Convert display/msm/gmu.txt to display/msm/gmu.yaml and remove the old
text bindings.  The 'sram' text from the old binding never applied to
the GMU so it was not converted but all the other properties were correct.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

The sram property was incorrectly added to the GMU binding when it
really belongs with the GPU binding instead. Let's go ahead and
move it.

While changes are being made here, let's update the sram property
description to mention that this property is only valid for a3xx and
a4xx GPUs. The a3xx/a4xx example in the GPU is replaced with what was
in the GMU.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Fixes: 198a72c8 ("dt-bindings: display: msm: gmu: add optional ocmem property")
Acked-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>

Also log buffers with the DUMP flag set, to ensure we capture all useful
cmdstream in crashdump state with modern mesa.

Otherwise we miss out on the contents of "state object" cmdstream
buffers.

v2: add missing 'inline'
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>

If the opp table specifies opp-supported-hw as a property but the driver
has not set a supported hardware value the OPP subsystem will reject
all the table entries.

Set a "default" value that will match the default table entries but not
conflict with any possible real bin values. Also fix a small memory leak
and free the buffer allocated by nvmem_cell_read().
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Fixes coccicheck warning:

drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:464:56-57: WARNING comparing pointer to 0
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:571:15-16: WARNING comparing pointer to 0
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:571:32-33: WARNING comparing pointer to 0
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:571:49-50: WARNING comparing pointer to 0
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:1968:17-18: WARNING comparing pointer to 0
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:1981:17-18: WARNING comparing pointer to 0
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:2012:51-52: WARNING comparing pointer to 0
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Fixes coccicheck warning:

drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c:27:51-52: WARNING comparing pointer to 0
drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c:109:51-52: WARNING comparing pointer to 0
drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c:167:12-13: WARNING comparing pointer to 0
drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c:167:22-23: WARNING comparing pointer to 0
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Fixes coccicheck warning:

drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c:242:48-49: WARNING comparing pointer to 0
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c:562:25-26: WARNING comparing pointer to 0
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c:562:48-49: WARNING comparing pointer to 0
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Fixes coccicheck warning:

drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c:414:52-53: WARNING comparing pointer to 0
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c:443:56-57: WARNING comparing pointer to 0
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c: In function _dpu_debugfs_show_regset32:
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:142:26: warning: variable priv set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c: In function dpu_kms_prepare_commit:
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:271:21: warning: variable dev set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c: In function _dpu_kms_hw_destroy:
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:555:21: warning: variable dev set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c: In function dpu_kms_hw_init:
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:763:26: warning: variable priv set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c: In function dpu_runtime_suspend:
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:1021:21: warning: variable ddev set but not used [-Wunused-but-set-variable]
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: tongtiangen <tongtiangen@huawei.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit.  Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>

We should free resources in unlikely case of allocation failure.
Signed-off-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Each of hdmi and edp are already attached in msm_*_bridge_init. A second
attachment returns -EBUSY, failing the driver load.

Tested with HDMI on IFC6410 (APQ8064 / MDP4), but eDP case should be
analogous.

Fixes: 3ef2f119 (drm/msm: Use drm_attach_bridge() to attach a bridge to an encoder)
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> (hdmi part)
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Move mapping of resources to encoder ids from the resource manager to a
new dpu_global_state struct. Store this struct in global atomic state.

Before this patch, atomic test would be performed by modifying global
state (resource manager), and backing out any changes if the test fails.
By using drm atomic global state, this is not necessary as any changes
to the global state will be discarded if the test fails.
Signed-off-by: Drew Davenport <ddavenport@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Track hardware resource objects in arrays rather than
a list and remove the resource manager's iterator idiom. Separate
the mapping of hardware resources to an encoder ID into a different
array.

Use an implicit mapping between the hardware blocks' ids, which
are 1-based, and array indices in these arrays to replace iteration
with index lookups in several places.
Signed-off-by: Drew Davenport <ddavenport@chromium.org>
[squash in minor compiler warning fixes]
Signed-off-by: Rob Clark <robdclark@chromium.org>

Make iterator implementation private, and add function to
query resources assigned to an encoder.
Signed-off-by: Drew Davenport <ddavenport@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Several functions arguments in the resource manager are unused, so
remove them.
Signed-off-by: Drew Davenport <ddavenport@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

Pull irq fix from Thomas Gleixner:
 "A single commit to handle an erratum in Cavium ThunderX to prevent
  access to GIC registers which are broken in the implementation"

* tag 'irq-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3: Workaround Cavium erratum 38539 when reading GICD_TYPER2

Pull futex fix from Thomas Gleixner:
 "Fix for yet another subtle futex issue.

