- 11 Nov, 2014 35 commits
-
-
John W. Linville authored
Cc: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
James Cameron authored
While preparing an ad-hoc start command, the capability info bitmap is needlessly set from the command, and then the ESS bit cleared. Change to set the bitmap directly without reference to the command. Signed-off-by: James Cameron <quozl@laptop.org> Acked-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Luciano Coelho authored
The wlcore_cmd_send_failsafe() function is only called in the cmd.c file, where it is definde. Make it static. Additionally, move the EXPORT_SYMBOL macro for wl1271_cmd_send() to the right place. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Luciano Coelho authored
Check for the minimum required buffer length in wlcore_cmd_send() and wlcore_cmd_configure_failsafe. This ensures that we will never try to use a buffer that is smaller than the required header. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Amitkumar Karwar authored
It's been observed that wrong firmware version (ex. 66.14.96.p9 instead of 14.66.9.p96) is displayed on big endian platforms. The problem is fixed here. Reported-by: Daniel Mosquera <daniel.mosquera@ctag.com> Tested-by: Daniel Mosquera <daniel.mosquera@ctag.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
use code provided by Ashish Patro <patro@cs.wisc.edu> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
use values provided by Ashish Patro <patro@cs.wisc.edu> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
For some reason it didn't coused obvious problems. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
not sure why. Initially provided by Ashish Patro <patro@cs.wisc.edu> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
and rename exports from ath9k_spectral_* to ath9k_cmn_spectral_* Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
Now we should be ready to make this code common. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
last preparation before moving ath9k_spectral_scan_ to spectral.c Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
we don't have here any ieee80211_hw dependencies any way. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
we will need it to make common code Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
spectral code mostly depends on ath_hw, not on ath_softc Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
this will alow us to make ath_softc independent code. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Oleksij Rempel authored
and move rfs_chan_spec_scan to this struct. We will need it for common spectral scan code. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Avinash Patil authored
We see this warning while starting mwifiex AP: Unsupported RX-STBC, default to 2x2 This was happening because of wrong offset while copying HT capabilities from BSS configuration of start_ap handler. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Avinash Patil authored
It is observed that device sometimes sends BA setup requests for broadcast mac address. This patch adds a check to avoid checking availability of AMPDU/AMSDU streams for broadcast mac address. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Amitkumar Karwar authored
On some platforms, system goes out of memory during heavy Rx traffic with our USB chipsets. In case of SDIO/PCIe, after receiving 50 packets in Rx queue we stop processing interrupts till packets pending fall below low threshold i.e 20. We don't have similar logic for USB, so if host platform is slow, we would hit a case where firmware keeps on pushing packets at high speed than driver/kernel can process. We will stop submitting URBs for Rx data when pending packet count reaches high threshold and restart them when enough packets are consumed to solve the problem. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=85071Reported-by: Marek Belisko <marek.belisko@gmail.com> Tested-by: Marek Belisko <marek.belisko@gmail.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Avinash Patil authored
This patch removes redundant data complete handler. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Avinash Patil authored
This patch adds RX workqueue support for USB interfaces. Currently rx_pending is applicable for cmd/events and Rx data in USB interface. Let's use it only for Rx data. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
Track it per channel context instead of in the softc Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Hauke Mehrtens authored
It is not possible to auto detect the irq numbers used by the cores on an arm SoC. If bcma was registered with device tree it will search for some device tree nodes with the irq number and add it to the core configuration. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Hauke Mehrtens authored
This moves bcma_core_irq() to main.c and add a extra parameter with a number so that we can return different irq number for devices with more than one. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
John W. Linville authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
-
- 06 Nov, 2014 4 commits
-
-
Martin Townsend authored
Currently we ensure that the skb is freed on every error path in IPHC decompression which makes it easy to introduce skb leaks. By centralising the skb_free into the receive function it makes future decompression routines easier to maintain. It does come at the expense of ensuring that the skb passed into the decompression routine must not be copied. Signed-off-by: Martin Townsend <mtownsend1973@gmail.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Kuba Pawlak authored
Opcodes in switch/case in hci_cmd_status_evt are not sorted by value. This patch restores proper ordering. Signed-off-by: Kuba Pawlak <kubax.t.pawlak@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Kuba Pawlak authored
If role switch was rejected by the controller and HCI Event: Command Status returned with status "Command Disallowed" (0x0C) the flag HCI_CONN_RSWITCH_PEND remains set. No further role switches are possible as this flag prevents us from sending any new HCI Switch Role requests and the only way to clear it is to receive a valid HCI Event Switch Role. This patch clears the flag if command was rejected. 2013-01-01 00:03:44.209913 < HCI Command: Switch Role (0x02|0x000b) plen 7 bdaddr BC:C6:DB:C4:6F:79 role 0x00 Role: Master 2013-01-01 00:03:44.210867 > HCI Event: Command Status (0x0f) plen 4 Switch Role (0x02|0x000b) status 0x0c ncmd 1 Error: Command Disallowed Signed-off-by: Kuba Pawlak <kubax.t.pawlak@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Fengguang Wu authored
drivers/net/ieee802154/at86rf230.c:1365:1-3: WARNING: end returns can be simpified Simplify a trivial if-return sequence. Possibly combine with a preceding function call. Generated by: scripts/coccinelle/misc/simple_return.cocci Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
- 05 Nov, 2014 1 commit
-
-
Alexander Aring authored
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-