- 10 Jan, 2007 10 commits
-
-
Tejun Heo authored
libata waits for !BSY even when the status register reports 0xff. This causes long boot delays when D8 isn't pulled down properly. This patch does the followings. * don't wait if status register is 0xff in all wait functions * make ata_busy_sleep() return 0 on success and -errno on failure. -ENODEV is returned on 0xff status and -EBUSY on other failures. * make ata_bus_softreset() succeed on 0xff status. 0xff status is not reset failure. It indicates no device. This removes unnecessary retries on such ports. Note that the code change assumes unoccupied port reporting 0xff status does not produce valid device signature. Signed-off-by:
Tejun Heo <htejun@gmail.com> Cc: Joe Jin <lkmaillist@gmail.com> Signed-off-by:
Jeff Garzik <jeff@garzik.org> Signed-off-by:
Chris Wright <chrisw@sous-sol.org>
-
John W. Linville authored
This reverts commit 4e1bbd84. Quoth Daniel Drake <dsd@gentoo.org>: "A user reported that commit 4e1bbd84 (Remove unneeded packed attributes) breaks the zd1211rw driver on ARM." Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Hans Verkuil authored
The TUNER_LG_NTSC_TAPE is identical in all respects to the TUNER_PHILIPS_FM1236_MK3. So use the params struct for the Philips tuner. Also add this LG_NTSC_TAPE tuner to the switches where radio specific parameters are set so it behaves like a TUNER_PHILIPS_FM1236_MK3. This change fixes the radio support for this tuner (the wrong bandswitch byte was used). Thanks to Andy Walls <cwalls@radix.net> for finding this bug. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Michael Krufky authored
In some cases when using VSB, the AGC status register has been known to falsely report "no signal" when in fact there is a carrier lock. The datasheet labels these status flags as QAM only, yet the lgdt330x module is using these flags for both QAM and VSB. This patch allows for the carrier recovery lock status register to be tested, even if the agc signal status register falsely reports no signal. Thanks to jcrews from #linuxtv in irc, for initially reporting this bug. Signed-off-by:
-
Andy Gospodarek authored
This is a small fix-up to finish out the work done by Jay Vosburgh to add carrier-state support for bonding devices. The output in /proc/net/bonding/bondX was correct, but when collecting the same info via an iotcl it could still be incorrect. Signed-off-by:
Andy Gospodarek <andy@greyhouse.net> Cc: Jeff Garzik <jeff@garzik.org> Cc: Stephen Hemminger <shemminger@osdl.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Arjan van de Ven authored
On the Core2 cpus, the rdtsc instruction is not serializing (as defined in the architecture reference since rdtsc exists) and due to the deep speculation of these cores, it's possible that you can observe time go backwards between cores due to this speculation. Since the kernel already deals with this with the SYNC_RDTSC flag, the solution is simple, only assume that the instruction is serializing on family 15... The price one pays for this is a slightly slower gettimeofday (by a dozen or two cycles), but that increase is quite small to pay for a really-going-forward tsc counter. Signed-off-by:
Arjan van de Ven <arjan@linux.intel.com> Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
-
Ulrich Kunitz authored
ieee80211softmac_wx_get_genie locks the associnfo mutex at function exit. This patch fixes it. The patch is against Linus' tree (commit af1713e0). Signed-off-by:
Ulrich Kunitz <kune@deine-taler.de> Signed-off-by:
Michael Buesch <mb@bu3sch.de> Signed-off-by:
-
Hugh Dickins authored
Ramiro Voicu hits the BUG_ON(!pte_none(*pte)) in zeromap_pte_range: kernel bugzilla 7645. Right: read_zero_pagealigned uses down_read of mmap_sem, but another thread's racing read of /dev/zero, or a normal fault, can easily set that pte again, in between zap_page_range and zeromap_page_range getting there. It's been wrong ever since 2.4.3. The simple fix is to use down_write instead, but that would serialize reads of /dev/zero more than at present: perhaps some app would be badly affected. So instead let zeromap_page_range return the error instead of BUG_ON, and read_zero_pagealigned break to the slower clear_user loop in that case - there's no need to optimize for it. Use -EEXIST for when a pte is found: BUG_ON in mmap_zero (the other user of zeromap_page_range), though it really isn't interesting there. And since mmap_zero wants -EAGAIN for out-of-memory, the zeromaps better return that than -ENOMEM. Signed-off-by:
Hugh Dickins <hugh@veritas.com> Cc: Ramiro Voicu: <Ramiro.Voicu@cern.ch> Cc: <stable@kernel.org> Signed-off-by:
-
Herbert Xu authored
The SHA384 block size should be 128 bytes, not 96 bytes. This was spotted by Andrew Donofrio. This breaks HMAC which uses the block size during setup and the final calculation. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Herbert Xu authored
As CBC is the default chaining method for cryptoloop, we should select it from cryptoloop to ease the transition. Spotted by Rene Herman. Signed-off-by:
-
- 11 Dec, 2006 30 commits
-
-
Chris Wright authored
-
David Miller authored
GLIBC uses them etc. They are guarded by ifndef __KERNEL__ so nobody will start accidently using them in the kernel again, it's just for userspace. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Daniel Barkalow authored
At least some nforce cards continue to send legacy interrupts when MSI is enabled, and these interrupts are treated as unhandled by the kernel. This patch disables legacy interrupts explicitly when enabling MSI mode. The correct fix is to change the MSI infrastructure to disable legacy interrupts when enabling MSI, but this is potentially risky if the device isn't PCI-2.3 or is quirky, so the correct fix is going into mainline, while patches like this one go into -stable. Legend has it that it is most correct to disable legacy interrupts before enabling MSI, but the mainline patch does it in the other order, and this patch is "obviously" the same as mainline. Signed-off-by:
Daniel Barkalow <barkalow@iabervon.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Greg KH <gregkh@suse.de> Signed-off-by:
-
Ravikiran G Thirumalai authored
2.6.19 stopped booting (or booted based on build/config) on our x86_64 systems due to a bug introduced in 2.6.19. check_nmi_watchdog schedules an IPI on all cpus to busy wait on a flag, but fails to set the busywait flag if NMI functionality is disabled. This causes the secondary cpus to spin in an endless loop, causing the kernel bootup to hang. Depending upon the build, the busywait flag got overwritten (stack variable) and caused the kernel to bootup on certain builds. Following patch fixes the bug by setting the busywait flag before returning from check_nmi_watchdog. I guess using a stack variable is not good here as the calling function could potentially return while the busy wait loop is still spinning on the flag. AK: I redid the patch significantly to be cleaner Signed-off-by:
Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by:
Shai Fultheim <shai@scalex86.org> Signed-off-by:
-
Hirokazu Takata authored
The m32r kernel 2.6.18-rc1 or after cause build errors of "unknown isa configuration" for userspace application programs, such as glibc, gdb, etc. This is because the recent kernel do not include linux/config.h not to expose kernel headers for userspace. To fix the above compile errors, this patch fixes two headers ptrace.h and sigcontext.h for m32r and makes them platform-independent. Signed-off-by:
Hirokazu Takata <takata@linux-m32r.org> Cc: <stable@kernel.org> Signed-off-by:
-
Zachary Amsden authored
It is possible to have tasklets get scheduled before softirqd has had a chance to spawn on all CPUs. This is totally harmless; after success during action CPU_UP_PREPARE, action CPU_ONLINE will be called, which immediately wakes softirqd on the appropriate CPU to process the already pending tasklets. So there is no danger of having a missed wakeup for any tasklets that were already pending. In particular, i386 is affected by this during startup, and is visible when using a very large initrd; during the time it takes for the initrd to be decompressed, a timer IRQ can come in and schedule RCU callbacks. It is also possible that resending of a hardware IRQ via a softirq triggers the same bug. Because of different timing conditions, this shows up in all emulators and virtual machines tested, including Xen, VMware, Virtual PC, and Qemu. It is also possible to trigger on native hardware with a large enough initrd, although I don't have a reliable case demonstrating that. Signed-off-by:
Zachary Amsden <zach@vmware.com> Cc: <caglar@pardus.org.tr> Cc: Ingo Molnar <mingo@elte.hu> Cc: <stable@kernel.org> Signed-off-by:
-
Jiri Kosina authored
When kernel is compiled with old version of autofs (CONFIG_AUTOFS_FS), and new (observed at least with 5.x.x) automount deamon is started, kernel correctly reports incompatible version of kernel and userland daemon, but then screws things up instead of correct handling of the error: autofs: kernel does not match daemon version ===================================== [ BUG: bad unlock balance detected! ] ------------------------------------- automount/4199 is trying to release lock (&type->s_umount_key) at: [<c0163b9e>] get_sb_nodev+0x76/0xa4 but there are no more locks to release! other info that might help us debug this: no locks held by automount/4199. stack backtrace: [<c0103b15>] dump_trace+0x68/0x1b2 [<c0103c77>] show_trace_log_lvl+0x18/0x2c [<c01041db>] show_trace+0xf/0x11 [<c010424d>] dump_stack+0x12/0x14 [<c012e02c>] print_unlock_inbalance_bug+0xe7/0xf3 [<c012fd4f>] lock_release+0x8d/0x164 [<c012b452>] up_write+0x14/0x27 [<c0163b9e>] get_sb_nodev+0x76/0xa4 [<c0163689>] vfs_kern_mount+0x83/0xf6 [<c016373e>] do_kern_mount+0x2d/0x3e [<c017513f>] do_mount+0x607/0x67a [<c0175224>] sys_mount+0x72/0xa4 [<c0102b96>] sysenter_past_esp+0x5f/0x99 DWARF2 unwinder stuck at sysenter_past_esp+0x5f/0x99 Leftover inexact backtrace: ======================= and then deadlock comes. The problem: autofs_fill_super() returns EINVAL to get_sb_nodev(), but before that, it calls kill_anon_super() to destroy the superblock which won't be needed. This is however way too soon to call kill_anon_super(), because get_sb_nodev() has to perform its own cleanup of the superblock first (deactivate_super(), etc.). The correct time to call kill_anon_super() is in the autofs_kill_sb() callback, which is called by deactivate_super() at proper time, when the superblock is ready to be killed. I can see the same faulty codepath also in autofs4. This patch solves issues in both filesystems in a same way - it postpones the kill_anon_super() until the proper time is signalized by deactivate_super() calling the kill_sb() callback. [raven@themaw.net: update comment] Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Acked-by:
Ian Kent <raven@themaw.net> Cc: <stable@kernel.org> Signed-off-by:
-
Rafael J Wysocki authored
The 'testproc' swsusp debug mode thaws tasks twice in a row, which is _very_ confusing. Fix that. Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Acked-by:
Pavel Machek <pavel@ucw.cz> Cc: <stable@kernel.org> Signed-off-by:
-
Andrey Mirkin authored
OpenVZ Linux kernel team has found a problem with mounting in compat mode. Simple command "mount -t smbfs ..." on Fedora Core 5 distro in 32-bit mode leads to oops: Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP: [<ffffffff802bc7c6>] compat_sys_mount+0xd6/0x290 PGD 34d48067 PUD 34d03067 PMD 0 Oops: 0000 [1] SMP CPU: 0 Modules linked in: iptable_nat simfs smbfs ip_nat ip_conntrack vzdquota parport_pc lp parport 8021q bridge llc vznetdev vzmon nfs lockd sunrpc vzdev iptable_filter af_packet xt_length ipt_ttl xt_tcpmss ipt_TCPMSS iptable_mangle xt_limit ipt_tos ipt_REJECT ip_tables x_tables thermal processor fan button battery asus_acpi ac uhci_hcd ehci_hcd usbcore i2c_i801 i2c_core e100 mii floppy ide_cd cdrom Pid: 14656, comm: mount RIP: 0060:[<ffffffff802bc7c6>] [<ffffffff802bc7c6>] compat_sys_mount+0xd6/0x290 RSP: 0000:ffff810034d31f38 EFLAGS: 00010292 RAX: 000000000000002c RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff810034c86bc0 RSI: 0000000000000096 RDI: ffffffff8061fc90 RBP: ffff810034d31f78 R08: 0000000000000000 R09: 000000000000000d R10: ffff810034d31e58 R11: 0000000000000001 R12: ffff810039dc3000 R13: 000000000805ea48 