- 24 Apr, 2018 40 commits
-
-
Dan Williams authored
commit 4f867220 upstream. The following NULL dereference results from incorrectly assuming that ndd is valid in this print: struct nvdimm_drvdata *ndd = to_ndd(&nd_region->mapping[i]); /* * Give up if we don't find an instance of a uuid at each * position (from 0 to nd_region->ndr_mappings - 1), or if we * find a dimm with two instances of the same uuid. */ dev_err(&nd_region->dev, "%s missing label for %pUb\n", dev_name(ndd->dev), nd_label->uuid); BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 IP: nd_region_register_namespaces+0xd67/0x13c0 [libnvdimm] PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 43 PID: 673 Comm: kworker/u609:10 Not tainted 4.16.0-rc4+ #1 [..] RIP: 0010:nd_region_register_namespaces+0xd67/0x13c0 [libnvdimm] [..] Call Trace: ? devres_add+0x2f/0x40 ? devm_kmalloc+0x52/0x60 ? nd_region_activate+0x9c/0x320 [libnvdimm] nd_region_probe+0x94/0x260 [libnvdimm] ? kernfs_add_one+0xe4/0x130 nvdimm_bus_probe+0x63/0x100 [libnvdimm] Switch to using the nvdimm device directly. Fixes: 0e3b0d12 ("libnvdimm, namespace: allow multiple pmem...") Cc: <stable@vger.kernel.org> Reported-by:
Dave Jiang <dave.jiang@intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Maxime Jayat authored
commit c5637476 upstream. Despite the efforts made to correctly read the NDA and CUBC registers, the order in which the registers are read could sometimes lead to an inconsistent state. Re-using the timeline from the comments, this following timing of registers reads could lead to reading NDA with value "@desc2" and CUBC with value "MAX desc1": INITD -------- ------------ |____________________| _______________________ _______________ NDA @desc2 \/ @desc3 _______________________/\_______________ __________ ___________ _______________ CUBC 0 \/ MAX desc1 \/ MAX desc2 __________/\___________/\_______________ | | | | Events:(1)(2) (3)(4) (1) check_nda = @desc2 (2) initd = 1 (3) cur_ubc = MAX desc1 (4) cur_nda = @desc2 This is allowed by the condition ((check_nda == cur_nda) && initd), despite cur_ubc and cur_nda being in the precise state we don't want. This error leads to incorrect residue computation. Fix it by inversing the order in which CUBC and INITD are read. This makes sure that NDA and CUBC are always read together either _before_ INITD goes to 0 or _after_ it is back at 1. The case where NDA is read before INITD is at 0 and CUBC is read after INITD is back at 1 will be rejected by check_nda and cur_nda being different. Fixes: 53398f48 ("dmaengine: at_xdmac: fix residue corruption") Cc: stable@vger.kernel.org Signed-off-by:
Maxime Jayat <maxime.jayat@mobile-devices.fr> Acked-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Bart Van Assche authored
commit 3a148896 upstream. Ensure that cv_end is equal to ibdev->num_comp_vectors for the NUMA node with the highest index. This patch improves spreading of RDMA channels over completion vectors and thereby improves performance, especially on systems with only a single NUMA node. This patch drops support for the comp_vector login parameter by ignoring the value of that parameter since I have not found a good way to combine support for that parameter and automatic spreading of RDMA channels over completion vectors. Fixes: d92c0da7 ("IB/srp: Add multichannel support") Reported-by:
Alexander Schmid <alex@modula-shop-systems.de> Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: Alexander Schmid <alex@modula-shop-systems.de> Cc: stable@vger.kernel.org Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Bart Van Assche authored
commit e68088e7 upstream. Before commit e494f6a7 ("[SCSI] improved eh timeout handler") it did not really matter whether or not abort handlers like srp_abort() called .scsi_done() when returning another value than SUCCESS. Since that commit however this matters. Hence only call .scsi_done() when returning SUCCESS. Signed-off-by:
-
Takashi Iwai authored
commit a820ccbe upstream. The PCM runtime object is created and freed dynamically at PCM stream open / close time. This is tracked via substream->runtime, and it's cleared at snd_pcm_detach_substream(). The runtime object assignment is protected by PCM open_mutex, so for all PCM operations, it's safely handled. However, each PCM substream provides also an ALSA timer interface, and user-space can access to this while closing a PCM substream. This may eventually lead to a UAF, as snd_pcm_timer_resolution() tries to access the runtime while clearing it in other side. Fortunately, it's the only concurrent access from the PCM timer, and it merely reads runtime->timer_resolution field. So, we can avoid the race by reordering kfree() and wrapping the substream->runtime clearance with the corresponding timer lock. Reported-by: syzbot+8e62ff4e07aa2ce87826@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Bart Van Assche authored
