I got a NULL pointer dereference report when doing fuzz test:

Call Trace:
  qp_release_pages+0xae/0x130
  qp_host_unregister_user_memory.isra.25+0x2d/0x80
  vmci_qp_broker_unmap+0x191/0x320
  ? vmci_host_do_alloc_queuepair.isra.9+0x1c0/0x1c0
  vmci_host_unlocked_ioctl+0x59f/0xd50
  ? do_vfs_ioctl+0x14b/0xa10
  ? tomoyo_file_ioctl+0x28/0x30
  ? vmci_host_do_alloc_queuepair.isra.9+0x1c0/0x1c0
  __x64_sys_ioctl+0xea/0x120
  do_syscall_64+0x34/0xb0
  entry_SYSCALL_64_after_hwframe+0x44/0xae

When a queue pair is created by the following call, it will not
register the user memory if the page_store is NULL, and the
entry->state will be set to VMCIQPB_CREATED_NO_MEM.

vmci_host_unlocked_ioctl
  vmci_host_do_alloc_queuepair
    vmci_qp_broker_alloc
      qp_broker_alloc
        qp_broker_create // set entry->state = VMCIQPB_CREATED_NO_MEM;

When unmapping this queue pair, qp_host_unregister_user_memory() will
be called to unregister the non-existent user memory, which will
result in a null pointer reference. It will also change
VMCIQPB_CREATED_NO_MEM to VMCIQPB_CREATED_MEM, which should not be
present in this operation.

Only when the qp broker has mem, it can unregister the user
memory when unmapping the qp broker.

Only when the qp broker has no mem, it can register the user
memory when mapping the qp broker.

Fixes: 06164d2b ("VMCI: queue pairs implementation.")
Cc: stable <stable@vger.kernel.org>
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20210818124845.488312-1-wanghai38@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unneeded variables when "0" can be returned.

Generated by: scripts/coccinelle/misc/returnvar.cocci
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: jing yangyang <jing.yangyang@zte.com.cn>
Link: https://lore.kernel.org/r/20210820021752.10927-1-jing.yangyang@zte.com.cnSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The check for count appears to be incorrect since a non-zero count
check occurs a couple of statements earlier. Currently the check is
always false and the dev->port->irq != PARPORT_IRQ_NONE part of the
check is never tested and the if statement is dead-code. Fix this
by removing the check on count.

Note that this code is pre-git history, so I can't find a sha for
it.
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Logically dead code")
Link: https://lore.kernel.org/r/20210730100710.27405-1-colin.king@canonical.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'soundwire-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next

Vinod writes:

soundwire updates for 5.15-rc1

- Core has updates to support SoundWire mockup device (includes tag from
  asoc), improved error handling and slave status.

- Drivers has update on Intel driver for new quriks and better handling of
  errors and suspend routines

* tag 'soundwire-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
  soundwire: cadence: do not extend reset delay
  soundwire: intel: conditionally exit clock stop mode on system suspend
  soundwire: intel: skip suspend/resume/wake when link was not started
  soundwire: intel: fix potential race condition during power down
  soundwire: cadence: override PDI configurations to create loopback
  soundwire: cadence: add debugfs interface for PDI loopbacks
  soundwire: stream: don't program mockup device ports
  soundwire: bus: squelch error returned by mockup devices
  soundwire: add flag to ignore all command/control for mockup devices
  soundwire: stream: don't abort bank switch on Command_Ignored/-ENODATA
  soundwire: cadence: add paranoid check on self-clearing bits
  soundwire: dmi-quirks: add quirk for Intel 'Bishop County' NUC M15
  soundwire: bus: update Slave status in sdw_clear_slave_status
  soundwire: cadence: Remove ret variable from sdw_cdns_irq()
  soundwire: bus: filter out more -EDATA errors on clock stop
  soundwire: dmi-quirks: add ull suffix for SoundWire _ADR values
  ASoC: Intel: boards: sof_sdw: add SoundWire mockup codecs for tests
  ASoC: soc-acpi: tgl: add table for SoundWire mockup devices
  ASoC: soc-acpi: cnl: add table for SoundWire mockup devices
  ASoC: codecs: add SoundWire mockup device support

