- 16 Mar, 2020 15 commits
-
-
YueHaibing authored
drivers/crypto/chelsio/chcr_ktls.c: In function chcr_ktls_cpl_set_tcb_rpl: drivers/crypto/chelsio/chcr_ktls.c:662:11: warning: variable status set but not used [-Wunused-but-set-variable] commit 8a30923e ("cxgb4/chcr: Save tx keys and handle HW response") involved this unused variable, remove it. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Era Mayflower authored
Netlink support of extended packet number cipher suites, allows adding and updating XPN macsec interfaces. Added support in: * Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites. * Setting and getting 64bit packet numbers with of SAs. * Setting (only on SA creation) and getting ssci of SAs. * Setting salt when installing a SAK. Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1: * MACSEC_CIPHER_ID_GCM_AES_XPN_128 * MACSEC_CIPHER_ID_GCM_AES_XPN_256 In addition, added 2 new netlink attribute types: * MACSEC_SA_ATTR_SSCI * MACSEC_SA_ATTR_SALT Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw. Signed-off-by:Era Mayflower <mayflowerera@gmail.com> Signed-off-by:
-
Era Mayflower authored
Support extended packet number cipher suites (802.1AEbw) frames handling. This does not include the needed netlink patches. * Added xpn boolean field to `struct macsec_secy`. * Added ssci field to `struct_macsec_tx_sa` (802.1AE figure 10-5). * Added ssci field to `struct_macsec_rx_sa` (802.1AE figure 10-5). * Added salt field to `struct macsec_key` (802.1AE 10.7 NOTE 1). * Created pn_t type for easy access to lower and upper halves. * Created salt_t type for easy access to the "ssci" and "pn" parts. * Created `macsec_fill_iv_xpn` function to create IV in XPN mode. * Support in PN recovery and preliminary replay check in XPN mode. In addition, according to IEEE 802.1AEbw figure 10-5, the PN of incoming frame can be 0 when XPN cipher suite is used, so fixed the function `macsec_validate_skb` to fail on PN=0 only if XPN is off. Signed-off-by: -
David S. Miller authored
Russell King says: ==================== net: dsa: improve serdes integration Depends on "net: mii clause 37 helpers". Andrew Lunn mentioned that the Serdes PCS found in Marvell DSA switches does not automatically update the switch MACs with the link parameters. Currently, the DSA code implements a work-around for this. This series improves the Serdes integration, making use of the recent phylink changes to support split MAC/PCS setups. One noticable improvement for userspace is that ethtool can now report the link partner's advertisement. This repost has no changes compared to the previous posting; however, the regression Andrew had found which exists even without this patch set has now been fixed by Andrew and merged into the net-next tree. ==================== Signed-off-by: -
Russell King authored
Use the status of the PHY_DETECT bit to determine whether we need to force the MAC settings in mac_link_up() and mac_link_down(). Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Russell King authored
The port_link_state method is only used by mv88e6xxx_port_setup_mac(), which is now only called during port setup, rather than also being called via phylink's mac_config method. Remove this now unnecessary optimisation, which allows us to remove the port_link_state methods as well. Signed-off-by:
-
Russell King authored
Setting the speed independently of duplex makes little sense; the two parameters result from negotiation or fixed setup, and may have inter- dependencies. Moreover, they are always controlled via the same register - having them split means we have to read-modify-write this register twice. Combine the two operations into a single port_set_speed_duplex() operation. Not only is this more efficient, it reduces the size of the code as well. Signed-off-by:
-
Russell King authored
phylink_mac_change() is supposed to be called with a 'false' argument if the link has gone down since it was last reported up; this is to ensure that link events along with renegotiation events are always correctly reported to userspace. Read the BMSR once when we have an interrupt, and report the link latched status to phylink via phylink_mac_change(). phylink will deal automatically with re-reading the link state once it has processed the link-down event. Signed-off-by:
-
Russell King authored
Extend the mv88e6xxx phylink implementation down to Serdes PHYs, which handle the PCS layer of such links. - Implement phylink PCS link state reading, so that we can provide ethtool with the linkmodes and link speed in the expected manner. Note: this will only be called for in-band negotiation, which is only supported by the serdes interfaces. - Implement phylink PCS configuration, so that the in-band AN and advertisement can be configured. - Implement phylink PCS negotiation restart, so that the in-band AN can be restarted. - Implement phylink PCS link up, so that when operating out-of-band, the Serdes can be configured for the appropriate fixed speed mode. Signed-off-by:
-
Russell King authored
Only configure the interface settings in mac_config(), leaving the speed and duplex settings to mac_link_up to deal with. Signed-off-by:
-
Russell King authored
The SGMII/1000base-X serdes register set is a clause 22 register set offset at 0x2000 in the PHYXS device. Rather than inventing our own defintions, use those that already exist, and name the register MV88E6390_SGMII_BMCR. Also remove the unused MV88E6390_SGMII_STATUS definitions. Signed-off-by:
-
Russell King authored
Issue a warning to the kernel log if phylink_mac_link_state() returns an error. This should not occur, but let's make it visible. Signed-off-by:
-
David S. Miller authored