commit a6544a62 upstream. This patch avoids that KASAN reports the following when the SRP initiator calls srp_post_send(): ================================================================== BUG: KASAN: stack-out-of-bounds in rxe_post_send+0x5c4/0x980 [rdma_rxe] Read of size 8 at addr ffff880066606e30 by task 02-mq/1074 CPU: 2 PID: 1074 Comm: 02-mq Not tainted 4.16.0-rc3-dbg+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0x85/0xc7 print_address_description+0x65/0x270 kasan_report+0x231/0x350 rxe_post_send+0x5c4/0x980 [rdma_rxe] srp_post_send.isra.16+0x149/0x190 [ib_srp] srp_queuecommand+0x94d/0x1670 [ib_srp] scsi_dispatch_cmd+0x1c2/0x550 [scsi_mod] scsi_queue_rq+0x843/0xa70 [scsi_mod] blk_mq_dispatch_rq_list+0x143/0xac0 blk_mq_do_dispatch_ctx+0x1c5/0x260 blk_mq_sched_dispatch_requests+0x2bf/0x2f0 __blk_mq_run_hw_queue+0xdb/0x160 __blk_mq_delay_run_hw_queue+0xba/0x100 blk_mq_run_hw_queue+0xf2/0x190 blk_mq_sched_insert_request+0x163/0x2f0 blk_execute_rq+0xb0/0x130 scsi_execute+0x14e/0x260 [scsi_mod] scsi_probe_and_add_lun+0x366/0x13d0 [scsi_mod] __scsi_scan_target+0x18a/0x810 [scsi_mod] scsi_scan_target+0x11e/0x130 [scsi_mod] srp_create_target+0x1522/0x19e0 [ib_srp] kernfs_fop_write+0x180/0x210 __vfs_write+0xb1/0x2e0 vfs_write+0xf6/0x250 SyS_write+0x99/0x110 do_syscall_64+0xee/0x2b0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 The buggy address belongs to the page: page:ffffea0001998180 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x4000000000000000() raw: 4000000000000000 0000000000000000 0000000000000000 00000000ffffffff raw: dead000000000100 dead000000000200 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff880066606d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 ffff880066606d80: f1 00 f2 f2 f2 f2 f2 f2 f2 00 00 f2 f2 f2 f2 f2 >ffff880066606e00: f2 00 00 00 00 00 f2 f2 f2 f3 f3 f3 f3 00 00 00 ^ ffff880066606e80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff880066606f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== Fixes: 8700e3e7 ("Soft RoCE driver") Signed-off-by:
-
Roland Dreier authored
commit 8435168d upstream. Check to make sure that ctx->cm_id->device is set before we use it. Otherwise userspace can trigger a NULL dereference by doing RDMA_USER_CM_CMD_SET_OPTION on an ID that is not bound to a device. Cc: <stable@vger.kernel.org> Reported-by: <syzbot+a67bc93e14682d92fc2f@syzkaller.appspotmail.com> Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Theodore Ts'o authored
commit 8e4b5eae upstream. If the root directory has an i_links_count of zero, then when the file system is mounted, then when ext4_fill_super() notices the problem and tries to call iput() the root directory in the error return path, ext4_evict_inode() will try to free the inode on disk, before all of the file system structures are set up, and this will result in an OOPS caused by a NULL pointer dereference. This issue has been assigned CVE-2018-1092. https://bugzilla.kernel.org/show_bug.cgi?id=199179 https://bugzilla.redhat.com/show_bug.cgi?id=1560777Reported-by:
Wen Xu <wen.xu@gatech.edu> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Signed-off-by:
-
Eryu Guan authored
commit 73fdad00 upstream. i_disksize update should be protected by i_data_sem, by either taking the lock explicitly or by using ext4_update_i_disksize() helper. But the i_disksize updates in ext4_direct_IO_write() are not protected at all, which may be racing with i_disksize updates in writeback path in delalloc buffer write path. This is found by code inspection, and I didn't hit any i_disksize corruption due to this bug. Thanks to Jan Kara for catching this bug and suggesting the fix! Reported-by:
Jan Kara <jack@suse.cz> Suggested-by:
Eryu Guan <guaneryu@gmail.com> Signed-off-by:
-
Theodore Ts'o authored
commit 044e6e3d upstream. When reading the inode or block allocation bitmap, if the bitmap needs to be initialized, do not update the checksum in the block group descriptor. That's because we're not set up to journal those changes. Instead, just set the verified bit on the bitmap block, so that it's not necessary to validate the checksum. When a block or inode allocation actually happens, at that point the checksum will be calculated, and update of the bg descriptor block will be properly journalled. Signed-off-by:
-
Theodore Ts'o authored
commit 85e0c4e8 upstream. This updates the jbd2 superblock unnecessarily, and on an abort we shouldn't truncate the log. Signed-off-by:
-
Theodore Ts'o authored
commit 9f886f4d upstream. This fixes a harmless UBSAN where root could potentially end up causing an overflow while bumping the entropy_total field (which is ignored once the entropy pool has been initialized, and this generally is completed during the boot sequence). This is marginal for the stable kernel series, but it's a really trivial patch, and it fixes UBSAN warning that might cause security folks to get overly excited for no reason. Signed-off-by:
Chen Feng <puck.chen@hisilicon.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Aniruddha Banerjee authored
commit aa08192a upstream. Most MMIO GIC register accesses use a 1-hot bit scheme that avoids requiring any form of locking. This isn't true for the GICD_ICFGRn registers, which require a RMW sequence. Unfortunately, we seem to be missing a lock for these particular accesses, which could result in a race condition if changing the trigger type on any two interrupts within the same set of 16 interrupts (and thus controlled by the same CFGR register). Introduce a private lock in the GIC common comde for this particular case, making it cover both GIC implementations in one go. Cc: stable@vger.kernel.org Signed-off-by:
Aniruddha Banerjee <aniruddhab@nvidia.com> [maz: updated changelog] Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Mika Westerberg authored
commit f2a659f7 upstream. The driver misses implementation of PM hook that undoes what ->freeze_noirq() does after the hibernation image is created. This means the control channel is not resumed properly and the Thunderbolt bus becomes useless in later stages of hibernation (when the image is stored or if the operation fails). Fix this by pointing ->thaw_noirq to driver nhi_resume_noirq(). This makes sure the control channel is resumed properly. Fixes: 23dd5bb4 ("thunderbolt: Add suspend/hibernate support") Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
James Kelly authored
commit a01df75c upstream. SSM2602 driver is broken on recent kernels (at least since 4.9). User space applications such as amixer or alsamixer get EIO when attempting to access codec controls via the relevant IOCTLs. Root cause of these failures is the regcache_hw_init function in drivers/base/regmap/regcache.c, which prevents regmap cache initalization from the reg_defaults_raw element of the regmap_config structure when registers are write only. It also disables the regmap cache entirely when all registers are write only or volatile as is the case for the SSM2602 driver. Using the reg_defaults element of the regmap_config structure rather than the reg_defaults_raw element to initalize the regmap cache avoids the logic in the regcache_hw_init function entirely. It also makes this driver consistent with other ASoC codec drivers, as this driver was the ONLY codec driver that used the reg_defaults_raw element to initalize the cache. Tested on Digilent Zybo Z7 development board which has a SSM2603 codec chip connected to a Xilinx Zynq SoC. Signed-off-by:
James Kelly <jamespeterkelly@gmail.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Aaron Ma authored
commit 6de0b13c upstream. When size is negative, calling memset will make segment fault. Declare the size as type u32 to keep memset safe. size in struct hid_report is unsigned, fix return type of hid_report_len to u32. Cc: stable@vger.kernel.org Signed-off-by:
Aaron Ma <aaron.ma@canonical.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Aaron Ma authored
commit 3064a03b upstream. Follow the change of return type u32 of hid_report_len, fix all the types of variables those get the return value of hid_report_len to u32, and all other code already uses u32. Cc: stable@vger.kernel.org Signed-off-by:
-
Nicholas Piggin authored
commit 3b807033 upstream. The OPAL NVRAM driver does not sleep in case it gets OPAL_BUSY or OPAL_BUSY_EVENT from firmware, which causes large scheduling latencies, and various lockup errors to trigger (again, BMC reboot can cause it). Fix this by converting it to the standard form OPAL_BUSY loop that sleeps. Fixes: 628daa8d ("powerpc/powernv: Add RTC and NVRAM support plus RTAS fallbacks") Depends-on: 34dd25de ("powerpc/powernv: define a standard delay for OPAL_BUSY type retry loops") Cc: stable@vger.kernel.org # v3.2+ Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Nicholas Piggin authored