Merge tag 'phy-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next

Vinod writes:

phy-for-5.15

  - Updates:
        - Yaml conversion for Freescale imx8mq usb phy, TI AM654 SERDES phy,
          Cadence torrent phy
        - Updates for Amlogic Meson8b-usb2 phy, Samsung ufs phy

  - New support:
        - UFS phy for Qualcomm SM6115
	- PCIe & USB/DP phy for Qualcomm sc8180x
	- USB3 PHY support for Qualcomm IPQ6018
	- Renesas USB2.0 PHY for RZ/G2L

* tag 'phy-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (45 commits)
  phy: qcom-qmp: Add support for SM6115 UFS phy
  dt-bindings: phy: qcom,qmp: Add SM6115 UFS PHY bindings
  phy: qmp: Provide unique clock names for DP clocks
  phy: xilinx: zynqmp: skip PHY initialization and PLL lock for USB
  phy: amlogic: meson8b-usb2: don't log an error on -EPROBE_DEFER
  phy: amlogic: meson8b-usb2: Power off the PHY by putting it into reset mode
  phy: phy-mtk-mipi-dsi: convert to devm_platform_ioremap_resource
  phy: phy-mtk-mipi-dsi: remove dummy assignment of error number
  phy: phy-mtk-hdmi: convert to devm_platform_ioremap_resource
  phy: phy-mtk-ufs: use clock bulk to get clocks
  phy: phy-mtk-tphy: remove error log of ioremap failure
  phy: phy-mtk-tphy: print error log using child device
  phy: phy-mtk-tphy: support type switch by pericfg
  phy: phy-mtk-tphy: use clock bulk to get clocks
  dt-bindings: phy: mediatek: tphy: support type switch by pericfg
  phy: cadence-torrent: Check PIPE mode PHY status to be ready for operation
  phy: cadence-torrent: Add debug information for PHY configuration
  phy: cadence-torrent: Add separate functions for reusable code
  phy: cadence-torrent: Add PHY configuration for DP with 100MHz ref clock
  phy: cadence-torrent: Add PHY registers for DP in array format
  ...

Merge tag 'icc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next

Georgi writes:

interconnect changes for 5.15

Here are changes for the 5.15-rc1 merge window consisting of interconnect
core and driver updates.

Framework change:
- Add sanity check to detect if node is already added to provider.

Driver changes:
- RPMh drivers probe function consolidation
- Add driver for SC8180x platforms
- Add support for SC8180x OSM L3
- Use driver-specific naming in OSM L3
Signed-off-by: Georgi Djakov <djakov@kernel.org>

* tag 'icc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
  interconnect: qcom: osm-l3: Use driver-specific naming
  interconnect: qcom: osm-l3: Add sc8180x support
  dt-bindings: interconnect: Add SC8180x to OSM L3 DT binding
  interconnect: qcom: Add SC8180x providers
  dt-bindings: interconnect: Add Qualcomm SC8180x DT bindings
  interconnect: Sanity check that node isn't already on list
  interconnect: qcom: icc-rpmh: Consolidate probe functions

We need the char/misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The duration of the hw_reset is defined as 4096 cycles. The Cadence IP
allows for an additional delay which doesn't seem necessary in
practice: the actual reset sequence duration is defined by the sync_go
mechanism, not by the IP itself.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210818030130.17113-1-yung-chuan.liao@linux.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Intel stress tests reported issues with the clock stop mode,
specifically when trying to do a system suspend while the link is
already pm_runtime suspended.

In this case, we need to disable the shim wake, but when the PCI
parent device is also pm_runtime suspended the SHIM registers are not
accessible.

Since this is an invalid corner case, this patch suggests a pm_runtime
resume of the entire bus to full power (parent+child devices) before
the system suspend so that the shim wake can be disabled.

Unlike the suspend operation, the .prepare callbacks are propagated
from root device to leaf devices. By adding a .prepare callback at the
SoundWire link level, we can double-check the pm_runtime status of the
device as well as its parent PCI device. When the problematic
configuration is detected, the device is pm_runtime resumed - which by
construction also resume its parent.

