- 28 Jan, 2023 5 commits
-
-
Magnus Karlsson authored
Make sure that xdp_do_flush() is always executed before napi_complete_done(). This is important for two reasons. First, a redirect to an XSKMAP assumes that a call to xdp_do_redirect() from napi context X on CPU Y will be followed by a xdp_do_flush() from the same napi context and CPU. This is not guaranteed if the napi_complete_done() is executed before xdp_do_flush(), as it tells the napi logic that it is fine to schedule napi context X on another CPU. Details from a production system triggering this bug using the veth driver can be found following the first link below. The second reason is that the XDP_REDIRECT logic in itself relies on being inside a single NAPI instance through to the xdp_do_flush() call for RCU protection of all in-kernel data structures. Details can be found in the second link below. Fixes: d678be1d ("dpaa2-eth: add XDP_REDIRECT support") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com Link: https://lore.kernel.org/all/20210624160609.292325-1-toke@redhat.com/Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Magnus Karlsson authored
Make sure that xdp_do_flush() is always executed before napi_complete_done(). This is important for two reasons. First, a redirect to an XSKMAP assumes that a call to xdp_do_redirect() from napi context X on CPU Y will be followed by a xdp_do_flush() from the same napi context and CPU. This is not guaranteed if the napi_complete_done() is executed before xdp_do_flush(), as it tells the napi logic that it is fine to schedule napi context X on another CPU. Details from a production system triggering this bug using the veth driver can be found following the first link below. The second reason is that the XDP_REDIRECT logic in itself relies on being inside a single NAPI instance through to the xdp_do_flush() call for RCU protection of all in-kernel data structures. Details can be found in the second link below. Fixes: a1e031ff ("dpaa_eth: add XDP_REDIRECT support") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com Link: https://lore.kernel.org/all/20210624160609.292325-1-toke@redhat.com/Acked-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Magnus Karlsson authored
Make sure that xdp_do_flush() is always executed before napi_complete_done(). This is important for two reasons. First, a redirect to an XSKMAP assumes that a call to xdp_do_redirect() from napi context X on CPU Y will be followed by a xdp_do_flush() from the same napi context and CPU. This is not guaranteed if the napi_complete_done() is executed before xdp_do_flush(), as it tells the napi logic that it is fine to schedule napi context X on another CPU. Details from a production system triggering this bug using the veth driver can be found following the first link below. The second reason is that the XDP_REDIRECT logic in itself relies on being inside a single NAPI instance through to the xdp_do_flush() call for RCU protection of all in-kernel data structures. Details can be found in the second link below. Fixes: 186b3c99 ("virtio-net: support XDP_REDIRECT") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com Link: https://lore.kernel.org/all/20210624160609.292325-1-toke@redhat.com/Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Magnus Karlsson authored
Make sure that xdp_do_flush() is always executed before napi_complete_done(). This is important for two reasons. First, a redirect to an XSKMAP assumes that a call to xdp_do_redirect() from napi context X on CPU Y will be followed by a xdp_do_flush() from the same napi context and CPU. This is not guaranteed if the napi_complete_done() is executed before xdp_do_flush(), as it tells the napi logic that it is fine to schedule napi context X on another CPU. Details from a production system triggering this bug using the veth driver can be found following the first link below. The second reason is that the XDP_REDIRECT logic in itself relies on being inside a single NAPI instance through to the xdp_do_flush() call for RCU protection of all in-kernel data structures. Details can be found in the second link below. Fixes: a825b611 ("net: lan966x: Add support for XDP_REDIRECT") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Steen Hegelund <Steen.Hegelund@microchip.com> Link: https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com Link: https://lore.kernel.org/all/20210624160609.292325-1-toke@redhat.com/Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Magnus Karlsson authored
