- 02 Jul, 2020 12 commits
-
-
Daniel Vetter authored
Now also comes with the added benefit of doing a drm_crtc_vblank_off(), which means vblank state isn't ill-defined and fail-y at driver load before the first modeset on each crtc. v2: Compile fix. Oops. Reviewed-by:
Roland Scheidegger <sroland@vmware.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Roland Scheidegger <sroland@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200612204940.2134653-1-daniel.vetter@ffwll.ch Link: https://patchwork.freedesktop.org/patch/msgid/20200612160056.2082681-7-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
Now also comes with the added benefit of doing a drm_crtc_vblank_off(), which means vblank state isn't ill-defined and fail-y at driver load before the first modeset on each crtc. Reviewed-by:
Maxime Ripard <mripard@kernel.org> Signed-off-by:
-
Daniel Vetter authored
Now also comes with the added benefit of doing a drm_crtc_vblank_off(), which means vblank state isn't ill-defined and fail-y at driver load before the first modeset on each crtc. Acked-by:
Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by:
-
Daniel Vetter authored
Now also comes with the added benefit of doing a drm_crtc_vblank_off(), which means vblank state isn't ill-defined and fail-y at driver load before the first modeset on each crtc. Acked-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Daniel Vetter authored
Now also comes with the added benefit of doing a drm_crtc_vblank_off(), which means vblank state isn't ill-defined and fail-y at driver load before the first modeset on each crtc. Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Daniel Vetter authored
Only when vblanks are supported ofc. Some drivers do this already, but most unfortunately missed it. This opens up bugs after driver load, before the crtc is enabled for the first time. syzbot spotted this when loading vkms as a secondary output. Given how many drivers are buggy it's best to solve this once and for all in shared helper code. Aside from moving the few existing calls to drm_crtc_vblank_reset into helpers (i915 doesn't use helpers, so keeps its own) I think the regression risk is minimal: atomic helpers already rely on drivers calling drm_crtc_vblank_on/off correctly in their hooks when they support vblanks. And driver that's failing to handle vblanks after this is missing those calls already, and vblanks could only work by accident when enabling a CRTC for the first time right after boot. Big thanks to Tetsuo for helping track down what's going wrong here. There's only a few drivers which already had the necessary call and needed some updating: - komeda, atmel and tidss also needed to be changed to call __drm_atomic_helper_crtc_reset() intead of open coding it - tegra and msm even had it in the same place already, just code motion, and malidp already uses __drm_atomic_helper_crtc_reset(). - Laurent noticed that rcar-du and omap open-code their crtc reset and hence would actually be broken by this patch now. So fix them up by reusing the helpers, which brings the drm_crtc_vblank_reset() back. Only call left is in i915, which doesn't use drm_mode_config_reset, but has its own fastboot infrastructure. So that's the only case where we actually want this in the driver still. I've also reviewed all other drivers which set up vblank support with drm_vblank_init. After the previous patch fixing mxsfb all atomic drivers do call drm_crtc_vblank_on/off as they should, the remaining drivers are either legacy kms or legacy dri1 drivers, so not affected by this change to atomic helpers. v2: Use the drm_dev_has_vblank() helper. v3: Laurent pointed out that omap and rcar-du used drm_crtc_vblank_off instead of drm_crtc_vblank_reset. Adjust them too. v4: Laurent noticed that rcar-du and omap open-code their crtc reset and hence would actually be broken by this patch now. So fix them up by reusing the helpers, which brings the drm_crtc_vblank_reset() back. v5: also mention rcar-du and ompadrm in the proper commit message above (Laurent). Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Boris Brezillon <boris.brezillon@collabora.com> Acked-by:
Liviu Dudau <liviu.dudau@arm.com> Acked-by:
Thierry Reding <treding@nvidia.com> Link: https://syzkaller.appspot.com/bug?id=0ba17d70d062b2595e1f061231474800f076c7cbReported-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: syzbot+0871b14ca2e2fb64f6e3@syzkaller.appspotmail.com Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: "James (Qian) Wang" <james.qian.wang@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Mihail Atanassov <mihail.atanassov@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Boris Brezillon <bbrezillon@kernel.org> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Brian Masney <masneyb@onstation.org> Cc: Emil Velikov <emil.velikov@collabora.com> Cc: zhengbin <zhengbin13@huawei.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-tegra@vger.kernel.org Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Signed-off-by:
-
Suraj Upadhyay authored
Resolve checkpatch issues for missing blank lines after declarations. Issues found in multiple files with checkpatch.pl. Signed-off-by:
Suraj Upadhyay <usuraj35@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200702131749.GA25710@blackclown
-
Lionel Landwerlin authored
There was probably a misunderstand on how the dma-fence-chain is supposed to work or what dma_fence_chain_find_seqno() is supposed to return. dma_fence_chain_find_seqno() is here to give us the fence to wait upon for a particular point in the timeline. The timeline progresses only when all the points prior to a given number have completed. Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: dc2f7e67 ("dma-buf: Exercise dma-fence-chain under selftests") Link: https://patchwork.freedesktop.org/patch/372960/Signed-off-by:
Christian König <christian.koenig@amd.com>
-
Lionel Landwerlin authored
This reverts commit 5de376bb. This change breaks synchronization of a timeline. dma_fence_chain_find_seqno() might be a bit of a confusing name but this function is not trying to find a particular seqno, is supposed to give a fence to wait on for a particular point in the timeline. In a timeline, a particular value is reached when all the points up to and including that value have signaled. Signed-off-by:
-
Christian König authored
As discussed on the list. Signed-off-by:
Sumit Semwal <sumit.semwal@linaro.org> Acked-by:
-
Imre Deak authored
The old epoch counter was left uninited, so the function returned a changed state always. While at it debug print the old epoch counter as well. Fixes: 35205ee9 ("drm/i915: Send hotplug event if edid had changed") Cc: Kunal Joshi <kunal1.joshi@intel.com> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200701180001.15857-1-imre.deak@intel.com
-
Tian Tao authored
using the new API drmm_kzalloc() instead of devm_kzalloc() v3: still fixed include statements sorted alphabetically. v2: keep the DRM include statements sorted alphabetically. Signed-off-by:
Tian Tao <tiantao6@hisilicon.com> Reviewed-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
-
- 01 Jul, 2020 20 commits
-
-
Ondrej Jirman authored
The reset pin is inverted, so if we don't assert reset, the actual gpio will be high and may keep driving the IO port of the panel. Signed-off-by:
Ondrej Jirman <megous@megous.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Tested-by:
Guido Günther <agx@sigxcpu.org> Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-12-megous@megous.com
-
Ondrej Jirman authored
The datasheet suggests to issue sleep in after display off as a part of the panel's shutdown sequence. Signed-off-by:
-
Ondrej Jirman authored
Xingbangda XBD599 is a 5.99" 720x1440 MIPI-DSI LCD panel used in PinePhone. Add support for it. Signed-off-by:
Icenowy Zheng <icenowy@aosc.io> Signed-off-by:
-
Ondrej Jirman authored
Calling sleep out and display on is a controller specific part of the initialization process. Move it out of the panel specific initialization function to the enable callback. Signed-off-by:
-
Ondrej Jirman authored
It's better than having it spread around the driver. Signed-off-by:
-
Ondrej Jirman authored
Parametrize the driver so that it can support more panels based on st7703 controller. Signed-off-by:
-
Ondrej Jirman authored
This is done so that code that's not specific to a particular jh057n panel is named after the controller. Functions specific to the panel are kept named after the panel. Signed-off-by:
-
Ondrej Jirman authored
This rename is done so that the driver matches the name of the display controller and in preparation for adding support for more panels to the driver. This is just a basic file rename, with no code changes. Signed-off-by:
-
Ondrej Jirman authored
Xingbangda XBD599 is a 5.99" 720x1440 MIPI-DSI LCD panel. It is based on Sitronix ST7703 LCD controller just like rocktech,jh057n00900. It is used in PinePhone. Add a compatible for it. Signed-off-by:
-
Ondrej Jirman authored
Convert Rocktech MIPI DSI panel driver from txt to yaml bindings. Signed-off-by:
-
Icenowy Zheng authored
Shenzhen Xingbangda Display Technology Co., Ltd is a company which produces LCD modules. It supplies the LCD panels for the PinePhone. Add the vendor prefix of it. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Sam Ravnborg authored
Use inline comments for the drm_bus_flags enum. This makes it easier to add more description comments in the future should the need arise. Signed-off-by:
-
Sam Ravnborg authored
Drop the now unused legacy drm_bus_flags values. Signed-off-by:
-
Sam Ravnborg authored
Replace all uses of the legacy drm_bus_flags with their relevant _SAMPLE_ variant. This is a 1:1 replacement, no effort was made to validate the actual bus flags for the panels. Note: DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE = DRM_BUS_FLAG_PIXDATA_NEGEDGE DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE = DRM_BUS_FLAG_PIXDATA_POSEDGE Signed-off-by:
-
Sam Ravnborg authored
Drop use of the legacy drm_bus_flags member and use the more descriptive _SAMPLE_ variant. No functional change. Note: DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE = DRM_BUS_FLAG_PIXDATA_NEGEDGE Signed-off-by:
-
Sam Ravnborg authored