Russell King says: ==================== net: mii clause 37 helpers This is a re-post of two patches that are common to two series that I've sent in recent weeks; I'm re-posting them separately in the hope that they can be merged. No changes from either of the previous postings. These patches: 1. convert the existing (unused) mii_lpa_to_ethtool_lpa_x() function to a linkmode variant. 2. add a helper for clause 37 advertisements, supporting both the 1000baseX and defacto 2500baseX variants. Note that ethtool does not support half duplex for either of these, and we make no effort to do so. ==================== Signed-off-by: -
Russell King authored
Add a helper to convert a linkmode advertisement to a clause 37 advertisement value for 1000base-x and 2500base-x. Signed-off-by:
-
Russell King authored
Add a LPA to linkmode decoder for 1000BASE-X protocols; this decoder only provides the modify semantics similar to other such decoders. This replaces the unused mii_lpa_to_ethtool_lpa_x() helper. Signed-off-by:
-
- 15 Mar, 2020 25 commits
-
-
Alexander Bersenev authored
The ndp32->wLength is two bytes long, so replace cpu_to_le32 with cpu_to_le16. Fixes: 0fa81b30 ("cdc_ncm: Implement the 32-bit version of NCM Transfer Block") Signed-off-by:
Alexander Bersenev <bay@hackerdom.ru> Signed-off-by:
-
David S. Miller authored
Paolo Abeni says: ==================== mptcp: simplify mptcp_accept() Currently we allocate the MPTCP master socket at accept time. The above makes mptcp_accept() quite complex, and requires checks is several places for NULL MPTCP master socket. These series simplify the MPTCP accept implementation, moving the master socket allocation at syn-ack time, so that we drop unneeded checks with the follow-up patch. v1 -> v2: - rebased on top of 2398e399 ==================== Signed-off-by:
-
Paolo Abeni authored
After the previous patch subflow->conn is always != NULL and is never changed. We can drop a bunch of now unneeded checks. v1 -> v2: - rebased on top of commit 2398e399 ("mptcp: always include dack if possible.") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
-
Paolo Abeni authored
This change moves the mptcp socket allocation from mptcp_accept() to subflow_syn_recv_sock(), so that subflow->conn is now always set for the non fallback scenario. It allows cleaning up a bit mptcp_accept() reducing the additional locking and will allow fourther cleanup in the next patch. Signed-off-by:
-
Dejin Zheng authored
Use devm_platform_ioremap_resource() to simplify code, which contains platform_get_resource and devm_ioremap_resource. Signed-off-by:
Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
Being a non-physical port, the CPU port does not have an ocelot_port structure, so the ocelot_port_writel call inside the ocelot_port_set_maxlen() function would access data behind a NULL pointer. This is a patch for net-next only, the net tree boots fine, the bug was introduced during the net -> net-next merge. Fixes: 1d343579 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net") Fixes: a8015ded ("net: mscc: ocelot: properly account for VLAN header length when setting MRU") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Hoang Le authored
Calling: tipc_node_link_down()-> - tipc_node_write_unlock()->tipc_mon_peer_down() - tipc_mon_peer_down() just after disabling bearer could be caused kernel oops. Fix this by adding a sanity check to make sure valid memory access. Acked-by:
Jon Maloy <jmaloy@redhat.com> Signed-off-by:
Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by:
-
Hoang Le authored
Checking and returning 'true' boolean is useless as it will be returning at end of function Signed-off-by:
Ying Xue <ying.xue@windriver.com> Acked-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== ethtool: consolidate irq coalescing - part 5 Convert more drivers following the groundwork laid in a recent patch set [1] and continued in [2], [3], [4]. The aim of the effort is to consolidate irq coalescing parameter validation in the core. This set converts further 15 drivers in drivers/net/ethernet. One more conversion sets to come. [1] https://lore.kernel.org/netdev/20200305051542.991898-1-kuba@kernel.org/ [2] https://lore.kernel.org/netdev/20200306010602.1620354-1-kuba@kernel.org/ [3] https://lore.kernel.org/netdev/20200310021512.1861626-1-kuba@kernel.org/ [4] https://lore.kernel.org/netdev/20200311223302.2171564-1-kuba@kernel.org/ ==================== Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver already correctly rejected almost all unsupported parameters (missing sample_rate_interval). As a side effect of these changes the error code for unsupported params changes from EINVAL to EOPNOTSUPP. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. As a side effect of these changes the error code for unsupported params changes from EINVAL to EOPNOTSUPP. The driver was missing a check for rate_sample_interval. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver correctly rejects all unsupported parameters, no functional changes. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver correctly rejects all unsupported parameters, no functional changes. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
Matteo Croce <mcroce@redhat.com> Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
Jakub Kicinski authored
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by:
-
David S. Miller authored
Antoine Tenart says: ==================== net: phy: split the mscc driver This is a proposal to split the MSCC PHY driver, as its code base grew a lot lately (it's already 3800+ lines). It also supports features requiring a lot of code (MACsec), which would gain in being split from the driver core, for readability and maintenance. This is also done as other features should be coming later, which will also need lots of code addition. This series shouldn't change the way the driver works. I checked, and there were no patch pending on this driver. This change was done on top of all the modifications done on this driver in net-next. Since v2: - Defined inline functions as static inline. - Fixed a locking issue reported by Kbuild. Since v1: - Moved more definitions into the mscc_macsec.h header. ==================== Signed-off-by:
-