An additional loop is added to resume all child devices. In theory we
only need to restart the link, but doing so will also cause the
physical devices to synchronize and re-initialize, while their Linux
devices remain pm_runtime suspended. It's simpler to make sure the
codec devices are fully resumed so that we don't have to deal with
zombie states.

This additional loop could have been avoided by adding a .prepare
callback in SoundWire codec drivers. Functionally this would have been
equivalent. The rationale for implementing a loop at the link level is
only to reduce the amount of code required to deal at the codec level
with an Intel corner case - in other words keep codec drivers
independent from Intel platform-specific programming sequences.

BugLink: https://github.com/thesofproject/linux/issues/2606Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210818024954.16873-4-yung-chuan.liao@linux.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The SoundWire Linux devices are created purely based on information
provided by platform firmware (e.g. ACPI DSDT table). When the kernel
finds a matching driver for the device address (_ADR), the probe will
initialize required data structures and initialize pm ops.

When the SoundWire link is started at a later point, the physical
devices will synchronize on the SoundWire frames and report their
attachment status, thereby triggering the enumeration and
initialization of device registers.

This two-step solution was a conscious design decision to allow e.g. a
driver to use sideband mechanisms to turn power rails on. This can
also allow OEMs to describe multiple platforms with the same DSDT
table, the devices that are not physically present in hardware.

The drawback of this approach is a bit of confusion, with more devices
than are actually present in hardware. This results in 'ghost'
devices, for which the driver successfully probes, but that will not
generate any traffic on the bus. suspend-resume transitions are
handled by drivers, and skipped when the devices are not physically
present.

This patch provides a work-around for a second-level of confusion in
platform firmware: some platforms only use HDaudio links, but
nevertheless expose SoundWire 'ghost' devices. This results in error
messages in the Intel driver while trying to suspend/resume these
links. The simplest solution is to add a boolean status flag to skip
all suspend/resume/wake sequences if the link was never started.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210818024954.16873-3-yung-chuan.liao@linux.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The power down sequence sets the link_up flag as false outside of the
mutex_lock. This is potentially unsafe.

In additional the flow in that sequence can be improved by first
testing if the link was powered, setting the link_up flag as false and
proceeding with the power down. In case the CPA bits cannot be
cleared, we only flag an error since we cannot deal with interrupts
any longer.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210818024954.16873-2-yung-chuan.liao@linux.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add the tables and constants for init sequences for UFS QMP phy found in
SM4250/6115 SoC. The phy is a variation of the v2 phy, but is mistakenly
labeled as v3-660 in downstream sources.

QSERDES COM, RX, TX registers match fully existing v2 registers, with
a few additions. PCS registers don't have much in common, but there are
no clashes with existing ones so new registers were added to existing v2
PCS pack.
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Link: https://lore.kernel.org/r/20210821155657.893165-3-iskren.chernev@gmail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add the compatible strings for the UFS PHY found on SM4250/6115 SoC.
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210821155657.893165-2-iskren.chernev@gmail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Pull powerpc fixes from Michael Ellerman:

 - Fix random crashes on some 32-bit CPUs by adding isync() after
   locking/unlocking KUEP

 - Fix intermittent crashes when loading modules with strict module RWX

 - Fix a section mismatch introduce by a previous fix.

Thanks to Christophe Leroy, Fabiano Rosas, Laurent Vivier, Murilo
Opsfelder Araújo, Nathan Chancellor, and Stan Johnson.

h# -----BEGIN PGP SIGNATURE-----

* tag 'powerpc-5.14-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm: Fix set_memory_*() against concurrent accesses
  powerpc/32s: Fix random crashes by adding isync() after locking/unlocking KUEP
  powerpc/xive: Do not mark xive_request_ipi() as __init

Pull clk driver fixes from Stephen Boyd:

 - Make the regulator state match the GDSC power domain state at boot on
   Qualcomm SoCs so that the regulator isn't turned off inadvertently.