  The futex code used ihold() to prevent inodes from vanishing, but
  ihold() does not guarantee inode persistence. Replace the inode
  pointer with a per boot, machine wide, unique inode identifier.

  The second commit fixes the breakage of the hash mechanism which
  causes a 100% performance regression"

* tag 'locking-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Unbreak futex hashing
  futex: Fix inode life-time issue

Pull x86 fixes from Thomas Gleixner:
 "Two fixes for x86:

   - Map EFI runtime service data as encrypted when SEV is enabled.

     Otherwise e.g. SMBIOS data cannot be properly decoded by dmidecode.

   - Remove the warning in the vector management code which triggered
     when a managed interrupt affinity changed outside of a CPU hotplug
     operation.

     The warning was correct until the recent core code change that
     introduced a CPU isolation feature which needs to migrate managed
     interrupts away from online CPUs under certain conditions to
     achieve the isolation"

* tag 'x86-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vector: Remove warning on managed interrupt migration
  x86/ioremap: Map EFI runtime services data as encrypted for SEV

Pull perf fixes from Thomas Gleixner:
 "A pile of perf fixes:

  Kernel side:

   - AMD uncore driver: Replace the open coded sanity check with the
     core variant, which provides the correct error code and also leaves
     a hint in dmesg

  Tooling:

   - Fix the stdio input handling with glibc versions >= 2.28

   - Unbreak the futex-wake benchmark which was reduced to 0 test
     threads due to the conversion to cpumaps

   - Initialize sigaction structs before invoking sys_sigactio()

   - Plug the mapfile memory leak in perf jevents

   - Fix off by one relative directory includes

   - Fix an undefined string comparison in perf diff"

* tag 'perf-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/amd/uncore: Replace manual sampling check with CAP_NO_INTERRUPT flag
  tools: Fix off-by 1 relative directory includes
  perf jevents: Fix leak of mapfile memory
  perf bench: Clear struct sigaction before sigaction() syscall
  perf bench futex-wake: Restore thread count default to online CPU count
  perf top: Fix stdio interface input handling with glibc 2.28+
  perf diff: Fix undefined string comparision spotted by clang's -Wstring-compare
  perf symbols: Don't try to find a vmlinux file when looking for kernel modules
  perf bench: Share some global variables to fix build with gcc 10
  perf parse-events: Use asprintf() instead of strncpy() to read tracepoint files
  perf env: Do not return pointers to local variables
  perf tests bp_account: Make global variable static

Pull timer fix from Thomas Gleixner:
 "A single fix adding the missing time namespace adjustment in
  sys/sysinfo which caused sys/sysinfo to be inconsistent with
  /proc/uptime when read from a task inside a time namespace"

* tag 'timers-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sys/sysinfo: Respect boottime inside time namespace

Pull RAS fixes from Thomas Gleixner:
 "Two RAS related fixes:

   - Shut down the per CPU thermal throttling poll work properly when a
     CPU goes offline.

     The missing shutdown caused the poll work to be migrated to a
     unbound worker which triggered warnings about the usage of
     smp_processor_id() in preemptible context

   - Fix the PPIN feature initialization which missed to enable the
     functionality when PPIN_CTL was enabled but the MSR locked against
     updates"

* tag 'ras-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Fix logic and comments around MSR_PPIN_CTL
  x86/mce/therm_throt: Undo thermal polling properly on CPU offline

Pull EFI fixes from Thomas Gleixner:
 "Two EFI fixes:

   - Prevent a race and buffer overflow in the sysfs efivars interface
     which causes kernel memory corruption.