commit 34dd25de upstream. This is the start of an effort to tidy up and standardise all the delays. Existing loops have a range of delay/sleep periods from 1ms to 20ms, and some have no delay. They all loop forever except rtc, which times out after 10 retries, and that uses 10ms delays. So use 10ms as our standard delay. The OPAL maintainer agrees 10ms is a reasonable starting point. The idea is to use the same recipe everywhere, once this is proven to work then it will be documented as an OPAL API standard. Then both firmware and OS can agree, and if a particular call needs something else, then that can be documented with reasoning. This is not the end-all of this effort, it's just a relatively easy change that fixes some existing high latency delays. There should be provision for standardising timeouts and/or interruptible loops where possible, so non-fatal firmware errors don't cause hangs. Signed-off-by:
-
Nicholas Piggin authored
commit 0bfdf598 upstream. asm/barrier.h is not always included after asm/synch.h, which meant it was missing __SUBARCH_HAS_LWSYNC, so in some files smp_wmb() would be eieio when it should be lwsync. kernel/time/hrtimer.c is one case. __SUBARCH_HAS_LWSYNC is only used in one place, so just fold it in to where it's used. Previously with my small simulator config, 377 instances of eieio in the tree. After this patch there are 55. Fixes: 46d075be ("powerpc: Optimise smp_wmb") Cc: stable@vger.kernel.org # v2.6.29+ Signed-off-by:
-
Nicholas Piggin authored
commit 741de617 upstream. opal_nvram_write currently just assumes success if it encounters an error other than OPAL_BUSY or OPAL_BUSY_EVENT. Have it return -EIO on other errors instead. Fixes: 628daa8d ("powerpc/powernv: Add RTC and NVRAM support plus RTAS fallbacks") Cc: stable@vger.kernel.org # v3.2+ Signed-off-by:
Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Acked-by:
Stewart Smith <stewart@linux.ibm.com> Signed-off-by:
-
Aaron Ma authored
commit ac75a041 upstream. When convert char array with signed int, if the inbuf[x] is negative then upper bits will be set to 1. Fix this by using u8 instead of char. ret_size has to be at least 3, hid_input_report use it after minus 2 bytes. Cc: stable@vger.kernel.org Signed-off-by:
-
Steve French authored
commit 7ea884c7 upstream. Some servers return inode number zero for the root directory, which causes ls to display incorrect data (missing "." and ".."). If the server returns zero for the inode number of the root directory, fake an inode number for it. Signed-off-by:
Steve French <smfrench@gmail.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
-
Thinh Nguyen authored
commit cabdf83d upstream. Platform device is allocated before adding resources. Make sure to properly cleanup on error case. Cc: <stable@vger.kernel.org> Fixes: f1c7e710 ("usb: dwc3: convert to pcim_enable_device()") Signed-off-by:
Thinh Nguyen <thinhn@synopsys.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Zhengjun Xing authored
commit 64627388 upstream. USB3 hubs don't support global suspend. USB3 specification 10.10, Enhanced SuperSpeed hubs only support selective suspend and resume, they do not support global suspend/resume where the hub downstream facing ports states are not affected. When system enters hibernation it first enters freeze process where only the root hub enters suspend, usb_port_suspend() is not called for other devices, and suspend status flags are not set for them. Other devices are expected to suspend globally. Some external USB3 hubs will suspend the downstream facing port at global suspend. These devices won't be resumed at thaw as the suspend status flag is not set. A USB3 removable hard disk connected through a USB3 hub that won't resume at thaw will fail to synchronize SCSI cache, return “cmd cmplt err -71” error, and needs a 60 seconds timeout which causing system hang for 60s before the USB host reset the port for the USB3 removable hard disk to recover. Fix this by always calling usb_port_suspend() during freeze for USB3 devices. Signed-off-by:
Zhengjun Xing <zhengjun.xing@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Yavuz, Tuba authored