 - Fix earlycon on i.MX6Q SoCs

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: qcom: gdsc: Ensure regulator init state matches GDSC state
  clk: imx6q: fix uart earlycon unwork

Pull char/misc driver fixes from Greg KH:
 "Here are some small driver fixes for 5.14-rc7.

  They consist of:

   - revert for an interconnect patch that was found to have problems

   - ipack tpci200 driver fixes for reported problems

   - slimbus messaging and ngd fixes for reported problems

  All are small and have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  ipack: tpci200: fix memory leak in the tpci200_register
  ipack: tpci200: fix many double free issues in tpci200_pci_probe
  slimbus: ngd: reset dma setup during runtime pm
  slimbus: ngd: set correct device for pm
  slimbus: messaging: check for valid transaction id
  slimbus: messaging: start transaction ids from 1 instead of zero
  Revert "interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate"

Pull USB fix from Greg KH:
 "Here is a single USB typec tcpm fix for a reported problem for
  5.14-rc7. It showed up in 5.13 and resolves an issue that Hans found.
  It has been in linux-next this week with no reported problems"

* tag 'usb-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: typec: tcpm: Fix VDMs sometimes not being forwarded to alt-mode drivers

Pull RISC-V fixes from Palmer Dabbelt:

 - fix the sifive-l2-cache device tree bindings for json-schema
   compatibility. This does not change the intended behavior of the
   binding.

 - avoid improperly freeing necessary resources during early boot.

* tag 'riscv-for-linus-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Fix a number of free'd resources in init_resources()
  dt-bindings: sifive-l2-cache: Fix 'select' matching

Pull s390 fix from Vasily Gorbik:

 - fix use after free of zpci_dev in pci code

* tag 's390-5.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/pci: fix use after free of zpci_dev

Pull mandatory file locking deprecation warning from Jeff Layton:
 "As discussed on the list, this patch just adds a new warning for folks
  who still have mandatory locking enabled and actually mount with '-o
  mand'. I'd like to get this in for v5.14 so we can push this out into
  stable kernels and hopefully reach folks who have mounts with -o mand.

  For now, I'm operating under the assumption that we'll fully remove
  this support in v5.15, but we can move that out if any legitimate
  users of this facility speak up between now and then"

* tag 'locks-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
  fs: warn about impending deprecation of mandatory locks

Pull block fixes from Jens Axboe:
 "Three fixes from Ming Lei that should go into 5.14:

   - Fix for a kernel panic when iterating over tags for some cases
     where a flush request is present, a regression in this cycle.

   - Request timeout fix

   - Fix flush request checking"

* tag 'block-5.14-2021-08-20' of git://git.kernel.dk/linux-block:
  blk-mq: fix is_flush_rq
  blk-mq: fix kernel panic during iterating over flush request
  blk-mq: don't grab rq's refcount in blk_mq_check_expired()

Pull io_uring fixes from Jens Axboe:
 "A few small fixes that should go into this release:

   - Fix never re-assigning an initial error value for io_uring_enter()
     for SQPOLL, if asked to do nothing

   - Fix xa_alloc_cycle() return value checking, for cases where we have
     wrapped around

   - Fix for a ctx pin issue introduced in this cycle (Pavel)"

* tag 'io_uring-5.14-2021-08-20' of git://git.kernel.dk/linux-block:
  io_uring: fix xa_alloc_cycle() error return value check
  io_uring: pin ctx on fallback execution
  io_uring: only assign io_uring_enter() SQPOLL error in actual error case

We've had CONFIG_MANDATORY_FILE_LOCKING since 2015 and a lot of distros
have disabled it. Warn the stragglers that still use "-o mand" that
we'll be dropping support for that mount option.

Cc: stable@vger.kernel.org
Signed-off-by: Jeff Layton <jlayton@kernel.org>

We currently check for ret != 0 to indicate error, but '1' is a valid
return and just indicates that the allocation succeeded with a wrap.
Correct the check to be for < 0, like it was before the xarray
conversion.

