- 19 Sep, 2018 40 commits
-
-
Mauricio Faria de Oliveira authored
[ Upstream commit 14cb2c8a ] The if-block that sets a successful return value in aix_partition() uses 'lvip[].pps_per_lv' and 'n[].name' potentially uninitialized. For example, if 'numlvs' is zero or alloc_lvn() fails, neither is initialized, but are used anyway if alloc_pvd() succeeds after it. So, make the alloc_pvd() call conditional on their initialization. This has been hit when attaching an apparently corrupted/stressed AIX LUN, misleading the kernel to pr_warn() invalid data and hang. [...] partition (null) (11 pp's found) is not contiguous [...] partition (null) (2 pp's found) is not contiguous [...] partition (null) (3 pp's found) is not contiguous [...] partition (null) (64 pp's found) is not contiguous Fixes: 6ceea22b ("partitions: add aix lvm partition support files") Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mauricio Faria de Oliveira authored
[ Upstream commit d43fdae7 ] Even if properly initialized, the lvname array (i.e., strings) is read from disk, and might contain corrupt data (e.g., lack the null terminating character for strings). So, make sure the partition name string used in pr_warn() has the null terminating character. Fixes: 6ceea22b ("partitions: add aix lvm partition support files") Suggested-by: Daniel J. Axtens <daniel.axtens@canonical.com> Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nick Dyer authored
[ Upstream commit 36f5d9ef ] The driver only registers one input device, which uses the screen parameters from the first T9 instance. The first T63 instance also uses those parameters. It is incorrect to send input reports from the second instances of these objects if they are enabled: the input scaling will be wrong and the positions will be mashed together. This also causes problems on Android if the number of slots exceeds 32. In the future, this could be handled by looking for enabled touch object instances and creating an input device for each one. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Petr Machata authored
[ Upstream commit 08193d1a ] The function dcb_app_lookup walks the list of specified DCB APP entries, looking for one that matches a given criteria: ifindex, selector, protocol ID and optionally also priority. The "don't care" value for priority is set to 0, because that priority has not been allowed under CEE regime, which predates the IEEE standardization. Under IEEE, 0 is a valid priority number. But because dcb_app_lookup considers zero a wild card, attempts to add an APP entry with priority 0 fail when other entries exist for a given ifindex / selector / PID triplet. Fix by changing the wild-card value to -1. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nicholas Mc Guire authored
[ Upstream commit b1259519 ] The call to of_find_node_by_name returns a node pointer with refcount incremented thus it must be explicitly decremented here after the last usage. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/19558/ Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yelena Krivosheev authored
[ Upstream commit 8466baf7 ] It is incorrect to enable TX/RX queues (call by mvneta_port_up()) for port without link. Indeed MTU change for interface without link causes TX queues to stuck. Fixes: c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by: Yelena Krivosheev <yelena@marvell.com> [gregory.clement: adding Fixes tags and rewording commit log] Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Anton Vasilyev authored
[ Upstream commit 4bf4eed4 ] If ioh_gpio_probe() fails on devm_irq_alloc_descs() then chip may point to any element of chip_save array, so reverse iteration from pointer chip may become chip_save[-1] and gpiochip_remove() will operate with wrong memory. The patch fix the error path of ioh_gpio_probe() to correctly bypass chip_save array. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Joerg Roedel authored
[ Upstream commit 6863ea0c ] It is perfectly okay to take page-faults, especially on the vmalloc area while executing an NMI handler. Remove the warning. Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: David H. Gutteridge <dhgutteridge@sympatico.ca> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: linux-mm@kvack.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Waiman Long <llong@redhat.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: joro@8bytes.org Link: https://lkml.kernel.org/r/1532533683-5988-2-git-send-email-joro@8bytes.orgSigned-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marcel Holtmann authored