commit 7fafcfdf upstream. It looks like there is a possibility of a double-free vulnerability on an error path of the f_midi_set_alt function in the f_midi driver. If the path is feasible then free_ep_req gets called twice: req->complete = f_midi_complete; err = usb_ep_queue(midi->out_ep, req, GFP_ATOMIC); => ... usb_gadget_giveback_request => f_midi_complete (CALLBACK) (inside f_midi_complete, for various cases of status) free_ep_req(ep, req); // first kfree if (err) { ERROR(midi, "%s: couldn't enqueue request: %d\n", midi->out_ep->name, err); free_ep_req(midi->out_ep, req); // second kfree return err; } The double-free possibility was introduced with commit ad0d1a05 ("usb: gadget: f_midi: fix leak on failed to enqueue out requests"). Found by MOXCAFE tool. Signed-off-by:
Tuba Yavuz <tuba@ece.ufl.edu> Fixes: ad0d1a05 ("usb: gadget: f_midi: fix leak on failed to enqueue out requests") Acked-by:
-
Mika Westerberg authored
commit 13d3047c upstream. Mike Lothian reported that plugging in a USB-C device does not work properly in his Dell Alienware system. This system has an Intel Alpine Ridge Thunderbolt controller providing USB-C functionality. In these systems the USB controller (xHCI) is hotplugged whenever a device is connected to the port using ACPI-based hotplug. The ACPI description of the root port in question is as follows: Device (RP01) { Name (_ADR, 0x001C0000) Device (PXSX) { Name (_ADR, 0x02) Method (_RMV, 0, NotSerialized) { // ... } } Here _ADR 0x02 means device 0, function 2 on the bus under root port (RP01) but that seems to be incorrect because device 0 is the upstream port of the Alpine Ridge PCIe switch and it has no functions other than 0 (the bridge itself). When we get ACPI Notify() to the root port resulting from connecting a USB-C device, Linux tries to read PCI_VENDOR_ID from device 0, function 2 which of course always returns 0xffffffff because there is no such function and we never find the device. In Windows this works fine. Now, since we get ACPI Notify() to the root port and not to the PXSX device we should actually start our scan from there as well and not from the non-existent PXSX device. Fix this by checking presence of the slot itself (function 0) if we fail to do that otherwise. While there use pci_bus_read_dev_vendor_id() in get_slot_status(), which is the recommended way to read Device and Vendor IDs of devices on PCI buses. Link: https://bugzilla.kernel.org/show_bug.cgi?id=198557Reported-by:
Mike Lothian <mike@fireburn.co.uk> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Hans de Goede authored
commit bbf03861 upstream. Just like many other Samsung models, the 670Z5E needs to use the acpi-video backlight interface rather then the native one for backlight control to work, add a quirk for this. Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1557060 Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Dan Carpenter authored
commit f00e7109 upstream. We're supposed to be checking that "val_len" is not too large but instead we check if it is smaller than the max. The only function affected would be regmap_i2c_smbus_i2c_write() in drivers/base/regmap/regmap-i2c.c. Strangely that function has its own limit check which returns an error if (count >= I2C_SMBUS_BLOCK_MAX) so it doesn't look like it has ever been able to do anything except return an error. Fixes: c335931e ("regmap: Add raw_write/read checks for max_raw_write/read sizes") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Jason Andryuk authored
commit c2d2e673 upstream. A toolstack may delete the vif frontend and backend xenstore entries while xen-netfront is in the removal code path. In that case, the checks for xenbus_read_driver_state would return XenbusStateUnknown, and xennet_remove would hang indefinitely. This hang prevents system shutdown. xennet_remove must be able to handle XenbusStateUnknown, and netback_changed must also wake up the wake_queue for that state as well. Fixes: 5b5971df ("xen-netfront: remove warning when unloading module") Signed-off-by:
Jason Andryuk <jandryuk@gmail.com> Cc: Eduardo Otubo <otubo@redhat.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
Maxime Chevallier authored
commit ce99319a upstream. When SPI transfers can be offloaded using DMA, the SPI core need to build a scatterlist to make sure that the buffer to be transferred is dma-able. This patch fixes the scatterlist entry size computation in the case where the maximum acceptable scatterlist entry supported by the DMA controller is less than PAGE_SIZE, when the buffer is vmalloced. For each entry, the actual size is given by the minimum between the desc_len (which is the max buffer size supported by the DMA controller) and the remaining buffer length until we cross a page boundary. Fixes: 65598c13 ("spi: Fix per-page mapping of unaligned vmalloc-ed buffer") Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