Make sure that xdp_do_flush() is always executed before napi_complete_done(). This is important for two reasons. First, a redirect to an XSKMAP assumes that a call to xdp_do_redirect() from napi context X on CPU Y will be followed by a xdp_do_flush() from the same napi context and CPU. This is not guaranteed if the napi_complete_done() is executed before xdp_do_flush(), as it tells the napi logic that it is fine to schedule napi context X on another CPU. Details from a production system triggering this bug using the veth driver can be found following the first link below. The second reason is that the XDP_REDIRECT logic in itself relies on being inside a single NAPI instance through to the xdp_do_flush() call for RCU protection of all in-kernel data structures. Details can be found in the second link below. Fixes: d1b25b79 ("qede: add .ndo_xdp_xmit() and XDP_REDIRECT support") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com Link: https://lore.kernel.org/all/20210624160609.292325-1-toke@redhat.com/Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 26 Jan, 2023 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from netfilter. Current release - regressions: - sched: sch_taprio: do not schedule in taprio_reset() Previous releases - regressions: - core: fix UaF in netns ops registration error path - ipv4: prevent potential spectre v1 gadgets - ipv6: fix reachability confirmation with proxy_ndp - netfilter: fix for the set rbtree - eth: fec: use page_pool_put_full_page when freeing rx buffers - eth: iavf: fix temporary deadlock and failure to set MAC address Previous releases - always broken: - netlink: prevent potential spectre v1 gadgets - netfilter: fixes for SCTP connection tracking - mctp: struct sock lifetime fixes - eth: ravb: fix possible hang if RIS2_QFF1 happen - eth: tg3: resolve deadlock in tg3_reset_task() during EEH Misc: - Mat stepped out as MPTCP co-maintainer" * tag 'net-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (40 commits) net: mdio-mux-meson-g12a: force internal PHY off on mux switch docs: networking: Fix bridge documentation URL tsnep: Fix TX queue stop/wake for multiple queues net/tg3: resolve deadlock in tg3_reset_task() during EEH net: mctp: mark socks as dead on unhash, prevent re-add net: mctp: hold key reference when looking up a general key net: mctp: move expiry timer delete to unhash net: mctp: add an explicit reference from a mctp_sk_key to sock net: ravb: Fix possible hang if RIS2_QFF1 happen net: ravb: Fix lack of register setting after system resumed for Gen3 net/x25: Fix to not accept on connected socket ice: move devlink port creation/deletion sctp: fail if no bound addresses can be used for a given scope net/sched: sch_taprio: do not schedule in taprio_reset() Revert "Merge branch 'ethtool-mac-merge'" netrom: Fix use-after-free of a listening socket. netfilter: conntrack: unify established states for SCTP paths Revert "netfilter: conntrack: add sctp DATA_SENT state" netfilter: conntrack: fix bug in for_each_sctp_chunk netfilter: conntrack: fix vtag checks for ABORT/SHUTDOWN_COMPLETE ...
-
Linus Torvalds authored
I'm not exactly clear on what strange workflow causes people to do it, but clearly occasionally some files end up being committed as executable even though they clearly aren't. This is a reprise of commit 90fda63f ("treewide: fix up files incorrectly marked executable"), just with a different set of files (but with the same trivial shell scripting). So apparently we need to re-do this every five years or so, and Joe needs to just keep reminding me to do so ;) Reported-by: Joe Perches <joe@perches.com> Fixes: 523375c9 ("drm/vmwgfx: Port vmwgfx to arm64") Fixes: 5c439937 ("ASoC: codecs: add support for ES8326") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jerome Brunet authored
Force the internal PHY off then on when switching to the internal path. This fixes problems where the PHY ID is not properly set. Fixes: 70904251 ("net: phy: add amlogic g12a mdio mux support") Suggested-by: Qi Duan <qi.duan@amlogic.com> Co-developed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20230124101157.232234-1-jbrunet@baylibre.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Ivan Vecera authored
Current documentation URL [1] is no longer valid. [1] https://www.linuxfoundation.org/collaborate/workgroups/networking/bridgeSigned-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Link: https://lore.kernel.org/r/20230124145127.189221-1-ivecera@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Gerhard Engleder authored
netif_stop_queue() and netif_wake_queue() act on TX queue 0. This is ok as long as only a single TX queue is supported. But support for multiple TX queues was introduced with 76203137 and I missed to adapt stop and wake of TX queues. Use netif_stop_subqueue() and netif_tx_wake_queue() to act on specific TX queue. Fixes: 76203137 ("tsnep: Support multiple TX/RX queue pairs") Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Link: https://lore.kernel.org/r/20230124191440.56887-1-gerhard@engleder-embedded.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
David Christensen authored
