- 20 Dec, 2017 17 commits
-
-
Javier Martinez Canillas authored
[ Upstream commit fd567653 ] The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
-
Ilan peer authored
commit 57629915 upstream. The code was setting the capabilities byte to zero, after it was already properly set previously. Fix it. The bug was found while debugging hwsim mesh tests failures that happened since the commit mentioned below. Fixes: 76f43b4c ("mac80211: Remove invalid flag operations in mesh TSF synchronization") Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Reviewed-by:
Masashi Honma <masashi.honma@gmail.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Cc: Richard Schütz <rschuetz@uni-koblenz.de> Cc: Mathias Kretschmer <mathias.kretschmer@fit.fraunhofer.de> Signed-off-by:
-
Eric Biggers authored
commit 4dca6ea1 upstream. When the request_key() syscall is not passed a destination keyring, it links the requested key (if constructed) into the "default" request-key keyring. This should require Write permission to the keyring. However, there is actually no permission check. This can be abused to add keys to any keyring to which only Search permission is granted. This is because Search permission allows joining the keyring. keyctl_set_reqkey_keyring(KEY_REQKEY_DEFL_SESSION_KEYRING) then will set the default request-key keyring to the session keyring. Then, request_key() can be used to add keys to the keyring. Both negatively and positively instantiated keys can be added using this method. Adding negative keys is trivial. Adding a positive key is a bit trickier. It requires that either /sbin/request-key positively instantiates the key, or that another thread adds the key to the process keyring at just the right time, such that request_key() misses it initially but then finds it in construct_alloc_key(). Fix this bug by checking for Write permission to the keyring in construct_get_dest_keyring() when the default keyring is being used. We don't do the permission check for non-default keyrings because that was already done by the earlier call to lookup_user_key(). Also, request_key_and_link() is currently passed a 'struct key *' rather than a key_ref_t, so the "possessed" bit is unavailable. We also don't do the permission check for the "requestor keyring", to continue to support the use case described by commit 8bbf4976 ("KEYS: Alter use of key instantiation link-to-keyring argument") where /sbin/request-key recursively calls request_key() to add keys to the original requestor's destination keyring. (I don't know of any users who actually do that, though...) Fixes: 3e30148c ("[PATCH] Keys: Make request-key create an authorisation key") Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Chandan Rajendra authored
commit 9d5afec6 upstream. On a ppc64 machine, when mounting a fuzzed ext2 image (generated by fsfuzzer) the following call trace is seen, VFS: brelse: Trying to free free buffer WARNING: CPU: 1 PID: 6913 at /root/repos/linux/fs/buffer.c:1165 .__brelse.part.6+0x24/0x40 .__brelse.part.6+0x20/0x40 (unreliable) .ext4_find_entry+0x384/0x4f0 .ext4_lookup+0x84/0x250 .lookup_slow+0xdc/0x230 .walk_component+0x268/0x400 .path_lookupat+0xec/0x2d0 .filename_lookup+0x9c/0x1d0 .vfs_statx+0x98/0x140 .SyS_newfstatat+0x48/0x80 system_call+0x58/0x6c This happens because the directory that ext4_find_entry() looks up has inode->i_size that is less than the block size of the filesystem. This causes 'nblocks' to have a value of zero. ext4_bread_batch() ends up not reading any of the directory file's blocks. This renders the entries in bh_use[] array to continue to have garbage data. buffer_uptodate() on bh_use[0] can then return a zero value upon which brelse() function is invoked. This commit fixes the bug by returning -ENOENT when the directory file has no associated blocks. Reported-by:
Abdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by:
Chandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by:
-
Eryu Guan authored
commit c894aa97 upstream. Currently, fallocate(2) with KEEP_SIZE followed by a fdatasync(2) then crash, we'll see wrong allocated block number (stat -c %b), the blocks allocated beyond EOF are all lost. fstests generic/468 exposes this bug. Commit 67a7d5f5 ("ext4: fix fdatasync(2) after extent manipulation operations") fixed all the other extent manipulation operation paths such as hole punch, zero range, collapse range etc., but forgot the fallocate case. So similarly, fix it by recording the correct journal tid in ext4 inode in fallocate(2) path, so that ext4_sync_file() will wait for the right tid to be committed on fdatasync(2). This addresses the test failure in xfstests test generic/468. Signed-off-by:
Eryu Guan <eguan@redhat.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Adam Wallis authored
commit 6f6a23a2 upstream. Commit adfa543e ("dmatest: don't use set_freezable_with_signal()") introduced a bug (that is in fact documented by the patch commit text) that leaves behind a dangling pointer. Since the done_wait structure is allocated on the stack, future invocations to the DMATEST can produce undesirable results (e.g., corrupted spinlocks). Commit a9df21e3 ("dmaengine: dmatest: warn user when dma test times out") attempted to WARN the user that the stack was likely corrupted but did not fix the actual issue. This patch fixes the issue by pushing the wait queue and callback structs into the the thread structure. If a failure occurs due to time, dmaengine_terminate_all will force the callback to safely call wake_up_all() without possibility of using a freed pointer. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=197605 Fixes: adfa543e ("dmatest: don't use set_freezable_with_signal()") Reviewed-by:
Sinan Kaya <okaya@codeaurora.org> Suggested-by:
Shunyong Yang <shunyong.yang@hxt-semitech.com> Signed-off-by:
Adam Wallis <awallis@codeaurora.org> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Steven Rostedt authored
commit f73c52a5 upstream. Daniel Wagner reported a crash on the BeagleBone Black SoC. This is a single CPU architecture, and does not have a functional arch_send_call_function_single_ipi() implementation which can crash the kernel if that is called. As it only has one CPU, it shouldn't be called, but if the kernel is compiled for SMP, the push/pull RT scheduling logic now calls it for irq_work if the one CPU is overloaded, it can use that function to call itself and crash the kernel. Ideally, we should disable the SCHED_FEAT(RT_PUSH_IPI) if the system only has a single CPU. But SCHED_FEAT is a constant if sched debugging is turned off. Another fix can also be used, and this should also help with normal SMP machines. That is, do not initiate the pull code if there's only one RT overloaded CPU, and that CPU happens to be the current CPU that is scheduling in a lower priority task. Even on a system with many CPUs, if there's many RT tasks waiting to run on a single CPU, and that CPU schedules in another RT task of lower priority, it will initiate the PULL logic in case there's a higher priority RT task on another CPU that is waiting to run. But if there is no other CPU with waiting RT tasks, it will initiate the RT pull logic on itself (as it still has RT tasks waiting to run). This is a wasted effort. Not only does this help with SMP code where the current CPU is the only one with RT overloaded tasks, it should also solve the issue that Daniel encountered, because it will prevent the PULL logic from executing, as there's only one CPU on the system, and the check added here will cause it to exit the RT pull code. Reported-by:
Daniel Wagner <wagi@monom.org> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by:
Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-rt-users <linux-rt-users@vger.kernel.org> Fixes: 4bdced5c ("sched/rt: Simplify the IPI based RT balancing logic") Link: http://lkml.kernel.org/r/20171202130454.4cbbfe8d@vmware.local.homeSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Mathias Nyman authored
commit 5d9b70f7 upstream. Avoid null pointer dereference if some function is walking through the devs array accessing members of a new virt_dev that is mid allocation. Add the virt_dev to xhci->devs[i] _after_ the virt_device and all its members are properly allocated. issue found by KASAN: null-ptr-deref in xhci_find_slot_id_by_port "Quick analysis suggests that xhci_alloc_virt_device() is not mutex protected. If so, there is a time frame where xhci->devs[slot_id] is set but not fully initialized. Specifically, xhci->devs[i]->udev can be NULL." Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Sukumar Ghorai authored
commit a0085f25 upstream. BT-Controller connected as platform non-root-hub device and usb-driver initialize such device with wakeup disabled, Ref. usb_new_device(). At present wakeup-capability get enabled by hid-input device from usb function driver(e.g. BT HID device) at runtime. Again some functional driver does not set usb-wakeup capability(e.g LE HID device implement as HID-over-GATT), and can't wakeup the host on USB. Most of the device operation (such as mass storage) initiated from host (except HID) and USB wakeup aligned with host resume procedure. For BT device, usb-wakeup capability need to enable form btusc driver as a generic solution for multiple profile use case and required for USB remote wakeup (in-bus wakeup) while host is suspended. Also usb-wakeup feature need to enable/disable with HCI interface up and down. Signed-off-by:
Sukumar Ghorai <sukumar.ghorai@intel.com> Signed-off-by:
Amit K Bag <amit.k.bag@intel.com> Acked-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Cc: Matthias Kaehlcke <mka@chromium.org> Signed-off-by:
-
Yan, Zheng authored
commit 040d7860 upstream. Negative child dentry holds reference on inode's alias, it makes d_prune_aliases() do nothing. Signed-off-by:
"Yan, Zheng" <zyan@redhat.com> Reviewed-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Shuah Khan authored
commit be6123df upstream. stub_send_ret_submit() handles urb with a potential null transfer_buffer, when it replays a packet with potential malicious data that could contain a null buffer. Add a check for the condition when actual_length > 0 and transfer_buffer is null. Reported-by:
Secunia Research <vuln@secunia.com> Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Alan Stern authored
commit 48a4ff1c upstream. A malicious USB device with crafted descriptors can cause the kernel to access unallocated memory by setting the bNumInterfaces value too high in a configuration descriptor. Although the value is adjusted during parsing, this adjustment is skipped in one of the error return paths. This patch prevents the problem by setting bNumInterfaces to 0 initially. The existing code already sets it to the proper value after parsing is complete. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
-
David Kozub authored
commit 62354454 upstream. There is another JMS567-based USB3 UAS enclosure (152d:0578) that fails with the following error: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [sda] tag#0 Sense Key : Illegal Request [current] [sda] tag#0 Add. Sense: Invalid field in cdb The issue occurs both with UAS (occasionally) and mass storage (immediately after mounting a FS on a disk in the enclosure). Enabling US_FL_BROKEN_FUA quirk solves this issue. This patch adds an UNUSUAL_DEV with US_FL_BROKEN_FUA for the enclosure for both UAS and mass storage. Signed-off-by:
David Kozub <zub@linux.fjfi.cvut.cz> Acked-by:
-
Changbin Du authored
commit 90e406f9 upstream. The default NR_CPUS can be very large, but actual possible nr_cpu_ids usually is very small. For my x86 distribution, the NR_CPUS is 8192 and nr_cpu_ids is 4. About 2 pages are wasted. Most machines don't have so many CPUs, so define a array with NR_CPUS just wastes memory. So let's allocate the buffer dynamically when need. With this change, the mutext tracing_cpumask_update_lock also can be removed now, which was used to protect mask_str. Link: http://lkml.kernel.org/r/1512013183-19107-1-git-send-email-changbin.du@intel.com Fixes: 36dfe925 ("ftrace: make use of tracing_cpumask") Signed-off-by:
Changbin Du <changbin.du@intel.com> Signed-off-by:
-
NeilBrown authored
commit 302ec300 upstream. Commit ecc0c469 ("autofs: don't fail mount for transient error") was meant to replace an 'if' with a 'switch', but instead added the 'switch' leaving the case in place. Link: http://lkml.kernel.org/r/87zi6wstmw.fsf@notabene.neil.brown.name Fixes: ecc0c469 ("autofs: don't fail mount for transient error") Reported-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
NeilBrown <neilb@suse.com> Cc: Ian Kent <raven@themaw.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Eric Biggers authored
commit ecaaab56 upstream. When asked to encrypt or decrypt 0 bytes, both the generic and x86 implementations of Salsa20 crash in blkcipher_walk_done(), either when doing 'kfree(walk->buffer)' or 'free_page((unsigned long)walk->page)', because walk->buffer and walk->page have not been initialized. The bug is that Salsa20 is calling blkcipher_walk_done() even when nothing is in 'walk.nbytes'. But blkcipher_walk_done() is only meant to be called when a nonzero number of bytes have been provided. The broken code is part of an optimization that tries to make only one call to salsa20_encrypt_bytes() to process inputs that are not evenly divisible by 64 bytes. To fix the bug, just remove this "optimization" and use the blkcipher_walk API the same way all the other users do. Reproducer: #include <linux/if_alg.h> #include <sys/socket.h> #include <unistd.h> int main() { int algfd, reqfd; struct sockaddr_alg addr = { .salg_type = "skcipher", .salg_name = "salsa20", }; char key[16] = { 0 }; algfd = socket(AF_ALG, SOCK_SEQPACKET, 0); bind(algfd, (void *)&addr, sizeof(addr)); reqfd = accept(algfd, 0, 0); setsockopt(algfd, SOL_ALG, ALG_SET_KEY, key, sizeof(key)); read(reqfd, key, sizeof(key)); } Reported-by:
syzbot <syzkaller@googlegroups.com> Fixes: eb6f13eb ("[CRYPTO] salsa20_generic: Fix multi-page processing") Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Eric Biggers authored
commit af3ff804 upstream. Because the HMAC template didn't check that its underlying hash algorithm is unkeyed, trying to use "hmac(hmac(sha3-512-generic))" through AF_ALG or through KEYCTL_DH_COMPUTE resulted in the inner HMAC being used without having been keyed, resulting in sha3_update() being called without sha3_init(), causing a stack buffer overflow. This is a very old bug, but it seems to have only started causing real problems when SHA-3 support was added (requires CONFIG_CRYPTO_SHA3) because the innermost hash's state is ->import()ed from a zeroed buffer, and it just so happens that other hash algorithms are fine with that, but SHA-3 is not. However, there could be arch or hardware-dependent hash algorithms also affected; I couldn't test everything. Fix the bug by introducing a function crypto_shash_alg_has_setkey() which tests whether a shash algorithm is keyed. Then update the HMAC template to require that its underlying hash algorithm is unkeyed. Here is a reproducer: #include <linux/if_alg.h> #include <sys/socket.h> int main() { int algfd; struct sockaddr_alg addr = { .salg_type = "hash", .salg_name = "hmac(hmac(sha3-512-generic))", }; char key[4096] = { 0 }; algfd = socket(AF_ALG, SOCK_SEQPACKET, 0); bind(algfd, (const struct sockaddr *)&addr, sizeof(addr)); setsockopt(algfd, SOL_ALG, ALG_SET_KEY, key, sizeof(key)); } Here was the KASAN report from syzbot: BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:341 [inline] BUG: KASAN: stack-out-of-bounds in sha3_update+0xdf/0x2e0 crypto/sha3_generic.c:161 Write of size 4096 at addr ffff8801cca07c40 by task syzkaller076574/3044 CPU: 1 PID: 3044 Comm: syzkaller076574 Not tainted 4.14.0-mm1+ #25 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 print_address_description+0x73/0x250 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x25b/0x340 mm/kasan/report.c:409 check_memory_region_inline mm/kasan/kasan.c:260 [inline] check_memory_region+0x137/0x190 mm/kasan/kasan.c:267 memcpy+0x37/0x50 mm/kasan/kasan.c:303 memcpy include/linux/string.h:341 [inline] sha3_update+0xdf/0x2e0 crypto/sha3_generic.c:161 crypto_shash_update+0xcb/0x220 crypto/shash.c:109 shash_finup_unaligned+0x2a/0x60 crypto/shash.c:151 crypto_shash_finup+0xc4/0x120 crypto/shash.c:165 hmac_finup+0x182/0x330 crypto/hmac.c:152 crypto_shash_finup+0xc4/0x120 crypto/shash.c:165 shash_digest_unaligned+0x9e/0xd0 crypto/shash.c:172 crypto_shash_digest+0xc4/0x120 crypto/shash.c:186 hmac_setkey+0x36a/0x690 crypto/hmac.c:66 crypto_shash_setkey+0xad/0x190 crypto/shash.c:64 shash_async_setkey+0x47/0x60 crypto/shash.c:207 crypto_ahash_setkey+0xaf/0x180 crypto/ahash.c:200 hash_setkey+0x40/0x90 crypto/algif_hash.c:446 alg_setkey crypto/af_alg.c:221 [inline] alg_setsockopt+0x2a1/0x350 crypto/af_alg.c:254 SYSC_setsockopt net/socket.c:1851 [inline] SyS_setsockopt+0x189/0x360 net/socket.c:1830 entry_SYSCALL_64_fastpath+0x1f/0x96 Reported-by:
-
- 16 Dec, 2017 23 commits
-
-
Greg Kroah-Hartman authored
-
Vincent Pelletier authored
commit 30bf90cc upstream. Found using DEBUG_ATOMIC_SLEEP while submitting an AIO read operation: [ 100.853642] BUG: sleeping function called from invalid context at mm/slab.h:421 [ 100.861148] in_atomic(): 1, irqs_disabled(): 1, pid: 1880, name: python [ 100.867954] 2 locks held by python/1880: [ 100.867961] #0: (&epfile->mutex){....}, at: [<f8188627>] ffs_mutex_lock+0x27/0x30 [usb_f_fs] [ 100.868020] #1: (&(&ffs->eps_lock)->rlock){....}, at: [<f818ad4b>] ffs_epfile_io.isra.17+0x24b/0x590 [usb_f_fs] [ 100.868076] CPU: 1 PID: 1880 Comm: python Not tainted 4.14.0-edison+ #118 [ 100.868085] Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48 [ 100.868093] Call Trace: [ 100.868122] dump_stack+0x47/0x62 [ 100.868156] ___might_sleep+0xfd/0x110 [ 100.868182] __might_sleep+0x68/0x70 [ 100.868217] kmem_cache_alloc_trace+0x4b/0x200 [ 100.868248] ? dwc3_gadget_ep_alloc_request+0x24/0xe0 [dwc3] [ 100.868302] dwc3_gadget_ep_alloc_request+0x24/0xe0 [dwc3] [ 100.868343] usb_ep_alloc_request+0x16/0xc0 [udc_core] [ 100.868386] ffs_epfile_io.isra.17+0x444/0x590 [usb_f_fs] [ 100.868424] ? _raw_spin_unlock_irqrestore+0x27/0x40 [ 100.868457] ? kiocb_set_cancel_fn+0x57/0x60 [ 100.868477] ? ffs_ep0_poll+0xc0/0xc0 [usb_f_fs] [ 100.868512] ffs_epfile_read_iter+0xfe/0x157 [usb_f_fs] [ 100.868551] ? security_file_permission+0x9c/0xd0 [ 100.868587] ? rw_verify_area+0xac/0x120 [ 100.868633] aio_read+0x9d/0x100 [ 100.868692] ? __fget+0xa2/0xd0 [ 100.868727] ? __might_sleep+0x68/0x70 [ 100.868763] SyS_io_submit+0x471/0x680 [ 100.868878] do_int80_syscall_32+0x4e/0xd0 [ 100.868921] entry_INT80_32+0x2a/0x2a [ 100.868932] EIP: 0xb7fbb676 [ 100.868941] EFLAGS: 00000292 CPU: 1 [ 100.868951] EAX: ffffffda EBX: b7aa2000 ECX: 00000002 EDX: b7af8368 [ 100.868961] ESI: b7fbb660 EDI: b7aab000 EBP: bfb6c658 ESP: bfb6c638 [ 100.868973] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b Signed-off-by:
Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
Siqi Lin <siqilin@google.com> Signed-off-by:
-
Marc Zyngier authored
commit 5553b142 upstream. VTTBR_BADDR_MASK is used to sanity check the size and alignment of the VTTBR address. It seems to currently be off by one, thereby only allowing up to 39-bit addresses (instead of 40-bit) and also insufficiently checking the alignment. This patch fixes it. This patch is the 32bit pendent of Kristina's arm64 fix, and she deserves the actual kudos for pinpointing that one. Fixes: f7ed45be ("KVM: ARM: World-switch implementation") Cc: <stable@vger.kernel.org> # 3.9 Reported-by:
Kristina Martsenko <kristina.martsenko@arm.com> Reviewed-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 87e2bd89 which is commit edc3b912 upstream. Turns there was too many other issues with this patch to make it viable for the stable tree. Reported-by:
-
Greg Kroah-Hartman authored
This reverts commit b73adb60 which is commit c9f2a9a6 upstream. Turns there was too many other issues with this patch to make it viable for the stable tree. Reported-by:
-
Greg Kroah-Hartman authored
This reverts commit 36e0f05a which is commit 67a9108e upstream. Turns there was too many other issues with this patch to make it viable for the stable tree. Reported-by:
-
Eric Dumazet authored
[ Upstream commit 15fe076e ] syzbot reported crashes [1] and provided a C repro easing bug hunting. When/if packet_do_bind() calls __unregister_prot_hook() and releases po->bind_lock, another thread can run packet_notifier() and process an NETDEV_UP event. This calls register_prot_hook() and hooks again the socket right before first thread is able to grab again po->bind_lock. Fixes this issue by temporarily setting po->num to 0, as suggested by David Miller. [1] dev_remove_pack: ffff8801bf16fa80 not found ------------[ cut here ]------------ kernel BUG at net/core/dev.c:7945! ( BUG_ON(!list_empty(&dev->ptype_all)); ) invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: device syz0 entered promiscuous mode CPU: 0 PID: 3161 Comm: syzkaller404108 Not tainted 4.14.0+ #190 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff8801cc57a500 task.stack: ffff8801cc588000 RIP: 0010:netdev_run_todo+0x772/0xae0 net/core/dev.c:7945 RSP: 0018:ffff8801cc58f598 EFLAGS: 00010293 RAX: ffff8801cc57a500 RBX: dffffc0000000000 RCX: ffffffff841f75b2 RDX: 0000000000000000 RSI: 1ffff100398b1ede RDI: ffff8801bf1f8810 device syz0 entered promiscuous mode RBP: ffff8801cc58f898 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801bf1f8cd8 R13: ffff8801cc58f870 R14: ffff8801bf1f8780 R15: ffff8801cc58f7f0 FS: 0000000001716880(0000) GS:ffff8801db400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020b13000 CR3: 0000000005e25000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rtnl_unlock+0xe/0x10 net/core/rtnetlink.c:106 tun_detach drivers/net/tun.c:670 [inline] tun_chr_close+0x49/0x60 drivers/net/tun.c:2845 __fput+0x333/0x7f0 fs/file_table.c:210 ____fput+0x15/0x20 fs/file_table.c:244 task_work_run+0x199/0x270 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x9bb/0x1ae0 kernel/exit.c:865 do_group_exit+0x149/0x400 kernel/exit.c:968 SYSC_exit_group kernel/exit.c:979 [inline] SyS_exit_group+0x1d/0x20 kernel/exit.c:977 entry_SYSCALL_64_fastpath+0x1f/0x96 RIP: 0033:0x44ad19 Fixes: 30f7ea1c ("packet: race condition in packet_bind") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Mike Maloney authored
syzkaller found a race condition fanout_demux_rollover() while removing a packet socket from a fanout group. po->rollover is read and operated on during packet_rcv_fanout(), via fanout_demux_rollover(), but the pointer is currently cleared before the synchronization in packet_release(). It is safer to delay the cleanup until after synchronize_net() has been called, ensuring all calls to packet_rcv_fanout() for this socket have finished. To further simplify synchronization around the rollover structure, set po->rollover in fanout_add() only if there are no errors. This removes the need for rcu in the struct and in the call to packet_getsockopt(..., PACKET_ROLLOVER_STATS, ...). Crashing stack trace: fanout_demux_rollover+0xb6/0x4d0 net/packet/af_packet.c:1392 packet_rcv_fanout+0x649/0x7c8 net/packet/af_packet.c:1487 dev_queue_xmit_nit+0x835/0xc10 net/core/dev.c:1953 xmit_one net/core/dev.c:2975 [inline] dev_hard_start_xmit+0x16b/0xac0 net/core/dev.c:2995 __dev_queue_xmit+0x17a4/0x2050 net/core/dev.c:3476 dev_queue_xmit+0x17/0x20 net/core/dev.c:3509 neigh_connected_output+0x489/0x720 net/core/neighbour.c:1379 neigh_output include/net/neighbour.h:482 [inline] ip6_finish_output2+0xad1/0x22a0 net/ipv6/ip6_output.c:120 ip6_finish_output+0x2f9/0x920 net/ipv6/ip6_output.c:146 NF_HOOK_COND include/linux/netfilter.h:239 [inline] ip6_output+0x1f4/0x850 net/ipv6/ip6_output.c:163 dst_output include/net/dst.h:459 [inline] NF_HOOK.constprop.35+0xff/0x630 include/linux/netfilter.h:250 mld_sendpack+0x6a8/0xcc0 net/ipv6/mcast.c:1660 mld_send_initial_cr.part.24+0x103/0x150 net/ipv6/mcast.c:2072 mld_send_initial_cr net/ipv6/mcast.c:2056 [inline] ipv6_mc_dad_complete+0x99/0x130 net/ipv6/mcast.c:2079 addrconf_dad_completed+0x595/0x970 net/ipv6/addrconf.c:4039 addrconf_dad_work+0xac9/0x1160 net/ipv6/addrconf.c:3971 process_one_work+0xbf0/0x1bc0 kernel/workqueue.c:2113 worker_thread+0x223/0x1990 kernel/workqueue.c:2247 kthread+0x35e/0x430 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:432 Fixes: 0648ab70 ("packet: rollover prepare: per-socket state") Fixes: 509c7a1e ("packet: avoid panic in packet_getsockopt()") Reported-by:
Mike Maloney <maloney@google.com> Reviewed-by:
-
Hangbin Liu authored
[ Upstream commit f859b4af ] After parsing the sit netlink change info, we forget to update frag_off in ipip6_tunnel_update(). Fix it by assigning frag_off with new value. Reported-by:
Jianlin Shi <jishi@redhat.com> Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Acked-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Håkon Bugge authored
[ Upstream commit f3069c6d ] This is a fix for syzkaller719569, where memory registration was attempted without any underlying transport being loaded. Analysis of the case reveals that it is the setsockopt() RDS_GET_MR (2) and RDS_GET_MR_FOR_DEST (7) that are vulnerable. Here is an example stack trace when the bug is hit: BUG: unable to handle kernel NULL pointer dereference at 00000000000000c0 IP: __rds_rdma_map+0x36/0x440 [rds] PGD 2f93d03067 P4D 2f93d03067 PUD 2f93d02067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: bridge stp llc tun rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache rds binfmt_misc sb_edac intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul c rc32_pclmul ghash_clmulni_intel pcbc aesni_intel crypto_simd glue_helper cryptd iTCO_wdt mei_me sg iTCO_vendor_support ipmi_si mei ipmi_devintf nfsd shpchp pcspkr i2c_i801 ioatd ma ipmi_msghandler wmi lpc_ich mfd_core auth_rpcgss nfs_acl lockd grace sunrpc ip_tables ext4 mbcache jbd2 mgag200 i2c_algo_bit drm_kms_helper ixgbe syscopyarea ahci sysfillrect sysimgblt libahci mdio fb_sys_fops ttm ptp libata sd_mod mlx4_core drm crc32c_intel pps_core megaraid_sas i2c_core dca dm_mirror dm_region_hash dm_log dm_mod CPU: 48 PID: 45787 Comm: repro_set2 Not tainted 4.14.2-3.el7uek.x86_64 #2 Hardware name: Oracle Corporation ORACLE SERVER X5-2L/ASM,MOBO TRAY,2U, BIOS 31110000 03/03/2017 task: ffff882f9190db00 task.stack: ffffc9002b994000 RIP: 0010:__rds_rdma_map+0x36/0x440 [rds] RSP: 0018:ffffc9002b997df0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff882fa2182580 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffc9002b997e40 RDI: ffff882fa2182580 RBP: ffffc9002b997e30 R08: 0000000000000000 R09: 0000000000000002 R10: ffff885fb29e3838 R11: 0000000000000000 R12: ffff882fa2182580 R13: ffff882fa2182580 R14: 0000000000000002 R15: 0000000020000ffc FS: 00007fbffa20b700(0000) GS:ffff882fbfb80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000c0 CR3: 0000002f98a66006 CR4: 00000000001606e0 Call Trace: rds_get_mr+0x56/0x80 [rds] rds_setsockopt+0x172/0x340 [rds] ? __fget_light+0x25/0x60 ? __fdget+0x13/0x20 SyS_setsockopt+0x80/0xe0 do_syscall_64+0x67/0x1b0 entry_SYSCALL64_slow_path+0x25/0x25 RIP: 0033:0x7fbff9b117f9 RSP: 002b:00007fbffa20aed8 EFLAGS: 00000293 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 00000000000c84a4 RCX: 00007fbff9b117f9 RDX: 0000000000000002 RSI: 0000400000000114 RDI: 000000000000109b RBP: 00007fbffa20af10 R08: 0000000000000020 R09: 00007fbff9dd7860 R10: 0000000020000ffc R11: 0000000000000293 R12: 0000000000000000 R13: 00007fbffa20b9c0 R14: 00007fbffa20b700 R15: 0000000000000021 Code: 41 56 41 55 49 89 fd 41 54 53 48 83 ec 18 8b 87 f0 02 00 00 48 89 55 d0 48 89 4d c8 85 c0 0f 84 2d 03 00 00 48 8b 87 00 03 00 00 <48> 83 b8 c0 00 00 00 00 0f 84 25 03 00 0 0 48 8b 06 48 8b 56 08 The fix is to check the existence of an underlying transport in __rds_rdma_map(). Signed-off-by:
Håkon Bugge <haakon.bugge@oracle.com> Reported-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Jon Maloy authored