   - Add the missing NULL pointer checks in efivar_store_raw()"

* tag 'efi-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: Add a sanity check to efivar_store_raw()
  efi: Fix a race and a buffer overflow while reading efivars via sysfs

Pull IOMMU fixes from Joerg Roedel:

 - Intel VT-d fixes:
    - RCU list handling fixes
    - Replace WARN_TAINT with pr_warn + add_taint for reporting firmware
      issues
    - DebugFS fixes
    - Fix for hugepage handling in iova_to_phys implementation
    - Fix for handling VMD devices, which have a domain number which
      doesn't fit into 16 bits
    - Warning message fix

 - MSI allocation fix for iommu-dma code

 - Sign-extension fix for io page-table code

 - Fix for AMD-Vi to properly update the is-running bit when AVIC is
   used

* tag 'iommu-fixes-v5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Populate debugfs if IOMMUs are detected
  iommu/amd: Fix IOMMU AVIC not properly update the is_run bit in IRTE
  iommu/vt-d: Ignore devices with out-of-spec domain number
  iommu/vt-d: Fix the wrong printing in RHSA parsing
  iommu/vt-d: Fix debugfs register reads
  iommu/vt-d: quirk_ioat_snb_local_iommu: replace WARN_TAINT with pr_warn + add_taint
  iommu/vt-d: dmar_parse_one_rmrr: replace WARN_TAINT with pr_warn + add_taint
  iommu/vt-d: dmar: replace WARN_TAINT with pr_warn + add_taint
  iommu/vt-d: Silence RCU-list debugging warnings
  iommu/vt-d: Fix RCU-list bugs in intel_iommu_init()
  iommu/dma: Fix MSI reservation allocation
  iommu/io-pgtable-arm: Fix IOVA validation for 32-bit
  iommu/vt-d: Fix a bug in intel_iommu_iova_to_phys() for huge page
  iommu/vt-d: Fix RCU list debugging warnings

Merge tag 'irqchip-fixes-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes from Marc Zyngier:

- Add workaround for Cavium/Marvell ThunderX unimplemented GIC registers

Pull i2c fixes from Wolfram Sang:
 "I2C has quite some regression fixes this time.

  One is also related to watchdogs, we have proper acks from Guenter for
  them"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: acpi: put device when verifying client fails
  misc: eeprom: at24: fix regulator underflow
  i2c: gpio: suppress error on probe defer
  macintosh: windfarm: fix MODINFO regression
  i2c: designware-pci: Fix BUG_ON during device removal
  i2c: i801: Do not add ICH_RES_IO_SMI for the iTCO_wdt device
  watchdog: iTCO_wdt: Make ICH_RES_IO_SMI optional
  watchdog: iTCO_wdt: Export vendorsupport

Pull ARC fixes from Vineet Gupta:

 - Fix __ALIGN_STR and __ALIGN to not use default junk padding

 - Misc Kconfig cleanups, header updates

* tag 'arc-5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: define __ALIGN_STR and __ALIGN symbols for ARC
  ARC: show_regs: reduce lines of output
  ARC: Replace <linux/clk-provider.h> by <linux/of_clk.h>
  ARC: fpu: fix randconfig build error reported by 0-day test service
  ARC: fix some Kconfig typos
  ARC: Cleanup old Kconfig IO scheduler options

Pull kvm fixes from Paolo Bonzini:
 "Bugfixes for x86 and s390"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: nVMX: avoid NULL pointer dereference with incorrect EVMCS GPAs
  KVM: x86: Initializing all kvm_lapic_irq fields in ioapic_write_indirect
  KVM: VMX: Condition ENCLS-exiting enabling on CPU support for SGX1
  KVM: s390: Also reset registers in sync regs for initial cpu reset
  KVM: fix Kconfig menu text for -Werror
  KVM: x86: remove stale comment from struct x86_emulate_ctxt
  KVM: x86: clear stale x86_emulate_ctxt->intercept value
  KVM: SVM: Fix the svm vmexit code for WRMSR
  KVM: X86: Fix dereference null cpufreq policy

Currently, the intel iommu debugfs directory(/sys/kernel/debug/iommu/intel)
gets populated only when DMA remapping is enabled (dmar_disabled = 0)
irrespective of whether interrupt remapping is enabled or not.

Instead, populate the intel iommu debugfs directory if any IOMMUs are
detected.

Cc: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: ee2636b8 ("iommu/vt-d: Enable base Intel IOMMU debugfs support")
Signed-off-by: Megha Dey <megha.dey@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

Pull clk fixes from Stephen Boyd:
 "A small collection of fixes. I'll make another sweep soon to look for
  more fixes for this -rc series.

