- 03 Mar, 2018 39 commits
-
-
Moshe Shemesh authored
[ Upstream commit d6b2785c ] When mlx5_stop_eqs fails to destroy any of the eqs it returns with an error. In such failure flow the function will return without releasing all EQs irqs and then pci_free_irq_vectors will fail. Fix by only warn on destroy EQ failure and continue to release other EQs and their irqs. It fixes the following kernel trace: kernel: kernel BUG at drivers/pci/msi.c:352! ... ... kernel: Call Trace: kernel: pci_disable_msix+0xd3/0x100 kernel: pci_free_irq_vectors+0xe/0x20 kernel: mlx5_load_one.isra.17+0x9f5/0xec0 [mlx5_core] Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by:
Moshe Shemesh <moshe@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Huy Nguyen authored
[ Upstream commit ff089191 ] Fix bug that allows ets bw sum to be 0% when ets tc type exists. Fixes: 08fb1dac ('net/mlx5e: Support DCBNL IEEE ETS') Signed-off-by:
Huy Nguyen <huyn@mellanox.com> Signed-off-by:
-
Fredrik Hallenberg authored
[ Upstream commit a1762456 ] As noted in dwmac4_wrback_get_rx_timestamp_status the timestamp is found in the context descriptor following the current descriptor. However the current code looks for the context descriptor in the current descriptor, which will always fail. Signed-off-by:
Fredrik Hallenberg <megahallon@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Fredrik Hallenberg authored
[ Upstream commit 200922c9 ] When using GMAC4 the value written in PTP_SSIR should be shifted however the shifted value is also used in subsequent calculations which results in a bad timestamp value. Signed-off-by:
-
Xin Long authored
[ Upstream commit c9fefa08 ] Now it's using IPV6_MIN_MTU as the min mtu in ip6_tnl_xmit, but IPV6_MIN_MTU actually only works when the inner packet is ipv6. With IPV6_MIN_MTU for ipv4 packets, the new pmtu for inner dst couldn't be set less than 1280. It would cause tx_err and the packet to be dropped when the outer dst pmtu is close to 1280. Jianlin found it by running ipv4 traffic with the topo: (client) gre6 <---> eth1 (route) eth2 <---> gre6 (server) After changing eth2 mtu to 1300, the performance became very low, or the connection was even broken. The issue also affects ip4ip6 and ip6ip6 tunnels. So if the inner packet is ipv4, 576 should be considered as the min mtu. Note that for ip4ip6 and ip6ip6 tunnels, the inner packet can only be ipv4 or ipv6, but for gre6 tunnel, it may also be ARP. This patch using 576 as the min mtu for non-ipv6 packet works for all those cases. Reported-by:
Jianlin Shi <jishi@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 2c52129a ] The same fix as the patch "ip_gre: remove the incorrect mtu limit for ipgre tap" is also needed for ip6_gre. Fixes: 61e84623 ("net: centralize net_device min/max MTU checking") Signed-off-by:
-
Xin Long authored
[ Upstream commit cfddd4c3 ] ipgre tap driver calls ether_setup(), after commit 61e84623 ("net: centralize net_device min/max MTU checking"), the range of mtu is [min_mtu, max_mtu], which is [68, 1500] by default. It causes the dev mtu of the ipgre tap device to not be greater than 1500, this limit value is not correct for ipgre tap device. Besides, it's .change_mtu already does the right check. So this patch is just to set max_mtu as 0, and leave the check to it's .change_mtu. Fixes: 61e84623 ("net: centralize net_device min/max MTU checking") Reported-by:
-
Xin Long authored
[ Upstream commit a93bf0ff ] Unlike ip tunnels, now vxlan doesn't do any pmtu update for upper dst pmtu, even if it doesn't match the lower dst pmtu any more. The problem can be reproduced when reducing the vxlan lower dev's pmtu when running netperf. In jianlin's testing, the performance went to 1/7 of the previous. This patch is to update the upper dst pmtu to match the lower dst pmtu on tx path so that packets can be sent out even when lower dev's pmtu has been changed. It also works for metadata dst. Note that this patch doesn't process any pmtu icmp packet. But even in the future, the support for pmtu icmp packets process of udp tunnels will also needs this. The same thing will be done for geneve in another patch. Signed-off-by:
-
Alexander Kochetkov authored
[ Upstream commit e688822d ] arc_emac_rx() has some issues found by code review. In case netdev_alloc_skb_ip_align() or dma_map_single() failure rx fifo entry will not be returned to EMAC. In case dma_map_single() failure previously allocated skb became lost to driver. At the same time address of newly allocated skb will not be provided to EMAC. Signed-off-by:
Alexander Kochetkov <al.kochet@gmail.com> Signed-off-by:
-
Sean Wang authored
[ Upstream commit 7352e252 ] The current solution would setup fixed and force link of 1Gbps to the both GMAC on the default. However, The GMAC should always be put to link down state when the GMAC is disabled on certain target boards. Otherwise, the driver possibly receives unexpected data from the floating hardware connection through the unused GMAC. Although the driver had been added certain protection in RX path to get rid of such kind of unexpected data sent to the upper stack. Signed-off-by:
Sean Wang <sean.wang@mediatek.com> Signed-off-by:
-
Jan Beulich authored
[ Upstream commit 2cc42bac ] A few thousand such pages are usually left around due to the re-use of L1 tables having been provided by the hypervisor (Dom0) or tool stack (DomU). Set NX in the direct map variant, which needs to be done in L2 due to the dual use of the re-used L1s. For x86_configure_nx() to actually do what it is supposed to do, call get_cpu_cap() first. This was broken by commit 4763ed4d ("x86, mm: Clean up and simplify NX enablement") when switching away from the direct EFER read. Signed-off-by:
Jan Beulich <jbeulich@suse.com> Reviewed-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
John Stultz authored
[ Upstream commit f292b9b2 ] In trying to add support for drm_hwcomposer to HiKey, I've needed to utilize the ION CMA heap, and I've noticed problems with allocations on newer kernels failing. It seems back with 204f6722 ("ion: Use CMA APIs directly"), the ion_cma_heap code was modified to use the CMA API, but kept the arguments as buffer lengths rather then number of pages. This results in errors as we don't have enough pages in CMA to satisfy the exaggerated requests. This patch converts the ion_cma_heap CMA API usage to properly request pages. It also fixes a minor issue in the allocation where in the error path, the cma_release is called with the buffer->size value which hasn't yet been set. Cc: Laura Abbott <labbott@redhat.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Archit Taneja <architt@codeaurora.org> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dmitry Shmidt <dimitrysh@google.com> Cc: Todd Kjos <tkjos@google.com> Cc: Amit Pundir <amit.pundir@linaro.org> Fixes: 204f6722 ("staging: android: ion: Use CMA APIs directly") Acked-by:
Laura Abbott <labbott@redhat.com> Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
Prateek Sood authored
[ Upstream commit 116d2f74 ] Deadlock during cgroup migration from cpu hotplug path when a task T is being moved from source to destination cgroup. kworker/0:0 cpuset_hotplug_workfn() cpuset_hotplug_update_tasks() hotplug_update_tasks_legacy() remove_tasks_in_empty_cpuset() cgroup_transfer_tasks() // stuck in iterator loop cgroup_migrate() cgroup_migrate_add_task() In cgroup_migrate_add_task() it checks for PF_EXITING flag of task T. Task T will not migrate to destination cgroup. css_task_iter_start() will keep pointing to task T in loop waiting for task T cg_list node to be removed. Task T do_exit() exit_signals() // sets PF_EXITING exit_task_namespaces() switch_task_namespaces() free_nsproxy() put_mnt_ns() drop_collected_mounts() namespace_unlock() synchronize_rcu() _synchronize_rcu_expedited() schedule_work() // on cpu0 low priority worker pool wait_event() // waiting for work item to execute Task T inserted a work item in the worklist of cpu0 low priority worker pool. It is waiting for expedited grace period work item to execute. This work item will only be executed once kworker/0:0 complete execution of cpuset_hotplug_workfn(). kworker/0:0 ==> Task T ==>kworker/0:0 In case of PF_EXITING task being migrated from source to destination cgroup, migrate next available task in source cgroup. Signed-off-by:
Prateek Sood <prsood@codeaurora.org> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Abhijeet Kumar authored
[ Upstream commit d070f7c7 ] In skylake platform, we hear a loud pop noise(0 dB) at start of audio capture power up sequence. This patch removes the pop noise from the recording by adding a delay before enabling ADC. Signed-off-by:
Abhijeet Kumar <abhijeet.kumar@intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Radu Pirea authored
[ Upstream commit 66e900a3 ] The only part of atmel_spi_remove which needs to be atomic is hardware reset. atmel_spi_stop_dma calls dma_terminate_all and this needs interrupts enabled. atmel_spi_release_dma calls dma_release_channel and dma_release_channel locks a mutex inside of spin_lock. So the call of these functions can't be inside a spin_lock. Reported-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
Radu Pirea <radu.pirea@microchip.com> Signed-off-by:
-
Jia-Ju Bai authored
[ Upstream commit 162bd5e5 ] The driver may sleep under a spinlock. The function call path is: hwsim_get_radio_nl (acquire the spinlock) nlmsg_new(GFP_KERNEL) --> may sleep To fix it, GFP_KERNEL is replaced with GFP_ATOMIC. This bug is found by my static analysis tool(DSAC) and checked by my code review. Signed-off-by:
Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Josh Poimboeuf authored
[ Upstream commit 6454b3bd ] Commit: 1959a601 ("x86/dumpstack: Pin the target stack when dumping it") changed the behavior of stack traces for zombies. Before that commit, /proc/<pid>/stack reported the last execution path of the zombie before it died: [<ffffffff8105b877>] do_exit+0x6f7/0xa80 [<ffffffff8105bc79>] do_group_exit+0x39/0xa0 [<ffffffff8105bcf0>] __wake_up_parent+0x0/0x30 [<ffffffff8152dd09>] system_call_fastpath+0x16/0x1b [<00007fd128f9c4f9>] 0x7fd128f9c4f9 [<ffffffffffffffff>] 0xffffffffffffffff After the commit, it just reports an empty stack trace. The new behavior is actually probably more correct. If the stack refcount has gone down to zero, then the task has already gone through do_exit() and isn't going to run anymore. The stack could be freed at any time and is basically gone, so reporting an empty stack makes sense. However, save_stack_trace_tsk_reliable() treats such a missing stack condition as an error. That can cause livepatch transition stalls if there are any unreaped zombies. Instead, just treat it as a reliable, empty stack. Reported-and-tested-by:
Miroslav Benes <mbenes@suse.cz> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Fixes: af085d90 ("stacktrace/x86: add function for detecting reliable stack traces") Link: http://lkml.kernel.org/r/e4b09e630e99d0c1080528f0821fc9d9dbaeea82.1513631620.git.jpoimboe@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Herbert Xu authored
[ Upstream commit acf568ee ] This is an old bugbear of mine: https://www.mail-archive.com/netdev@vger.kernel.org/msg03894.html By crafting special packets, it is possible to cause recursion in our kernel when processing transport-mode packets at levels that are only limited by packet size. The easiest one is with DNAT, but an even worse one is where UDP encapsulation is used in which case you just have to insert an UDP encapsulation header in between each level of recursion. This patch avoids this problem by reinjecting tranport-mode packets through a tasklet. Fixes: b05e1066 ("[IPV4/6]: Netfilter IPsec input hooks") Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Karol Herbst authored
[ Upstream commit a121027d ] On my GP107 when I load nouveau after unloading it, for some reason the GPU stopped sending or the CPU stopped receiving interrupts if MSI was enabled. Doing a rearm once before getting any interrupts fixes this. Signed-off-by:
Karol Herbst <kherbst@redhat.com> Reviewed-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Alexey Khoroshilov authored