Cc: stable@vger.kernel.org
Fixes: 61cf9370 ("io_uring: Convert personality_idr to XArray")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull ACPI fixes from Rafael Wysocki:
 "These fix two mistakes in new code.

  Specifics:

   - Prevent confusing messages from being printed if the PRMT table is
     not present or there are no PRM modules (Aubrey Li).

   - Fix the handling of suspend-to-idle entry and exit in the case when
     the Microsoft UUID is used with the Low-Power S0 Idle _DSM
     interface (Mario Limonciello)"

* tag 'acpi-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: PM: s2idle: Invert Microsoft UUID entry and exit
  ACPI: PRM: Deal with table not present or no module found

Pull power management fixes from Rafael Wysocki:
 "These fix some issues in the ARM cpufreq drivers and in the operating
  performance points (OPP) framework.

  Specifics:

   - Fix useless WARN() in the OPP core and prevent a noisy warning
     from being printed by OPP _put functions (Dmitry Osipenko).

   - Fix error path when allocation failed in the arm_scmi cpufreq
     driver (Lukasz Luba).

   - Blacklist Qualcomm sc8180x and Qualcomm sm8150 in
     cpufreq-dt-platdev (Bjorn Andersson, Thara Gopinath).

   - Forbid cpufreq for 1.2 GHz variant in the armada-37xx cpufreq
     driver (Marek Behún)"

* tag 'pm-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  opp: Drop empty-table checks from _put functions
  cpufreq: armada-37xx: forbid cpufreq for 1.2 GHz variant
  cpufreq: blocklist Qualcomm sm8150 in cpufreq-dt-platdev
  cpufreq: arm_scmi: Fix error path when allocation failed
  opp: remove WARN when no valid OPPs remain
  cpufreq: blacklist Qualcomm sc8180x in cpufreq-dt-platdev

Merge misc fixes from Andrew Morton:
 "10 patches.

  Subsystems affected by this patch series: MAINTAINERS and mm (shmem,
  pagealloc, tracing, memcg, memory-failure, vmscan, kfence, and
  hugetlb)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  hugetlb: don't pass page cache pages to restore_reserve_on_error
  kfence: fix is_kfence_address() for addresses below KFENCE_POOL_SIZE
  mm: vmscan: fix missing psi annotation for node_reclaim()
  mm/hwpoison: retry with shake_page() for unhandlable pages
  mm: memcontrol: fix occasional OOMs due to proportional memory.low reclaim
  MAINTAINERS: update ClangBuiltLinux IRC chat
  mmflags.h: add missing __GFP_ZEROTAGS and __GFP_SKIP_KASAN_POISON names
  mm/page_alloc: don't corrupt pcppage_migratetype
  Revert "mm: swap: check if swap backing device is congested or not"
  Revert "mm/shmem: fix shmem_swapin() race with swapoff"

Pull drm fixes from Dave Airlie:
 "Regularly scheduled fixes. The ttm one solves a problem of GPU drivers
  failing to load if debugfs is off in Kconfig, otherwise the i915 and
  mediatek, and amdgpu fixes all fairly normal.

  Nouveau has a couple of display fixes, but it has a fix for a
  longstanding race condition in it's memory manager code, and the fix
  mostly removes some code that wasn't working properly and has no
  userspace users. This fix makes the diffstat kinda larger but in a
  good (negative line-count) way.

  core:
   - fix drm_wait_vblank uapi copying bug

  ttm:
   - fix debugfs init when debugfs is off

  amdgpu:
   - vega10 SMU workload fix
   - DCN VM fix
   - DCN 3.01 watermark fix

  amdkfd:
   - SVM fix

  nouveau:
   - ampere display fixes
   - remove MM misfeature to fix a longstanding race condition

  i915:
   - tweaked display workaround for all PCHs
   - eDP MSO pipe sanity for ADL-P fix
   - remove unused symbol export

  mediatek:
   - AAL output size setting
   - Delete component in remove function"

