1. 04 Feb, 2003 19 commits
    • Duncan Sands's avatar
      [PATCH] USB speedtouch: earlier rejection of outgoing speedtouch packets · a16a8158
      Duncan Sands authored
        speedtouch: reject outgoing packets earlier when the firmware is not loaded.
      a16a8158
    • Duncan Sands's avatar
      [PATCH] USB speedtouch: allocate speedtouch send urbs in the USB probe routine · 905e6029
      Duncan Sands authored
        speedtouch: allocate send urbs in udsl_usb_probe rather than in udsl_usb_data_init.
        Since this diminishes udsl_usb_data_init down to almost nothing, roll it into the one
        place it was used.  Get rid of the semaphore Oliver put it - it is no longer needed.
      
      
       speedtouch.c |   86 ++++++++++++++++++++++++++---------------------------------
       1 files changed, 38 insertions(+), 48 deletions(-)
      905e6029
    • Duncan Sands's avatar
      [PATCH] USB speedtouch: tweak speedtouch status logic · e51f25e6
      Duncan Sands authored
        speedtouch: change data_started to firmware_loaded, which is what it actually
        means, plus some minor related changes.
      e51f25e6
    • Duncan Sands's avatar
      [PATCH] USB speedtouch: re-cosmetic speedtouch changes · 61f32857
      Duncan Sands authored
        speedtouch: a pile of cosmetic changes to make me feel happier (no code changes).
      61f32857
    • Duncan Sands's avatar
      [PATCH] USB speedtouch: re-wait for speedtouch completion handlers after usb_unlink_urb · 2119afc6
      Duncan Sands authored
        speedtouch: wait for receive urb completion handlers to finish after calling
        usb_unlink_urb.
      2119afc6
    • Duncan Sands's avatar
      [PATCH] USB speedtouch: re-recycle failed speedtouch receive urbs · 606febd3
      Duncan Sands authored
        speedtouch: more robust handling of receive urb failure: retry failed urbs whenever
        a new connection is opened.  This should work well with pppd's persist option.
      606febd3
    • Duncan Sands's avatar
      [PATCH] USB speedtouch: re-recycle speedtouch receive buffers · 5180c534
      Duncan Sands authored
      Rediffed version of the original patch - no sk_buff on the stack this time.
      
        speedtouch: recycle the receive urb's buffer.  Currently, every time a receive urb
          completes, its old buffer is thrown away and replaced with a new one.  This patch
          performs the minor changes needed to reuse the old buffer.
      5180c534
    • Duncan Sands's avatar
      [PATCH] USB speedtouch: let the tasklet do all processing of speedtouch receive urbs · b0e4361a
      Duncan Sands authored
        speedtouch: move all processing of receive urbs to udsl_atm_processqueue.  This has
        several advantages, as will be seen in the next few patches.  The most important is
        that it makes it easy to reuse of the urb's buffer (right now a new buffer is
        allocated every time the urb completes).  By the way, this patch is much smaller than
        it looks: most of the bulk is due to indentation changes.
      b0e4361a
    • Henning Meier-Geinitz's avatar
      [PATCH] USB scanner.c: Adjust syslog output · e7100fba
      Henning Meier-Geinitz authored
      This patch prints the vendor + product ids of the scanner after it has
      been successfully detected.
      
      Also the annoying error message about "Scanner device is already open"
      was downgraded to a dbg. Scanning for devices while one scanner device
      was open produced several 100 error messages in syslog.
      e7100fba
    • Henning Meier-Geinitz's avatar
      [PATCH] USB scanner.h, scanner.c: maintainer change · 80b5d998
      Henning Meier-Geinitz authored
      This patch changes the maintainer from Brian Beattie to Henning
      Meier-Geinitz and adds a link to the documentation and website.
      80b5d998
    • Matthew Dharm's avatar
    • Matthew Dharm's avatar
      [PATCH] usb-storage: convert spaces to tabs · d0a6840a
      Matthew Dharm authored
      This is a minor cleanup to convert 8 spaces into tabs.  There is no
      functional change here.
      d0a6840a
    • Matthew Dharm's avatar
      [PATCH] usb-storage: remove US_FL_DEV_ATTACHED · 196ef4e6
      Matthew Dharm authored
      This patch removes the US_FL_DEV_ATTACHED flag, which is now rendered
      obsolete by the new hotplug system.
      