R14: 0000000000000000 R15: 00000000c0ed0000 FS: 0000000000000000(0000) GS:ffffffff80749000(0033) knlGS:00000000b7d556b0 CS: 0060 DS: 007b ES: 007b CR0: 000000008005003b CR2: 0000000000000000 CR3: 0000000034d43000 CR4: 00000000000006e0 Process mount (pid: 14656, veid=300, threadinfo ffff810034d30000, task ffff810034c86bc0) Stack: 0000000000000000 ffff810034dd0000 ffff810034e4a000 000000000805ea48 0000000000000000 0000000000000000 0000000000000000 0000000000000000 000000000805ea48 ffffffff8021e64e 0000000000000000 0000000000000000 Call Trace: [<ffffffff8021e64e>] ia32_sysret+0x0/0xa Code: 83 3b 06 0f 85 41 01 00 00 0f b7 43 0c 89 43 14 0f b7 43 0a RIP [<ffffffff802bc7c6>] compat_sys_mount+0xd6/0x290 RSP <ffff810034d31f38> CR2: 0000000000000000 The problem is that data_page pointer can be NULL, so we should skip data conversion in this case. Signed-off-by:
Andrey Mirkin <amirkin@openvz.org> Cc: <stable@kernel.org> Signed-off-by:
-
Andrew Morton authored
Fix http://bugzilla.kernel.org/show_bug.cgi?id=7606 WARNING: "drm_sman_set_manager" [drivers/char/drm/sis.ko] undefined! Cc: <daniel-silveira@gee.inatel.br> Cc: Dave Airlie <airlied@linux.ie> Cc: <stable@kernel.org> Signed-off-by:
-
Andrew Morton authored
With CONFIG_SMP=n: drivers/input/ff-memless.c:384: warning: implicit declaration of function 'local_bh_disable' drivers/input/ff-memless.c:393: warning: implicit declaration of function 'local_bh_enable' Really linux/spinlock.h should include linux/interrupt.h. But interrupt.h includes sched.h which will need spinlock.h. So the patch breaks the _bh declarations out into a separate header and includes it in bothj interrupt.h and spinlock.h. Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Cc: Andi Kleen <ak@suse.de> Cc: <stable@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Thomas Graf authored
Restore API compatibility due to bits moved from rtnetlink.h to separate headers. Signed-off-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
-
Jeet Chaudhuri authored
We must reserve SAR + MAX_HEADER bytes for IrLMP to fit in. This fixes an oops reported (and fixed) by Jeet Chaudhuri, when max_sdu_size is greater than 0. Signed-off-by:
Samuel Ortiz <samuel@sortiz.org> Signed-off-by:
-
David Miller authored
We grab a reference to the route's inetpeer entry but forget to release it in xfrm4_dst_destroy(). Bug discovered by Kazunori MIYAZAWA <kazunori@miyazawa.org> Signed-off-by:
-
Sean Young authored
The PhidgetServo causes an Oops when any of its sysfs attributes are read or written too, making the driver useless. Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
Patrick McHardy authored
Currently the behaviour of disable_xfrm is inconsistent between locally generated and forwarded packets. For locally generated packets disable_xfrm disables the policy lookup if it is set on the output device, for forwarded traffic however it looks at the input device. This makes it impossible to disable xfrm on all devices but a dummy device and use normal routing to direct traffic to that device. Always use the output device when checking disable_xfrm. Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
-
David Miller authored
ip_summed changes last summer had missed that one. As the result, we have ip_summed interpreted as CHECKSUM_PARTIAL now. IOW, ->csum is interpreted as offset of checksum in the packet. net/core/* will both read and modify the value as that offset, with obvious reasons. At the very least it's a remote memory corruptor. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Alexey Dobriyan authored
On Sat, Dec 02, 2006 at 11:47:44PM +0300, Alexey Dobriyan wrote: > David Binderman compiled 2.6.19 with icc and grepped for "was set but never > used". Many warnings are on > http://coderock.org/kj/unused-2.6.19-fs Heh, the very first line: fs/exec.c(1465): remark #593: variable "flag" was set but never used fs/exec.c: 1477 /* 1478 * We cannot trust fsuid as being the "true" uid of the 1479 * process nor do we know its entire history. We only know it 1480 * was tainted so we dump it as root in mode 2. 1481 */ 1482 if (mm->dumpable == 2) { /* Setuid core dump mode */ 1483 flag = O_EXCL; /* Stop rewrite attacks */ 1484 current->fsuid = 0; /* Dump root private */ 1485 } And then filp_open follows with "flag" totally ignored. Signed-off-by:
-
Michael S Tsirkin authored
ib_ucm_cleanup_events() holds file_mutex while calling ib_destroy_cm_id(). This can deadlock since ib_destroy_cm_id() flushes event handlers, and ib_ucm_event_handler() needs file_mutex, too. Therefore, drop the file_mutex during the call to ib_destroy_cm_id(). Signed-off-by:
Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by:
Roland Dreier <rolandd@cisco.com> Acked-by:
Sean Hefty <sean.hefty@intel.com> Signed-off-by:
-
Maxime Austruy authored
Routine ieee80211softmac_wx_set_mlme has one return that fails to release a mutex acquired at entry. Signed-off-by:
Maxime Austruy <maxime@tralhalla.org> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Bart De Schuymer authored
The attached patch resolves an issue where a IP DNATed packet with a martian source is forwarded while it's better to drop it. It also resolves messages complaining about ip forwarding being disabled while it's actually enabled. Thanks to lepton <ytht.net@gmail.com> for reporting this problem. This is probably a candidate for the -stable release. Signed-off-by:
Bart De Schuymer <bdschuym@pandora.be> Signed-off-by:
-
Dmitry Mishin authored
In compat mode, matches and targets valid hooks checks always successful due to not initialized e->comefrom field yet. This patch separates this checks from translation code and moves them after mark_source_chains() call, where these marks are initialized. Signed-off-by:
Dmitry Mishin <dim@openvz.org> Signed-off-by; Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Dmitry Mishin authored
Commit 590bdf7f introduced a regression in match/target hook validation. mark_source_chains builds a bitmask for each rule representing the hooks it can be reached from, which is then used by the matches and targets to make sure they are only called from valid hooks. The patch moved the match/target specific validation before the mark_source_chains call, at which point the mask is always zero. This patch returns back to the old order and moves the standard checks to mark_source_chains. This allows to get rid of a special case for standard targets as a nice side-effect. Signed-off-by:
-
Jurij Smakov authored
The following patch fixes the failure of sunhme drivers on x86 hosts due to missing pci_enable_device() and pci_set_master() calls, lost during code refactoring. It has been filed as bugzilla bug #7502 [0] and Debian bug #397460 [1]. [0] http://bugzilla.kernel.org/show_bug.cgi?id=7502 [1] http://bugs.debian.org/397460Signed-off-by:
Jurij Smakov <jurij@wooyd.org> Signed-off-by:
-
David Miller authored
Not returning -EINVAL, because someone might want to use the value zero in some future gact_prob algorithm? Signed-off-by:
Kim Nordlund <kim.nordlund@nokia.com> Signed-off-by:
-
Len Brown authored
This reverts commit 281ea49b, which broke ACPI Interrupt source overrides that move the SCI from one IRQ in PIC mode to another in IOAPIC mode. If the SCI shared an interrupt line with another device, this would result in a "irq 18: nobody cared" type failure. http://bugzilla.kernel.org/show_bug.cgi?id=7601Signed-off-by:
Len Brown <len.brown@intel.com> Signed-off-by:
-
Herbert Xu authored
As CBC is the default chaining method for cryptoloop, we should select it from cryptoloop to ease the transition. Signed-off-by:
-
Patrick McHardy authored
The tc actions increased the size of struct tc_police, which broke compatibility with old iproute binaries since both the act_police and the old NET_CLS_POLICE code check for an exact size match. Since the new members are not even used, the simple fix is to also accept the size of the old structure. Dumping is not affected since old userspace will receive a bigger structure, which is handled fine. Signed-off-by:
Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
No need to revisit a chain we'd already finished with during the check for current hook. It's either instant loop (which we'd just detected) or a duplicate work. Signed-off-by:
-