[ Upstream commit ab144360 ] There are several error paths in xgene_mdio_probe(), where clk is left undisabled. The patch fixes them. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Al Viro authored
[ Upstream commit 9ee332d9 ] Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Xin Long authored
[ Upstream commit 5c468674 ] Now when reneging events in sctp_ulpq_renege(), the variable freed could be increased by a __u16 value twice while freed is of __u16 type. It means freed may overflow at the second addition. This patch is to fix it by using __u32 type for 'freed', while at it, also to remove 'if (chunk)' check, as all renege commands are generated in sctp_eat_data and it can't be NULL. Reported-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
[ Upstream commit ca26cffa ] Up to f5caf621 ("x86/asm: Fix inline asm call constraints for Clang") we were able to use x86 headers to build to the 'bpf' clang target, as done by the BPF code in tools/perf/. With that commit, we ended up with following failure for 'perf test LLVM', this is because "clang ... -target bpf ..." fails since 4.0 does not have bpf inline asm support and 6.0 does not recognize the register 'esp', fix it by guarding that part with an #ifndef __BPF__, that is defined by clang when building to the "bpf" target. # perf test -v LLVM 37: LLVM search and compile : 37.1: Basic BPF llvm compile : --- start --- test child forked, pid 25526 Kernel build dir is set to /lib/modules/4.14.0+/build set env: KBUILD_DIR=/lib/modules/4.14.0+/build unset env: KBUILD_OPTS include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/7/include -I/home/acme/git/linux/arch/x86/include -I./arch/x86/include/generated -I/home/acme/git/linux/include -I./include -I/home/acme/git/linux/arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -I./include/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h set env: NR_CPUS=4 set env: LINUX_VERSION_CODE=0x40e00 set env: CLANG_EXEC=/usr/local/bin/clang set env: CLANG_OPTIONS=-xc set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/7/include -I/home/acme/git/linux/arch/x86/include -I./arch/x86/include/generated -I/home/acme/git/linux/include -I./include -I/home/acme/git/linux/arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -I./include/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h set env: WORKING_DIR=/lib/modules/4.14.0+/build set env: CLANG_SOURCE=- llvm compiling command template: echo '/* * bpf-script-example.c * Test basic LLVM building */ #ifndef LINUX_VERSION_CODE # error Need LINUX_VERSION_CODE # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig' #endif #define BPF_ANY 0 #define BPF_MAP_TYPE_ARRAY 2 #define BPF_FUNC_map_lookup_elem 1 #define BPF_FUNC_map_update_elem 2 static void *(*bpf_map_lookup_elem)(void *map, void *key) = (void *) BPF_FUNC_map_lookup_elem; static void *(*bpf_map_update_elem)(void *map, void *key, void *value, int flags) = (void *) BPF_FUNC_map_update_elem; struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; }; #define SEC(NAME) __attribute__((section(NAME), used)) struct bpf_map_def SEC("maps") flip_table = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(int), .value_size = sizeof(int), .max_entries = 1, }; SEC("func=SyS_epoll_wait") int bpf_func__SyS_epoll_wait(void *ctx) { int ind =0; int *flag = bpf_map_lookup_elem(&flip_table, &ind); int new_flag; if (!flag) return 0; /* flip flag and store back */ new_flag = !*flag; bpf_map_update_elem(&flip_table, &ind, &new_flag, BPF_ANY); return new_flag; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o - test child finished with 0 ---- end ---- LLVM search and compile subtest 0: Ok 37.2: kbuild searching : --- start --- test child forked, pid 25950 Kernel build dir is set to /lib/modules/4.14.0+/build set env: KBUILD_DIR=/lib/modules/4.14.0+/build unset env: KBUILD_OPTS include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/7/include -I/home/acme/git/linux/arch/x86/include -I./arch/x86/include/generated -I/home/acme/git/linux/include -I./include -I/home/acme/git/linux/arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -I./include/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h set env: NR_CPUS=4 set env: LINUX_VERSION_CODE=0x40e00 set env: CLANG_EXEC=/usr/local/bin/clang set env: CLANG_OPTIONS=-xc set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/7/include -I/home/acme/git/linux/arch/x86/include -I./arch/x86/include/generated -I/home/acme/git/linux/include -I./include -I/home/acme/git/linux/arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -I./include/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h set env: WORKING_DIR=/lib/modules/4.14.0+/build set env: CLANG_SOURCE=- llvm compiling command template: echo '/* * bpf-script-test-kbuild.c * Test include from kernel header */ #ifndef LINUX_VERSION_CODE # error Need LINUX_VERSION_CODE # error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig' #endif #define SEC(NAME) __attribute__((section(NAME), used)) #include <uapi/linux/fs.h> #include <uapi/asm/ptrace.h> SEC("func=vfs_llseek") int bpf_func__vfs_llseek(void *ctx) { return 0; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; ' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o - In file included from <stdin>:12: In file included from /home/acme/git/linux/arch/x86/include/uapi/asm/ptrace.h:5: In file included from /home/acme/git/linux/include/linux/compiler.h:242: In file included from /home/acme/git/linux/arch/x86/include/asm/barrier.h:5: In file included from /home/acme/git/linux/arch/x86/include/asm/alternative.h:10: /home/acme/git/linux/arch/x86/include/asm/asm.h:145:50: error: unknown register name 'esp' in asm register unsigned long current_stack_pointer asm(_ASM_SP); ^ /home/acme/git/linux/arch/x86/include/asm/asm.h:44:18: note: expanded from macro '_ASM_SP' #define _ASM_SP __ASM_REG(sp) ^ /home/acme/git/linux/arch/x86/include/asm/asm.h:27:32: note: expanded from macro '__ASM_REG' #define __ASM_REG(reg) __ASM_SEL_RAW(e##reg, r##reg) ^ /home/acme/git/linux/arch/x86/include/asm/asm.h:18:29: note: expanded from macro '__ASM_SEL_RAW' # define __ASM_SEL_RAW(a,b) __ASM_FORM_RAW(a) ^ /home/acme/git/linux/arch/x86/include/asm/asm.h:11:32: note: expanded from macro '__ASM_FORM_RAW' # define __ASM_FORM_RAW(x) #x ^ <scratch space>:4:1: note: expanded from here "esp" ^ 1 error generated. ERROR: unable to compile - Hint: Check error message shown above. Hint: You can also pre-compile it into .o using: clang -target bpf -O2 -c - with proper -I and -D options. Failed to compile test case: 'kbuild searching' test child finished with -1 ---- end ---- LLVM search and compile subtest 1: FAILED! Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wang Nan <wangnan0@huawei.com> Cc: Yonghong Song <yhs@fb.com> Link: https://lkml.kernel.org/r/20171128175948.GL3298@kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Chunyan Zhang authored
[ Upstream commit 36b0cb84 ] An additional 'ip' will be pushed to the stack, for restoring the DACR later, if CONFIG_CPU_SW_DOMAIN_PAN defined. However, the fixup still get the err_ptr by add #8*4 to sp, which results in the fact that the code area pointed by the LR will be overwritten, or the kernel will crash if CONFIG_DEBUG_RODATA is enabled. This patch fixes the stack mismatch. Fixes: a5e090ac ("ARM: software-based priviledged-no-access support") Signed-off-by:
Lvqiang Huang <Lvqiang.Huang@spreadtrum.com> Signed-off-by:
Chunyan Zhang <zhang.lyra@gmail.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
John David Anglin authored
[ Upstream commit da57c541 ] In testing, I found that the thread stack can be 16 kB when using an irq stack. Without it, the thread stack needs to be 32 kB. Currently, the irq stack is 32 kB. While it probably could be 16 kB, I would prefer to leave it as is for safety. Signed-off-by:
John David Anglin <dave.anglin@bell.net> Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Brendan McGrath authored