      It also adds a comment or two about areas of code that need to be
      re-examined.
      196ef4e6
    • Matthew Dharm's avatar
      [PATCH] usb-storage: comments, cleanup · dc18a916
      Matthew Dharm authored
      This patch does the following:
      (o) Add comments showing what needs to be done to complete the hot-unplug
          system.
      (o) Add a BUG_ON() for (what is now) a critical failure case.
      (o) Make certain that a debug print happens even if a usb_get_intfdata()
          crashes.
      (o) Add an un-necessary up() to balance a down, for the auto-code-checkers.
      dc18a916
    • Matthew Dharm's avatar
      [PATCH] usb-storage: fix oops · 5d81afb2
      Matthew Dharm authored
      It should fix the OOPS on attach.
      
      This fixes a silly error where I fail to initialize a pointer early enough
      for the scanning code.  If this isn't a perfect example of why
      scsi_register() and scsi_add_host() aren't two separate functions, I don't
      know what is.  :)
      
      Oh, and I added a couple of comments, too.
      
        -  Fix an OOPS by moving the setting of the hostdata[] pointer to _before_
           the device scan starts.
      5d81afb2
    • Matthew Dharm's avatar
      [PATCH] usb-storage: fix typo · 55d2f9bb
      Matthew Dharm authored
      This patch goes on top of the last one.  It fixes a typo in the test for
      scsi_register() failure.
      
        -- reversed the logic of failure test for scsi_register()
      55d2f9bb
    • Matthew Dharm's avatar
      [PATCH] usb-storage: move to SCSI hotplugging · 82469dfd
      Matthew Dharm authored
      The attached patch is my first implementation of SCSI hotplugging.
      
      It's only been tested that it compiles, as I can't get the current
      linux-2.5 tree from linuxusb to boot.  It dies _very_ early.  Greg, I'm not
      sure if you'll want to apply this.  Linus seemed to want this very much,
      and it is 2.5.x... I say go for it, but I can understand if you have
      reservations.
      
      I would definately like to see this tested by anyone who can get a kernel
      to boot.
      
      This patch is quite large.  Lots of things had to be changed.  Among them:
      
      (o) The proc interface now uses the host number to look up the SCSI host
          structure, and then finds the usb-storage structure from that.
      (o) The SCSI interface has been changed.  The code flow is now much
          clearer, as more work is done from the USB probe/detach functions than
          from auxillary functions.
      (o) Names have been changed for newer conventions
      (o) GUIDs have been removed
      (o) The linked-list of devices has been removed, and it's associated
          semaphore
      (o) All code dealing with re-attaching a device to it's old association has
          been removed
      (o) Some spaces changed to tabs
      (o) usb-storage now takes one directory under /proc/scsi instead of
          one per virtual-HBA
      (o) All control threads now have the same name.  This could be changed back
          to the old behavior, if enough people want it.
      
      Known problems:
      (o) Testing, testing, testing
      (o) More dead code needs to be cut
      (o) It's a unclear how a LLD is supposed to cut off the flow of
          commands, so that the unregister() call always succeeds.  SCSI folks
          need to work on this.
      (o) Probing needs to be broken down into smaller functions, probably.
      82469dfd
    • Greg Kroah-Hartman's avatar
      [PATCH] USB: fix to get usb-storage code to work again. · 6a4f58ed
      Greg Kroah-Hartman authored
      Thanks to Matt Dharm and David Brownell for tracking this bug down.
      6a4f58ed
    • Greg Kroah-Hartman's avatar
  2. 01 Feb, 2003 2 commits
    • Duncan Sands's avatar
      [PATCH] USB speedtouch: add a new speedtouch encoding function · 18855eaf
      Duncan Sands authored
        speedtouch: add a new encoding function, atmsar_encode.  Calling it amounts to doing
        atmsar_encode_aal5 followed by atmsar_encode_rawcell in one fell swoop.  It eliminates
        the need for intermediate buffers and reduces memory movement.  The following patches
        use it to simplify the send logic (and get rid of those annoying little oopsen).
      18855eaf
    • David Brownell's avatar
      [PATCH] USB: ehci-hcd updates · fc42fcf3
      David Brownell authored
      This should apply to 2.5.59 too.  It seems to get rid of some pesky
      hangs, on at least some hardware, but I won't have time to test it
      on either VIA version ... maybe someone else will make the time?  :)
      
