- 06 Nov, 2008 40 commits
-
-
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: Revert "x86: default to reboot via ACPI" x86: align DirectMap in /proc/meminfo AMD IOMMU: fix lazy IO/TLB flushing in unmap path x86: add smp_mb() before sending INVALIDATE_TLB_VECTOR x86: remove VISWS and PARAVIRT around NR_IRQS puzzle x86: mention ACPI in top-level Kconfig menu x86: size NR_IRQS on 32-bit systems the same way as 64-bit x86: don't allow nr_irqs > NR_IRQS x86/docs: remove noirqbalance param docs x86: don't use tsc_khz to calculate lpj if notsc is passed x86, voyager: fix smp_intr_init() compile breakage AMD IOMMU: fix detection of NP capable IOMMUs
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] xsc3: fix xsc3_l2_inv_range [ARM] mm: fix page table initialization [ARM] fix naming of MODULE_START / MODULE_END ARM: OMAP: Fix define for twl4030 irqs ARM: OMAP: Fix get_irqnr_and_base to clear spurious interrupt bits ARM: OMAP: Fix debugfs_create_*'s error checking method for arm/plat-omap ARM: OMAP: Fix compiler warnings in gpmc.c [ARM] fix VFP+softfloat binaries
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: dv1394: fix possible deadlock in multithreaded clients ieee1394: raw1394: fix possible deadlock in multithreaded clients ieee1394: struct device - replace bus_id with dev_name(), dev_set_name() firewire: struct device - replace bus_id with dev_name(), dev_set_name()
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: Block: use round_jiffies_up() Add round_jiffies_up and related routines block: fix __blkdev_get() for removable devices generic-ipi: fix the smp_mb() placement blk: move blk_delete_timer call in end_that_request_last block: add timer on blkdev_dequeue_request() not elv_next_request() bio: define __BIOVEC_PHYS_MERGEABLE block: remove unused ll_new_mergeable()
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] SAM9 watchdog - supported on all SAM9 and CAP9 processors [WATCHDOG] SAM9 watchdog - update for moved headers
-
git://neil.brown.name/mdLinus Torvalds authored
* 'for-linus' of git://neil.brown.name/md: md: linear: Fix a division by zero bug for very small arrays. md: fix bug in raid10 recovery. md: revert the recent addition of a call to the BLKRRPART ioctl.
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: powerpc: Fix "unused variable" warning in pci_dlpar.c powerpc/cell: Fix compile error in ras.c powerpc/ps3: Fix compile error in ps3-lpm.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fsLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: net/9p: fix printk format warnings unsigned fid->fid cannot be negative 9p: rdma: remove duplicated #include p9: Fix leak of waitqueue in request allocation path 9p: Remove unneeded free of fcall for Flush 9p: Make all client spin locks IRQ safe 9p: rdma: Set trans prior to requesting async connection ops
-
Linus Torvalds authored
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: re-tune balancing sched: fix buddies for group scheduling sched: backward looking buddy sched: fix fair preempt check sched: cleanup fair task selection
-
David Howells authored
Fix the hrtimer_add_expires_ns() function. It should take a 'u64 ns' argument, but rather takes an 'unsigned long ns' argument - which might only be 32-bits. On FRV, this results in the kernel locking up because hrtimer_forward() passes the result of a 64-bit multiplication to this function, for which the compiler discards the top 32-bits - something that didn't happen when ktime_add_ns() was called directly. Signed-off-by:
David Howells <dhowells@redhat.com> Acked-by:
Arjan van de Ven <arjan@linux.intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.infradead.org/mtd-2.6Linus Torvalds authored
* git://git.infradead.org/mtd-2.6: [JFFS2] fix race condition in jffs2_lzo_compress() [MTD] [NOR] Fix cfi_send_gen_cmd handling of x16 devices in x8 mode (v4) [JFFS2] Fix lack of locking in thread_should_wake() [JFFS2] Fix build failure with !CONFIG_JFFS2_FS_WRITEBUFFER [MTD] [NAND] OMAP2: remove duplicated #include
-
OGAWA Hirofumi authored
blkcnt_t type depends on CONFIG_LSF. Use unsigned long long always for printk(). But lazy to type it, so add "llu" and use it. Signed-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
OGAWA Hirofumi authored
i_pos is 64bits value, hence it's not atomic to update. Important place is fat_write_inode() only, other places without lock are just for printk(). This adds lock for "BITS_PER_LONG == 32" kernel. Signed-off-by:
-
OGAWA Hirofumi authored
mmu_private is 64bits value, hence it's not atomic to update. So, the access rule for mmu_private is we must hold ->i_mutex. But, fat_get_block() path doesn't follow the rule on non-allocation path. This fixes by using i_size instead if non-allocation path. Signed-off-by:
-
OGAWA Hirofumi authored
Signed-off-by:
-
OGAWA Hirofumi authored