During EEH error injection testing, a deadlock was encountered in the tg3 driver when tg3_io_error_detected() was attempting to cancel outstanding reset tasks: crash> foreach UN bt ... PID: 159 TASK: c0000000067c6000 CPU: 8 COMMAND: "eehd" ... #5 [c00000000681f990] __cancel_work_timer at c00000000019fd18 #6 [c00000000681fa30] tg3_io_error_detected at c00800000295f098 [tg3] #7 [c00000000681faf0] eeh_report_error at c00000000004e25c ... PID: 290 TASK: c000000036e5f800 CPU: 6 COMMAND: "kworker/6:1" ... #4 [c00000003721fbc0] rtnl_lock at c000000000c940d8 #5 [c00000003721fbe0] tg3_reset_task at c008000002969358 [tg3] #6 [c00000003721fc60] process_one_work at c00000000019e5c4 ... PID: 296 TASK: c000000037a65800 CPU: 21 COMMAND: "kworker/21:1" ... #4 [c000000037247bc0] rtnl_lock at c000000000c940d8 #5 [c000000037247be0] tg3_reset_task at c008000002969358 [tg3] #6 [c000000037247c60] process_one_work at c00000000019e5c4 ... PID: 655 TASK: c000000036f49000 CPU: 16 COMMAND: "kworker/16:2" ...:1 #4 [c0000000373ebbc0] rtnl_lock at c000000000c940d8 #5 [c0000000373ebbe0] tg3_reset_task at c008000002969358 [tg3] #6 [c0000000373ebc60] process_one_work at c00000000019e5c4 ... Code inspection shows that both tg3_io_error_detected() and tg3_reset_task() attempt to acquire the RTNL lock at the beginning of their code blocks. If tg3_reset_task() should happen to execute between the times when tg3_io_error_deteced() acquires the RTNL lock and tg3_reset_task_cancel() is called, a deadlock will occur. Moving tg3_reset_task_cancel() call earlier within the code block, prior to acquiring RTNL, prevents this from happening, but also exposes another deadlock issue where tg3_reset_task() may execute AFTER tg3_io_error_detected() has executed: crash> foreach UN bt PID: 159 TASK: c0000000067d2000 CPU: 9 COMMAND: "eehd" ... #4 [c000000006867a60] rtnl_lock at c000000000c940d8 #5 [c000000006867a80] tg3_io_slot_reset at c0080000026c2ea8 [tg3] #6 [c000000006867b00] eeh_report_reset at c00000000004de88 ... PID: 363 TASK: c000000037564000 CPU: 6 COMMAND: "kworker/6:1" ... #3 [c000000036c1bb70] msleep at c000000000259e6c #4 [c000000036c1bba0] napi_disable at c000000000c6b848 #5 [c000000036c1bbe0] tg3_reset_task at c0080000026d942c [tg3] #6 [c000000036c1bc60] process_one_work at c00000000019e5c4 ... This issue can be avoided by aborting tg3_reset_task() if EEH error recovery is already in progress. Fixes: db84bf43 ("tg3: tg3_reset_task() needs to use rtnl_lock to synchronize") Signed-off-by: David Christensen <drc@linux.vnet.ibm.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Link: https://lore.kernel.org/r/20230124185339.225806-1-drc@linux.vnet.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 25 Jan, 2023 18 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmappingLinus Torvalds authored
Pull fuse ACL fix from Christian Brauner: "The new posix acl API doesn't depend on the xattr handler infrastructure anymore and instead only relies on the posix acl inode operations. As a result daemons without FUSE_POSIX_ACL are unable to use posix acls like they used to. Fix this by copying what we did for overlayfs during the posix acl api conversion. Make fuse implement a dedicated ->get_inode_acl() method as does overlayfs. Fuse can then also uses this to express different needs for vfs permission checking during lookup and acl based retrieval via the regular system call path. This allows fuse to continue to refuse retrieving posix acls for daemons that don't set FUSE_POSXI_ACL for permission checking while also allowing a fuse server to retrieve it via the usual system calls" * tag 'fs.fuse.acl.v6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping: fuse: fixes after adapting to new posix acl api
-
David S. Miller authored
Jeremy Kerr says: ==================== net: mctp: struct sock lifetime fixes This series is a set of fixes for the sock lifetime handling in the AF_MCTP code, fixing a uaf reported by Noam Rathaus <noamr@ssd-disclosure.com>. The Fixes: tags indicate the original patches affected, but some tweaking to backport to those commits may be needed; I have a separate branch with backports to 5.15 if that helps with stable trees. Of course, any comments/queries most welcome. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jeremy Kerr authored
Once a socket has been unhashed, we want to prevent it from being re-used in a sk_key entry as part of a routing operation. This change marks the sk as SOCK_DEAD on unhash, which prevents addition into the net's key list. We need to do this during the key add path, rather than key lookup, as we release the net keys_lock between those operations. Fixes: 4a992bbd ("mctp: Implement message fragmentation & reassembly") Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
Currently, we have a race where we look up a sock through a "general" (ie, not directly associated with the (src,dest,tag) tuple) key, then drop the key reference while still holding the key's sock. This change expands the key reference until we've finished using the sock, and hence the sock reference too. Commit message changes from Jeremy Kerr <jk@codeconstruct.com.au>. Reported-by: Noam Rathaus <noamr@ssd-disclosure.com> Fixes: 73c61845 ("mctp: locking, lifetime and validity changes for sk_keys") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jeremy Kerr authored
Currently, we delete the key expiry timer (in sk->close) before unhashing the sk. This means that another thread may find the sk through its presence on the key list, and re-queue the timer. This change moves the timer deletion to the unhash, after we have made the key no longer observable, so the timer cannot be re-queued. Fixes: 7b14e15a ("mctp: Implement a timeout for tags") Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jeremy Kerr authored
