- 13 Mar, 2020 40 commits
-
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 13649101 ] Currently, the expression for calculating RON is always going to result in zero no matter the value of ram->mr[1] because the ! operator has higher precedence than the shift >> operator. I believe the missing parentheses around the expression before appying the ! operator will result in the desired result. [ Note, not tested ] Detected by CoveritScan, CID#1324005 ("Operands don't affect result") Fixes: c25bf7b6 ("drm/nouveau/bios/ramcfg: Separate out RON pull value") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
YueHaibing authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 0742a338 ] 'rv' is the correct return value, pass it upstream instead of 0 Fixes: 17d80d56 ("USB: autosuspend for cdc-wdm") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Eric Auger authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 0cfd027b ] pci_map_rom/pci_get_rom_size() performs memory access in the ROM. In case the Memory Space accesses were disabled, readw() is likely to trigger a synchronous external abort on some platforms. In case memory accesses were disabled, re-enable them before the call and disable them back again just after. Fixes: 89e1f7d4 ("vfio: Add PCI device driver") Signed-off-by:
Eric Auger <eric.auger@redhat.com> Suggested-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
Ming Lei authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 1a67356e ] It is wrong to use bio->bi_vcnt to figure out how many segments there are in the bio even though CLONED flag isn't set on this bio, because this bio may be splitted or advanced. So always use bio_segments() in blk_recount_segments(), and it shouldn't cause any performance loss now because the physical segment number is figured out in blk_queue_split() and BIO_SEG_VALID is set meantime since bdced438 ("block: setup bi_phys_segments after splitting"). Reviewed-by:
Omar Sandoval <osandov@fb.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Fixes: 76d8137a ("blk-merge: recaculate segment if it isn't less than max segments") Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Geert Uytterhoeven authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 0e6e448b ] There are two pin groups for the FSIC SPDIF signal, but the FSIC pin group array lists only one, and it refers to a nonexistent group. Fixes: 2ecd4154 ("sh-pfc: sh73a0: Add FSI pin groups and functions") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Geert Uytterhoeven authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit a4b03500 ] The entry for "scifb2_data_c" in the SCIFB2 pin group array contains a typo, thus the group cannot be selected. Fixes: 50884519 ("pinctrl: sh-pfc: r8a7791 PFC support") Signed-off-by:
-
Geert Uytterhoeven authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 1ecd8c9c ] The err_rst_reqb, ext_clki, lowpwr, and ref_clko pin groups are present, but no pinmux functions refer to them, hence they can not be selected. Fixes: 1e7d5d84 ("sh-pfc: Add emev2 pinmux support") Signed-off-by:
-
YueHaibing authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 8e71fa5e ] Fixes gcc '-Wunused-but-set-variable' warning: drivers/video/fbdev/chipsfb.c: In function 'chipsfb_pci_init': drivers/video/fbdev/chipsfb.c:352:22: warning: variable 'size' set but not used [-Wunused-but-set-variable] Fixes: 8c870933 ("[PATCH] ppc32: Remove CONFIG_PMAC_PBOOK"). Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Christophe Leroy <christophe.leroy@c-s.fr> [b.zolnierkie: minor commit summary and description fixups] Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit e4228088 ] Shifting a u8 by 24 will cause the value to be promoted to an integer. If the top bit of the u8 is set then the following conversion to an unsigned long will sign extend the value causing the upper 32 bits to be set in the result. Fix this by casting the u8 value to an unsigned long before the shift. Detected by CoverityScan, CID#1309693 ("Unintended sign extension") Fixes: 9a9a54ad ("drivers/rtc: add support for Qualcomm PMIC8xxx RTC") Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit fb0b3225 ] Shifting a u8 by 24 will cause the value to be promoted to an integer. If the top bit of the u8 is set then the following conversion to an unsigned long will sign extend the value causing the upper 32 bits to be set in the result. Fix this by casting the u8 value to an unsigned long before the shift. Detected by CoverityScan, CID#714646-714649 ("Unintended sign extension") Fixes: 2985c29c ("rtc: Add rtc support to 88PM80X PMIC") Signed-off-by:
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit dc9e4716 ] Shifting a u8 by 24 will cause the value to be promoted to an integer. If the top bit of the u8 is set then the following conversion to an unsigned long will sign extend the value causing the upper 32 bits to be set in the result. Fix this by casting the u8 value to an unsigned long before the shift. Detected by CoverityScan, CID#144925-144928 ("Unintended sign extension") Fixes: 008b3040 ("mfd: Add rtc support to 88pm860x") Signed-off-by:
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit f0c04c27 ] Shifting a u8 by 24 will cause the value to be promoted to an integer. If the top bit of the u8 is set then the following conversion to an unsigned long will sign extend the value causing the upper 32 bits to be set in the result. Fix this by casting the u8 value to an unsigned long before the shift. Detected by CoverityScan, CID#138801 ("Unintended sign extension") Fixes: edf1aaa3 ("[PATCH] RTC subsystem: DS1672 driver") Signed-off-by:
-
YueHaibing authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 7dd50e20 ] There is a potential NULL pointer dereference in case alloc_ctrl_packet() fails and returns NULL. Fixes: 099dc4fb ("ipwireless: driver for PC Card 3G/UMTS modem") Signed-off-by:
-
Eric Wong authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 2a4daadd ] Older versions of Libreboot and Coreboot had an invalid value (`3' in my case) in the century byte affecting the GM45 in the Thinkpad X200. Not everybody's updated their firmwares, and Linux <= 4.2 was able to read the RTC without problems, so workaround this by ignoring invalid values. Fixes: 3c217e51 ("rtc: cmos: century support") Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sylvain Chouleur <sylvain.chouleur@intel.com> Cc: Patrick McDermott <patrick.mcdermott@libiquity.com> Cc: linux-rtc@vger.kernel.org Signed-off-by:
Eric Wong <e@80x24.org> Signed-off-by:
-
Stefan Agner authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit d9866572 ] Make sure to properly put the of node in case finding the codec fails. Fixes: 81e8e492 ("ASoC: fsl: add sgtl5000 clock support for imx-sgtl5000") Signed-off-by:
Stefan Agner <stefan@agner.ch> Reviewed-by:
Daniel Baluta <daniel.baluta@nxp.com> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit f990f7fb ] Fix an unaligned memory access in tgr192_transform() by using the unaligned access helpers. Fixes: 06ace7a9 ("[CRYPTO] Use standard byte order macros wherever possible") Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Pawe? Chmiel authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 19c624c6 ] This commit corrects max and step values for v4l2 control for V4L2_CID_JPEG_RESTART_INTERVAL. Max should be 0xffff and step should be 1. It was found by using v4l2-compliance tool and checking result of VIDIOC_QUERY_EXT_CTRL/QUERYMENU test. Previously it was complaining that step was bigger than difference between max and min. Fixes: 15f4bc3b ("[media] s5p-jpeg: Add JPEG controls support") Signed-off-by:
Pawe? Chmiel <pawel.mikolaj.chmiel@gmail.com> Reviewed-by:
Jacek Anaszewski <jacek.anaszewski@gmail.com> Reviewed-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Gal Pressman authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit b1889407 ] The pkey table size is one element, index should be tested for > 0 instead of > 1. Fixes: fe2caefc ("RDMA/ocrdma: Add driver for Emulex OneConnect IBoE RDMA adapter") Signed-off-by:
Gal Pressman <galpress@amazon.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Gal Pressman authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 4959d5da ] The pkey table size is one element, index should be tested for > 0 instead of > 1. Fixes: e3cf00d0 ("IB/usnic: Add Cisco VIC low-level hardware driver") Signed-off-by:
Parvi Kaustubhi <pkaustub@cisco.com> Signed-off-by:
-
Yangtao Li authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit db20a90a ] The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount. Signed-off-by:
Yangtao Li <tiny.windzz@gmail.com> Reviewed-by:
Gregory CLEMENT <gregory.clement@bootlin.com> Fixes: 0a11a6ae ("clk: mvebu: armada-xp: maintain clock init order") Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Yangtao Li authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit e7beeab9 ] The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount. Signed-off-by:
-
Yangtao Li authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit a3c24050 ] The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount. Signed-off-by:
-
Yangtao Li authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 56717702 ] The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount. Signed-off-by:
-
Yangtao Li authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 5f8c183a ] The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount. Signed-off-by:
-
Yangtao Li authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 1731e14f ] The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount. Signed-off-by:
-
Yangtao Li authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit c9ec1d8f ] The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount. Signed-off-by:
-
Yangtao Li authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit cee82eb9 ] The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount. Signed-off-by:
-
Yangtao Li authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 7f9705be ] The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount. Signed-off-by:
-
Yangtao Li authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 70af6c5b ] The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount. Signed-off-by:
-
Yangtao Li authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 5eb8ba90 ] The of_find_compatible_node() returns a node pointer with refcount incremented, but there is the lack of use of the of_node_put() when done. Add the missing of_node_put() to release the refcount. Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 4d8f727b ] The loop exits with "timeout" set to -1 not to 0. Fixes: 1158f0f1 ("Input: add support for Nomadik SKE keypad controller") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Geert Uytterhoeven authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 4d374bac ] The IP10[5:3] field in Peripheral Function Select Register 10 has a width of 3 bits, i.e. it allows programming one out of 8 different configurations. However, 9 values are provided instead of 8, overflowing into the subsequent field in the register, and thus breaking the configuration of the latter. Fix this by dropping a bogus zero value. Fixes: ac1ebc21 ("sh-pfc: Add sh7734 pinmux support") Signed-off-by:
-
Geert Uytterhoeven authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 9540cbdf ] The Port C I/O Register 0 contains 7 reserved bits, but the descriptor contains only dummy configuration values for 6 reserved bits, thus breaking the configuration of all subsequent fields in the register. Fix this by adding the two missing configuration values. Fixes: f5e811f2 ("sh-pfc: Add sh7269 pinmux support") Signed-off-by:
-
Geert Uytterhoeven authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 94482af7 ] The Peripheral Function Select Register 11 contains 3 reserved bits and 15 variable-width fields, but the variable field descriptor does not contain the 3-bit field IP11[25:23]. Fixes: 856cb4bb ("sh: Add support pinmux for SH7734") Signed-off-by:
-
Geert Uytterhoeven authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 6a6c195d ] The Peripheral Function Select Register 9 contains 12 fields, but the variable field descriptor contains a 13th bogus field of 3 bits. Fixes: 43c4436e ("pinctrl: sh-pfc: add R8A7794 PFC support") Signed-off-by:
-
Geert Uytterhoeven authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 124cde98 ] The tpu4_to3_mux[] array contains the TPU4TO3 pin mark, but the tpu4_to3_pins[] array lacks the corresponding pin number. Add the missing pin number, for non-GPIO pin F26. Fixes: 5da4eb04 ("sh-pfc: sh73a0: Add TPU pin groups and functions") Signed-off-by:
-
Geert Uytterhoeven authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 0d6256cb ] The vin1_b_data18_mux[] arrays contains pin marks for the 2 LSB bits of the color components. The vin1_b_data18_pins[] array rightfully does not include the corresponding pin numbers, as RGB18 is subset of RGB24, containing only the 6 MSB bits of each component. Fixes: 8e32c967 ("pinctrl: sh-pfc: r8a7791: Add VIN pins") Signed-off-by:
-
Geert Uytterhoeven authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 884fa25f ] The qspi_data4_b_mux[] array contains pin marks for the clock and chip select pins. The qspi_data4_b_pins[] array rightfully does not contain the corresponding pin numbers, as the control pins are provided by a separate group (qspi_ctrl_b). Fixes: 2d0c386f ("pinctrl: sh-pfc: r8a7791: Add QSPI pin groups") Signed-off-by:
-
Geert Uytterhoeven authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 96bb2a6a ] The lcd0_data24_1_pins[] array contains the LCD0 D1[2-5] pin numbers, but the lcd0_data24_1_mux[] array lacks the corresponding pin marks. Fixes: 06c7dd86 ("sh-pfc: r8a7740: Add LCDC0 and LCDC1 pin groups and functions") Signed-off-by:
-
Geert Uytterhoeven authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 1ebc589a ] The gether_gmii_mux[] array contains the REF125CK pin mark, but the gether_gmii_pins[] array lacks the corresponding pin number. Fixes: bae11d30 ("sh-pfc: r8a7740: Add GETHER pin groups and functions") Signed-off-by:
-
