- 22 Aug, 2009 40 commits
-
-
Kashyap, Desai authored
Removed mptscsih_timer_expired. This timer is no more use. Signed-off-by:James Bottomley <James.Bottomley@suse.de>
-
Kashyap, Desai authored
Change DEFINED value of can queue for FC and SAS devices. Signed-off-by: -
Chandra Seetharaman authored
Reported-by:
Rice Brown <rick.brown@oit.gatech.edu> Signed-Off-by:
Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by:
-
James Bottomley authored
Universally, SCSI functions assume the lengths fed in are those of the buffer to DMA data to, not the lengths of the data minus the header. scsi_vpd_inquiry() assumed the latter and got it wrong, so fix up all the functions to use the correct assumption (and fix a bug where INQUIRY in SCSI-2 dcannot go over 255). [jejb: Matthew posted an identical version of this at the same time I did] Signed-off-by:
Matthew Wilcox <matthew@wil.cx> Signed-off-by:
-
Michael Reed authored
An IBM tape drive failed to complete a PERSISTENT RESERVE IN within the scsi cmd timeout. Error recovery was initiated and it sequenced from abort through taking the tape drive offline. The device was taken offline because it repeatedly responded to the TUR command issued by error recovery with a RESERVATION CONFLICT status. The tape drive was reserved to another system. This is perfectly legitimate response to TUR, and is one that an escalation of recovery is unlikely to clear. Further, escalation of recovery can have undesirable side effects on the operation of tape drives shared with other initiators. Instead of escalating recovery, error recovery should treat the RESERVATION CONFLICT response to the TUR as a good status, giving the issuer of the command the opportunity to handle the timeout and reservation conflict. Signed-off-by:
Michael reed <mdr@sgi.com> Signed-off-by:
-
Jiri Slaby authored
In nsp_cs_config there is a wrong struct nsp_cs_configdata allocation. It allocates only sizeof(pointer to nsp_cs_configdata) for a whole structure. Add a dereference to the sizeof to allocate sizeof(nsp_cs_configdata). Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
-
Davidlohr Bueso A authored
Verify that ch->dt is not NULL before using it. Signed-off-by:
Davidlohr Bueso <dave@gnu.org> Signed-off-by:
-
Sage Weil authored
The allocated struct is manually zeroed after allocation, so avoid using the (broken) kzalloc mempool (which does not re-zero previously used items when they are returned to the pool). Acked-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
Sage Weil <sage@newdream.net> Signed-off-by:
-
Giridhar Malavali authored
Signed-off-by:
Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
-
Anirban Chakraborty authored
When the multiqueue mode fails to work, the driver falls back on single queue mode. This ensures that the firmware is reinitialized with single queue options and all the resources are readjusted accordingly. Signed-off-by:
Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
-
Anirban Chakraborty authored
The interrupt handler clears the interrupt status register for response updates in the base queue while working in the multique mode. This could lead to missing interrupt for async events, mail box completions etc. as these are also handled in the base queue. The fix ensures that the interrupt bit is not cleared for response updates in the ISR when the driver is working in multiqueue mode. Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Shyam Sundar authored
One byte added to make the IOCB structure satisfy size requirements. Signed-off-by:
Shyam Sundar <shyam.sundar@qlogic.com> Signed-off-by:
-
Santosh Vernekar authored
Signed-off-by:
Santosh Vernekar <santosh.vernekar@qlogic.com> Signed-off-by:
-
Lalit Chandivade authored
If vports are created and topology is changed to Loop only, the driver continuously gets a LIP reset occurred and keeps trying to enable the vport. Only manage requests during F_Port. Signed-off-by:
Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by:
-
Santosh Vernekar authored
Signed-off-by:
-
Santosh Vernekar authored
The RSCN processing is skipped if the event received is global and vha is not recipient. Signed-off-by:
-
Andrew Vasquez authored
Treat a global port-unavailable PORT_UPDATE (8014h) AEN as a loop-down event. For this case, within the FCoE domain, the 'logical' interface has been terminated, but the driver will not receive the classic LOOP_DOWN AEN. Signed-off-by:
-
Ravi Anand authored
Signed-off-by:
Ravi Anand <ravi.anand@qlogic.com> Signed-off-by:
-
Chandra Seetharaman authored
Use scsi_dh_set_params() set parameters provided. Save the parameters in parse_hw_handler() and use it in parse_path(). Reported-by:
Eddie Williams <Eddie.Williams@steeleye.com> Signed-off-by:
-
Chandra Seetharaman authored
Handle the parameters provided by user thru multipath. This handler expects only 2 parameters and their value can either be 0 or 1. This code originates from the old dm-emc.c file. Appropriate changes have been made to make it work in the new design. Reported-by:
-
Chandra Seetharaman authored