Currently, we correlate the mctp_sk_key lifetime to the sock lifetime through the sock hash/unhash operations, but this is pretty tenuous, and there are cases where we may have a temporary reference to an unhashed sk. This change makes the reference more explicit, by adding a hold on the sock when it's associated with a mctp_sk_key, released on final key unref. Fixes: 73c61845 ("mctp: locking, lifetime and validity changes for sk_keys") Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Yoshihiro Shimoda says: ==================== net: ravb: Fix potential issues Fix potentiall issues on the ravb driver. Changes from v2: https://lore.kernel.org/all/20230123131331.1425648-1-yoshihiro.shimoda.uh@renesas.com/ - Add Reviewed-by in the patch [2/2]. - Add a commit description in the patch [2/2]. Changes from v1: https://lore.kernel.org/all/20230119043920.875280-1-yoshihiro.shimoda.uh@renesas.com/ - Fix typo in the patch [1/2]. - Add Reviewed-by in the patch [1/2]. - Fix "Fixed" tag in the patch [2/2]. - Fix a comment indentation of the code in the patch [2/2]. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yoshihiro Shimoda authored
Since this driver enables the interrupt by RIC2_QFE1, this driver should clear the interrupt flag if it happens. Otherwise, the interrupt causes to hang the system. Note that this also fix a minor coding style (a comment indentation) around the fixed code. Fixes: c156633f ("Renesas Ethernet AVB driver proper") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yoshihiro Shimoda authored
After system entered Suspend to RAM, registers setting of this hardware is reset because the SoC will be turned off. On R-Car Gen3 (info->ccc_gac), ravb_ptp_init() is called in ravb_probe() only. So, after system resumed, it lacks of the initial settings for ptp. So, add ravb_ptp_{init,stop}() into ravb_{resume,suspend}(). Fixes: f5d7837f ("ravb: ptp: Add CONFIG mode support") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hyunwoo Kim authored
When listen() and accept() are called on an x25 socket that connect() succeeds, accept() succeeds immediately. This is because x25_connect() queues the skb to sk->sk_receive_queue, and x25_accept() dequeues it. This creates a child socket with the sk of the parent x25 socket, which can cause confusion. Fix x25_listen() to return -EINVAL if the socket has already been successfully connect()ed to avoid this issue. Signed-off-by: Hyunwoo Kim <v4bel@theori.io> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Perform SCTP vtag verification for ABORT/SHUTDOWN_COMPLETE according to RFC 9260, Sect 8.5.1. 2) Fix infinite loop if SCTP chunk size is zero in for_each_sctp_chunk(). And remove useless check in this macro too. 3) Revert DATA_SENT state in the SCTP tracker, this was applied in the previous merge window. Next patch in this series provides a more simple approach to multihoming support. 4) Unify HEARTBEAT_ACKED and ESTABLISHED states for SCTP multihoming support, use default ESTABLISHED of 210 seconds based on heartbeat timeout * maximum number of retransmission + round-trip timeout. Otherwise, SCTP conntrack entry that represents secondary paths remain stale in the table for up to 5 days. This is a slightly large batch with fixes for the SCTP connection tracking helper, all patches from Sriram Yagnaraman. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: conntrack: unify established states for SCTP paths Revert "netfilter: conntrack: add sctp DATA_SENT state" netfilter: conntrack: fix bug in for_each_sctp_chunk netfilter: conntrack: fix vtag checks for ABORT/SHUTDOWN_COMPLETE ==================== Link: https://lore.kernel.org/r/20230124183933.4752-1-pablo@netfilter.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Paul M Stillwell Jr authored
Commit a286ba73 ("ice: reorder PF/representor devlink port register/unregister flows") moved the code to create and destroy the devlink PF port. This was fine, but created a corner case issue in the case of ice_register_netdev() failing. In that case, the driver would end up calling ice_devlink_destroy_pf_port() twice. Additionally, it makes no sense to tie creation of the devlink PF port to the creation of the netdev so separate out the code to create/destroy the devlink PF port from the netdev code. This makes it a cleaner interface. Fixes: a286ba73 ("ice: reorder PF/representor devlink port register/unregister flows") Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230124005714.3996270-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Marcelo Ricardo Leitner authored
Currently, if you bind the socket to something like: servaddr.sin6_family = AF_INET6; servaddr.sin6_port = htons(0); servaddr.sin6_scope_id = 0; inet_pton(AF_INET6, "::1", &servaddr.sin6_addr); And then request a connect to: connaddr.sin6_family = AF_INET6; connaddr.sin6_port = htons(20000); connaddr.sin6_scope_id = if_nametoindex("lo"); inet_pton(AF_INET6, "fe88::1", &connaddr.sin6_addr); What the stack does is: - bind the socket - create a new asoc - to handle the connect - copy the addresses that can be used for the given scope - try to connect But the copy returns 0 addresses, and the effect is that it ends up trying to connect as if the socket wasn't bound, which is not the desired behavior. This unexpected behavior also allows KASLR leaks through SCTP diag interface. The fix here then is, if when trying to copy the addresses that can be used for the scope used in connect() it returns 0 addresses, bail out. This is what TCP does with a similar reproducer. Reported-by: Pietro Borrello <borrello@diag.uniroma1.it> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/9fcd182f1099f86c6661f3717f63712ddd1c676c.1674496737.git.marcelo.leitner@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linuxLinus Torvalds authored