* tag 'drm-fixes-2021-08-20-3' of git://anongit.freedesktop.org/drm/drm:
  drm/amd/display: Use DCN30 watermark calc for DCN301
  drm/i915/dp: remove superfluous EXPORT_SYMBOL()
  drm/i915/edp: fix eDP MSO pipe sanity checks for ADL-P
  drm/i915: Tweaked Wa_14010685332 for all PCHs
  drm/nouveau: rip out nvkm_client.super
  drm/nouveau: block a bunch of classes from userspace
  drm/nouveau/fifo/nv50-: rip out dma channels
  drm/nouveau/kms/nv50: workaround EFI GOP window channel format differences
  drm/nouveau/disp: power down unused DP links during init
  drm/nouveau: recognise GA107
  drm: Copy drm_wait_vblank to user before returning
  drm/amd/display: Ensure DCN save after VM setup
  drm/amdkfd: fix random KFDSVMRangeTest.SetGetAttributesTest test failure
  drm/amd/pm: change the workload type for some cards
  Revert "drm/amd/pm: fix workload mismatch on vega10"
  drm: ttm: Don't bail from ttm_global_init if debugfs_create_dir fails
  drm/mediatek: Add component_del in OVL and COLOR remove function
  drm/mediatek: Add AAL output size configuration

Pull PCI fixes from Bjorn Helgaas:

 - Add Rahul Tanwar as Intel LGM Gateway PCIe maintainer (Rahul Tanwar)

 - Add Jim Quinlan et al as Broadcom STB PCIe maintainers (Jim Quinlan)

 - Increase D3hot-to-D0 delay for AMD Renoir/Cezanne XHCI (Marcin
   Bachry)

 - Correct iomem_get_mapping() usage for legacy_mem sysfs (Krzysztof
   Wilczyński)

* tag 'pci-v5.14-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI/sysfs: Use correct variable for the legacy_mem sysfs object
  PCI: Increase D3 delay for AMD Renoir/Cezanne XHCI
  MAINTAINERS: Add Jim Quinlan et al as Broadcom STB PCIe maintainers
  MAINTAINERS: Add Rahul Tanwar as Intel LGM Gateway PCIe maintainer

Pull MMC host fixes from Ulf Hansson:

 - dw_mmc: Fix hang on data CRC error

 - mmci: Fix voltage switch procedure for the stm32 variant

 - sdhci-iproc: Fix some clock issues for BCM2711

 - sdhci-msm: Fixup software timeout value

* tag 'mmc-v5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-iproc: Set SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN on BCM2711
  mmc: sdhci-iproc: Cap min clock frequency on BCM2711
  mmc: sdhci-msm: Update the software timeout value for sdhc
  mmc: mmci: stm32: Check when the voltage switch procedure should be done
  mmc: dw_mmc: Fix hang on data CRC error

Pull more sound fixes from Takashi Iwai:
 "This is a quick follow up for 5.14: a fix for a very recently
  introduced regression on ASoC Intel Atom driver, and another trivial
  HD-audio quirk for HP laptops"

* tag 'sound-5.14-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: intel: atom: Fix breakage for PCM buffer address setup
  ALSA: hda/realtek: Limit mic boost on HP ProBook 445 G8

Pull arm64 fixes from Will Deacon:

 - Fix cleaning of vDSO directories

 - Ensure CNTHCTL_EL2 is fully initialised when booting at EL2

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: initialize all of CNTHCTL_EL2
  arm64: clean vdso & vdso32 files

* acpi-pm:
  ACPI: PM: s2idle: Invert Microsoft UUID entry and exit

Pull iommu fixes from Joerg Roedel:

 - Fix for a potential NULL-ptr dereference in IOMMU core code

 - Two resource leak fixes

 - Cache flush fix in the Intel VT-d driver

* tag 'iommu-fixes-v5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Fix incomplete cache flush in intel_pasid_tear_down_entry()
  iommu/vt-d: Fix PASID reference leak
  iommu: Check if group is NULL before remove device
  iommu/dma: Fix leak in non-contiguous API

* pm-opp:
  opp: Drop empty-table checks from _put functions
  opp: remove WARN when no valid OPPs remain

syzbot hit kernel BUG at fs/hugetlbfs/inode.c:532 as described in [1].
This BUG triggers if the HPageRestoreReserve flag is set on a page in
the page cache.  It should never be set, as the routine
huge_add_to_page_cache explicitly clears the flag after adding a page to
the cache.