[ Upstream commit a7d5f107 ] When the function tipc_accept_from_sock() fails to create an instance of struct tipc_subscriber it omits to free the already created instance of struct tipc_conn instance before it returns. We fix that with this commit. Reported-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Al Viro authored
commit 2b04e8f6 upstream. we need to take care of failure exit as well - pages already in bio should be dropped by analogue of bio_unmap_pages(), since their refcounts had been bumped only once per reference in bio. Cc: stable@vger.kernel.org Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Heiko Carstens authored
commit fbbd7f1a upstream. The switch_to() macro has an optimization to avoid saving and restoring register contents that aren't needed for kernel threads. There is however the possibility that a kernel thread execve's a user space program. In such a case the execve'd process can partially see the contents of the previous process, which shouldn't be allowed. To avoid this, simply always save and restore register contents on context switch. Cc: <stable@vger.kernel.org> # v2.6.37+ Fixes: fdb6d070 ("switch_to: dont restore/save access & fpu regs for kernel threads") Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Masamitsu Yamazaki authored
commit 4f7f5551 upstream. System may crash after unloading ipmi_si.ko module because a timer may remain and fire after the module cleaned up resources. cleanup_one_si() contains the following processing. /* * Make sure that interrupts, the timer and the thread are * stopped and will not run again. */ if (to_clean->irq_cleanup) to_clean->irq_cleanup(to_clean); wait_for_timer_and_thread(to_clean); /* * Timeouts are stopped, now make sure the interrupts are off * in the BMC. Note that timers and CPU interrupts are off, * so no need for locks. */ while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) { poll(to_clean); schedule_timeout_uninterruptible(1); } si_state changes as following in the while loop calling poll(to_clean). SI_GETTING_MESSAGES => SI_CHECKING_ENABLES => SI_SETTING_ENABLES => SI_GETTING_EVENTS => SI_NORMAL As written in the code comments above, timers are expected to stop before the polling loop and not to run again. But the timer is set again in the following process when si_state becomes SI_SETTING_ENABLES. => poll => smi_event_handler => handle_transaction_done // smi_info->si_state == SI_SETTING_ENABLES => start_getting_events => start_new_msg => smi_mod_timer => mod_timer As a result, before the timer set in start_new_msg() expires, the polling loop may see si_state becoming SI_NORMAL and the module clean-up finishes. For example, hard LOCKUP and panic occurred as following. smi_timeout was called after smi_event_handler, kcs_event and hangs at port_inb() trying to access I/O port after release. [exception RIP: port_inb+19] RIP: ffffffffc0473053 RSP: ffff88069fdc3d80 RFLAGS: 00000006 RAX: ffff8806800f8e00 RBX: ffff880682bd9400 RCX: 0000000000000000 RDX: 0000000000000ca3 RSI: 0000000000000ca3 RDI: ffff8806800f8e40 RBP: ffff88069fdc3d80 R8: ffffffff81d86dfc R9: ffffffff81e36426 R10: 00000000000509f0 R11: 0000000000100000 R12: 0000000000]:000000 R13: 0000000000000000 R14: 0000000000000246 R15: ffff8806800f8e00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 --- <NMI exception stack> --- To fix the problem I defined a flag, timer_can_start, as member of struct smi_info. The flag is enabled immediately after initializing the timer and disabled immediately before waiting for timer deletion. Fixes: 0cfec916 ("ipmi: Start the timer and thread on internal msgs") Signed-off-by:
Yamazaki Masamitsu <m-yamazaki@ah.jp.nec.com> [Adjusted for recent changes in the driver.] [Some fairly major changes went into the IPMI driver in 4.15, so this required a backport as the code had changed and moved to a different file. The 4.14 version of this patch moved some code under an if statement and there was an API change causing it to not apply to 4.4-4.6.] Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
-
Paul Moore authored
[ Upstream commit 173743dd ] Prior to this patch we enabled audit in audit_init(), which is too late for PID 1 as the standard initcalls are run after the PID 1 task is forked. This means that we never allocate an audit_context (see audit_alloc()) for PID 1 and therefore miss a lot of audit events generated by PID 1. This patch enables audit as early as possible to help ensure that when PID 1 is forked it can allocate an audit_context if required. Reviewed-by:
Richard Guy Briggs <rgb@redhat.com> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Keefe Liu authored
