- 07 Jan, 2020 40 commits
-
-
Josef Bacik authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit f72ff01d ] Testing with the new fsstress uncovered a pretty nasty deadlock with lookup and snapshot deletion. Process A unlink -> final iput -> inode_tree_del -> synchronize_srcu(subvol_srcu) Process B btrfs_lookup <- srcu_read_lock() acquired here -> btrfs_iget -> find inode that has I_FREEING set -> __wait_on_freeing_inode() We're holding the srcu_read_lock() while doing the iget in order to make sure our fs root doesn't go away, and then we are waiting for the inode to finish freeing. However because the free'ing process is doing a synchronize_srcu() we deadlock. Fix this by dropping the synchronize_srcu() in inode_tree_del(). We don't need people to stop accessing the fs root at this point, we're only adding our empty root to the dead roots list. A larger much more invasive fix is forthcoming to address how we deal with fs roots, but this fixes the immediate problem. Fixes: 76dda93c ("Btrfs: add snapshot/subvolume destroy ioctl") CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Guenter Roeck authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit 6056a0f8 ] The following build warning is seen if CONFIG_PM is disabled. drivers/usb/host/xhci-pci.c:498:13: warning: unused function 'xhci_pci_shutdown' Fixes: f2c710f7 ("usb: xhci: only set D3hot for pci device") Cc: Henry Lin <henryl@nvidia.com> Cc: stable@vger.kernel.org # all stable releases with f2c710f7Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191218011911.6907-1-linux@roeck-us.netSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Faiz Abbas authored
BugLink: https://bugs.launchpad.net/bugs/1858462 commit 07bcc411 upstream. This reverts commit c894e33d. This commit aims to treat SD High speed and SDR25 as the same while setting UHS Timings in HOST_CONTROL2 which leads to failures with some SD cards in AM65x. Revert this commit. The issue this commit was trying to fix can be implemented in a platform specific callback instead of common sdhci code. Cc: <stable@vger.kernel.org> Signed-off-by:
Faiz Abbas <faiz_abbas@ti.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20191128110422.25917-1-faiz_abbas@ti.comSigned-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Russell King authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit a5d66f81 ] When a phydev is created, the speed and duplex are set to zero and -1 respectively, rather than using the predefined SPEED_UNKNOWN and DUPLEX_UNKNOWN constants. There is a window at initialisation time where we may report link down using the 0/-1 values. Tidy this up and use the predefined constants, so debug doesn't complain with: "Unsupported (update phy-core.c)/Unsupported (update phy-core.c)" when the speed and duplex settings are printed. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Hewenliang authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit 10992af6 ] It is necessary to free the memory that we have allocated when error occurs. Fixes: ef3072cd ("tools lib traceevent: Get rid of die in add_filter_type()") Signed-off-by:
Hewenliang <hewenliang4@huawei.com> Reviewed-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com> Link: http://lore.kernel.org/lkml/20191119014415.57210-1-hewenliang4@huawei.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Michael Ellerman authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit 4ee812f6 ] In the vmx crypto Makefile we assign to a variable called TARGET and pass that to the aesp8-ppc.pl and ghashp8-ppc.pl scripts. The variable is meant to describe what flavour of powerpc we're building for, eg. either 32 or 64-bit, and big or little endian. Unfortunately TARGET is a fairly common name for a make variable, and if it happens that TARGET is specified as a command line parameter to make, the value specified on the command line will override our value. In particular this can happen if the kernel Makefile is driven by an external Makefile that uses TARGET for something. This leads to weird build failures, eg: nonsense at /build/linux/drivers/crypto/vmx/ghashp8-ppc.pl line 45. /linux/drivers/crypto/vmx/Makefile:20: recipe for target 'drivers/crypto/vmx/ghashp8-ppc.S' failed Which shows that we passed an empty value for $(TARGET) to the perl script, confirmed with make V=1: perl /linux/drivers/crypto/vmx/ghashp8-ppc.pl > drivers/crypto/vmx/ghashp8-ppc.S We can avoid this confusion by using override, to tell make that we don't want anything to override our variable, even a value specified on the command line. We can also use a less common name, given the script calls it "flavour", let's use that. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Corentin Labbe authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit a7126603 ] If you try to compile this driver on a 64-bit platform then you will get warnings because it mixes size_t with unsigned int which only works on 32-bit. This patch fixes all of the warnings on sun4i-ss-hash.c. Signed-off-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by:
-
Andy Shevchenko authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit 21f58548 ] New GCC warns about inappropriate use of strncpy(): drivers/staging/fbtft/fbtft-core.c: In function ‘fbtft_framebuffer_alloc’: drivers/staging/fbtft/fbtft-core.c:665:2: warning: ‘strncpy’ specified bound 16 equals destination size [-Wstringop-truncation] 665 | strncpy(info->fix.id, dev->driver->name, 16); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Later on the copy is being used with the assumption to be NULL terminated. Make sure string is NULL terminated by switching to snprintf(). Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20191120095716.26628-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Johannes Berg authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit 5974fbb5 ] kasprintf() can fail, we should check the return value. Fixes: 5ed540ae ("iwlwifi: use mac80211 throughput trigger") Fixes: 8ca151b5 ("iwlwifi: add the MVM driver") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Omar Sandoval authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit 9be490f1 ] Currently, end_workqueue_fn() frees the end_io_wq entry (which embeds the work item) and then calls bio_endio(). This is another potential instance of the bug in "btrfs: don't prematurely free work in run_ordered_work()". In particular, the endio call may depend on other work items. For example, btrfs_end_dio_bio() can call btrfs_subio_endio_read() -> __btrfs_correct_data_nocsum() -> dio_read_error() -> submit_dio_repair_bio(), which submits a bio that is also completed through a end_workqueue_fn() work item. However, __btrfs_correct_data_nocsum() waits for the newly submitted bio to complete, thus it depends on another work item. This example currently usually works because we use different workqueue helper functions for BTRFS_WQ_ENDIO_DATA and BTRFS_WQ_ENDIO_DIO_REPAIR. However, it may deadlock with stacked filesystems and is fragile overall. The proper fix is to free the work item at the very end of the work function, so let's do that. Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Omar Sandoval <osandov@fb.com> Reviewed-by:
-
Chuhong Yuan authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit 04358e40 ] The driver misses calling clk_unprepare in probe failure and remove. Add the calls to fix it. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Link: https://lore.kernel.org/r/20191115083122.12278-1-hslester96@gmail.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Lianbo Jiang authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit 112eee5d ] Add a forward declaration of struct kimage to the crash.h header because future changes will invoke a crash-specific function from the realmode init path and the compiler will complain otherwise like this: In file included from arch/x86/realmode/init.c:11: ./arch/x86/include/asm/crash.h:5:32: warning: ‘struct kimage’ declared inside\ parameter list will not be visible outside of this definition or declaration 5 | int crash_load_segments(struct kimage *image); | ^~~~~~ ./arch/x86/include/asm/crash.h:6:37: warning: ‘struct kimage’ declared inside\ parameter list will not be visible outside of this definition or declaration 6 | int crash_copy_backup_region(struct kimage *image); | ^~~~~~ ./arch/x86/include/asm/crash.h:7:39: warning: ‘struct kimage’ declared inside\ parameter list will not be visible outside of this definition or declaration 7 | int crash_setup_memmap_entries(struct kimage *image, | [ bp: Rewrite the commit message. ] Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Lianbo Jiang <lijiang@redhat.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: bhe@redhat.com Cc: d.hatayama@fujitsu.com Cc: dhowells@redhat.com Cc: dyoung@redhat.com Cc: ebiederm@xmission.com Cc: horms@verge.net.au Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jürgen Gross <jgross@suse.com> Cc: kexec@lists.infradead.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: vgoyal@redhat.com Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20191108090027.11082-4-lijiang@redhat.com Link: https://lkml.kernel.org/r/201910310233.EJRtTMWP%25lkp@intel.comSigned-off-by:
-
Viresh Kumar authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit 46770be0 ] The cpufreq core heavily depends on the availability of the struct device for CPUs and if they aren't available at the time cpufreq driver is registered, we will never succeed in making cpufreq work. This happens due to following sequence of events: - cpufreq_register_driver() - subsys_interface_register() - return 0; //successful registration of driver ... at a later point of time - register_cpu(); - device_register(); - bus_probe_device(); - sif->add_dev(); - cpufreq_add_dev(); - get_cpu_device(); //FAILS - per_cpu(cpu_sys_devices, num) = &cpu->dev; //used by get_cpu_device() - return 0; //CPU registered successfully Because the per-cpu variable cpu_sys_devices is set only after the CPU device is regsitered, cpufreq will never be able to get it when cpufreq_add_dev() is called. This patch avoids this failure by making sure device structure of at least CPU0 is available when the cpufreq driver is registered, else return -EPROBE_DEFER. Reported-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Co-developed-by:
Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Tested-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Sudip Mukherjee authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit 231ec2f2 ] Usually all the distro will load the parport low level driver as part of their initialization. But we can get into a situation where all the parallel port drivers are built as module and we unload all the modules at a later time. Then if we just do "modprobe parport" it will only load the parport module and will not load the low level driver which will actually register the ports. So, check the bus if there is any parport registered, if not, load the low level driver. We can get into the above situation with all distro but only Suse has setup the alias for "parport_lowlevel" and so it only works in Suse. Users of Debian based distro will need to load the lowlevel module manually. Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lore.kernel.org/r/20191016144540.18810-3-sudipm.mukherjee@gmail.comSigned-off-by:
-
Ben Zhang authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit eabf424f ] The codec dies when RT5677_PWR_ANLG2(MX-64h) is set to 0xACE1 while it's streaming audio over SPI. The DSP firmware turns on PLL2 (MX-64 bit 8) when SPI streaming starts. However regmap does not believe that register can change by itself. When BST1 (bit 15) is turned on with regmap_update_bits(), it doesn't read the register first before write, so PLL2 power bit is cleared by accident. Marking MX-64h as volatile in regmap solved the issue. Signed-off-by:
Ben Zhang <benzh@chromium.org> Signed-off-by:
Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20191106011335.223061-6-cujomalainey@chromium.orgSigned-off-by:
-
Chuhong Yuan authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit 5eb263ef ] pxa2xx_spi_init_pdata misses checks for devm_clk_get and platform_get_irq. Add checks for them to fix the bugs. Since ssp->clk and ssp->irq are used in probe, they are mandatory here. So we cannot use _optional() for devm_clk_get and platform_get_irq. Signed-off-by:
-
Robert Richter authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit 7088e29e ] The current code to convert a physical address mask to a grain (defined as granularity in bytes) is: e->grain = ~(mem_err->physical_addr_mask & ~PAGE_MASK); This is broken in several ways: 1) It calculates to wrong grain values. E.g., a physical address mask of ~0xfff should give a grain of 0x1000. Without considering PAGE_MASK, there is an off-by-one. Things are worse when also filtering it with ~PAGE_MASK. This will calculate to a grain with the upper bits set. In the example it even calculates to ~0. 2) The grain does not depend on and is unrelated to the kernel's page-size. The page-size only matters when unmapping memory in memory_failure(). Smaller grains are wrongly rounded up to the page-size, on architectures with a configurable page-size (e.g. arm64) this could round up to the even bigger page-size of the hypervisor. Fix this with: e->grain = ~mem_err->physical_addr_mask + 1; The grain_bits are defined as: grain = 1 << grain_bits; Change also the grain_bits calculation accordingly, it is the same formula as in edac_mc.c now and the code can be unified. The value in ->physical_addr_mask coming from firmware is assumed to be contiguous, but this is not sanity-checked. However, in case the mask is non-contiguous, a conversion to grain_bits effectively converts the grain bit mask to a power of 2 by rounding it up. Suggested-by:
James Morse <james.morse@arm.com> Signed-off-by:
Robert Richter <rrichter@marvell.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20191106093239.25517-11-rrichter@marvell.comSigned-off-by:
-
Chuhong Yuan authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit 2df200ab ] The driver misses calling v4l2_ctrl_handler_free and v4l2_device_unregister in remove like what is done in probe failure. Add the calls to fix it. Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by:
-
Mike Isely authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit 7f404ae9 ] In some device configurations there's no radio or radio support in the driver. That's OK, as the driver sets itself up accordingly. However on tear-down in these caes it's still trying to tear down radio related context when there isn't anything there, leading to dereferences through a null pointer and chaos follows. How this bug survived unfixed for 11 years in the pvrusb2 driver is a mystery to me. [hverkuil: fix two checkpatch warnings] Signed-off-by:
Mike Isely <isely@pobox.com> Signed-off-by:
-
Miaoqing Pan authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit 05a11003 ] ath10k does not provide transmit rate info per MSDU in tx completion, mark that as -1 so mac80211 will ignore the rates. This fixes mac80211 update Mesh link metric with invalid transmit rate info. Tested HW: QCA9984 Tested FW: 10.4-3.9.0.2-00035 Signed-off-by:
Hou Bao Hou <houbao@codeaurora.org> Signed-off-by:
Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by:
Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Masami Hiramatsu authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit da6cb952 ] Filter out instances except for inlined_subroutine and subprogram DIE in die_walk_instances() and die_is_func_instance(). This fixes an issue that perf probe sets some probes on calling address instead of a target function itself. When perf probe walks on instances of an abstruct origin (a kind of function prototype of inlined function), die_walk_instances() can also pass a GNU_call_site (a GNU extension for call site) to callback. Since it is not an inlined instance of target function, we have to filter out when searching a probe point. Without this patch, perf probe sets probes on call site address too.This can happen on some function which is marked "inlined", but has actual symbol. (I'm not sure why GCC mark it "inlined"): # perf probe -D vfs_read p:probe/vfs_read _text+2500017 p:probe/vfs_read_1 _text+2499468 p:probe/vfs_read_2 _text+2499563 p:probe/vfs_read_3 _text+2498876 p:probe/vfs_read_4 _text+2498512 p:probe/vfs_read_5 _text+2498627 With this patch: Slightly different results, similar tho: # perf probe -D vfs_read p:probe/vfs_read _text+2498512 Committer testing: # uname -a Linux quaco 5.3.8-200.fc30.x86_64 #1 SMP Tue Oct 29 14:46:22 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux Before: # perf probe -D vfs_read p:probe/vfs_read _text+3131557 p:probe/vfs_read_1 _text+3130975 p:probe/vfs_read_2 _text+3131047 p:probe/vfs_read_3 _text+3130380 p:probe/vfs_read_4 _text+3130000 # uname -a Linux quaco 5.3.8-200.fc30.x86_64 #1 SMP Tue Oct 29 14:46:22 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux # After: # perf probe -D vfs_read p:probe/vfs_read _text+3130000 # Fixes: db0d2c64 ("perf probe: Search concrete out-of-line instances") Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Tested-by:
-
Masami Hiramatsu authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit f4d99bdf ] Skip end-of-sequence and non-statement lines while walking through lines list. The "end-of-sequence" line information means: "the current address is that of the first byte after the end of a sequence of target machine instructions." (DWARF version 4 spec 6.2.2) This actually means out of scope and we can not probe on it. On the other hand, the statement lines (is_stmt) means: "the current instruction is a recommended breakpoint location. A recommended breakpoint location is intended to “represent” a line, a statement and/or a semantically distinct subpart of a statement." (DWARF version 4 spec 6.2.2) So, non-statement line info also should be skipped. These can reduce unneeded probe points and also avoid an error. E.g. without this patch: # perf probe -a "clear_tasks_mm_cpumask:1" Added new events: probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask:1) probe:clear_tasks_mm_cpumask_1 (on clear_tasks_mm_cpumask:1) probe:clear_tasks_mm_cpumask_2 (on clear_tasks_mm_cpumask:1) probe:clear_tasks_mm_cpumask_3 (on clear_tasks_mm_cpumask:1) probe:clear_tasks_mm_cpumask_4 (on clear_tasks_mm_cpumask:1) You can now use it in all perf tools, such as: perf record -e probe:clear_tasks_mm_cpumask_4 -aR sleep 1 # This puts 5 probes on one line, but acutally it's not inlined function. This is because there are many non statement instructions at the function prologue. With this patch: # perf probe -a "clear_tasks_mm_cpumask:1" Added new event: probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask:1) You can now use it in all perf tools, such as: perf record -e probe:clear_tasks_mm_cpumask -aR sleep 1 # Now perf-probe skips unneeded addresses. Committer testing: Slightly different results, but similar: Before: # uname -a Linux quaco 5.3.8-200.fc30.x86_64 #1 SMP Tue Oct 29 14:46:22 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux # # perf probe -a "clear_tasks_mm_cpumask:1" Added new events: probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask:1) probe:clear_tasks_mm_cpumask_1 (on clear_tasks_mm_cpumask:1) probe:clear_tasks_mm_cpumask_2 (on clear_tasks_mm_cpumask:1) You can now use it in all perf tools, such as: perf record -e probe:clear_tasks_mm_cpumask_2 -aR sleep 1 # After: # perf probe -a "clear_tasks_mm_cpumask:1" Added new event: probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask:1) You can now use it in all perf tools, such as: perf record -e probe:clear_tasks_mm_cpumask -aR sleep 1 # perf probe -l probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask@kernel/cpu.c) # Fixes: 4cc9cec6 ("perf probe: Introduce lines walker interface") Signed-off-by:
-