            New QH state prevents a re-activation race
      	- nobody can un-halt a qh before its cleanup is done
      	- resubmit-from-completion had this race (some usbtest cases)
      	  as could some normal submit paths on busy endpoints (storage)
      	- faster controllers would trip on this more consistently
      
            Queues of qtds
      	- work harder to avoid ever modifing any qh in software
      	- short reads block queue advance much less often
      	- be more cautious with large (>~19KB) unaligned buffers
      
            Unlinking urbs
      	- if qtd unlinked is at queue head, use its latest status
      	  (main effect is reporting bytes from partial transfers)
      	- another new qh state:  defer qh unlink if IAA is busy
      	  (eliminates a busy-wait loop in a rare scenario)
      
            Enable features to improve bus utilization
      	- PCI MWI ... can produce better write throughput; and by
      	  using right cacheline size, sometimes read throughput too
      	- USB NAK throttle ... sometimes reduces PCI access rates
      
            Other
      	- async dump shows more funky qh+qtd states, and NAK count
      	- cope with with some of the sprintf wierdness
      	- periodic dump is usually smaller (so is that schedule)
            	- minor cleanups
      fc42fcf3
  3. 29 Jan, 2003 2 commits
  4. 28 Jan, 2003 3 commits
    • David Brownell's avatar
      [PATCH] USB: usbcore misc cleanup (notably for non-dma hcds) · 31fd2ea0
      David Brownell authored
      The support for non-dma HCDs is likely the most interesting bit here.
      
          - makes dma calls behave sensibly when used with host controllers
            that don't use dma (including sl811).  usb_buffer_map() is a nop
            while scatterlist dma mappings fail (as they must).
      
          - make usb_sg_init() behave sensibly when used with non-dma hcs.
            the urbs are initted with transfer_buffer, not transfer_dma.
            this is the higher level analogue to usb_buffer_map(), so it
            needs to succeed unless there's a Real Error (tm).
      
          - moves two compatibility inlines from ehci.h into hcd.h so
            it'll be more practical to have the other hcds work in other
            environments (notably lk 2.4) too
      
          - remove URB_TIMEOUT_KILLED flag ... no device driver tests it;
            hcds don't really (uhci sets it, never reads it; sl811 doesn't
            enable the path that might set it), and it's not well defined.
            if any hcd needs such state, keep it in hc-private storage.
      
          - in usb_sg_wait(), use yield() instead of schedule() to let
            other activities free resources needed to continue.  (This
            was noted recently by Oliver.)
      31fd2ea0
    • David Brownell's avatar
      [PATCH] USB ohci-hcd, don't force SLAB_ATOMIC allocations · fb4b62ad
      David Brownell authored
      This is a minor cleanup to let per-request memory allocations block,
      when the caller allows (it provided the bitmask).  The driver used
      to work that way until something like 2.4.3; an update (a few months
      back) to how the "dma_addr_t" hashes to a "struct ohci_td *" lets us
      simplify things again.  Another benfit:  it blocks irqs for less time
      on the submit path.  (The ehci driver already acts this way.)
      fb4b62ad
    • Petko Manolov's avatar
      [PATCH] USB: pegasus & mii cset · 1fda844a
      Petko Manolov authored
        Some ethernet drivers other than those in .../drivers/net need generic
        MII code too and this cset shows how we do it for .../drivers/usb/net;
        For now only pegasus.c is using this feature, but as soon as we find
        more MII compliant controllers we'll put them in Makefile.mii too.
        Note: drivers which use the generic mii routines should bracket the
        code with #ifdef CONFIG_MII #endif since CONFIG_MII may not be present.
        See pegasus.c for more details.
      1fda844a
  5. 21 Jan, 2003 8 commits
  6. 17 Jan, 2003 4 commits
  7. 16 Jan, 2003 2 commits