[ Upstream commit b3cadaa4 ] This fixes two issues with setting hid->name information. CC net/bluetooth/hidp/core.o In function ‘hidp_setup_hid’, inlined from ‘hidp_session_dev_init’ at net/bluetooth/hidp/core.c:815:9, inlined from ‘hidp_session_new’ at net/bluetooth/hidp/core.c:953:8, inlined from ‘hidp_connection_add’ at net/bluetooth/hidp/core.c:1366:8: net/bluetooth/hidp/core.c:778:2: warning: ‘strncpy’ output may be truncated copying 127 bytes from a string of length 127 [-Wstringop-truncation] strncpy(hid->name, req->name, sizeof(req->name) - 1); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CC net/bluetooth/hidp/core.o net/bluetooth/hidp/core.c: In function ‘hidp_setup_hid’: net/bluetooth/hidp/core.c:778:38: warning: argument to ‘sizeof’ in ‘strncpy’ call is the same expression as the source; did you mean to use the size of the destination? [-Wsizeof-pointer-memaccess] strncpy(hid->name, req->name, sizeof(req->name)); ^ Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Surabhi Vishnoi authored
[ Upstream commit 673bc519 ] The tx completion of multiple mgmt frames can be bundled in a single event and sent by the firmware to host, if this capability is not disabled explicitly by the host. If the host cannot handle the bundled mgmt tx completion, this capability support needs to be disabled in the wmi init cmd, sent to the firmware. Add the host capability indication flag in the wmi ready command, to let firmware know the features supported by the host driver. This field is ignored if it is not supported by firmware. Set the host capability indication flag(i.e. host_capab) to zero, for disabling the support of bundle mgmt tx completion. This will indicate the firmware to send completion event for every mgmt tx completion, instead of bundling them together and sending in a single event. Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1 Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org> Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Anton Vasilyev authored
[ Upstream commit 4dc98c19 ] tw_probe() returns 0 in case of fail of tw_initialize_device_extension(), pci_resource_start() or tw_reset_sequence() and releases resources. twl_probe() returns 0 in case of fail of twl_initialize_device_extension(), pci_iomap() and twl_reset_sequence(). twa_probe() returns 0 in case of fail of tw_initialize_device_extension(), ioremap() and twa_reset_sequence(). The patch adds retval initialization for these cases. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru> Acked-by: Adam Radford <aradford@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Srinivas Pandruvada authored
[ Upstream commit 2dbb3ec2 ] We have seen that on some platforms, SATA device never show any DEVSLP residency. This prevent power gating of SATA IP, which prevent system to transition to low power mode in systems with SLP_S0 aka modern standby systems. The PHY logic is off only in DEVSLP not in slumber. Reference: https://www.intel.com/content/dam/www/public/us/en/documents/datasheets /332995-skylake-i-o-platform-datasheet-volume-1.pdf Section 28.7.6.1 Here driver is trying to do read-modify-write the devslp register. But not resetting the bits for which this driver will modify values (DITO, MDAT and DETO). So simply reset those bits before updating to new values. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paul Burton authored
[ Upstream commit 0494d7ff ] isa_virt_to_bus() & isa_bus_to_virt() claim to treat ISA bus addresses as being identical to physical addresses, but they fail to do so in the presence of a non-zero PHYS_OFFSET. Correct this by having them use virt_to_phys() & phys_to_virt(), which consolidates the calculations to one place & ensures that ISA bus addresses do indeed match physical addresses. Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/20047/ Cc: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: Vladimir Kondratiev <vladimir.kondratiev@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sven Eckelmann authored