Pull module fix from Luis Chamberlain: "Theis is a fix we have been delaying for v6.2 due to lack of early testing on linux-next. The commit has been sitting in linux-next since December and testing has also been now a bit extensive by a few developers. Since this is a fix which definitely will go to v6.3 it should also apply to v6.2 so if there are any issues we pick them up earlier rather than later. The fix fixes a regression since v5.3, prior to me helping with module maintenance, however, the issue is real in that in the worst case now can prevent boot. We've discussed all possible corner cases [0] and at last do feel this is ready for v6.2-rc6" Link https://lore.kernel.org/all/Y9A4fiobL6IHp%2F%2FP@bombadil.infradead.org/ [0] * tag 'modules-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: module: Don't wait for GOING modules
-
Eric Dumazet authored
As reported by syzbot and hinted by Vinicius, I should not have added a qdisc_synchronize() call in taprio_reset() taprio_reset() can be called with qdisc spinlock held (and BH disabled) as shown in included syzbot report [1]. Only taprio_destroy() needed this synchronization, as explained in the blamed commit changelog. [1] BUG: scheduling while atomic: syz-executor150/5091/0x00000202 2 locks held by syz-executor150/5091: Modules linked in: Preemption disabled at: [<0000000000000000>] 0x0 Kernel panic - not syncing: scheduling while atomic: panic_on_warn set ... CPU: 1 PID: 5091 Comm: syz-executor150 Not tainted 6.2.0-rc3-syzkaller-00219-g010a74f5 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106 panic+0x2cc/0x626 kernel/panic.c:318 check_panic_on_warn.cold+0x19/0x35 kernel/panic.c:238 __schedule_bug.cold+0xd5/0xfe kernel/sched/core.c:5836 schedule_debug kernel/sched/core.c:5865 [inline] __schedule+0x34e4/0x5450 kernel/sched/core.c:6500 schedule+0xde/0x1b0 kernel/sched/core.c:6682 schedule_timeout+0x14e/0x2a0 kernel/time/timer.c:2167 schedule_timeout_uninterruptible kernel/time/timer.c:2201 [inline] msleep+0xb6/0x100 kernel/time/timer.c:2322 qdisc_synchronize include/net/sch_generic.h:1295 [inline] taprio_reset+0x93/0x270 net/sched/sch_taprio.c:1703 qdisc_reset+0x10c/0x770 net/sched/sch_generic.c:1022 dev_reset_queue+0x92/0x130 net/sched/sch_generic.c:1285 netdev_for_each_tx_queue include/linux/netdevice.h:2464 [inline] dev_deactivate_many+0x36d/0x9f0 net/sched/sch_generic.c:1351 dev_deactivate+0xed/0x1b0 net/sched/sch_generic.c:1374 qdisc_graft+0xe4a/0x1380 net/sched/sch_api.c:1080 tc_modify_qdisc+0xb6b/0x19a0 net/sched/sch_api.c:1689 rtnetlink_rcv_msg+0x43e/0xca0 net/core/rtnetlink.c:6141 netlink_rcv_skb+0x165/0x440 net/netlink/af_netlink.c:2564 netlink_unicast_kernel net/netlink/af_netlink.c:1330 [inline] netlink_unicast+0x547/0x7f0 net/netlink/af_netlink.c:1356 netlink_sendmsg+0x91b/0xe10 net/netlink/af_netlink.c:1932 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xd3/0x120 net/socket.c:734 ____sys_sendmsg+0x712/0x8c0 net/socket.c:2476 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2530 __sys_sendmsg+0xf7/0x1c0 net/socket.c:2559 do_syscall_x64 arch/x86/entry/common.c:50 [inline] Fixes: 3a415d59 ("net/sched: sch_taprio: fix possible use-after-free") Link: https://lore.kernel.org/netdev/167387581653.2747.13878941339893288655.git-patchwork-notify@kernel.org/T/Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/20230123084552.574396-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
https://github.com/Rust-for-Linux/linuxLinus Torvalds authored
Pull rust fix from Miguel Ojeda: - Avoid evaluating arguments in 'pr_*' macros in 'unsafe' blocks * tag 'rust-fixes-6.2' of https://github.com/Rust-for-Linux/linux: rust: print: avoid evaluating arguments in `pr_*` macros in `unsafe` blocks
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "ARM64: - Pass the correct address to mte_clear_page_tags() on initialising a tagged page - Plug a race against a GICv4.1 doorbell interrupt while saving the vgic-v3 pending state. x86: - A command line parsing fix and a clang compilation fix for selftests - A fix for a longstanding VMX issue, that surprisingly was only found now to affect real world guests" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: selftests: Make reclaim_period_ms input always be positive KVM: x86/vmx: Do not skip segment attributes if unusable bit is set selftests: kvm: move declaration at the beginning of main() KVM: arm64: GICv4.1: Fix race with doorbell on VPE activation/deactivation KVM: arm64: Pass the actual page address to mte_clear_page_tags()