fat_get_cluster() assumes the requested blocknr isn't truncated during read. _fat_bmap() doesn't follow this rule. This protects it by ->i_mutex. Signed-off-by:
-
OGAWA Hirofumi authored
FAT has the ATTR_RO (read-only) attribute. But on Windows, the ATTR_RO of the directory will be just ignored actually, and is used by only applications as flag. E.g. it's setted for the customized folder by Explorer. http://msdn2.microsoft.com/en-us/library/aa969337.aspx This adds "rodir" option. If user specified it, ATTR_RO is used as read-only flag even if it's the directory. Otherwise, inode->i_mode is not used to hold ATTR_RO (i.e. fat_mode_can_save_ro() returns 0). Signed-off-by:
-
OGAWA Hirofumi authored
If inode->i_mode doesn't have S_WUGO, current code assumes it means ATTR_RO. However, if (~[ufd]mask & S_WUGO) == 0, inode->i_mode can't hold S_WUGO. Therefore the updated directory entry will always have ATTR_RO. This adds fat_mode_can_hold_ro() to check it. And if inode->i_mode can't hold, uses -i_attrs to hold ATTR_RO instead. With this, we don't set ATTR_RO unless users change it via ioctl() if (~[ufd]mask & S_WUGO) == 0. And on FAT_IOCTL_GET_ATTRIBUTES path, this adds ->i_mutex to it for not returning the partially updated attributes by FAT_IOCTL_SET_ATTRIBUTES to userland. Signed-off-by:
-
OGAWA Hirofumi authored
This adds three helpers: fat_make_attrs() - makes FAT attributes from inode. fat_make_mode() - makes mode_t from FAT attributes. fat_save_attrs() - saves FAT attributes to inode. Then this replaces: MSDOS_MKMODE() by fat_make_mode(), fat_attr() by fat_make_attrs(), ->i_attrs = attr & ATTR_UNUSED by fat_save_attrs(). And for root inode, those is used with ATTR_DIR instead of bogus ATTR_NONE. Signed-off-by:
-
OGAWA Hirofumi authored
Use same style with vfat_lookup(). Signed-off-by:
-
OGAWA Hirofumi authored
d_invalidate() for positive dentry doesn't work in some cases (vfsmount, nfsd, and maybe others). shrink_dcache_parent() by d_invalidate() is pointless for vfat usage at all. So, this kills it, and intead of it uses d_move(). To save old behavior, this returns alias simply for directory (don't change pwd, etc..). the directory lookup shouldn't be important for performance. Signed-off-by:
-
OGAWA Hirofumi authored
- Add comments for handling dcache of vfat. - Separate case-sensitive case and case-insensitive to vfat_revalidate() and vfat_ci_revalidate(). vfat_revalidate() doesn't need to drop case-insensitive negative dentry on creation path. - Current code is missing to set ->d_revalidate to the negative dentry created by unlink/etc.. This sets ->d_revalidate always, and returns 1 for positive dentry. Now, we don't need to change ->d_op dynamically anymore, so this just uses sb->s_root->d_op to set ->d_op. - d_find_alias() may return DCACHE_DISCONNECTED dentry. It's not the interesting dentry there. This checks it. - Add missing LOOKUP_PARENT check. We don't need to drop the valid negative dentry for (LOOKUP_CREATE | LOOKUP_PARENT) lookup. - For consistent filename on creation path, this drops negative dentry if we can't see intent. Signed-off-by:
-
OGAWA Hirofumi authored
Current vfat_lookup() creates negetive dentry blindly if vfat_find() returned a error. It's wrong. If the error isn't -ENOENT, just return error. Signed-off-by:
-
OGAWA Hirofumi authored
Use fat_detach() instead of opencoding it. Signed-off-by:
-
OGAWA Hirofumi authored
This fixes the missing update for bhs/nr_bhs in case the caller accessed from block boundary to first block of boundary. Signed-off-by:
-
OGAWA Hirofumi authored
fat_hash() is using the algorithm known as bad. Instead of it, this uses hash_32(). The following is the summary of test. old hash: hash func (1000 times): 33489 cycles total inodes in hash table: 70926 largest bucket contains: 696 smallest bucket contains: 54 new hash: hash func (1000 times): 33129 cycles total inodes in hash table: 70926 largest bucket contains: 315 smallest bucket contains: 236 Signed-off-by:
-
Darren Jenkins authored
Coverity CID 2332 & 2333 RESOURCE_LEAK In fat_search_long() if fat_parse_long() returns a -ve value we return without first freeing unicode. This patch free's them on this error path. The above was false positive on current tree, but this change is more clean, so apply as cleanup. [hirofumi@mail.parknet.co.jp: fix coding style] Signed-off-by:
Darren Jenkins <darrenrjenkins@gmail.com> Signed-off-by:
-
OGAWA Hirofumi authored
Since fat_dir_ioctl() was already fixed (i.e. called under ->i_mutex), and __fat_readdir() doesn't take BKL anymore. So, BKL for ->llseek() is pointless, and we have to use generic_file_llseek(). Signed-off-by:
-
OGAWA Hirofumi authored
This cleans date_dos2unix()/fat_date_unix2dos() up. New code should be much more readable. And this fixes those old functions. Those doesn't handle 2100 correctly. 2100 isn't leap year, but old one handles it as leap year. Also, with this, centi sec is handled and is fixed. Signed-off-by:
-
OGAWA Hirofumi authored