[ Upstream commit 3f259111 ] The QCA4019 hw1.0 firmware 10.4-3.2.1-00050 and 10.4-3.5.3-00053 (and most likely all other) seem to ignore the WMI_CHAN_FLAG_DFS flag during the scan. This results in transmission (probe requests) on channels which are not "available" for transmissions. Since the firmware is closed source and nothing can be done from our side to fix the problem in it, the driver has to work around this problem. The WMI_CHAN_FLAG_PASSIVE seems to be interpreted by the firmware to not scan actively on a channel unless an AP was detected on it. Simple probe requests will then be transmitted by the STA on the channel. ath10k must therefore also use this flag when it queues a radar channel for scanning. This should reduce the chance of an active scan when the channel might be "unusable" for transmissions. Fixes: e8a50f8b ("ath10k: introduce DFS implementation") Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Finn Thain authored
[ Upstream commit 576d5290 ] Add missing in_8() accessors to init_pmu() and pmu_sr_intr(). This fixes several sparse warnings: drivers/macintosh/via-pmu.c:536:29: warning: dereference of noderef expression drivers/macintosh/via-pmu.c:537:33: warning: dereference of noderef expression drivers/macintosh/via-pmu.c:1455:17: warning: dereference of noderef expression drivers/macintosh/via-pmu.c:1456:69: warning: dereference of noderef expression Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Olga Kornievskaia authored
[ Upstream commit 32cd3ee5 ] If there is an error during processing of a callback message, it leads to refrence leak on the client structure and eventually an unclean superblock. Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christophe Leroy authored
[ Upstream commit 21b8732e ] After update of kernel, the perf tool doesn't run anymore on my 32MB RAM powerpc board, but still runs on a 128MB RAM board: ~# strace perf execve("/usr/sbin/perf", ["perf"], [/* 12 vars */]) = -1 ENOMEM (Cannot allocate memory) --- SIGSEGV {si_signo=SIGSEGV, si_code=SI_KERNEL, si_addr=0} --- +++ killed by SIGSEGV +++ Segmentation fault objdump -x shows that .bss section has a huge size of 24Mbytes: 27 .bss 016baca8 101cebb8 101cebb8 001cd988 2**3 With especially the following objects having quite big size: 10205f80 l O .bss 00140000 runtime_cycles_stats 10345f80 l O .bss 00140000 runtime_stalled_cycles_front_stats 10485f80 l O .bss 00140000 runtime_stalled_cycles_back_stats 105c5f80 l O .bss 00140000 runtime_branches_stats 10705f80 l O .bss 00140000 runtime_cacherefs_stats 10845f80 l O .bss 00140000 runtime_l1_dcache_stats 10985f80 l O .bss 00140000 runtime_l1_icache_stats 10ac5f80 l O .bss 00140000 runtime_ll_cache_stats 10c05f80 l O .bss 00140000 runtime_itlb_cache_stats 10d45f80 l O .bss 00140000 runtime_dtlb_cache_stats 10e85f80 l O .bss 00140000 runtime_cycles_in_tx_stats 10fc5f80 l O .bss 00140000 runtime_transaction_stats 11105f80 l O .bss 00140000 runtime_elision_stats 11245f80 l O .bss 00140000 runtime_topdown_total_slots 11385f80 l O .bss 00140000 runtime_topdown_slots_retired 114c5f80 l O .bss 00140000 runtime_topdown_slots_issued 11605f80 l O .bss 00140000 runtime_topdown_fetch_bubbles 11745f80 l O .bss 00140000 runtime_topdown_recovery_bubbles This is due to commit 4d255766 ("perf: Bump max number of cpus to 1024"), because many tables are sized with MAX_NR_CPUS This patch gives the opportunity to redefine MAX_NR_CPUS via $ make EXTRA_CFLAGS=-DMAX_NR_CPUS=1 Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20170922112043.8349468C57@po15668-vm-win7.idsi0.si.c-s.frSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yunlong Song authored
[ Upstream commit 3611ce99 ] For the case when sbi->segs_per_sec > 1, take section:segment = 5 for example, if segment 1 is just used and allocate new segment 2, and the blocks of segment 1 is invalidated, at this time, the previous code will use __set_test_and_free to free the free_secmap and free_sections++, this is not correct since it is still a current section, so fix it. Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Anton Vasilyev authored
[ Upstream commit 0419056e ] If number of isa and pci boards exceed NUM_BOARDS on the path rp_init()->init_PCI()->register_PCI() then buffer overwrite occurs in register_PCI() on assign rcktpt_io_addr[i]. The patch adds check on upper bound for index of registered board in register_PCI. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