[ Upstream commit ca29fd7c ] When process the outbound packet of ipv6, we should assign the master device to output device other than input device. Signed-off-by:
Keefe Liu <liuqifa@huawei.com> Acked-by:
Mahesh Bandewar <maheshb@google.com> Signed-off-by:
-
David Howells authored
[ Upstream commit f4b3526d ] The handler for the CB.ProbeUuid operation in the cache manager is implemented, but isn't listed in the switch-statement of operation selection, so won't be used. Fix this by adding it. Signed-off-by:
-
Majd Dibbiny authored
[ Upstream commit 31fde034 ] The UMR's QP is created by calling mlx5_ib_create_qp directly, and therefore the send CQ and the recv CQ on the ibqp weren't assigned. Assign them right after calling the mlx5_ib_create_qp to assure that any access to those pointers will work as expected and won't crash the system as might happen as part of reset flow. Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by:
Majd Dibbiny <majd@mellanox.com> Reviewed-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Mark Bloch authored
[ Upstream commit 5f22a1d8 ] Maximal message should be used as a limit to the max message payload allowed, without the headers. The ConnectX-3 check is done against this value includes the headers. When the payload is 4K this will cause the NIC to drop packets. Increase maximal message to 8K as workaround, this shouldn't change current behaviour because we continue to set the MTU to 4k. To reproduce; set MTU to 4296 on the corresponding interface, for example: ifconfig eth0 mtu 4296 (both server and client) On server: ib_send_bw -c UD -d mlx4_0 -s 4096 -n 1000000 -i1 -m 4096 On client: ib_send_bw -d mlx4_0 -c UD <server_ip> -s 4096 -n 1000000 -i 1 -m 4096 Fixes: 6e0d733d ("IB/mlx4: Allow 4K messages for UD QPs") Signed-off-by:
Mark Bloch <markb@mellanox.com> Reviewed-by:
-
Herbert Xu authored
[ Upstream commit 0e74aa1d ] The syzbot found an ancient bug in the IPsec code. When we cloned a socket policy (for example, for a child TCP socket derived from a listening socket), we did not copy the family field. This results in a live policy with a zero family field. This triggers a BUG_ON check in the af_key code when the cloned policy is retrieved. This patch fixes it by copying the family field over. Reported-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Jason Baron authored
[ Upstream commit 92ee46ef ] Fengguang Wu reported that running the rcuperf test during boot can cause the jump_label_test() to hit a WARN_ON(). The issue is that the core jump label code relies on kernel_text_address() to detect when it can no longer update branches that may be contained in __init sections. The kernel_text_address() in turn assumes that if the system_state variable is greter than or equal to SYSTEM_RUNNING then __init sections are no longer valid (since the assumption is that they have been freed). However, when rcuperf is setup to run in early boot it can call kernel_power_off() which sets the system_state to SYSTEM_POWER_OFF. Since rcuperf initialization is invoked via a module_init(), we can make the dependency of jump_label_test() needing to complete before rcuperf explicit by calling it via early_initcall(). Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Jason Baron <jbaron@akamai.com> Acked-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1510609727-2238-1-git-send-email-jbaron@akamai.comSigned-off-by:
-
Arvind Yadav authored
[ Upstream commit bde533f2 ] atm_dev_register() can fail here and passed parameters to free irq which is not initialised. Initialization of 'dev->irq' happened after the 'goto out_free_irq'. So using 'irq' insted of 'dev->irq' in free_irq(). Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit cea0cc80 ] Commit dfcb9f4f ("sctp: deny peeloff operation on asocs with threads sleeping on it") fixed the race between peeloff and wait sndbuf by checking waitqueue_active(&asoc->wait) in sctp_do_peeloff(). But it actually doesn't work, as even if waitqueue_active returns false the waiting sndbuf thread may still not yet hold sk lock. After asoc is peeled off, sk is not asoc->base.sk any more, then to hold the old sk lock couldn't make assoc safe to access. This patch is to fix this by changing to hold the new sk lock if sk is not asoc->base.sk, meanwhile, also set the sk in sctp_sendmsg with the new sk. With this fix, there is no more race between peeloff and waitbuf, the check 'waitqueue_active' in sctp_do_peeloff can be removed. Thanks Marcelo and Neil for making this clear. v1->v2: fix it by changing to lock the new sock instead of adding a flag in asoc. Suggested-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
-