The only code other than huge page allocation which sets the flag is
restore_reserve_on_error.  It will potentially set the flag in rare out
of memory conditions.  syzbot was injecting errors to cause memory
allocation errors which exercised this specific path.

The code in restore_reserve_on_error is doing the right thing.  However,
there are instances where pages in the page cache were being passed to
restore_reserve_on_error.  This is incorrect, as once a page goes into
the cache reservation information will not be modified for the page
until it is removed from the cache.  Error paths do not remove pages
from the cache, so even in the case of error, the page will remain in
the cache and no reservation adjustment is needed.

Modify routines that potentially call restore_reserve_on_error with a
page cache page to no longer do so.

Note on fixes tag: Prior to commit 846be085 ("mm/hugetlb: expand
restore_reserve_on_error functionality") the routine would not process
page cache pages because the HPageRestoreReserve flag is not set on such
pages.  Therefore, this issue could not be trigggered.  The code added
by commit 846be085 ("mm/hugetlb: expand restore_reserve_on_error
functionality") is needed and correct.  It exposed incorrect calls to
restore_reserve_on_error which is the root cause addressed by this
commit.

[1] https://lore.kernel.org/linux-mm/00000000000050776d05c9b7c7f0@google.com/

Link: https://lkml.kernel.org/r/20210818213304.37038-1-mike.kravetz@oracle.com
Fixes: 846be085 ("mm/hugetlb: expand restore_reserve_on_error functionality")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: <syzbot+67654e51e54455f1c585@syzkaller.appspotmail.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Originally the addr != NULL check was meant to take care of the case
where __kfence_pool == NULL (KFENCE is disabled).  However, this does
not work for addresses where addr > 0 && addr < KFENCE_POOL_SIZE.

This can be the case on NULL-deref where addr > 0 && addr < PAGE_SIZE or
any other faulting access with addr < KFENCE_POOL_SIZE.  While the
kernel would likely crash, the stack traces and report might be
confusing due to double faults upon KFENCE's attempt to unprotect such
an address.

Fix it by just checking that __kfence_pool != NULL instead.

Link: https://lkml.kernel.org/r/20210818130300.2482437-1-elver@google.com
Fixes: 0ce20dd8 ("mm: add Kernel Electric-Fence infrastructure")
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Acked-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>    [5.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In a debugging session the other day, Rik noticed that node_reclaim()
was missing memstall annotations.  This means we'll miss pressure and
lost productivity resulting from reclaim on an overloaded local NUMA
node when vm.zone_reclaim_mode is enabled.

There haven't been any reports, but that's likely because
vm.zone_reclaim_mode hasn't been a commonly used feature recently, and
the intersection between such setups and psi users is probably nil.

But secondary memory such as CXL-connected DIMMS, persistent memory etc,
and the page demotion patches that handle them
(https://lore.kernel.org/lkml/20210401183216.443C4443@viggo.jf.intel.com/)
could soon make this a more common codepath again.

Link: https://lkml.kernel.org/r/20210818152457.35846-1-hannes@cmpxchg.orgSigned-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

HWPoisonHandlable() sometimes returns false for typical user pages due
to races with average memory events like transfers over LRU lists.  This
causes failures in hwpoison handling.

There's retry code for such a case but does not work because the retry
loop reaches the retry limit too quickly before the page settles down to
handlable state.  Let get_any_page() call shake_page() to fix it.

[naoya.horiguchi@nec.com: get_any_page(): return -EIO when retry limit reached]
  Link: https://lkml.kernel.org/r/20210819001958.2365157-1-naoya.horiguchi@linux.dev

Link: https://lkml.kernel.org/r/20210817053703.2267588-1-naoya.horiguchi@linux.dev
Fixes: 25182f05 ("mm,hwpoison: fix race with hugetlb page allocation")
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reported-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>		[5.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>