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Six fixes, all in drivers. The biggest are the UFS devfreq fixes which address a lock inversion and the two iscsi_tcp fixes which try to prevent a use after free from userspace still accessing an area which the kernel has released (seen by KASAN)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: device_handler: alua: Remove a might_sleep() annotation scsi: iscsi_tcp: Fix UAF during login when accessing the shost ipaddress scsi: iscsi_tcp: Fix UAF during logout when accessing the shost ipaddress scsi: ufs: core: Fix devfreq deadlocks scsi: hpsa: Fix allocation size for scsi_host_alloc() scsi: target: core: Fix warning on RT kernels
-
- 24 Jan, 2023 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linuxLinus Torvalds authored
Pull nfsd fix from Chuck Lever: - Nail another UAF in NFSD's filecache * tag 'nfsd-6.2-5' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: nfsd: don't free files unconditionally in __nfsd_file_cache_purge
-
git://git.kernel.org/pub/scm/fs/fscrypt/linuxLinus Torvalds authored
Pull fscrypt MAINTAINERS entry update from Eric Biggers: "Update the MAINTAINERS file entry for fscrypt" * tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux: MAINTAINERS: update fscrypt git repo
-
Petr Pavlu authored
During a system boot, it can happen that the kernel receives a burst of requests to insert the same module but loading it eventually fails during its init call. For instance, udev can make a request to insert a frequency module for each individual CPU when another frequency module is already loaded which causes the init function of the new module to return an error. Since commit 6e6de3de ("kernel/module.c: Only return -EEXIST for modules that have finished loading"), the kernel waits for modules in MODULE_STATE_GOING state to finish unloading before making another attempt to load the same module. This creates unnecessary work in the described scenario and delays the boot. In the worst case, it can prevent udev from loading drivers for other devices and might cause timeouts of services waiting on them and subsequently a failed boot. This patch attempts a different solution for the problem 6e6de3de was trying to solve. Rather than waiting for the unloading to complete, it returns a different error code (-EBUSY) for modules in the GOING state. This should avoid the error situation that was described in 6e6de3de (user space attempting to load a dependent module because the -EEXIST error code would suggest to user space that the first module had been loaded successfully), while avoiding the delay situation too. This has been tested on linux-next since December 2022 and passes all kmod selftests except test 0009 with module compression enabled but it has been confirmed that this issue has existed and has gone unnoticed since prior to this commit and can also be reproduced without module compression with a simple usleep(5000000) on tools/modprobe.c [0]. These failures are caused by hitting the kernel mod_concurrent_max and can happen either due to a self inflicted kernel module auto-loead DoS somehow or on a system with large CPU count and each CPU count incorrectly triggering many module auto-loads. Both of those issues need to be fixed in-kernel. [0] https://lore.kernel.org/all/Y9A4fiobL6IHp%2F%2FP@bombadil.infradead.org/ Fixes: 6e6de3de ("kernel/module.c: Only return -EEXIST for modules that have finished loading") Co-developed-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> Cc: stable@vger.kernel.org Reviewed-by: Petr Mladek <pmladek@suse.com> [mcgrof: enhance commit log with testing and kmod test result interpretation ] Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
-
git://git.kernel.org/pub/scm/fs/fsverity/linuxLinus Torvalds authored
Pull fsverity MAINTAINERS entry update from Eric Biggers: "Update the MAINTAINERS file entry for fsverity" * tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux: MAINTAINERS: update fsverity git repo, list, and patchwork
-
Linus Torvalds authored
Commit f3bbac32 ("ext4: deal with legacy signed xattr name hash values") added a hashing function for the legacy case of having the xattr hash calculated using a signed 'char' type. It left the unsigned case alone, since it's all implicitly handled by the '-funsigned-char' compiler option. However, there's been some noise about back-porting it all into stable kernels that lack the '-funsigned-char', so let's just make that at least possible by making the whole 'this uses unsigned char' very explicit in the code itself. Whether such a back-port is really warranted or not, I'll leave to others, but at least together with this change it is technically sensible. Also, add a 'pr_warn_once()' for reporting the "hey, signedness for this hash calculation has changed" issue. Hopefully it never triggers except for that xfstests generic/454 test-case, but even if it does it's just good information to have. If for no other reason than "we can remove the legacy signed hash code entirely if nobody ever sees the message any more". Cc: Sasha Levin <sashal@kernel.org> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Andreas Dilger <adilger@dilger.ca> Cc: Theodore Ts'o <tytso@mit.edu>, Cc: Jason Donenfeld <Jason@zx2c4.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Paolo Abeni authored
This reverts commit 0ad999c1, reversing changes made to e38553bd. It was not intended for net. Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Christian Brauner authored
