Skip to content

L
linux
Switch branch/tag
  1. 09 Nov, 2012 27 commits
  3. 08 Nov, 2012 13 commits
    • Dave Chinner's avatar
      xfs: fix reading of wrapped log data · 6ce377af
      Dave Chinner authored 
      Commit 44396476 ("xfs: reset buffer pointers before freeing them") in
3.0-rc1 introduced a regression when recovering log buffers that
wrapped around the end of log. The second part of the log buffer at
the start of the physical log was being read into the header buffer
rather than the data buffer, and hence recovery was seeing garbage
in the data buffer when it got to the region of the log buffer that
was incorrectly read.

Cc: <stable@vger.kernel.org> # 3.0.x, 3.2.x, 3.4.x 3.6.x
Reported-by: default avatarTorsten Kaiser <just.for.lkml@googlemail.com>
Signed-off-by: default avatarDave Chinner <dchinner@redhat.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Reviewed-by: default avatarMark Tinguely <tinguely@sgi.com>
Signed-off-by: default avatarBen Myers <bpm@sgi.com>
      6ce377af
    • Dave Chinner's avatar
      xfs: fix buffer shudown reference count mismatch · 03b1293e
      Dave Chinner authored 
      When we shut down the filesystem, we have to unpin and free all the
buffers currently active in the CIL. To do this we unpin and remove
them in one operation as a result of a failed iclogbuf write. For
buffers, we do this removal via a simultated IO completion of after
marking the buffer stale.

At the time we do this, we have two references to the buffer - the
active LRU reference and the buf log item.  The LRU reference is
removed by marking the buffer stale, and the active CIL reference is
by the xfs_buf_iodone() callback that is run by
xfs_buf_do_callbacks() during ioend processing (via the bp->b_iodone
callback).

However, ioend processing requires one more reference - that of the
IO that it is completing. We don't have this reference, so we free
the buffer prematurely and use it after it is freed. For buffers
marked with XBF_ASYNC, this leads to assert failures in
xfs_buf_rele() on debug kernels because the b_hold count is zero.

Fix this by making sure we take the necessary IO reference before
starting IO completion processing on the stale buffer, and set the
XBF_ASYNC flag to ensure that IO completion processing removes all
the active references from the buffer to ensure it is fully torn
down.

Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarDave Chinner <dchinner@redhat.com>
Reviewed-by: default avatarMark Tinguely <tinguely@sgi.com>
Signed-off-by: default avatarBen Myers <bpm@sgi.com>
      03b1293e
    • Dave Chinner's avatar
      xfs: don't vmap inode cluster buffers during free · 4b62acfe
      Dave Chinner authored 
      Inode buffers do not need to be mapped as inodes are read or written
directly from/to the pages underlying the buffer. This fixes a
regression introduced by commit 611c9946 ("xfs: make XBF_MAPPED the
default behaviour").
Signed-off-by: default avatarDave Chinner <dchinner@redhat.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Reviewed-by: default avatarMark Tinguely <tinguely@sgi.com>
Signed-off-by: default avatarBen Myers <bpm@sgi.com>
      4b62acfe
    • Dave Chinner's avatar
      xfs: invalidate allocbt blocks moved to the free list · ca250b1b
      Dave Chinner authored 
      When we free a block from the alloc btree tree, we move it to the
freelist held in the AGFL and mark it busy in the busy extent tree.
This typically happens when we merge btree blocks.

Once the transaction is committed and checkpointed, the block can
remain on the free list for an indefinite amount of time.  Now, this
isn't the end of the world at this point - if the free list is
shortened, the buffer is invalidated in the transaction that moves
it back to free space. If the buffer is allocated as metadata from
the free list, then all the modifications getted logged, and we have
no issues, either. And if it gets allocated as userdata direct from
the freelist, it gets invalidated and so will never get written.

However, during the time it sits on the free list, pressure on the
log can cause the AIL to be pushed and the buffer that covers the
block gets pushed for write. IOWs, we end up writing a freed
metadata block to disk. Again, this isn't the end of the world
because we know from the above we are only writing to free space.