-
Santiago Esteban authored
commit 9a06757d upstream. The compatible string is incorrect. Add atmel,sama5d3-pinctrl since it's the appropriate compatible string. Remove the atmel,at91rm9200-pinctrl compatible string, this fallback is useless, there are too many changes. Signed-off-by:
Santiago Esteban <Santiago.Esteban@microchip.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Marek Szyprowski authored
commit 6f487075 upstream. The proper name for the property, which assign given device to IOMMU is 'iommus', not 'iommu'. Fix incorrect name and let all GScaler devices to be properly handled when IOMMU support is enabled. Reported-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 6cbfdd73 ("ARM: dts: add sysmmu nodes for exynos5250") Cc: <stable@vger.kernel.org> # v4.8+ Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Nicolas Ferre authored
commit e8fd0adf upstream. There are only 19 PIOB pins having primary names PB0-PB18. Not all of them have a 'C' function. So the pinctrl property mask ends up being the same as the other SoC of the at91sam9x5 series. Reported-by:
Marek Sieranski <marek.sieranski@microchip.com> Signed-off-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Cc: <stable@vger.kernel.org> # v3.8+ Signed-off-by:
-
Felipe Balbi authored
commit eaa358c7 upstream. Mention that ->complete() should never be called from within usb_ep_queue(). Signed-off-by:
-
Heinrich Schuchardt authored
commit af6f8529 upstream. musb->endpoints[] has array size MUSB_C_NUM_EPS. We must check array bounds before accessing the array and not afterwards. Signed-off-by:
Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by:
Bin Liu <b-liu@ti.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Vlastimil Babka authored
commit a9f2a846 upstream. cache_reap() is initially scheduled in start_cpu_timer() via schedule_delayed_work_on(). But then the next iterations are scheduled via schedule_delayed_work(), i.e. using WORK_CPU_UNBOUND. Thus since commit ef557180 ("workqueue: schedule WORK_CPU_UNBOUND work on wq_unbound_cpumask CPUs") there is no guarantee the future iterations will run on the originally intended cpu, although it's still preferred. I was able to demonstrate this with /sys/module/workqueue/parameters/debug_force_rr_cpu. IIUC, it may also happen due to migrating timers in nohz context. As a result, some cpu's would be calling cache_reap() more frequently and others never. This patch uses schedule_delayed_work_on() with the current cpu when scheduling the next iteration. Link: http://lkml.kernel.org/r/20180411070007.32225-1-vbabka@suse.cz Fixes: ef557180 ("workqueue: schedule WORK_CPU_UNBOUND work on wq_unbound_cpumask CPUs") Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Acked-by:
Pekka Enberg <penberg@kernel.org> Acked-by:
Christoph Lameter <cl@linux.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: David Rientjes <rientjes@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Stephen Boyd <sboyd@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Eric Biggers authored
commit 3f05317d upstream. syzbot reported a use-after-free of shm_file_data(file)->file->f_op in shm_get_unmapped_area(), called via sys_remap_file_pages(). Unfortunately it couldn't generate a reproducer, but I found a bug which I think caused it. When remap_file_pages() is passed a full System V shared memory segment, the memory is first unmapped, then a new map is created using the ->vm_file. Between these steps, the shm ID can be removed and reused for a new shm segment. But, shm_mmap() only checks whether the ID is currently valid before calling the underlying file's ->mmap(); it doesn't check whether it was reused. Thus it can use the wrong underlying file, one that was already freed. Fix this by making the "outer" shm file (the one that gets put in ->vm_file) hold a reference to the real shm file, and by making __shm_open() require that the file associated with the shm ID matches the one associated with the "outer" file. Taking the reference to the real shm file is needed to fully solve the problem, since otherwise sfd->file could point to a freed file, which then could be reallocated for the reused shm ID, causing the wrong shm segment to be mapped (and without the required