Merge tag 'aspeed-5.5-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/defconfig

ASPEED device tree updates for 5.5

This adds recently merged drivers to the aspeed g4 and g5 defconfigs,
and to the multi v5 and v7 shared defconfigs.

* tag 'aspeed-5.5-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
  ARM: config: multi_v5: ASPEED SDHCI, SGPIO
  ARM: configs: multi_v7: ASPEED network, gpio, FSI
  ARM: config: aspeed-g4: Add MMC, and cleanup
  ARM: config: aspeed-g5: Add SGPIO and FSI drivers
  ARM: config: aspeed-g5: Enable 8250_DW quirks

Link: https://lore.kernel.org/r/CACPK8Xc3a=6irkTSfwyPrr=nWv_fa9nMxthtC2AyqFJEWvuMwg@mail.gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

Enable drivers used by the ASPEED AST2400 SoC so the multi v5 defconfig
can run on those boards.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joel Stanley <joel@jms.id.au>

Enable drivers used by the ASPEED SoCs so the multi v7 defconfig can run
on those boards.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joel Stanley <joel@jms.id.au>

The PCA muxes now depend on I2C_MUX. SPI si now required by SPI-NOR.

Add the eMMC driver, and remove the FSI SBEFIFO which is not used on AST2400
systems.

The remaining changes are cleanups from regenerating the defconfig.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joel Stanley <joel@jms.id.au>

These are recently merged drivers for ASPEED systems.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joel Stanley <joel@jms.id.au>

This driver option is used by the AST2600 A0 boards to work around a
hardware issue.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joel Stanley <joel@jms.id.au>

Merge tag 'at91-5.5-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/defconfig

AT91 defconfig for 5.5

 - Unselect PIT now that the TCBs can be used at boot time

* tag 'at91-5.5-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: configs: at91: unselect PIT

Link: https://lore.kernel.org/r/20191107222445.GA202433@piout.netSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'qcom-defconfig-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig

Qualcomm ARM Based defconfig Updates for v5.5

* Enable OCMEM support

* tag 'qcom-defconfig-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  ARM: qcom_defconfig: add ocmem support

Link: https://lore.kernel.org/r/1573068840-13098-3-git-send-email-agross@kernel.orgSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx-defconfig-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig

i.MX defconfig update for 5.5:
 - Enable i.MX7ULP watchdog, DA9052 touch and USB configfs support
   in imx_v6_v7_defconfig.
 - Enable newly added S32V234 SoC and its UART driver support in arm64
   defconfig.
 - Built i.MX8QXP SCU key driver as module in arm64 defconfig.
 - Change AT803X Ethernet PHY driver from module to built-in, so that
   we can boot i.MX8MM EVK board with rootfs on NFS.

* tag 'imx-defconfig-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: defconfig: Change CONFIG_AT803X_PHY from m to y
  ARM: imx_v6_v7_defconfig: Enable CONFIG_TOUCHSCREEN_DA9052
  arm64: defconfig: Enable configs for S32V234
  arm64: defconfig: Enable CONFIG_KEYBOARD_IMX_SC_KEY as module
  ARM: imx_v6_v7_defconfig: Build USB_CONFIGFS into kernel
  ARM: imx_v6_v7_defconfig: Enable CONFIG_IMX7ULP_WDT by default

Link: https://lore.kernel.org/r/20191105150315.15477-7-shawnguo@kernel.orgSigned-off-by: Olof Johansson <olof@lixom.net>

With phy-reset-gpios are enabled for i.MX8MM-EVK board, phy
will be reset. Without CONFIG_AT803X_PHY as y, board will stop
booting in NFS DHCP, because phy is not ready. So mark
CONFIG_AT803X_PHY from m to y to make board boot when using nfs rootfs.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Merge tag 'tegra-for-5.5-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig

ARM: tegra: Default configuration changes for v5.5-rc1

Enables the Tegra VDE driver by default. This is currently in staging
but can be used with existing userspace to do hardware-accelerated video
decoding of H.264 streams.

* tag 'tegra-for-5.5-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: Enable Tegra VDE driver in tegra_defconfig

Link: https://lore.kernel.org/r/20191102144521.3863321-7-thierry.reding@gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'sunxi-config64-for-5.5-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/defconfig

One new patch to the arm64 defconfig to enable the new crypto engine
driver.

* tag 'sunxi-config64-for-5.5-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm64: defconfig: add new Allwinner crypto options

Link: https://lore.kernel.org/r/539241d6-9b2e-4d5b-bd63-f912cf6ebf96.lettre@localhostSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'sunxi-config-for-5.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/defconfig

Two new drivers enabled in sunxi_defconfig: one for the PHY found on
multiple boards, one for the new crypto driver.

* tag 'sunxi-config-for-5.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  ARM: configs: sunxi: Enable MICREL_PHY
  ARM: configs: sunxi: add new Allwinner crypto options

Link: https://lore.kernel.org/r/27125172-7ce8-427e-83f9-8e9bd69d50a4.lettre@localhostSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-arm64-defconfig-for-v5.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig

Renesas ARM64 defconfig updates for v5.5 (take two)

  - Enable support for the new R-Car M3-W+ (r8a77961) SoC.