The problem, however, is for validation callbacks. If the block was
on old btree root block, then the level of the block is going to be
higher than the current tree root, and so will fail validation.
There may be other inconsistencies in the block as well, and
currently we don't care because the block is in free space. Shutting
down the filesystem because a freed block doesn't pass write
validation, OTOH, is rather unfriendly.

So, make sure we always invalidate buffers as they move from the
free space trees to the free list so that we guarantee they never
get written to disk while on the free list.
Signed-off-by: default avatarDave Chinner <dchinner@redhat.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Reviewed-by: default avatarPhil White <pwhite@sgi.com>
Reviewed-by: default avatarMark Tinguely <tinguely@sgi.com>
Signed-off-by: default avatarBen Myers <bpm@sgi.com>
      ca250b1b
    • Dave Chinner's avatar
      xfs: silence uninitialised f.file warning. · 1e7acbb7
      Dave Chinner authored 
      Uninitialised variable build warning introduced by 2903ff01 ("switch
simple cases of fget_light to fdget"), gcc is not smart enough to
work out that the variable is not used uninitialised, and the commit
removed the initialisation at declaration that the old variable had.
Signed-off-by: default avatarDave Chinner <dchinner@redhat.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Reviewed-by: default avatarMark Tinguely <tinguely@sgi.com>
Signed-off-by: default avatarBen Myers <bpm@sgi.com>
      1e7acbb7
    • Dave Chinner's avatar
      xfs: growfs: don't read garbage for new secondary superblocks · eaef8543
      Dave Chinner authored 
      When updating new secondary superblocks in a growfs operation, the
superblock buffer is read from the newly grown region of the
underlying device. This is not guaranteed to be zero, so violates
the underlying assumption that the unused parts of superblocks are
zero filled. Get a new buffer for these secondary superblocks to
ensure that the unused regions are zero filled correctly.
Signed-off-by: default avatarDave Chinner <dchinner@redhat.com>
Reviewed-by: default avatarCarlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: default avatarBen Myers <bpm@sgi.com>
      eaef8543
    • Dave Chinner's avatar
      xfs: move allocation stack switch up to xfs_bmapi_allocate · 1f3c785c
      Dave Chinner authored 
      Switching stacks are xfs_alloc_vextent can cause deadlocks when we
run out of worker threads on the allocation workqueue. This can
occur because xfs_bmap_btalloc can make multiple calls to
xfs_alloc_vextent() and even if xfs_alloc_vextent() fails it can
return with the AGF locked in the current allocation transaction.

If we then need to make another allocation, and all the allocation
worker contexts are exhausted because the are blocked waiting for
the AGF lock, holder of the AGF cannot get it's xfs-alloc_vextent
work completed to release the AGF.  Hence allocation effectively
deadlocks.

To avoid this, move the stack switch one layer up to
xfs_bmapi_allocate() so that all of the allocation attempts in a
single switched stack transaction occur in a single worker context.
This avoids the problem of an allocation being blocked waiting for
a worker thread whilst holding the AGF.
Signed-off-by: default avatarDave Chinner <dchinner@redhat.com>
Reviewed-by: default avatarMark Tinguely <tinguely@sgi.com>
Signed-off-by: default avatarBen Myers <bpm@sgi.com>
      1f3c785c
    • Dave Chinner's avatar
      xfs: introduce XFS_BMAPI_STACK_SWITCH · 326c0355
      Dave Chinner authored 
      Certain allocation paths through xfs_bmapi_write() are in situations
where we have limited stack available. These are almost always in
the buffered IO writeback path when convertion delayed allocation
extents to real extents.

The current stack switch occurs for userdata allocations, which
means we also do stack switches for preallocation, direct IO and
unwritten extent conversion, even those these call chains have never
been implicated in a stack overrun.