When we moved the device handler functionality from dm layer to SCSI layer we dropped the parameter functionality. This path adds an interface to scsi dh layer to set device handler parameters. Basically, multipath layer need to create a string with all the parameters and call scsi_dh_set_params() after it called scsi_dh_attach() on a device. If a device handler provides such an interface it will handle the parameters as it expects them. Reported-by:
-
James Bottomley authored
Now that hot add works correctly, if a new device is added, we're still operating on stale enclosure data, so fix that by updating the enclosure diagnostic pages when we get notified of a device hot add Signed-off-by:
-
James Bottomley authored
Right at the moment, hot removal of a device within an enclosure does nothing (because the intf_remove only copes with enclosure removal not with component removal). Fix this by adding a function to remove the component. Also needed to fix the prototype of enclosure_remove_device, since we know the device we've removed but not the internal component number Signed-off-by:
-
James Bottomley authored
In a situation either with expanders or with multiple enclosure devices, hot add doesn't always work. This is because we try to find a single enclosure device attached to the host. Fix this by looping over all enclosure devices attached to the host and also by making the find loop recognise that the enclosure devices may be expander remote (i.e. not parented by the host). Signed-off-by:
-
Brian King authored
ipr_cmd_label[] isn't big enough for an eight byte string plus terminator. Fix by shortening the string to seven bytes. Signed-off-by:
-
Anil Veerabhadrappa authored
When bnx2i_adapter_ready() fails, connection handle(cid) = 0 is wrongly freed because 'cid' is not yet allocated for the endpoint. Fix is to initialize bnx2i_ep->ep_iscsi_cid to '-1' in bnx2i_alloc_ep() and not in bnx2i_ep_connect() to avoid releasing invalid 'cid'. There is already a check in bnx2i_free_iscsi_cid() not to free invalid iscsi connection handle (-1) Signed-off-by:
Anil Veerabhadrappa <anilgv@broadcom.com> Signed-off-by:
-
Anil Veerabhadrappa authored
Without the fix bnx2i would fail tt->xmit_task() when link is down and libiscsi would have already incremented session->cmdsn before calling bnx2i's xmit_task() entry point and will just return the command to SCSI-ML when xmit_task() fails. libiscsi does not retract the session->cmdsn as the command was never sent on wire. It is generally good idea for LLD, bnx2i to accept the scsi cmnd/nopout and let upper layer timeout and go though normal session recovery process. When link is down, unsolicited nopout will not be accepted by bnx2i and connection will never enter recovery state. This fix is required for MPIO to work corectly Signed-off-by:
-
Vasu Dev authored
The phys_dev was used only to locate common offload EM instance for all FCoE instances on a eth devices in function fcoe_em_config, so just updated fcoe_em_config to look for actual real eth device in locating common offload EM instance and then no need to store phys_dev in fcoe_softc, so removes phys_dev from fcoe_softc also. Renames fcoe_softc real_dev to netdev and updates all its uses to use netdev. So effectively no functional change, use of single netdev instead phys_dev and real_dev saves one pointer memory in fcoe_softc, also real_dev used here was confusing with vlan driver terminology since real_dev in vlan driver is referred to physical eth device. Signed-off-by:
Vasu Dev <vasu.dev@intel.com> Signed-off-by:
Robert Love <robert.w.love@intel.com> Signed-off-by:
-
Yi Zou authored
I don't believe this check is needed any more in the current kernel, which, if I understand correctly, is for compound page where only the first page is supposed to get ref-counted. Signed-off-by:
Yi Zou <yi.zou@intel.com> Signed-off-by:
-
Yi Zou authored
FC_FRAME_SG_LEN is 4 which is too small when offload is enabled. Actually, the WARN_ON() in fc_fcp_send_data() should be: WARN_ON(skb_shinfo(fp_skb(fp))->nr_frags > MAX_SKB_FRAGS); But since we will not get anything more than 64K anyway, so there is no need to do this anyway here. Therefore, I am getting rid of FC_FRAME_SG_LEN here and the WARN_ON here. Signed-off-by:
-
Yi Zou authored
Remove the extra ifdef for NETIF_F_FSO and NETIF_F_FCOE_CRC since they are already defined in the current kernel as in include/linux/netdevice.h. Signed-off-by:
-
Vasu Dev authored
Updates fcoe_em_config to allocate a single instance of sharable offload EM for supported lp->lro_xid per eth device, and then share this EM for subsequently more lports creation on same eth device (e.g when using VLAN). Adds tiny fcoe_oem_match function for offload EM to return true for read types IO to have read IO exchanges allocated from offload shared EM. Removes fc_em_alloc_xid function completely which was needed to manage two xid ranges within a EM, this is not needed any more with allocation of separate sharable offload EM per eth device. Instead this patch adds simple xid allocation logic to manage single xid range. Adds fc_exch_em_alloc with mp->next_xid as cursor to allocate new xid from single xid range of EM, uses mp->next_xid instead removed mp->last_xid which slightly increase probability of finding empty xid on exch allocation. Removes restriction of not allowing use of xid zero along with changing two xid range change to single xid range. Makes fc_fcp_ddp_setup calling conditional to only xid allocated from shared offload EM. Signed-off-by:
-
Vasu Dev authored
Modifies fcoe_hostlist_lock uses such that a new EM allocation in fcoe_em_config and adding new fcoe_softc using fcoe_hostlist_add are atomic, this is to ensure that a shared offload EM gets allocated only once per eth device for its all lports. Signed-off-by:
-
Vasu Dev authored
Modifies current code to use EM anchor list in EM allocation, EM free, EM reset, exch allocation and exch lookup code paths. 1. Modifies fc_exch_mgr_alloc to accept EM match function and then have allocated EM added to the lport using fc_exch_mgr_add API while also updating EM kref for newly added EM. 2. Updates fc_exch_mgr_free API to accept only lport pointer instead EM and then have this API free all EMs of the lport from EM anchor list. 3. Removes single lport pointer link from the EM, which was used in associating lport pointer in newly allocated exchange. Instead have lport pointer passed along new exchange allocation call path and then store passed lport pointer in newly allocated exchange, this will allow a single EM instance to be used across more than one lport and used in EM reset to reset only lport specific exchanges. 4. Modifies fc_exch_mgr_reset to reset all EMs from the EM anchor list of the lport, adds additional exch lport pointer (ep->lp) check for shared EM case to reset exchange specific to a lport requested reset. 5. Updates exch allocation API fc_exch_alloc to use EM anchor list and its anchor match func pointer. The fc_exch_alloc will walk the list of EMs until it finds a match, a match will be either null match func pointer or call to match function returning true value. 6. Updates fc_exch_recv to accept incoming frame on local port using only lport pointer and frame pointer without specifying EM instance of incoming frame. Instead modified fc_exch_recv to locate EM for the incoming frame by matching xid of incoming frame against a EM xid range. This change was required to use EM list in libfc Rx path and after this change the lport fc_exch_mgr pointer emp is not needed anymore, so removed emp pointer. 7. Updates fnic for removed lport emp pointer and above modified libfc APIs fc_exch_recv, fc_exch_mgr_alloc and fc_exch_mgr_free. 8. Removes exch_get and exch_put from libfc_function_template as these are no longer needed with EM anchor list and its match function use. Also removes its default function fc_exch_get. A defect this patch introduced regarding the libfc initialization order in the fnic driver was fixed by Joe Eykholt <jeykholt@cisco.com>. Signed-off-by: -
Robert Love authored
Currently there is a 1:1 relationship between the lport and exchange manager. This macro takes an EM as an argument and determines the lport from it. However, later patches will use an EM list per lport, so we will no longer have this 1:1 relationship- this macro must change. The FC_EM_DBG macro is rarely used. There are four callers, two can use FC_LPORT_DBG instead and two can be removed since they're not necessary. This patch makes those changes and removes the macro. Signed-off-by:
-
Vasu Dev authored
Adds EM list using a anchor struct fc_exch_mgr_anchor, anchor is used to allow same EM instance sharing across more than one lport on a eth device, this implementation is per discussed design posted at http://www.open-fcoe.org/pipermail/devel/2009-June/002566.html. The shared EM is required for multiple lports on eth device when using multiple VLANs or NPIV. Adds fc_exch_mgr_add API to add a EM to the lport and fc_exch_mgr_del API to delete previously added EM. Also adds function fc_exch_mgr_destroy() to destroy allocated EM. The kref is added to the EM to keep track of EM usage count, the EM is destroyed when no longer in use upon kref reaching to zero. The caller can specify match function to fc_exch_mgr_add, this will be used in determining exchange allocation from its EM or not. Moved calling of fcoe_em_config below fcoe_libfc_config calling, so that list head lp->ema_list is initialized before configuring EM. Signed-off-by:
-
Joe Eykholt authored
The timer for rport retries wasn't getting canceled, and would occasionally go off after the module was unloaded. Add logic to cancel the timer in fc_rport_work(). Since we cancel the timer before deleting the rdata, it is no longer necessary to do a get_device() for the pending timer. Signed-off-by:
Joe Eykholt <jeykholt@cisco.com> Signed-off-by:
-
Joe Eykholt authored
fc_rport_logoff drops the rport lock in order to cancel work that may be pending. This is undesirable as the state can completely change, and the caller may not expect that the lock could've been dropped. If there is work pending, it will acquire the rdata mutex and so we're protected and can change the event from READY to DELETE. Queue the work only if there is no event already pending. There were a couple other cases where the state was set to DELETE and work queued, even though the state may have already been DELETE. Fix these using a common function fc_rport_enter_delete(). Signed-off-by:
-