[ Upstream commit 588753f1 ] One example of when an ICMPv6 packet is required to be looped back is when a host acts as both a Multicast Listener and a Multicast Router. A Multicast Router will listen on address ff02::16 for MLDv2 messages. Currently, MLDv2 messages originating from a Multicast Listener running on the same host as the Multicast Router are not being delivered to the Multicast Router. This is due to dst.input being assigned the default value of dst_discard. This results in the packet being looped back but discarded before being delivered to the Multicast Router. This patch sets dst.input to ip6_input to ensure a looped back packet is delivered to the Multicast Router. Signed-off-by:
Brendan McGrath <redmcg@redmandi.dyndns.org> Signed-off-by:
-
Albert Hsieh authored
[ Upstream commit e44b9a9c ] A negative return value of brcmstb_nand_verify_erased_page() indicates a real bitflip error of an erased page, and other return values (>= 0) show the corrected bitflip number. Zero return value means no bitflip, but the current driver code treats it as an error, and eventually leads to falsely reported ECC error. Fixes: 02b88eea ("mtd: brcmnand: Add check for erased page bitflip") Signed-off-by:
Albert Hsieh <wen.hsieh@broadcom.com> Acked-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Sascha Hauer authored
[ Upstream commit fdf2e821 ] When erased subpages are read then the BCH decoder returns STATUS_ERASED if they are all empty, or STATUS_UNCORRECTABLE if there are bitflips. When there are bitflips, we have to set these bits again to show the upper layers a completely erased page. When a bitflip happens in the exact byte where the bad block marker is, then this byte is swapped with another byte in block_mark_swapping(). The correction code then detects a bitflip in another subpage and no longer corrects the bitflip where it really happens. Correct this behaviour by calling block_mark_swapping() after the bitflips have been corrected. In our case UBIFS failed with this bug because it expects erased pages to be really empty: UBIFS error (pid 187): ubifs_scan: corrupt empty space at LEB 36:118735 UBIFS error (pid 187): ubifs_scanned_corruption: corruption at LEB 36:118735 UBIFS error (pid 187): ubifs_scanned_corruption: first 8192 bytes from LEB 36:118735 UBIFS error (pid 187): ubifs_scan: LEB 36 scanning failed UBIFS error (pid 187): do_commit: commit failed, error -117 Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by:
-
Daniele Palmas authored
[ Upstream commit c647c0d6 ] This patch adds support for Telit ME910 PID 0x1101. Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Igor Russkikh authored
[ Upstream commit 1e366161 ] Systems with large MRRS on device (2K, 4K) with high data rates and/or large MTU, atlantic observes DMA packet buffer overflow. On some systems that causes PCIe transaction errors, hardware NMIs or datapath freeze. This patch 1) Limits MRRS from device side to 2K (thats maximum our hardware supports) 2) Limit maximum size of outstanding TX DMA data read requests. This makes hardware buffers running fine. Signed-off-by:
Pavel Belous <pavel.belous@aquantia.com> Signed-off-by:
Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by:
-
Igor Russkikh authored
[ Upstream commit e4d02ca0 ] Different hardware device Ids correspond to different maximum speed available. Extra checks were added for devices D108 and D109 to remove unsupported speeds from these device capabilities list. Signed-off-by:
-
Keith Busch authored
[ Upstream commit 249159c5 ] Some devices with IDs matching the "stripe" quirk don't actually have this quirk, and don't have an MDTS value. When MDTS is not set, the driver sets the max sectors to UINT_MAX, which is not a power of 2, hitting a BUG_ON from blk_queue_chunk_sectors. This patch skips setting chunk sectors for such devices. Signed-off-by:
Keith Busch <keith.busch@intel.com> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
James Smart authored
[ Upstream commit 4596e752 ] There are two put references in the failure case of initial create_association. The first put actually frees the controller, thus the second put references freed memory. Remove the unnecessary 2nd put. Signed-off-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