[ Upstream commit f019f07e ] The uio_unregister_device() function assumes that if "info->uio_dev" is non-NULL that means "info" is fully allocated. Setting info->uio_de has to be the last thing in the function. In the current code, if request_threaded_irq() fails then we return with info->uio_dev set to non-NULL but info is not fully allocated and it can lead to double frees. Fixes: beafc54c ("UIO: Add the User IO core code") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Anton Vasilyev authored
[ Upstream commit 81ae962d ] Free resources instead of direct return of the error code if kim_probe fails. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
BingJing Chang authored
[ Upstream commit d63e2fc8 ] During raid5 replacement, the stripes can be marked with R5_NeedReplace flag. Data can be read from being-replaced devices and written to replacing spares without reading all other devices. (It's 'replace' mode. s.replacing = 1) If a being-replaced device is dropped, the replacement progress will be interrupted and resumed with pure recovery mode. However, existing stripes before being interrupted cannot read from the dropped device anymore. It prints lots of WARN_ON messages. And it results in data corruption because existing stripes write problematic data into its replacement device and update the progress. \# Erase disks (1MB + 2GB) dd if=/dev/zero of=/dev/sda bs=1MB count=2049 dd if=/dev/zero of=/dev/sdb bs=1MB count=2049 dd if=/dev/zero of=/dev/sdc bs=1MB count=2049 dd if=/dev/zero of=/dev/sdd bs=1MB count=2049 mdadm -C /dev/md0 -amd -R -l5 -n3 -x0 /dev/sd[abc] -z 2097152 \# Ensure array stores non-zero data dd if=/root/data_4GB.iso of=/dev/md0 bs=1MB \# Start replacement mdadm /dev/md0 -a /dev/sdd mdadm /dev/md0 --replace /dev/sda Then, Hot-plug out /dev/sda during recovery, and wait for recovery done. echo check > /sys/block/md0/md/sync_action cat /sys/block/md0/md/mismatch_cnt # it will be greater than 0. Soon after you hot-plug out /dev/sda, you will see many WARN_ON messages. The replacement recovery will be interrupted shortly. After the recovery finishes, it will result in data corruption. Actually, it's just an unhandled case of replacement. In commit <f94c0b66> (md/raid5: fix interaction of 'replace' and 'recovery'.), if a NeedReplace device is not UPTODATE then that is an error, the commit just simply print WARN_ON but also mark these corrupted stripes with R5_WantReplace. (it means it's ready for writes.) To fix this case, we can leverage 'sync and replace' mode mentioned in commit <9a3e1101> (md/raid5: detect and handle replacements during recovery.). We can add logics to detect and use 'sync and replace' mode for these stripes. Reported-by: Alex Chen <alexchen@synology.com> Reviewed-by: Alex Wu <alexwu@synology.com> Reviewed-by: Chung-Chiang Cheng <cccheng@synology.com> Signed-off-by: BingJing Chang <bingjingc@synology.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mike Christie authored
[ Upstream commit 6a64f6e1 ] When __transport_register_session is called from transport_register_session irqs will already have been disabled, so we do not want the unlock irq call to enable them until the higher level has done the final spin_unlock_irqrestore/ spin_unlock_irq. This has __transport_register_session use the save/restore call. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dmitry Osipenko authored
[ Upstream commit 40b25bce ] There is a bug in regards to deferred probing within the drivers core that causes GPIO-driver to suspend after its users. The bug appears if GPIO-driver probe is getting deferred, which happens after introducing dependency on PINCTRL-driver for the GPIO-driver by defining "gpio-ranges" property in device-tree. The bug in the drivers core is old (more than 4 years now) and is well known, unfortunately there is no easy fix for it. The good news is that we can workaround the deferred probe issue by changing GPIO / PINCTRL drivers registration order and hence by moving PINCTRL driver registration to the arch_init level and GPIO to the subsys_init. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hedberg authored
[ Upstream commit 6c3711ec ] This driver was recently updated to use serdev, so add the appropriate dependency. Without this one can get compiler warnings like this if CONFIG_SERIAL_DEV_BUS is not enabled: CC [M] drivers/bluetooth/hci_h5.o drivers/bluetooth/hci_h5.c:934:36: warning: ‘h5_serdev_driver’ defined but not used [-Wunused-variable] static struct serdev_device_driver h5_serdev_driver = { ^~~~~~~~~~~~~~~~ Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Florian Fainelli authored