Masami Hiramatsu authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit 86c0bf85 ] Fix to show calling lines of inlined functions (where an inline function is called). die_walk_lines() filtered out the lines inside inlined functions based on the address. However this also filtered out the lines which call those inlined functions from the target function. To solve this issue, check the call_file and call_line attributes and do not filter out if it matches to the line information. Without this fix, perf probe -L doesn't show some lines correctly. (don't see the lines after 17) # perf probe -L vfs_read <vfs_read@/home/mhiramat/ksrc/linux/fs/read_write.c:0> 0 ssize_t vfs_read(struct file *file, char __user *buf, size_t count, loff_t *pos) 1 { 2 ssize_t ret; 4 if (!(file->f_mode & FMODE_READ)) return -EBADF; 6 if (!(file->f_mode & FMODE_CAN_READ)) return -EINVAL; 8 if (unlikely(!access_ok(buf, count))) return -EFAULT; 11 ret = rw_verify_area(READ, file, pos, count); 12 if (!ret) { 13 if (count > MAX_RW_COUNT) count = MAX_RW_COUNT; 15 ret = __vfs_read(file, buf, count, pos); 16 if (ret > 0) { fsnotify_access(file); add_rchar(current, ret); } With this fix: # perf probe -L vfs_read <vfs_read@/home/mhiramat/ksrc/linux/fs/read_write.c:0> 0 ssize_t vfs_read(struct file *file, char __user *buf, size_t count, loff_t *pos) 1 { 2 ssize_t ret; 4 if (!(file->f_mode & FMODE_READ)) return -EBADF; 6 if (!(file->f_mode & FMODE_CAN_READ)) return -EINVAL; 8 if (unlikely(!access_ok(buf, count))) return -EFAULT; 11 ret = rw_verify_area(READ, file, pos, count); 12 if (!ret) { 13 if (count > MAX_RW_COUNT) count = MAX_RW_COUNT; 15 ret = __vfs_read(file, buf, count, pos); 16 if (ret > 0) { 17 fsnotify_access(file); 18 add_rchar(current, ret); } 20 inc_syscr(current); } Fixes: 4cc9cec6 ("perf probe: Introduce lines walker interface") Signed-off-by:
-
Masami Hiramatsu authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit c701636a ] Make find_best_scope() returns innermost DIE at given address if there is no best matched scope DIE. Since Gcc sometimes generates intuitively strange line info which is out of inlined function address range, we need this fixup. Without this, sometimes perf probe failed to probe on a line inside an inlined function: # perf probe -D ksys_open:3 Failed to find scope of probe point. Error: Failed to add events. With this fix, 'perf probe' can probe it: # perf probe -D ksys_open:3 p:probe/ksys_open _text+25707308 p:probe/ksys_open_1 _text+25710596 p:probe/ksys_open_2 _text+25711114 p:probe/ksys_open_3 _text+25711343 p:probe/ksys_open_4 _text+25714058 p:probe/ksys_open_5 _text+2819653 p:probe/ksys_open_6 _text+2819701 Signed-off-by:
-
Masami Hiramatsu authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit dee36a2a ] Since debuginfo__find_probes() callback function can be called with the location which already passed, the callback function must filter out such overlapped locations. add_probe_trace_event() has already done it by commit 1a375ae7 ("perf probe: Skip same probe address for a given line"), but add_available_vars() doesn't. Thus perf probe -v shows same address repeatedly as below: # perf probe -V vfs_read:18 Available variables at vfs_read:18 @<vfs_read+217> char* buf loff_t* pos ssize_t ret struct file* file @<vfs_read+217> char* buf loff_t* pos ssize_t ret struct file* file @<vfs_read+226> char* buf loff_t* pos ssize_t ret struct file* file With this fix, perf probe -V shows it correctly: # perf probe -V vfs_read:18 Available variables at vfs_read:18 @<vfs_read+217> char* buf loff_t* pos ssize_t ret struct file* file @<vfs_read+226> char* buf loff_t* pos ssize_t ret struct file* file Fixes: cf6eb489 ("perf probe: Show accessible local variables") Signed-off-by:
-
Masami Hiramatsu authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit 18e21eb6 ] Fix 'perf probe --line' option to show inlined function callsite lines even if the function DIE has only ranges. Without this: # perf probe -L amd_put_event_constraints ... 2 { 3 if (amd_has_nb(cpuc) && amd_is_nb_event(&event->hw)) __amd_put_nb_event_constraints(cpuc, event); 5 } With this patch: # perf probe -L amd_put_event_constraints ... 2 { 3 if (amd_has_nb(cpuc) && amd_is_nb_event(&event->hw)) 4 __amd_put_nb_event_constraints(cpuc, event); 5 } Committer testing: Before: [root@quaco ~]# perf probe -L amd_put_event_constraints <amd_put_event_constraints@/usr/src/debug/kernel-5.2.fc30/linux-5.2.18-200.fc30.x86_64/arch/x86/events/amd/core.c:0> 0 static void amd_put_event_constraints(struct cpu_hw_events *cpuc, struct perf_event *event) 2 { 3 if (amd_has_nb(cpuc) && amd_is_nb_event(&event->hw)) __amd_put_nb_event_constraints(cpuc, event); 5 } PMU_FORMAT_ATTR(event, "config:0-7,32-35"); PMU_FORMAT_ATTR(umask, "config:8-15" ); [root@quaco ~]# After: [root@quaco ~]# perf probe -L amd_put_event_constraints <amd_put_event_constraints@/usr/src/debug/kernel-5.2.fc30/linux-5.2.18-200.fc30.x86_64/arch/x86/events/amd/core.c:0> 0 static void amd_put_event_constraints(struct cpu_hw_events *cpuc, struct perf_event *event) 2 { 3 if (amd_has_nb(cpuc) && amd_is_nb_event(&event->hw)) 4 __amd_put_nb_event_constraints(cpuc, event); 5 } PMU_FORMAT_ATTR(event, "config:0-7,32-35"); PMU_FORMAT_ATTR(umask, "config:8-15" ); [root@quaco ~]# perf probe amd_put_event_constraints:4 Added new event: probe:amd_put_event_constraints (on amd_put_event_constraints:4) You can now use it in all perf tools, such as: perf record -e probe:amd_put_event_constraints -aR sleep 1 [root@quaco ~]# [root@quaco ~]# perf probe -l probe:amd_put_event_constraints (on amd_put_event_constraints:4@arch/x86/events/amd/core.c) probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask@kernel/cpu.c) [root@quaco ~]# Using it: [root@quaco ~]# perf trace -e probe:* ^C[root@quaco ~]# Ok, Intel system here... :-) Fixes: 4cc9cec6 ("perf probe: Introduce lines walker interface") Signed-off-by:
-
Masami Hiramatsu authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit af04dd2f ] Fix to show ranges of variables (--range and --vars option) in functions which DIE has only ranges but no entry_pc attribute. Without this fix: # perf probe --range -V clear_tasks_mm_cpumask Available variables at clear_tasks_mm_cpumask @<clear_tasks_mm_cpumask+0> (No matched variables) With this fix: # perf probe --range -V clear_tasks_mm_cpumask Available variables at clear_tasks_mm_cpumask @<clear_tasks_mm_cpumask+0> [VAL] int cpu @<clear_tasks_mm_cpumask+[0-35,317-317,2052-2059]> Committer testing: Before: [root@quaco ~]# perf probe --range -V clear_tasks_mm_cpumask Available variables at clear_tasks_mm_cpumask @<clear_tasks_mm_cpumask+0> (No matched variables) [root@quaco ~]# After: [root@quaco ~]# perf probe --range -V clear_tasks_mm_cpumask Available variables at clear_tasks_mm_cpumask @<clear_tasks_mm_cpumask+0> [VAL] int cpu @<clear_tasks_mm_cpumask+[0-23,23-105,105-106,106-106,1843-1850,1850-1862]> [root@quaco ~]# Using it: [root@quaco ~]# perf probe clear_tasks_mm_cpumask cpu Added new event: probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask with cpu) You can now use it in all perf tools, such as: perf record -e probe:clear_tasks_mm_cpumask -aR sleep 1 [root@quaco ~]# perf probe -l probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask@kernel/cpu.c with cpu) [root@quaco ~]# [root@quaco ~]# perf trace -e probe:*cpumask ^C[root@quaco ~]# Fixes: 349e8d26 ("perf probe: Add --range option to show a variable's location range") Signed-off-by:
-
Masami Hiramatsu authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit eb6933b2 ] Fix perf probe to probe an inlne function which has no entry pc or low pc but only has ranges attribute. This seems very rare case, but I could find a few examples, as same as probe_point_search_cb(), use die_entrypc() to get the entry address in probe_point_inline_cb() too. Without this patch: # perf probe -D __amd_put_nb_event_constraints Failed to get entry address of __amd_put_nb_event_constraints. Probe point '__amd_put_nb_event_constraints' not found. Error: Failed to add events. With this patch: # perf probe -D __amd_put_nb_event_constraints p:probe/__amd_put_nb_event_constraints amd_put_event_constraints+43 Committer testing: Before: [root@quaco ~]# perf probe -D __amd_put_nb_event_constraints Failed to get entry address of __amd_put_nb_event_constraints. Probe point '__amd_put_nb_event_constraints' not found. Error: Failed to add events. [root@quaco ~]# After: [root@quaco ~]# perf probe -D __amd_put_nb_event_constraints p:probe/__amd_put_nb_event_constraints _text+33789 [root@quaco ~]# Fixes: 4ea42b18 ("perf: Add perf probe subcommand, a kprobe-event setup helper") Signed-off-by:
-
Masami Hiramatsu authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit acb6a704 ] Since some inlined functions are in lexical blocks of given function, we have to recursively walk through the DIE tree. Without this fix, perf-probe -L can miss the inlined functions which is in a lexical block (like if (..) { func() } case.) However, even though, to walk the lines in a given function, we don't need to follow the children DIE of inlined functions because those do not have any lines in the specified function. We need to walk though whole trees only if we walk all lines in a given file, because an inlined function can include another inlined function in the same file. Fixes: b0e9cb28 ("perf probe: Fix to search nested inlined functions in CU") Signed-off-by:
-
Masami Hiramatsu authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit 3895534d ] Since debuginfo__find_probe_point() uses dwarf_entrypc() for finding the entry address of the function on which a probe is, it will fail when the function DIE has only ranges attribute. To fix this issue, use die_entrypc() instead of dwarf_entrypc(). Without this fix, perf probe -l shows incorrect offset: # perf probe -l probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask+18446744071579263632@work/linux/linux/kernel/cpu.c) probe:clear_tasks_mm_cpumask_1 (on clear_tasks_mm_cpumask+18446744071579263752@work/linux/linux/kernel/cpu.c) With this: # perf probe -l probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask@work/linux/linux/kernel/cpu.c) probe:clear_tasks_mm_cpumask_1 (on clear_tasks_mm_cpumask:21@work/linux/linux/kernel/cpu.c) Committer testing: Before: [root@quaco ~]# perf probe -l probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask+18446744071579765152@kernel/cpu.c) [root@quaco ~]# After: [root@quaco ~]# perf probe -l probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask@kernel/cpu.c) [root@quaco ~]# Fixes: 1d46ea2a ("perf probe: Fix listing incorrect line number with inline function") Signed-off-by:
-
Masami Hiramatsu authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit b77afa1f ] Fix die_is_func_instance() to find range-only function instance. In some case, a function instance can be made without any low PC or entry PC, but only with address ranges by optimization. (e.g. cold text partially in "text.unlikely" section) To find such function instance, we have to check the range attribute too. Fixes: e1ecbbc3 ("perf probe: Fix to handle optimized not-inlined functions") Signed-off-by:
-
Ping-Ke Shih authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit 5174f1e4 ] This leak was found by testing the EDIMAX EW-7612 on Raspberry Pi 3B+ with Linux 5.4-rc5 (multi_v7_defconfig + rtlwifi + kmemleak) and noticed a single memory leak during probe: unreferenced object 0xec13ee40 (size 176): comm "kworker/u8:1", pid 36, jiffies 4294939321 (age 5580.790s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<fc1bbb3e>] __netdev_alloc_skb+0x9c/0x164 [<863dfa6e>] rtl92c_set_fw_rsvdpagepkt+0x254/0x340 [rtl8192c_common] [<9572be0d>] rtl92cu_set_hw_reg+0xf48/0xfa4 [rtl8192cu] [<116df4d8>] rtl_op_bss_info_changed+0x234/0x96c [rtlwifi] [<8933575f>] ieee80211_bss_info_change_notify+0xb8/0x264 [mac80211] [<d4061e86>] ieee80211_assoc_success+0x934/0x1798 [mac80211] [<e55adb56>] ieee80211_rx_mgmt_assoc_resp+0x174/0x314 [mac80211] [<5974629e>] ieee80211_sta_rx_queued_mgmt+0x3f4/0x7f0 [mac80211] [<d91091c6>] ieee80211_iface_work+0x208/0x318 [mac80211] [<ac5fcae4>] process_one_work+0x22c/0x564 [<f5e6d3b6>] worker_thread+0x44/0x5d8 [<82c7b073>] kthread+0x150/0x154 [<b43e1b7d>] ret_from_fork+0x14/0x2c [<794dff30>] 0x0 It is because 8192cu doesn't implement usb_cmd_send_packet(), and this patch just frees the skb within the function to resolve memleak problem by now. Since 8192cu doesn't turn on fwctrl_lps that needs to download command packet for firmware via the function, applying this patch doesn't affect driver behavior. Reported-by:
Stefan Wahren <wahrenst@gmx.net> Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
-
Pan Bian authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit e9a8ba97 ] The channels spfi->tx_ch and spfi->rx_ch are not set to NULL after they are released. As a result, they will be released again, either on the error handling branch in the same function or in the corresponding remove function, i.e. img_spfi_remove(). This patch fixes the bug by setting the two members to NULL. Signed-off-by:
Pan Bian <bianpan2016@163.com> Link: https://lore.kernel.org/r/1573007769-20131-1-git-send-email-bianpan2016@163.comSigned-off-by:
-
Manish Chopra authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit dc5a3d79 ] PF driver doesn't enable tx-switching for all cos queues/clients, which causes packets drop from PF to VF. Fix this by enabling tx-switching on all cos queues/clients. Signed-off-by:
Manish Chopra <manishc@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Geert Uytterhoeven authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit 884caada ] The definitions for bit field [19:18] of the Peripheral Function Select Register 3 were accidentally copied from bit field [20], leading to duplicates for the TCLK1_B function, and missing TCLK0, CAN_CLK_B, and ET0_ETXD4 functions. Fix this by adding the missing GPIO_FN_CAN_CLK_B and GPIO_FN_ET0_ETXD4 enum values, and correcting the functions. Reported-by:
Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191024131308.16659-1-geert+renesas@glider.beSigned-off-by:
-
John Garry authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit 130f4caf ] With CONFIG_DEBUG_TEST_DRIVER_REMOVE set, we may find the following WARN: [ 23.452574] ------------[ cut here ]------------ [ 23.457190] WARNING: CPU: 59 PID: 1 at drivers/ata/libata-core.c:6676 ata_host_detach+0x15c/0x168 [ 23.466047] Modules linked in: [ 23.469092] CPU: 59 PID: 1 Comm: swapper/0 Not tainted 5.4.0-rc1-00010-g5b83fd27752b-dirty #296 [ 23.477776] Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0 - V1.16.01 03/15/2019 [ 23.486286] pstate: a0c00009 (NzCv daif +PAN +UAO) [ 23.491065] pc : ata_host_detach+0x15c/0x168 [ 23.495322] lr : ata_host_detach+0x88/0x168 [ 23.499491] sp : ffff800011cabb50 [ 23.502792] x29: ffff800011cabb50 x28: 0000000000000007 [ 23.508091] x27: ffff80001137f068 x26: ffff8000112c0c28 [ 23.513390] x25: 0000000000003848 x24: ffff0023ea185300 [ 23.518689] x23: 0000000000000001 x22: 00000000000014c0 [ 23.523987] x21: 0000000000013740 x20: ffff0023bdc20000 [ 23.529286] x19: 0000000000000000 x18: 0000000000000004 [ 23.534584] x17: 0000000000000001 x16: 00000000000000f0 [ 23.539883] x15: ffff0023eac13790 x14: ffff0023eb76c408 [ 23.545181] x13: 