-
Arvind Yadav authored
[ Upstream commit e796cc6a ] The platform_get_irq_byname() function returns negative if an error occurs. zero or positive number on success. platform_get_irq_byname() error checking for zero is not correct. Fixes: 6d6ce40f ("phy: cpcap-usb: Add CPCAP PMIC USB support") Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by:
Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
Andreas Platschek authored
[ Upstream commit 2610acf4 ] Previously enabled clks are only disabled if clk_prepare_enable() fails. However, there are other error paths were the previously enabled clocks are not disabled. To fix the problem, fsl_disable_clocks() now takes the number of clocks that shall be disabled + unprepared. For existing calls were all clocks were already successfully prepared + enabled, DMAMUX_NR is passed to disable + unprepare all clocks. In error paths were only some clocks were successfully prepared + enabled the loop counter is passed, in order to disable + unprepare all successfully prepared + enabled clocks. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Andreas Platschek <andreas.platschek@opentech.at> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Prasad B Munirathnam authored
[ Upstream commit 5771cfff ] "FIB_CONTEXT_FLAG_TIMEDOUT" flag is set in aac_eh_abort to indicate command timeout. Using the same flag in reset handler causes the command to time out and the I/Os were dropped. Define a new flag "FIB_CONTEXT_FLAG_EH_RESET" to make sure I/O is properly handled in eh_reset handler. [mkp: tweaked commit message] Signed-off-by:
Prasad B Munirathnam <prasad.munirathnam@microsemi.com> Reviewed-by:
Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 1f704fd0 ] A semaphore is acquired before this check, so we must release it before leaving. Link: http://lkml.kernel.org/r/20171211211009.4971-1-christophe.jaillet@wanadoo.fr Fixes: b7f0554a ("mm: fail get_vaddr_frames() for filesystem-dax mappings") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Sterba <dsterba@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 3756f640 ] gcc-8 warns about using strncpy() with the source size as the limit: fs/exec.c:1223:32: error: argument to 'sizeof' in 'strncpy' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess] This is indeed slightly suspicious, as it protects us from source arguments without NUL-termination, but does not guarantee that the destination is terminated. This keeps the strncpy() to ensure we have properly padded target buffer, but ensures that we use the correct length, by passing the actual length of the destination buffer as well as adding a build-time check to ensure it is exactly TASK_COMM_LEN. There are only 23 callsites which I all reviewed to ensure this is currently the case. We could get away with doing only the check or passing the right length, but it doesn't hurt to do both. Link: http://lkml.kernel.org/r/20171205151724.1764896-1-arnd@arndb.deSigned-off-by:
Arnd Bergmann <arnd@arndb.de> Suggested-by:
Kees Cook <keescook@chromium.org> Acked-by:
-
Anna-Maria Gleixner authored
commit 48d0c9be upstream. The POSIX specification defines that relative CLOCK_REALTIME timers are not affected by clock modifications. Those timers have to use CLOCK_MONOTONIC to ensure POSIX compliance. The introduction of the additional HRTIMER_MODE_PINNED mode broke this requirement for pinned timers. There is no user space visible impact because user space timers are not using pinned mode, but for consistency reasons this needs to be fixed. Check whether the mode has the HRTIMER_MODE_REL bit set instead of comparing with HRTIMER_MODE_ABS. Signed-off-by:
Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: Christoph Hellwig <hch@lst.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: keescook@chromium.org Fixes: 597d0275 ("timers: Framework for identifying pinned timers") Link: http://lkml.kernel.org/r/20171221104205.7269-7-anna-maria@linutronix.deSigned-off-by:
-
- 28 Feb, 2018 1 commit
-
-
Greg Kroah-Hartman authored
-