Use the non-legacy drm_bus_flag _SAMPLE_ member. No functional change. Note: DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE = DRM_BUS_FLAG_PIXDATA_NEGEDGE Signed-off-by:
-
Sam Ravnborg authored
Replace the legacy member with the more descriptive _DRIVE_ variant. No functional change. Signed-off-by:
-
Sam Ravnborg authored
Use the more descriptive _DRIVE_ variants thus avoiding the legacy drm_bus_flags values. Signed-off-by:
Jyri Sarha <jsarha@ti.com> Reviewed-by:
-
Dmitry Osipenko authored
When graph isn't defined in a device-tree, the of_graph_get_remote_node() prints a noisy error message, telling that port node is not found. This is undesirable behaviour in our case because absence of a panel/bridge graph is a valid case. Let's check the graph's presence in a device-tree before proceeding with parsing of the graph. Reviewed-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
-
Dmitry Osipenko authored
In some cases it's very useful to silently check whether port node exists at all in a device-tree before proceeding with parsing the graph. The DRM bridges code is one example of such case where absence of a graph in a device-tree is a legit condition. This patch adds of_graph_is_present() which returns true if given device-tree node contains OF graph port. Reviewed-by:
-
- 30 Jun, 2020 8 commits
-
-
Laurent Pinchart authored
Only the MEDIA_BUS_FMT_RGB666_1X7X3_SPWG, MEDIA_BUS_FMT_RGB888_1X7X4_SPWG and MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA bus formats are valid for LVDS panels. Warn at probe time to catch the common mistake of using an incorrect format, as well as discrepancies between the bus format and the reported bpc. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
The DRM bus flags reporting on which clock edge the pixel data and sync signals are sampled or driven don't make sense for LVDS panels, as the bus then uses sub-clock timings to send data. Drop those flags and add a warning in the probe function to make sure the mistake won't be repeated. Signed-off-by:
-
Laurent Pinchart authored
The Satoz SAT050AT40H12R2 panel is an LVDS panel, the MEDIA_BUS_FMT_RGB888_1X24 bus format is thus incorrect. Set it to the correct value MEDIA_BUS_FMT_RGB888_1X7X4_SPWG. Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by:
-
Laurent Pinchart authored
The Starry KR070PE2T panel is a DPI panel, not and LVDS panel. Fix its connector type. Signed-off-by:
Pascal Roeleven <dev@pascalroeleven.nl> Signed-off-by:
-
Stanislav Lisovskiy authored
Added epoch counter checking to intel_encoder_hotplug in order to be able process all the connector changes, besides connection status. Also now any change in connector would result in epoch counter change, so no multiple checks are needed. v2: Renamed change counter to epoch counter. Fixed type name. v3: Fixed rebase conflict v4: Remove duplicate drm_edid_equal checks from hdmi and dp, lets use only once edid property is getting updated and increment epoch counter from there. Also lets now call drm_connector_update_edid_property right after we get edid always to make sure there is a unified way to handle edid change, without having to change tons of source code as currently drm_connector_update_edid_property is called only in certain cases like reprobing and not right after edid is actually updated. v5: Fixed const modifiers, removed blank line v6: Removed drm specific part from this patch, leaving only i915 specific changes here. Signed-off-by:Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200630002700.5451-4-kunal1.joshi@intel.comAcked-by:
Jani Nikula <jani.nikula@intel.com>
-
Stanislav Lisovskiy authored
This counter will be used by drm_helper_probe_detect caller to determine if anything had changed(including edid, connection status and etc). Hardware specific driver detect hooks are responsible for updating this counter when some change is detected to notify the drm part, which can trigger for example hotplug event. Also now call drm_connector_update_edid_property right after we get edid always to make sure there is a unified way to handle edid change, without having to change tons of source code as currently drm_connector_update_edid_property is called only in certain cases like reprobing and not right after edid is actually updated. v2: Added documentation for the new counter. Rename change_counter to epoch_counter. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105540Signed-off-by: -
Stanislav Lisovskiy authored
Many drivers would benefit from using drm helper to compare edid, rather than bothering with own implementation. v2: Added documentation for this function. Signed-off-by:
-
Maxime Ripard authored
The example used in the DPI binding before the conversion to YAML had a simple-panel example that got carried over to the YAML binding. However, that example doesn't match the simple-panel binding and results in validation errors. Since it's only marginally helpful, let's remove that part of the example entirely. Fixes: 09453600 ("dt-bindings: display: Convert VC4 bindings to schemas") Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Acked-by:
-
