Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-18-82913fc0fb87@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-17-82913fc0fb87@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-16-82913fc0fb87@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-15-82913fc0fb87@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-14-82913fc0fb87@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use iio_get_masklength() to access '.masklength' so it can be annotated
as __private when there are no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: João Paulo Gonçalves <jpaulo.silvagoncalves@gmail.com>
Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-13-82913fc0fb87@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use iio_get_masklength() to access '.masklength' so it can be annotated
as __private when there are no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-12-82913fc0fb87@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-11-82913fc0fb87@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-10-82913fc0fb87@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use iio_get_masklength() to access '.masklength' so it can be annotated
as __private when there are no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-9-82913fc0fb87@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use iio_get_masklength() to access '.masklength' so it can be annotated
as __private when there are no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-8-82913fc0fb87@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-7-82913fc0fb87@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-6-82913fc0fb87@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-5-82913fc0fb87@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-4-82913fc0fb87@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-3-82913fc0fb87@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-2-82913fc0fb87@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use iio_get_masklength() to access '.masklength' so it can be annotated
as __private when there are no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-1-82913fc0fb87@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This fixes the spelling in IIO_BACKEND_INTERNAL_CONTINUOUS_WAVE.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240726-iio-backend-spelling-continuous-v1-1-467c6e3f78ff@baylibre.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Move ABI documentation for custom shunt resistor attributes into the
generic iio documentation file. Exception for pac1934: leave it
untouched since it does not comply with common iio ABI generalization.
Signed-off-by: Matteo Martelli <matteomartelli3@gmail.com>
Link: https://patch.msgid.link/20240722-iio-pac1921-v3-2-05dc9916cb33@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Don't populate the read-only array conversion_time_max on the stack at
run time, instead make it static.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20240722151738.572913-1-colin.i.king@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add support for BH1745, which is an I2C colour sensor with red, green,
blue and clear channels. It has a programmable active low interrupt
pin. Interrupt occurs when the signal from the selected interrupt
source channel crosses set interrupt threshold high or low level.

Interrupt source for the device can be configured by enabling the
corresponding event. Interrupt latch is always enabled when setting
up interrupt.

Add myself as the maintainer for this driver in MAINTAINERS.
Signed-off-by: Mudit Sharma <muditsharma.info@gmail.com>
Reviewed-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20240718220208.331942-2-muditsharma.info@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add ROHM BH1745 - 4 channel I2C colour sensor's dt-bindings.
Signed-off-by: Mudit Sharma <muditsharma.info@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240718220208.331942-1-muditsharma.info@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240718-dev-iio-masklength-private2-v1-22-8e12cd042906@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240718-dev-iio-masklength-private2-v1-21-8e12cd042906@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240718-dev-iio-masklength-private2-v1-20-8e12cd042906@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240718-dev-iio-masklength-private2-v1-19-8e12cd042906@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use iio_get_masklength() to access '.masklength' so it can be annotated
as __private when there are no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240718-dev-iio-masklength-private2-v1-18-8e12cd042906@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240718-dev-iio-masklength-private2-v1-17-8e12cd042906@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240718-dev-iio-masklength-private2-v1-16-8e12cd042906@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Make use of iio_get_masklength) and iio_for_each_active_channel() to
access '.masklength' so it can be annotated as __private when there
are no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240718-dev-iio-masklength-private2-v1-15-8e12cd042906@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240718-dev-iio-masklength-private2-v1-14-8e12cd042906@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240718-dev-iio-masklength-private2-v1-13-8e12cd042906@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240718-dev-iio-masklength-private2-v1-12-8e12cd042906@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240718-dev-iio-masklength-private2-v1-11-8e12cd042906@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use iio_get_masklength() to access '.masklength' so it can be annotated
as __private when there are no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240718-dev-iio-masklength-private2-v1-10-8e12cd042906@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240718-dev-iio-masklength-private2-v1-9-8e12cd042906@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240718-dev-iio-masklength-private2-v1-8-8e12cd042906@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use iio_for_each_active_channel() to iterate over active channels
accessing '.masklength' so it can be annotated as __private when there are
no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240718-dev-iio-masklength-private2-v1-7-8e12cd042906@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use iio_get_masklength() to access '.masklength' so it can be annotated
as __private when there are no more direct users of it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240718-dev-iio-masklength-private2-v1-6-8e12cd042906@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>