permission checks). Commit 1ac0b6de ("ipc/shm: handle removed segments gracefully in shm_mmap()") almost fixed this bug, but it didn't go far enough because it didn't consider the case where the shm ID is reused. The following program usually reproduces this bug: #include <stdlib.h> #include <sys/shm.h> #include <sys/syscall.h> #include <unistd.h> int main() { int is_parent = (fork() != 0); srand(getpid()); for (;;) { int id = shmget(0xF00F, 4096, IPC_CREAT|0700); if (is_parent) { void *addr = shmat(id, NULL, 0); usleep(rand() % 50); while (!syscall(__NR_remap_file_pages, addr, 4096, 0, 0, 0)); } else { usleep(rand() % 50); shmctl(id, IPC_RMID, NULL); } } } It causes the following NULL pointer dereference due to a 'struct file' being used while it's being freed. (I couldn't actually get a KASAN use-after-free splat like in the syzbot report. But I think it's possible with this bug; it would just take a more extraordinary race...) BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 9 PID: 258 Comm: syz_ipc Not tainted 4.16.0-05140-gf8cf2f16 #189 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 RIP: 0010:d_inode include/linux/dcache.h:519 [inline] RIP: 0010:touch_atime+0x25/0xd0 fs/inode.c:1724 [...] Call Trace: file_accessed include/linux/fs.h:2063 [inline] shmem_mmap+0x25/0x40 mm/shmem.c:2149 call_mmap include/linux/fs.h:1789 [inline] shm_mmap+0x34/0x80 ipc/shm.c:465 call_mmap include/linux/fs.h:1789 [inline] mmap_region+0x309/0x5b0 mm/mmap.c:1712 do_mmap+0x294/0x4a0 mm/mmap.c:1483 do_mmap_pgoff include/linux/mm.h:2235 [inline] SYSC_remap_file_pages mm/mmap.c:2853 [inline] SyS_remap_file_pages+0x232/0x310 mm/mmap.c:2769 do_syscall_64+0x64/0x1a0 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 [ebiggers@google.com: add comment] Link: http://lkml.kernel.org/r/20180410192850.235835-1-ebiggers3@gmail.com Link: http://lkml.kernel.org/r/20180409043039.28915-1-ebiggers3@gmail.com Reported-by: syzbot+d11f321e7f1923157eac80aa990b446596f46439@syzkaller.appspotmail.com Fixes: c8d78c18 ("mm: replace remap_file_pages() syscall with emulation") Signed-off-by:
Eric Biggers <ebiggers@google.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by:
Davidlohr Bueso <dbueso@suse.de> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: "Eric W . Biederman" <ebiederm@xmission.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit 60bb83b8 upstream. We've got a bug report indicating a kernel panic at booting on an x86-32 system, and it turned out to be the invalid PCI resource assigned after reallocation. __find_resource() first aligns the resource start address and resets the end address with start+size-1 accordingly, then checks whether it's contained. Here the end address may overflow the integer, although resource_contains() still returns true because the function validates only start and end address. So this ends up with returning an invalid resource (start > end). There was already an attempt to cover such a problem in the commit 47ea91b4 ("Resource: fix wrong resource window calculation"), but this case is an overseen one. This patch adds the validity check of the newly calculated resource for avoiding the integer overflow problem. Bugzilla: http://bugzilla.opensuse.org/show_bug.cgi?id=1086739 Link: http://lkml.kernel.org/r/s5hpo37d5l8.wl-tiwai@suse.de Fixes: 23c570a6 ("resource: ability to resize an allocated resource") Signed-off-by:
Michael Henders <hendersm@shaw.ca> Tested-by:
-
Andrew Morton authored
commit 9ad553ab upstream. One use of the reiserfs_warning() macro in journal_init_dev() is missing a parameter, causing the following warning: REISERFS warning (device loop0): journal_init_dev: Cannot open '%s': %i journal_init_dev: This also causes a WARN_ONCE() warning in the vsprintf code, and then a panic if panic_on_warn is set. Please remove unsupported %/ in format string WARNING: CPU: 1 PID: 4480 at lib/vsprintf.c:2138 format_decode+0x77f/0x830 lib/vsprintf.c:2138 Kernel panic - not syncing: panic_on_warn set ... Just add another string argument to the macro invocation. Addresses https://syzkaller.appspot.com/bug?id=0627d4551fdc39bf1ef5d82cd9eef587047f7718 Link: http://lkml.kernel.org/r/d678ebe1-6f54-8090-df4c-b9affad62293@infradead.orgSigned-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by: <syzbot+6bd77b88c1977c03f584@syzkaller.appspotmail.com> Tested-by:
Jeff Mahoney <jeffm@suse.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jan Kara <jack@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
