98090_pll_work (1). In the case (1), the PLL is locked but max98090_interrupt unnecessarily schedules another max98090_pll_work. max98090_interrupt max98090_pll_work max98090 codec ---------------------------------------------------------------------- ULK = 1 receive ULK INT read 0x01 ULK = 0 (clear on read) schedule max98090_pll_work restart max98090 codec ULK = 1 receive ULK INT read 0x01 ULK = 0 (clear on read) read 0x01 assert ULK == 0 (2). In the case (2), both max98090_interrupt and max98090_pll_work read the same clear-on-read register. max98090_pll_work would falsely thought PLL is locked. Note: the case (2) race is introduced by the previous commit ("ASoC: max98090: exit workaround earlier if PLL is locked") to check the status and exit the loop earlier in max98090_pll_work. There are 2 possible solution options: A. turn off ULK interrupt before scheduling max98090_pll_work; and turn on again before exiting max98090_pll_work. B. remove the second thread of execution. Option A cannot fix the case (2) race because it still has 2 threads access the same clear-on-read register simultaneously. Although we could suppose the register is volatile and read the status via I2C could be much slower than the hardware raises the bits. Option B introduces a maximum 10~12 msec penalty delay in the interrupt handler. However, it could only punish the jack detection by extra 10~12 msec. Adopts option B which is the better solution overall. Signed-off-by:Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20191122073114.219945-4-tzungbi@google.comReviewed-by:
-
Tzung-Bi Shih authored
According to the datasheet, PLL lock time typically takes 2 msec and at most takes 7 msec. Check the lock status every 1 msec and exit the workaround if PLL is locked. Signed-off-by:
-
Tzung-Bi Shih authored
It was observed Baytrail-based chromebooks could cause continuous PLL unlocked when using playback stream and capture stream simultaneously. Specifically, starting a capture stream after started a playback stream. As a result, the audio data could corrupt or turn completely silent. As the datasheet suggested, the maximum PLL lock time should be 7 msec. The workaround resets the codec softly by toggling SHDN off and on if PLL failed to lock for 10 msec. Notably, there is no suggested hold time for SHDN off. On Baytrail-based chromebooks, it would easily happen continuous PLL unlocked if there is a 10 msec delay between SHDN off and on. Removes the msleep(). Signed-off-by:
-
Michael Walle authored
The simple-card tries to signal the codec to disable rate constraints, see commit 2458adb8 ("SoC: simple-card-utils: set 0Hz to sysclk when shutdown"). This wasn't handled by the codec, instead it would set the FLL frequency to 0Hz which isn't working. Since we don't have any rate constraints just ignore this request. Fixes: 13409d27 ("ASoC: wm8904: configure sysclk/FLL automatically") Signed-off-by:
Michael Walle <michael@walle.cc> Acked-by:
-
YueHaibing authored
If CONFIG_SPI is n, SND_SOC_RT5677_SPI also is n, building fails: sound/soc/codecs/rt5677.o: In function `rt5677_irq': rt5677.c:(.text+0x2dbf): undefined reference to `rt5677_spi_hotword_detected' sound/soc/codecs/rt5677.o: In function `rt5677_dsp_work': rt5677.c:(.text+0x3709): undefined reference to `rt5677_spi_write' This adds stub helpers to fix this. Reported-by:
-
Daniel Baluta authored
Link unload now fails for ESAI/SAI DAIs with: "error: invalid DAI type 6" because DAI type is not properly handled. Fix this by correctly handling cases where type is ESAI or SAI. Fixes: a4eff5f8 ("ASoC: SOF: imx: Read ESAI parameters and send them to DSP") Signed-off-by:
-
Keyon Jie authored
The shim registers in BYT/CHT/BSW are 64bits based, correct the copy/paste (from bdw.c where the shim registers are 32bits based) error in byt_dump(). Fixes: 3a9e204d ("ASoC: SOF: Intel: Add context data to any IPC timeout") Signed-off-by:
-
Yu-Hsuan Hsu authored
Some usages only call startup and shutdown without setting hw_params (e.g. arecord --dump-hw-params). If we don't enable clk in startup, it will cause ref count error because the clk will be disabled in shutdown. For this reason, we should move enabling clk from hw_params to startup. In addition, the hw_params is fixed in this driver(48000 rate, 2 channels, S16_LE format) so we don't need to change the clk rate after the hw_params is set. Signed-off-by:
Yu-Hsuan Hsu <yuhsuan@chromium.org> Acked-by:
Akshu Agrawal <akshu.agarawal@amd.com> Link: https://lore.kernel.org/r/20191126075424.80668-1-yuhsuan@chromium.orgSigned-off-by:
-
- 25 Nov, 2019 1 commit
-
-
Shuming Fan authored
This patch modified the HW initial setting to fix i2c arbitration lost issue. Signed-off-by:
Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20191125091940.11953-1-shumingf@realtek.comSigned-off-by:
-
- 22 Nov, 2019 2 commits
-
-
Jaroslav Kysela authored
Current code: LENOVO-20QE000VMC-ThinkPadX1Carbon7th-20QE000VMC With the patch: LENOVO-20QE000VMC-ThinkPadX1Carbon7th Signed-off-by:
Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20191120174435.30920-2-perex@perex.czReviewed-by:
-
Jaroslav Kysela authored
Add append_dmi_string() function and make the code more readable. Signed-off-by:
-
- 20 Nov, 2019 1 commit
-
-
Krzysztof Kozlowski authored
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Acked-by:
-