This cycle we ported all filesystems to the new posix acl api. While looking at further simplifications in this area to remove the last remnants of the generic dummy posix acl handlers we realized that we regressed fuse daemons that don't set FUSE_POSIX_ACL but still make use of posix acls. With the change to a dedicated posix acl api interacting with posix acls doesn't go through the old xattr codepaths anymore and instead only relies the get acl and set acl inode operations. Before this change fuse daemons that don't set FUSE_POSIX_ACL were able to get and set posix acl albeit with two caveats. First, that posix acls aren't cached. And second, that they aren't used for permission checking in the vfs. We regressed that use-case as we currently refuse to retrieve any posix acls if they aren't enabled via FUSE_POSIX_ACL. So older fuse daemons would see a change in behavior. We can restore the old behavior in multiple ways. We could change the new posix acl api and look for a dedicated xattr handler and if we find one prefer that over the dedicated posix acl api. That would break the consistency of the new posix acl api so we would very much prefer not to do that. We could introduce a new ACL_*_CACHE sentinel that would instruct the vfs permission checking codepath to not call into the filesystem and ignore acls. But a more straightforward fix for v6.2 is to do the same thing that Overlayfs does and give fuse a separate get acl method for permission checking. Overlayfs uses this to express different needs for vfs permission lookup and acl based retrieval via the regular system call path as well. Let fuse do the same for now. This way fuse can continue to refuse to retrieve posix acls for daemons that don't set FUSE_POSXI_ACL for permission checking while allowing a fuse server to retrieve it via the usual system calls. In the future, we could extend the get acl inode operation to not just pass a simple boolean to indicate rcu lookup but instead make it a flag argument. Then in addition to passing the information that this is an rcu lookup to the filesystem we could also introduce a flag that tells the filesystem that this is a request from the vfs to use these acls for permission checking. Then fuse could refuse the get acl request for permission checking when the daemon doesn't have FUSE_POSIX_ACL set in the same get acl method. This would also help Overlayfs and allow us to remove the second method for it as well. But since that change is more invasive as we need to update the get acl inode operation for multiple filesystems we should not do this as a fix for v6.2. Instead we will do this for the v6.3 merge window. Fwiw, since posix acls are now always correctly translated in the new posix acl api we could also allow them to be used for daemons without FUSE_POSIX_ACL that are not mounted on the host. But this is behavioral change and again if dones should be done for v6.3. For now, let's just restore the original behavior. A nice side-effect of this change is that for fuse daemons with and without FUSE_POSIX_ACL the same code is used for posix acls in a backwards compatible way. This also means we can remove the legacy xattr handlers completely. We've also added comments to explain the expected behavior for daemons without FUSE_POSIX_ACL into the code. Fixes: 318e6685 ("xattr: use posix acl api") Signed-off-by: Seth Forshee (Digital Ocean) <sforshee@kernel.org> Reviewed-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
-
Kuniyuki Iwashima authored
syzbot reported a use-after-free in do_accept(), precisely nr_accept() as sk_prot_alloc() allocated the memory and sock_put() frees it. [0] The issue could happen if the heartbeat timer is fired and nr_heartbeat_expiry() calls nr_destroy_socket(), where a socket has SOCK_DESTROY or a listening socket has SOCK_DEAD. In this case, the first condition cannot be true. SOCK_DESTROY is flagged in nr_release() only when the file descriptor is close()d, but accept() is being called for the listening socket, so the second condition must be true. Usually, the AF_NETROM listener neither starts timers nor sets SOCK_DEAD. However, the condition is met if connect() fails before listen(). connect() starts the t1 timer and heartbeat timer, and t1timer calls nr_disconnect() when timeout happens. Then, SOCK_DEAD is set, and if we call listen(), the heartbeat timer calls nr_destroy_socket(). nr_connect nr_establish_data_link(sk) nr_start_t1timer(sk) nr_start_heartbeat(sk) nr_t1timer_expiry nr_disconnect(sk, ETIMEDOUT) nr_sk(sk)->state = NR_STATE_0 sk->sk_state = TCP_CLOSE sock_set_flag(sk, SOCK_DEAD) nr_listen if (sk->sk_state != TCP_LISTEN) sk->sk_state = TCP_LISTEN nr_heartbeat_expiry switch (nr->state) case NR_STATE_0 if (sk->sk_state == TCP_LISTEN && sock_flag(sk, SOCK_DEAD)) nr_destroy_socket(sk) This path seems expected, and nr_destroy_socket() is called to clean up resources. Initially, there was sock_hold() before nr_destroy_socket() so that the socket would not be freed, but the commit 517a16b1 ("netrom: Decrease sock refcount when sock timers expire") accidentally removed it. To fix use-after-free, let's add sock_hold(). [0]: BUG: KASAN: use-after-free in do_accept+0x483/0x510 net/socket.c:1848 Read of size 8 at addr ffff88807978d398 by task syz-executor.3/5315 CPU: 0 PID: 5315 Comm: syz-executor.3 Not tainted 6.2.0-rc3-syzkaller-00165-gd9fc1511 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:306 [inline] print_report+0x15e/0x461 mm/kasan/report.c:417 kasan_report+0xbf/0x1f0 mm/kasan/report.c:517 do_accept+0x483/0x510 net/socket.c:1848 __sys_accept4_file net/socket.c:1897 [inline] __sys_accept4+0x9a/0x120 net/socket.c:1927 __do_sys_accept net/socket.c:1944 [inline] __se_sys_accept net/socket.c:1941 [inline] __x64_sys_accept+0x75/0xb0 net/socket.c:1941 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fa436a8c0c9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fa437784168 EFLAGS: 00000246 ORIG_RAX: 000000000000002b RAX: ffffffffffffffda RBX: 00007fa436bac050 RCX: 00007fa436a8c0c9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000005 RBP: 00007fa436ae7ae9 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffebc6700df R14: 00007fa437784300 R15: 0000000000022000 </TASK> Allocated by task 5294: kasan_save_stack+0x22/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 ____kasan_kmalloc mm/kasan/common.c:371 [inline] ____kasan_kmalloc mm/kasan/common.c:330 [inline] __kasan_kmalloc+0xa3/0xb0 mm/kasan/common.c:380 kasan_kmalloc include/linux/kasan.h:211 [inline] __do_kmalloc_node mm/slab_common.c:968 [inline] __kmalloc+0x5a/0xd0 mm/slab_common.c:981 kmalloc include/linux/slab.h:584 [inline] sk_prot_alloc+0x140/0x290 net/core/sock.c:2038 sk_alloc+0x3a/0x7a0 net/core/sock.c:2091 nr_create+0xb6/0x5f0 net/netrom/af_netrom.c:433 __sock_create+0x359/0x790 net/socket.c:1515 sock_create net/socket.c:1566 [inline] __sys_socket_create net/socket.c:1603 [inline] __sys_socket_create net/socket.c:1588 [inline] __sys_socket+0x133/0x250 net/socket.c:1636 __do_sys_socket net/socket.c:1649 [inline] __se_sys_socket net/socket.c:1647 [inline] __x64_sys_socket+0x73/0xb0 net/socket.c:1647 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 14: kasan_save_stack+0x22/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 kasan_save_free_info+0x2b/0x40 mm/kasan/generic.c:518 ____kasan_slab_free mm/kasan/common.c:236 [inline] ____kasan_slab_free+0x13b/0x1a0 mm/kasan/common.c:200 kasan_slab_free include/linux/kasan.h:177 [inline] __cache_free mm/slab.c:3394 [inline] __do_kmem_cache_free mm/slab.c:3580 [inline] __kmem_cache_free+0xcd/0x3b0 mm/slab.c:3587 sk_prot_free net/core/sock.c:2074 [inline] __sk_destruct+0x5df/0x750 net/core/sock.c:2166 sk_destruct net/core/sock.c:2181 [inline] __sk_free+0x175/0x460 net/core/sock.c:2192 sk_free+0x7c/0xa0 net/core/sock.c:2203 sock_put include/net/sock.h:1991 [inline] nr_heartbeat_expiry+0x1d7/0x460 net/netrom/nr_timer.c:148 call_timer_fn+0x1da/0x7c0 kernel/time/timer.c:1700 expire_timers+0x2c6/0x5c0 kernel/time/timer.c:1751 __run_timers kernel/time/timer.c:2022 [inline] __run_timers kernel/time/timer.c:1995 [inline] run_timer_softirq+0x326/0x910 kernel/time/timer.c:2035 __do_softirq+0x1fb/0xadc kernel/softirq.c:571 Fixes: 517a16b1 ("netrom: Decrease sock refcount when sock timers expire") Reported-by: syzbot+5fafd5cfe1fc91f6b352@syzkaller.appspotmail.com Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230120231927.51711-1-kuniyu@amazon.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Sriram Yagnaraman authored
An SCTP endpoint can start an association through a path and tear it down over another one. That means the initial path will not see the shutdown sequence, and the conntrack entry will remain in ESTABLISHED state for 5 days. By merging the HEARTBEAT_ACKED and ESTABLISHED states into one ESTABLISHED state, there remains no difference between a primary or secondary path. The timeout for the merged ESTABLISHED state is set to 210 seconds (hb_interval * max_path_retrans + rto_max). So, even if a path doesn't see the shutdown sequence, it will expire in a reasonable amount of time. With this change in place, there is now more than one state from which we can transition to ESTABLISHED, COOKIE_ECHOED and HEARTBEAT_SENT, so handle the setting of ASSURED bit whenever a state change has happened and the new state is ESTABLISHED. Removed the check for dir==REPLY since the transition to ESTABLISHED can happen only in the reply direction. Fixes: 9fb9cbb1 ("[NETFILTER]: Add nf_conntrack subsystem.") Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Sriram Yagnaraman authored
This reverts commit (bff3d053: "netfilter: conntrack: add sctp DATA_SENT state") Using DATA/SACK to detect a new connection on secondary/alternate paths works only on new connections, while a HEARTBEAT is required on connection re-use. It is probably consistent to wait for HEARTBEAT to create a secondary connection in conntrack. Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Sriram Yagnaraman authored
skb_header_pointer() will return NULL if offset + sizeof(_sch) exceeds skb->len, so this offset < skb->len test is redundant. if sch->length == 0, this will end up in an infinite loop, add a check for sch->length > 0 Fixes: 9fb9cbb1 ("[NETFILTER]: Add nf_conntrack subsystem.") Suggested-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-