Hence, let's target just the single stack overun offended for stack
switches. To do that, introduce a XFS_BMAPI_STACK_SWITCH flag that
the caller can pass xfs_bmapi_write() to indicate it should switch
stacks if it needs to do allocation.
Signed-off-by: default avatarDave Chinner <dchinner@redhat.com>
Reviewed-by: default avatarMark Tinguely <tinguely@sgi.com>
Signed-off-by: default avatarBen Myers <bpm@sgi.com>
      326c0355
    • Mark Tinguely's avatar
      xfs: zero allocation_args on the kernel stack · 408cc4e9
      Mark Tinguely authored 
      Zero the kernel stack space that makes up the xfs_alloc_arg structures.
Signed-off-by: default avatarMark Tinguely <tinguely@sgi.com>
Reviewed-by: default avatarBen Myers <bpm@sgi.com>
Signed-off-by: default avatarBen Myers <bpm@sgi.com>
      408cc4e9
    • Dave Chinner's avatar
      xfs: only update the last_sync_lsn when a transaction completes · 7e9620f2
      Dave Chinner authored 
      The log write code stamps each iclog with the current tail LSN in
the iclog header so that recovery knows where to find the tail of
thelog once it has found the head. Normally this is taken from the
first item on the AIL - the log item that corresponds to the oldest
active item in the log.

The problem is that when the AIL is empty, the tail lsn is dervied
from the the l_last_sync_lsn, which is the LSN of the last iclog to
be written to the log. In most cases this doesn't happen, because
the AIL is rarely empty on an active filesystem. However, when it
does, it opens up an interesting case when the transaction being
committed to the iclog spans multiple iclogs.

That is, the first iclog is stamped with the l_last_sync_lsn, and IO
is issued. Then the next iclog is setup, the changes copied into the
iclog (takes some time), and then the l_last_sync_lsn is stamped
into the header and IO is issued. This is still the same
transaction, so the tail lsn of both iclogs must be the same for log
recovery to find the entire transaction to be able to replay it.

The problem arises in that the iclog buffer IO completion updates
the l_last_sync_lsn with it's own LSN. Therefore, If the first iclog
completes it's IO before the second iclog is filled and has the tail
lsn stamped in it, it will stamp the LSN of the first iclog into
it's tail lsn field. If the system fails at this point, log recovery
will not see a complete transaction, so the transaction will no be
replayed.

The fix is simple - the l_last_sync_lsn is updated when a iclog
buffer IO completes, and this is incorrect. The l_last_sync_lsn
shoul dbe updated when a transaction is completed by a iclog buffer
IO. That is, only iclog buffers that have transaction commit
callbacks attached to them should update the l_last_sync_lsn. This
means that the last_sync_lsn will only move forward when a commit
record it written, not in the middle of a large transaction that is
rolling through multiple iclog buffers.
Signed-off-by: default avatarDave Chinner <dchinner@redhat.com>
Reviewed-by: default avatarMark Tinguely <tinguely@sgi.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Signed-off-by: default avatarBen Myers <bpm@sgi.com>
      7e9620f2
    • Alex Deucher's avatar
      drm/radeon/si: add some missing regs to the VM reg checker · f418b88a
      Alex Deucher authored 
      This register is needed for streamout to work properly.
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: default avatarMichel Dänzer <michel.daenzer@amd.com>
      f418b88a
    • Alex Deucher's avatar
      drm/radeon/cayman: add some missing regs to the VM reg checker · 860fe2f0
      Alex Deucher authored 
      These regs were being wronly rejected leading to rendering
issues.

fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=56876Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: default avatarMichel Dänzer <michel.daenzer@amd.com>
      860fe2f0
    • Takashi Iwai's avatar
      ALSA: Fix card refcount unbalance · 8bb4d9ce
      Takashi Iwai authored 
      There are uncovered cases whether the card refcount introduced by the
commit a0830dbd isn't properly increased or decreased:
- OSS PCM and mixer success paths
- When lookup function gets NULL

This patch fixes these places.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=50251

Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      8bb4d9ce
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7