[ Upstream commit d89d4155 ] Android's header sanitization tool chokes on static inline functions having a trailing semicolon, leading to an incorrectly parsed header file. While the tool should obviously be fixed, also fix the header files for the two affected functions: ethtool_get_flow_spec_ring() and ethtool_get_flow_spec_ring_vf(). Fixes: 8cf6f497 ("ethtool: Add helper routines to pass vf to rx_flow_spec") Reporetd-by: Blair Prescott <blair.prescott@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
[ Upstream commit a39284ae ] There are only 2 callers of scif_get_new_port() and both appear to get the error handling wrong. Both treat zero returns as error, but it actually returns negative error codes and >= 0 on success. Fixes: e9089f43 ("misc: mic: SCIF open close bind and listen APIs") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexey Brodkin authored
commit c83532fb upstream. SWAP support on ARC was fixed earlier by commit 6e376114 ("ARC: Fix CONFIG_SWAP") so now we may safely enable it on platforms that have external media like USB and SD-card. Note: it was already allowed for HSDK Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: stable@vger.kernel.org # 6e376114: ARC: Fix CONFIG_SWAP Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Prateek Sood authored
commit 50972fe7 upstream. Fix ordering of link creation between node->prev and prev->next in osq_lock(). A case in which the status of optimistic spin queue is CPU6->CPU2 in which CPU6 has acquired the lock. tail v ,-. <- ,-. |6| |2| `-' -> `-' At this point if CPU0 comes in to acquire osq_lock, it will update the tail count. CPU2 CPU0 ---------------------------------- tail v ,-. <- ,-. ,-. |6| |2| |0| `-' -> `-' `-' After tail count update if CPU2 starts to unqueue itself from optimistic spin queue, it will find an updated tail count with CPU0 and update CPU2 node->next to NULL in osq_wait_next(). unqueue-A tail v ,-. <- ,-. ,-. |6| |2| |0| `-' `-' `-' unqueue-B ->tail != curr && !node->next If reordering of following stores happen then prev->next where prev being CPU2 would be updated to point to CPU0 node: tail v ,-. <- ,-. ,-. |6| |2| |0| `-' `-' -> `-' osq_wait_next() node->next <- 0 xchg(node->next, NULL) tail v ,-. <- ,-. ,-. |6| |2| |0| `-' `-' `-' unqueue-C At this point if next instruction WRITE_ONCE(next->prev, prev); in CPU2 path is committed before the update of CPU0 node->prev = prev then CPU0 node->prev will point to CPU6 node. tail v----------. v ,-. <- ,-. ,-. |6| |2| |0| `-' `-' `-' `----------^ At this point if CPU0 path's node->prev = prev is committed resulting in change of CPU0 prev back to CPU2 node. CPU2 node->next is NULL currently, tail v ,-. <- ,-. <- ,-. |6| |2| |0| `-' `-' `-' `----------^ so if CPU0 gets into unqueue path of osq_lock it will keep spinning in infinite loop as condition prev->next == node will never be true. Signed-off-by: Prateek Sood <prsood@codeaurora.org> [ Added pictures, rewrote comments. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: sramana@codeaurora.org Link: http://lkml.kernel.org/r/1500040076-27626-1-git-send-email-prsood@codeaurora.orgSigned-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michal Hocko authored
commit 476accbe upstream. There is a strange __GFP_NOMEMALLOC usage pattern in SELinux, specifically GFP_ATOMIC | __GFP_NOMEMALLOC which doesn't make much sense. GFP_ATOMIC on its own allows to access memory reserves while __GFP_NOMEMALLOC dictates we cannot use memory reserves. Replace this with the much more sane GFP_NOWAIT in the AVC code as we can tolerate memory allocation failures in that code. Signed-off-by: Michal Hocko <mhocko@kernel.org> Acked-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Prateek Sood authored