This splits __KERNEL__ stuff in include/msdos_fs.h into fs/fat/fat.h. Signed-off-by:
-
OGAWA Hirofumi authored
This just moves those files, but change link order from MSDOS, VFAT to VFAT, MSDOS. Signed-off-by:
-
Bart Trojanowski authored
While debugging a sync mount regression on vfat I noticed that there were mount options parsed by the driver that were not documented. [hirofumi@mail.parknet.co.jp: fix some parts] Signed-off-by:
Bart Trojanowski <bart@jukie.net> Signed-off-by:
-
Andrew Victor authored
The architecture header files were recently moved from include/asm-arm/mach-at91/ to arch/arm/mach-at91/include/mach/. The SAM9 watchdog driver still includes a header from the old location. Signed-off-by:
Andrew Victor <linux@maxim.org.za> Cc: Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
-
Frans Pop authored
-rtc0: alarms up to one month, y3k, 114 bytes nvram, , hpet irqs irqs +rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs Signed-off-by:
Frans Pop <elendil@planet.nl> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
David Brownell authored
The atmel_serial driver is mismanaging its clock by leaving it on at all times ... the whole point of clock management is to leave it off unless it's actively needed, which conserves power!! Although the kernel doesn't actually hang without my fix, it does discard quite a lot of early console output. The result still looks correct: usart users= 1 on 35000000 Hz, for atmel_usart.0 usart users= 0 off 35000000 Hz, for atmel_usart.2 when using ttyS0 as serial console. [haavard.skinnemoen@atmel.com: Make sure clock is enabled early for console] Signed-off-by:David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by:
-
Li Zefan authored
cpuset can be used to move a process onto or off an isolated CPU. Signed-off-by:
Li Zefan <lizf@cn.fujitsu.com> Signed-off-by:
-
Geert Uytterhoeven authored
commit 3e680aae ("fb: convert lock/unlock_kernel() into local fb mutex") introduced several deadlocks in the fb_compat_ioctl() path, as mutex_lock() doesn't allow recursion, unlike lock_kernel(). This broke frame buffer applications on 64-bit systems with a 32-bit userland. commit 120a3747 ("framebuffer compat_ioctl deadlock") fixed one of the deadlocks. This patch fixes the remaining deadlocks: - Revert commit 120a3747, - Extract the core logic of fb_ioctl() into a new function do_fb_ioctl(), - Change all callsites of fb_ioctl() where info->lock is already held to call do_fb_ioctl() instead, - Add sparse annotations to all routines that take info->lock. Signed-off-by:
Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Gerald Schaefer authored
My last bugfix here (adding zone->lock) introduced a new problem: Using page_zone(pfn_to_page(pfn)) to get the zone after the for() loop is wrong. pfn will then be >= end_pfn, which may be in a different zone or not present at all. This may lead to an addressing exception in page_zone() or spin_lock_irqsave(). Now I use __first_valid_page() again after the loop to find a valid page for page_zone(). Signed-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Acked-by:
Nathan Fontenot <nfont@austin.ibm.com> Reviewed-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
-
Arthur Jones authored
In ext3_sync_fs, we only wait for a commit to finish if we started it, but there may be one already in progress which will not be synced. In the case of a data=ordered umount with pending long symlinks which are delayed due to a long list of other I/O on the backing block device, this causes the buffer associated with the long symlinks to not be moved to the inode dirty list in the second phase of fsync_super. Then, before they can be dirtied again, kjournald exits, seeing the UMOUNT flag and the dirty pages are never written to the backing block device, causing long symlink corruption and exposing new or previously freed block data to userspace. This can be reproduced with a script created by Eric Sandeen <sandeen@redhat.com>: #!/bin/bash umount /mnt/test2 mount /dev/sdb4 /mnt/test2 rm -f /mnt/test2/* dd if=/dev/zero of=/mnt/test2/bigfile bs=1M count=512 touch /mnt/test2/thisisveryveryveryveryveryveryveryveryveryveryveryveryveryveryveryverylongfilename ln -s /mnt/test2/thisisveryveryveryveryveryveryveryveryveryveryveryveryveryveryveryverylongfilename /mnt/test2/link umount /mnt/test2 mount /dev/sdb4 /mnt/test2 ls /mnt/test2/ umount /mnt/test2 To ensure all commits are synced, we flush all journal commits now when sync_fs'ing ext3. Signed-off-by:
Arthur Jones <ajones@riverbed.com> Cc: Eric Sandeen <sandeen@redhat.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: <linux-ext4@vger.kernel.org> Cc: <stable@kernel.org> [2.6.everything] Signed-off-by:
-
Qinghuang Feng authored
Paramter @mem has been removed since v2.6.26, now delete it's comment. Signed-off-by:
Qinghuang Feng <qhfeng.kernel@gmail.com> Acked-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