   - Mark device node const in of_clk_get_parent APIs to ease landing
     changes in users later

   - Fix flag for Qualcomm SC7180 video clocks where we thought it would
     never turn off but actually hardware takes care of it

   - Remove disp_cc_mdss_rscc_ahb_clk on Qualcomm SC7180 SoCs because
     this clk is always on anyway

   - Correct some bad dt-binding numbers for i.MX8MN SoCs"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: imx8mn: Fix incorrect clock defines
  clk: qcom: dispcc: Remove support of disp_cc_mdss_rscc_ahb_clk
  clk: qcom: videocc: Update the clock flag for video_cc_vcodec0_core_clk
  of: clk: Make of_clk_get_parent_{count,name}() parameter const

When an EVMCS enabled L1 guest on KVM will tries doing enlightened VMEnter
with EVMCS GPA = 0 the host crashes because the

evmcs_gpa != vmx->nested.hv_evmcs_vmptr

condition in nested_vmx_handle_enlightened_vmptrld() will evaluate to
false (as nested.hv_evmcs_vmptr is zeroed after init). The crash will
happen on vmx->nested.hv_evmcs pointer dereference.

Another problematic EVMCS ptr value is '-1' but it only causes host crash
after nested_release_evmcs() invocation. The problem is exactly the same as
with '0', we mistakenly think that the EVMCS pointer hasn't changed and
thus nested.hv_evmcs_vmptr is valid.

Resolve the issue by adding an additional !vmx->nested.hv_evmcs
check to nested_vmx_handle_enlightened_vmptrld(), this way we will
always be trying kvm_vcpu_map() when nested.hv_evmcs is NULL
and this is supposed to catch all invalid EVMCS GPAs.

Also, initialize hv_evmcs_vmptr to '0' in nested_release_evmcs()
to be consistent with initialization where we don't currently
set hv_evmcs_vmptr to '-1'.

Cc: stable@vger.kernel.org
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvm-s390-master-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-master

KVM: s390: Fully do the CPU resets as intended

With 7de3f142 ("KVM: s390: Add new reset vcpu API") we clarified
the meaning of the reset ioctl to fully reset the CPU and not only the
parts that can not be handled by userspace. Turns out that we missed
some parts.

Despite the architecture spec requiring that reserved registers in the GIC
distributor memory map are RES0 (and thus are not allowed to generate
an exception), the Cavium ThunderX (aka TX1) SoC explodes as such:

[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 128 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] Internal error: synchronous external abort: 96000210 [#1] SMP
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc4-00035-g3cf6a3d5725f #7956
[    0.000000] Hardware name: cavium,thunder-88xx (DT)
[    0.000000] pstate: 60000085 (nZCv daIf -PAN -UAO)
[    0.000000] pc : __raw_readl+0x0/0x8
[    0.000000] lr : gic_init_bases+0x110/0x560
[    0.000000] sp : ffff800011243d90
[    0.000000] x29: ffff800011243d90 x28: 0000000000000000
[    0.000000] x27: 0000000000000018 x26: 0000000000000002
[    0.000000] x25: ffff8000116f0000 x24: ffff000fbe6a2c80
[    0.000000] x23: 0000000000000000 x22: ffff010fdc322b68
[    0.000000] x21: ffff800010a7a208 x20: 00000000009b0404
[    0.000000] x19: ffff80001124dad0 x18: 0000000000000010
[    0.000000] x17: 000000004d8d492b x16: 00000000f67eb9af
[    0.000000] x15: ffffffffffffffff x14: ffff800011249908
[    0.000000] x13: ffff800091243ae7 x12: ffff800011243af4
[    0.000000] x11: ffff80001126e000 x10: ffff800011243a70
[    0.000000] x9 : 00000000ffffffd0 x8 : ffff80001069c828
[    0.000000] x7 : 0000000000000059 x6 : ffff8000113fb4d1
[    0.000000] x5 : 0000000000000001 x4 : 0000000000000000
[    0.000000] x3 : 0000000000000000 x2 : 0000000000000000
[    0.000000] x1 : 0000000000000000 x0 : ffff8000116f000c
[    0.000000] Call trace:
[    0.000000]  __raw_readl+0x0/0x8
[    0.000000]  gic_of_init+0x188/0x224
[    0.000000]  of_irq_init+0x200/0x3cc
[    0.000000]  irqchip_init+0x1c/0x40
[    0.000000]  init_IRQ+0x160/0x1d0
[    0.000000]  start_kernel+0x2ec/0x4b8
[    0.000000] Code: a8c47bfd d65f03c0 d538d080 d65f03c0 (b9400000)

when reading the GICv4.1 GICD_TYPER2 register, which is unexpected...