commit 9c29c318 upstream. If a spinner is present, there is a chance that the load of rwsem_has_spinner() in rwsem_wake() can be reordered with respect to decrement of rwsem count in __up_write() leading to wakeup being missed: spinning writer up_write caller --------------- ----------------------- [S] osq_unlock() [L] osq spin_lock(wait_lock) sem->count=0xFFFFFFFF00000001 +0xFFFFFFFF00000000 count=sem->count MB sem->count=0xFFFFFFFE00000001 -0xFFFFFFFF00000001 spin_trylock(wait_lock) return rwsem_try_write_lock(count) spin_unlock(wait_lock) schedule() Reordering of atomic_long_sub_return_release() in __up_write() and rwsem_has_spinner() in rwsem_wake() can cause missing of wakeup in up_write() context. In spinning writer, sem->count and local variable count is 0XFFFFFFFE00000001. It would result in rwsem_try_write_lock() failing to acquire rwsem and spinning writer going to sleep in rwsem_down_write_failed(). The smp_rmb() will make sure that the spinner state is consulted after sem->count is updated in up_write context. Signed-off-by: Prateek Sood <prsood@codeaurora.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave@stgolabs.net Cc: longman@redhat.com Cc: parri.andrea@gmail.com Cc: sramana@codeaurora.org Link: http://lkml.kernel.org/r/1504794658-15397-1-git-send-email-prsood@codeaurora.orgSigned-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tejun Heo authored
commit e00f4f4d upstream. blkcg allocates some per-cgroup data structures with GFP_NOWAIT and when that fails falls back to operations which aren't specific to the cgroup. Occassional failures are expected under pressure and falling back to non-cgroup operation is the right thing to do. Unfortunately, I forgot to add __GFP_NOWARN to these allocations and these expected failures end up creating a lot of noise. Add __GFP_NOWARN. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Marc MERLIN <marc@merlins.org> Reported-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Daniel Micay authored
commit 88a5b39b upstream. Noticed by FORTIFY_SOURCE, this swaps memcpy() for strncpy() to zero-value fill the end of the buffer instead of over-reading a string from .rodata. Signed-off-by: Daniel Micay <danielmicay@gmail.com> [kees: wrote commit log] Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Wayne Porter <wporter82@gmail.com> Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
-
Jia-Ju Bai authored
commit 498c4b4e upstream. The driver may sleep under a spin lock, and the function call path is: rtsx_exclusive_enter_ss (acquire the lock by spin_lock) rtsx_enter_ss rtsx_power_off_card xd_cleanup_work xd_delay_write xd_finish_write xd_copy_page wait_timeout schedule_timeout --> may sleep To fix it, "wait_timeout" is replaced with mdelay in xd_copy_page. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vegard Nossum authored
commit b0f5a8f3 upstream. This fixes a regression in commit 4d6501dc where I didn't notice that MIPS and OpenRISC were reinitialising p->{set,clear}_child_tid to NULL after our initialisation in copy_process(). We can simply get rid of the arch-specific initialisation here since it is now always done in copy_process() before hitting copy_thread{,_tls}(). Review notes: - As far as I can tell, copy_process() is the only user of copy_thread_tls(), which is the only caller of copy_thread() for architectures that don't implement copy_thread_tls(). - After this patch, there is no arch-specific code touching p->set_child_tid or p->clear_child_tid whatsoever. - It may look like MIPS/OpenRISC wanted to always have these fields be NULL, but that's not true, as copy_process() would unconditionally set them again _after_ calling copy_thread_tls() before commit 4d6501dc. Fixes: 4d6501dc ("kthread: Fix use-after-free if kthread fork fails") Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> # MIPS only Acked-by: Stafford Horne <shorne@gmail.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: Jonas Bonn <jonas@southpole.se> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: openrisc@lists.librecores.org Cc: Jamie Iles <jamie.iles@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vegard Nossum authored
commit 4d6501dc upstream. If a kthread forks (e.g. usermodehelper since commit 1da5c46f) but fails in copy_process() between calling dup_task_struct() and setting p->set_child_tid, then the value of p->set_child_tid will be inherited from the parent and get prematurely freed by free_kthread_struct(). kthread() - worker_thread() - process_one_work() | - call_usermodehelper_exec_work() | - kernel_thread() | - _do_fork() | - copy_process() | - dup_task_struct() | - arch_dup_task_struct() | - tsk->set_child_tid = current->set_child_tid // implied | - ... | - goto bad_fork_* | - ... | - free_task(tsk) | - free_kthread_struct(tsk) | - kfree(tsk->set_child_tid) - ... - schedule() - __schedule() - wq_worker_sleeping() - kthread_data(task)->flags // UAF The problem started showing up with commit 1da5c46f since it reused ->set_child_tid for the kthread worker data. A better long-term solution might be to get rid of the ->set_child_tid abuse. The comment in set_kthread_struct() also looks slightly wrong. Debugged-by: Jamie Iles <jamie.iles@oracle.com> Fixes: 1da5c46f ("kthread: Make struct kthread kmalloc'ed") Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jamie Iles <jamie.iles@oracle.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20170509073959.17858-1-vegard.nossum@oracle.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ritesh Harjani authored