0000000000000000 x12: ffff0023eac13790 [ 23.550480] x11: ffff0023eb76c228 x10: 0000000000000000 [ 23.555779] x9 : ffff0023eac13798 x8 : 0000000040000000 [ 23.561077] x7 : 0000000000000002 x6 : 0000000000000001 [ 23.566376] x5 : 0000000000000002 x4 : 0000000000000000 [ 23.571674] x3 : ffff0023bf08a0bc x2 : 0000000000000000 [ 23.576972] x1 : 3099674201f72700 x0 : 0000000000400284 [ 23.582272] Call trace: [ 23.584706] ata_host_detach+0x15c/0x168 [ 23.588616] ata_pci_remove_one+0x10/0x18 [ 23.592615] ahci_remove_one+0x20/0x40 [ 23.596356] pci_device_remove+0x3c/0xe0 [ 23.600267] really_probe+0xdc/0x3e0 [ 23.603830] driver_probe_device+0x58/0x100 [ 23.608000] device_driver_attach+0x6c/0x90 [ 23.612169] __driver_attach+0x84/0xc8 [ 23.615908] bus_for_each_dev+0x74/0xc8 [ 23.619730] driver_attach+0x20/0x28 [ 23.623292] bus_add_driver+0x148/0x1f0 [ 23.627115] driver_register+0x60/0x110 [ 23.630938] __pci_register_driver+0x40/0x48 [ 23.635199] ahci_pci_driver_init+0x20/0x28 [ 23.639372] do_one_initcall+0x5c/0x1b0 [ 23.643199] kernel_init_freeable+0x1a4/0x24c [ 23.647546] kernel_init+0x10/0x108 [ 23.651023] ret_from_fork+0x10/0x18 [ 23.654590] ---[ end trace 634a14b675b71c13 ]--- With KASAN also enabled, we may also get many use-after-free reports. The issue is that when CONFIG_DEBUG_TEST_DRIVER_REMOVE is set, we may attempt to detach the ata_port before it has been probed. This is because the ata_ports are async probed, meaning that there is no guarantee that the ata_port has probed prior to detach. When the ata_port does probe in this scenario, we get all sorts of issues as the detach may have already happened. Fix by ensuring synchronisation with async_synchronize_full(). We could alternatively use the cookie returned from the ata_port probe async_schedule() call, but that means managing the cookie, so more complicated. Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Yunfeng Ye authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit bfcef4ab ] In cases like suspend-to-disk and suspend-to-ram, a large number of CPU cores need to be shut down. At present, the CPU hotplug operation is serialised, and the CPU cores can only be shut down one by one. In this process, if PSCI affinity_info() does not return LEVEL_OFF quickly, cpu_psci_cpu_kill() needs to wait for 10ms. If hundreds of CPU cores need to be shut down, it will take a long time. Normally, there is no need to wait 10ms in cpu_psci_cpu_kill(). So change the wait interval from 10 ms to max 1 ms and use usleep_range() instead of msleep() for more accurate timer. In addition, reducing the time interval will increase the messages output, so remove the "Retry ..." message, instead, track time and output to the the sucessful message. Signed-off-by:
Yunfeng Ye <yeyunfeng@huawei.com> Reviewed-by:
Sudeep Holla <sudeep.holla@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Thomas Gleixner authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit df439342 ] There is an issue with threaded interrupts which are marked ONESHOT and using the fasteoi handler: if (IS_ONESHOT()) mask_irq(); .... cond_unmask_eoi_irq() chip->irq_eoi(); if (setaffinity_pending) { mask_ioapic(); ... move_affinity(); unmask_ioapic(); } So if setaffinity is pending the interrupt will be moved and then unconditionally unmasked at the ioapic level, which is wrong in two aspects: 1) It should be kept masked up to the point where the threaded handler finished. 2) The physical chip state and the software masked state are inconsistent Guard both the mask and the unmask with a check for the software masked state. If the line is marked masked then the ioapic line is also masked, so both mask_ioapic() and unmask_ioapic() can be skipped safely. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Fixes: 3aa551c9 ("genirq: add threaded interrupt handler support") Link: https://lkml.kernel.org/r/20191017101938.321393687@linutronix.deSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Kangjie Lu authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit ec3b7b6e ] "clock" may be copied to "best_clock". Initializing best_clock is not sufficient. The fix initializes clock as well to avoid memory disclosures and informaiton leaks. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20191018044150.1899-1-kjlu@umn.eduSigned-off-by:
-
Mattijs Korpershoek authored
BugLink: https://bugs.launchpad.net/bugs/1858462 [ Upstream commit eb8c101e ] During the setup() stage, HCI device drivers expect the chip to acknowledge its setup() completion via vendor specific frames. If userspace opens() such HCI device in HCI_USER_CHANNEL [1] mode, the vendor specific frames are never tranmitted to the driver, as they are filtered in hci_rx_work(). Allow HCI devices which operate in HCI_USER_CHANNEL mode to receive frames if the HCI device is is HCI_INIT state. [1] https://www.spinics.net/lists/linux-bluetooth/msg37345.html Fixes: 23500189 ("Bluetooth: Introduce new HCI socket channel for user operation") Signed-off-by:
Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