Work around it by adding a new quirk for the following variants:

 ThunderX: CN88xx
 OCTEON TX: CN83xx, CN81xx
 OCTEON TX2: CN93xx, CN96xx, CN98xx, CNF95xx*

and use this flag to avoid accessing GICD_TYPER2. Note that all
reserved registers (including redistributors and ITS) are impacted
by this erratum, but that only GICD_TYPER2 has to be worked around
so far.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Robert Richter <rrichter@marvell.com>
Tested-by: Mark Salter <msalter@redhat.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Robert Richter <rrichter@marvell.com>
Link: https://lore.kernel.org/r/20191027144234.8395-11-maz@kernel.org
Link: https://lore.kernel.org/r/20200311115649.26060-1-maz@kernel.org

Previously all fields of structure kvm_lapic_irq were not initialized
before it was passed to kvm_bitmap_or_dest_vcpus(). Which will cause
an issue when any of those fields are used for processing a request.
For example not initializing the msi_redir_hint field before passing
to the kvm_bitmap_or_dest_vcpus(), may lead to a misbehavior of
kvm_apic_map_get_dest_lapic(). This will specifically happen when the
kvm_lowest_prio_delivery() returns TRUE due to a non-zero garbage
value of msi_redir_hint, which should not happen as the request belongs
to APIC fixed delivery mode and we do not want to deliver the
interrupt only to the lowest priority candidate.

This patch initializes all the fields of kvm_lapic_irq based on the
values of ioapic redirect_entry object before passing it on to
kvm_bitmap_or_dest_vcpus().

Fixes: 7ee30bc1 ("KVM: x86: deliver KVM IOAPIC scan request to target vCPUs")
Signed-off-by: Nitesh Narayan Lal <nitesh@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
[Set level to false since the value doesn't really matter. Suggested
 by Vitaly Kuznetsov. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Enable ENCLS-exiting (and thus set vmcs.ENCLS_EXITING_BITMAP) only if
the CPU supports SGX1.  Per Intel's SDM, all ENCLS leafs #UD if SGX1
is not supported[*], i.e. intercepting ENCLS to inject a #UD is
unnecessary.

Avoiding ENCLS-exiting even when it is reported as supported by the CPU
works around a reported issue where SGX is "hard" disabled after an S3
suspend/resume cycle, i.e. CPUID.0x7.SGX=0 and the VMCS field/control
are enumerated as unsupported.  While the root cause of the S3 issue is
unknown, it's definitely _not_ a KVM (or kernel) bug, i.e. this is a
workaround for what is most likely a hardware or firmware issue.  As a
bonus side effect, KVM saves a VMWRITE when first preparing vmcs01 and
vmcs02.

Note, SGX must be disabled in BIOS to take advantage of this workaround

[*] The additional ENCLS CPUID check on SGX1 exists so that SGX can be
    globally "soft" disabled post-reset, e.g. if #MC bits in MCi_CTL are
    cleared.  Soft disabled meaning disabling SGX without clearing the
    primary CPUID bit (in leaf 0x7) and without poking into non-SGX
    CPU paths, e.g. for the VMCS controls.

Fixes: 0b665d30 ("KVM: vmx: Inject #UD for SGX ENCLS instruction in guest")
Reported-by: Toni Spets <toni.spets@iki.fi>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Commit b9c6ff94 ("iommu/amd: Re-factor guest virtual APIC
(de-)activation code") accidentally left out the ir_data pointer when
calling modity_irte_ga(), which causes the function amd_iommu_update_ga()
to return prematurely due to struct amd_ir_data.ref is NULL and
the "is_run" bit of IRTE does not get updated properly.

This results in bad I/O performance since IOMMU AVIC always generate GA Log
entry and notify IOMMU driver and KVM when it receives interrupt from the
PCI pass-through device instead of directly inject interrupt to the vCPU.

Fixes by passing ir_data when calling modify_irte_ga() as done previously.

Fixes: b9c6ff94 ("iommu/amd: Re-factor guest virtual APIC (de-)activation code")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>