commit b3193bc0 upstream. In below scenario blkio cgroup does not work as per their assigned weights :- 1. When the underlying device is nonrotational with a single HW queue with depth of >= CFQ_HW_QUEUE_MIN 2. When the use case is forming two blkio cgroups cg1(weight 1000) & cg2(wight 100) and two processes(file1 and file2) doing sync IO in their respective blkio cgroups. For above usecase result of fio (without this patch):- file1: (groupid=0, jobs=1): err= 0: pid=685: Thu Jan 1 19:41:49 1970 write: IOPS=1315, BW=41.1MiB/s (43.1MB/s)(1024MiB/24906msec) <...> file2: (groupid=0, jobs=1): err= 0: pid=686: Thu Jan 1 19:41:49 1970 write: IOPS=1295, BW=40.5MiB/s (42.5MB/s)(1024MiB/25293msec) <...> // both the process BW is equal even though they belong to diff. cgroups with weight of 1000(cg1) and 100(cg2) In above case (for non rotational NCQ devices), as soon as the request from cg1 is completed and even though it is provided with higher set_slice=10, because of CFQ algorithm when the driver tries to fetch the request, CFQ expires this group without providing any idle time nor weight priority and schedules another cfq group (in this case cg2). And thus both cfq groups(cg1 & cg2) keep alternating to get the disk time and hence loses the cgroup weight based scheduling. Below patch gives a chance to cfq algorithm (cfq_arm_slice_timer) to arm the slice timer in case group_idle is enabled. In case if group_idle is also not required (including for nonrotational NCQ drives), we need to explicitly set group_idle = 0 from sysfs for such cases. With this patch result of fio(for above usecase) :- file1: (groupid=0, jobs=1): err= 0: pid=690: Thu Jan 1 00:06:08 1970 write: IOPS=1706, BW=53.3MiB/s (55.9MB/s)(1024MiB/19197msec) <..> file2: (groupid=0, jobs=1): err= 0: pid=691: Thu Jan 1 00:06:08 1970 write: IOPS=1043, BW=32.6MiB/s (34.2MB/s)(1024MiB/31401msec) <..> // In this processes BW is as per their respective cgroups weight. Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit 16037643 upstream. On AMD/ATI controllers, the HD-audio controller driver allows a bus reset upon the error recovery, and its procedure includes the cancellation of pending jack polling work as found in snd_hda_bus_codec_reset(). This works usually fine, but it becomes a problem when the reset happens from the jack poll work itself; then calling cancel_work_sync() from the work being processed tries to wait the finish endlessly. As a workaround, this patch adds the check of current_work() and applies the cancel_work_sync() only when it's not from the jackpoll_work. This doesn't fix the root cause of the reported error below, but at least, it eases the unexpected stall of the whole system. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200937 Cc: <stable@vger.kernel.org> Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Felipe Balbi authored
commit 851a1511 upstream. DNV's iTCO is slightly different with SMBCTRL sitting at a different offset when compared to all other devices. Let's fix so that we can properly use iTCO watchdog. Fixes: 84d7f2eb ("i2c: i801: Add support for Intel DNV") Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Shubhrajyoti Datta authored
commit ae7304c3 upstream. Disable interrupts while configuring the transfer and enable them back. We have below as the programming sequence 1. start and slave address 2. byte count and stop In some customer platform there was a lot of interrupts between 1 and 2 and after slave address (around 7 clock cyles) if 2 is not executed then the transaction is nacked. To fix this case make the 2 writes atomic. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> [wsa: added a newline for better readability] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-