* tag 'renesas-arm64-defconfig-for-v5.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  arm64: defconfig: Enable R8A77961 SoC

Link: https://lore.kernel.org/r/20191101155842.31467-4-geert+renesas@glider.beSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-arm-defconfig-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig

Renesas ARM defconfig updates for v5.5

  - Refresh shmobile_defconfig for v5.4-rc1.

* tag 'renesas-arm-defconfig-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  ARM: shmobile: defconfig: Refresh for v5.4-rc1

Link: https://lore.kernel.org/r/20191101155842.31467-2-geert+renesas@glider.beSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'hisi-arm64-defconfig-for-5.5' of git://github.com/hisilicon/linux-hisi into arm/defconfig

ARM64: hisilicon: defconfig updates for 5.5

- enable ARM SMMUv3 PMU and hisi ZIP controller as module for
  Kunpeng920 SoC

* tag 'hisi-arm64-defconfig-for-5.5' of git://github.com/hisilicon/linux-hisi:
  arm64: defconfig: Enable SMMU v3 PMCG
  arm64: defconfig: Enable HiSilicon ZIP controller

Link: https://lore.kernel.org/r/5DB95B1E.8060607@hisilicon.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'arm64_defconfig_for_v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/defconfig

arm64 defconfig for v5.5
- Add SPI_CADENCE_QUADSPI to support the Cadence QSPI driver
- Add INTEL_STRATIX10_RSU as a module to support the Remote Service
  Update driver on Stratix10 and Agilex platforms
- Add GPIO_ALTERA as a module to support the Altera GPIO driver

* tag 'arm64_defconfig_for_v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  arm64: defconfig: enable Altera GPIO controller
  arm64: defconfig: enable rsu driver
  arm64: defconfig: enable the Cadence QSPI controller

Link: https://lore.kernel.org/r/20191029143737.24850-2-dinguyen@kernel.orgSigned-off-by: Olof Johansson <olof@lixom.net>

Update the defconfig for Renesas ARM boards:
  - Drop CONFIG_ARM_ERRATA_754322=y (auto-enabled since commit
    2eced460 ("soc: renesas: Enable ARM_ERRATA_754322 for
    affected Cortex-A9")),
  - Drop CONFIG_MTD_M25P80=y (removed in commit b35b9a10 ("mtd:
    spi-nor: Move m25p80 code in spi-nor.c")),
  - Drop CONFIG_LCD_CLASS_DEVICE=n (no longer auto-enabled since commit
    bcd69da9 ("video: backlight: Drop default m for
    {LCD,BACKLIGHT_CLASS_DEVICE}")).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191025135325.32242-1-geert+renesas@glider.be

Enable the Renesas R-Car M3-W+ (R8A77961) SoC in the ARM64 defconfig.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191023123342.13100-11-geert+renesas@glider.be

Include support for Micrel KSZ9031 PHY driver in sunxi_defconfig,
which fixes issues of link not coming up at boot time with
certain link partners.

Micrel KSZ9031 PHY chip is used on Olimex A20-OLinuXino-LIME2
boards.

The errata fix itself has been implemented in commit
"3aed3e2a: net: phy: micrel: add Asym Pause workaround"
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

This patch adds the new allwinner crypto configs to ARM64 defconfig
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

This patch adds the new Allwinner crypto configs to sunxi_defconfig
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

The video decoder driver was tested by time and works absolutely fine.
The reason why it is in staging is because it doesn't provide common V4L
interface yet, this shouldn't stop driver enabling in the defconfig since
our userspace (libvdpau-tegra) provides combined acceleration of decoding
and displaying without use of V4L.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Enable the CONFIG_TOUCHSCREEN_DA9052 option, so that touchscreen
can be functional by default on imx53-qsb.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Enable support for the S32V234 SoC, including the previously added UART
driver.
Signed-off-by: Mihaela Martinas <Mihaela.Martinas@freescale.com>
Signed-off-by: Adrian.Nitu <adrian.nitu@freescale.com>
Signed-off-by: Stoica Cosmin-Stefan <cosmin.stoica@nxp.com>
Signed-off-by: Stefan-Gabriel Mirea <stefan-gabriel.mirea@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Select CONFIG_KEYBOARD_IMX_SC_KEY as module by default to
support i.MX8QXP scu key driver.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

HiSilicon Kunpeng920 SoC's SMMU has Performance Monitor Counter Groups(PMCG).
This patch enables related driver in defconfig.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Enable CONFIG_CRYPTO_DEV_HISI_ZIP for HiSilicon ZIP controller in Kunpeng920
SoC.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Enable GPIO_ALTERA driver.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>

This commits enable (as module):
- STM32 SAI and I2S configs used on stm32mp157.
- Cirrus CS42L51 audio codec for stm32mp157a-dk1 board.
- Audio graph card support for stm32mp157a-dk1 board.

Link: https://lore.kernel.org/r/20191025125632.11057-1-alexandre.torgue@st.comSigned-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v5.5/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/defconfig

Defconfig changes for omap2plus_defconfig for v5.5

A series of changes from Adam Ford to update for removed and moved items,
and then enable crypto devices and MT9P031 video as loadable modules.

Looks like I missed unifying the subject line for one commit, but I did
not want to mess with the commit after pushing it out.

* tag 'omap-for-v5.5/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  configs: omap2plus: Enable VIDEO_MT9P031 module
  ARM: omap2plus_defconfig: Enable HW Crypto engine modules
  ARM: omap2plus_defconfig: Update for moved item
  ARM: omap2plus_defconfig: Update for removed items

Link: https://lore.kernel.org/r/pull-1571853258-16998@atomide.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v5.4/fixes-rc3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes

Fixes for omaps for v5.4-rc cycle

More fixes for omap variants:

- Update more panel options in omap2plus_defconfig that got changed
  as we moved to use generic LCD panels

- Remove unused twl_keypad for logicpd-torpedo-som to avoid boot
  time warnings. This is only a cosmetic fix, but at least dmesg output
  is now getting more readable after all the fixes to remove pointless
  warnings

- Fix gpu_cm node name as we still have a non-standard node name
  dependency for clocks. This should eventually get fixed by use
  of domain specific compatible property

- Fix use of i2c-mux-idle-disconnect for m3874-iceboard

- Use level interrupt for omap4 & 5 wlcore to avoid lost edge
  interrupts

* tag 'omap-for-v5.4/fixes-rc3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: Use level interrupt for omap4 & 5 wlcore
  ARM: dts: am3874-iceboard: Fix 'i2c-mux-idle-disconnect' usage
  ARM: dts: omap5: fix gpu_cm clock provider name
  ARM: dts: logicpd-torpedo-som: Remove twl_keypad
  ARM: omap2plus_defconfig: Fix selected panels after generic panel changes

Link: https://lore.kernel.org/r/pull-1571242890-118432@atomide.comSigned-off-by: Olof Johansson <olof@lixom.net>

Enable Intel Stratix10 Remote System Update (RSU) driver

The Intel Remote System Update (RSU) driver provides a way for customers
to update the boot configuration of a Intel Stratix 10 SoC device with
significantly reduced risk of corrupting the bitstream storage and
bricking the system.
Signed-off-by: Richard Gong <richard.gong@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>

The Logic PD Torpedo Development Kit supports a Leopard Imaging
camera based on the Aptina MT9P031 sensor.

This patch enables this to be built as a module.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Marvell MMP/PXA/MMP2 platforms seem to be excluded from the defconfig
for no good reasons. Enable the DT-based boards along with modules for
their peripherals.

Link: https://lore.kernel.org/r/20191017145705.2867950-1-lkundrak@v3.skSigned-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'samsung-defconfig-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/defconfig

Samsung defconfig changes for v5.5

1. Enable Dynamic Memory Controller driver for Exynos5422,
2. Enable Arndale (Exynos5250) audio driver,
3. Sync multi_v7 defconfig with exynos by enabling useful and necessary
   drivers (NFC, watchdog, S2MPA01 regulator, IOMMU, Maxim extcon
   drivers, PHY for SATA and devfreq).

* tag 'samsung-defconfig-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: multi_v7_defconfig: Enable Exynos bus and memory frequency scaling (devfreq)
  ARM: multi_v7_defconfig: Enable options for boards with Exynos SoC
  ARM: exynos_defconfig: Enable Arndale audio driver
  ARM: exynos_defconfig: Enable DMC driver

Link: https://lore.kernel.org/r/20191021180453.29455-2-krzk@kernel.orgSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-arm64-defconfig-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig

Renesas ARM64 defconfig updates for v5.5

  - Enable support for the new RZ/G2N (r8a774b1) SoC.

* tag 'renesas-arm64-defconfig-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  arm64: defconfig: Enable R8A774B1 SoC

Link: https://lore.kernel.org/r/20191018101136.26350-3-geert+renesas@glider.beSigned-off-by: Olof Johansson <olof@lixom.net>

Since there are enough consumers (drivers) for Actions Semi platform in
mainline, let's enable it in ARM64 defconfig. As of now, this platform
can boot a distro from eMMC/uSD.

Link: https://lore.kernel.org/r/20191015152204.5610-1-manivannan.sadhasivam@linaro.orgSigned-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Enable the Cadence QSPI controller driver that is on the Stratix10 and
Agilex platforms.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>

The PIT is not required anymore to successfully boot and may actually harm
in case preempt-rt is used because the PIT interrupt is shared.
Disable it so the TCB clocksource is used.

Link: https://lore.kernel.org/r/20191009194814.15034-1-alexandre.belloni@bootlin.comAcked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Alexander Dahl <ada@thorsis.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>