We just want to hand the first bits of IO to the device as fast
as possible. Gains a few percent on the IOPS rate.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Empty barrier on write-through (or no cache) w/ ordered tag has no
command to execute and without any command to execute ordered tag is
never issued to the device and the ordering is never achieved.  Force
draining for such cases.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Empty barrier required special handling in __elv_next_request() to
complete it without letting the low level driver see it.

With previous changes, barrier code is now flexible enough to skip the
BAR step using the same barrier sequence selection mechanism.  Drop
the special handling and mask off q->ordered from start_ordered().

Remove blk_empty_barrier() test which now has no user.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Barrier completion had the following assumptions.

* start_ordered() couldn't finish the whole sequence properly.  If all
  actions are to be skipped, q->ordseq is set correctly but the actual
  completion was never triggered thus hanging the barrier request.

* Drain completion in elv_complete_request() assumed that there's
  always at least one request in the queue when drain completes.

Both assumptions are true but these assumptions need to be removed to
improve empty barrier implementation.  This patch makes the following
changes.

* Make start_ordered() use blk_ordered_complete_seq() to mark skipped
  steps complete and notify __elv_next_request() that it should fetch
  the next request if the whole barrier has completed inside
  start_ordered().

* Make drain completion path in elv_complete_request() check whether
  the queue is empty.  Empty queue also indicates drain completion.

* While at it, convert 0/1 return from blk_do_ordered() to false/true.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

In all barrier sequences, the barrier write itself was always assumed
to be issued and thus didn't have corresponding control flag.  This
patch adds QUEUE_ORDERED_DO_BAR and unify action mask handling in
start_ordered() such that any barrier action can be skipped.

This patch doesn't introduce any visible behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

* Because barrier mode can be changed dynamically, whether barrier is
  supported or not can be determined only when actually issuing the
  barrier and there is no point in checking it earlier.  Drop barrier
  support check in generic_make_request() and __make_request(), and
  update comment around the support check in blk_do_ordered().

* There is no reason to check discard support in both
  generic_make_request() and __make_request().  Drop the check in
  __make_request().  While at it, move error action block to the end
  of the function and add unlikely() to q existence test.

* Barrier request, be it empty or not, is never passed to low level
  driver and thus it's meaningless to try to copy back req->sector to
  bio->bi_sector on error.  In addition, the notion of failed sector
  doesn't make any sense for empty barrier to begin with.  Drop the
  code block from __end_that_request_first().
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Separate out ordering type (drain,) and action masks (preflush,
postflush, fua) from visible ordering mode selectors
(QUEUE_ORDERED_*).  Ordering types are now named QUEUE_ORDERED_BY_*
while action masks are named QUEUE_ORDERED_DO_*.

This change is necessary to add QUEUE_ORDERED_DO_BAR and make it
optional to improve empty barrier implementation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Remove 8 bytes of padding from struct bio which also removes 16 bytes from
struct bio_pair to make it 248 bytes.  bio_pair then fits into one fewer
cache lines & into a smaller slab.
Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

After many improvements on kblockd_flush_work, it is now identical to
cancel_work_sync, so a direct call to cancel_work_sync is suggested.

The only difference is that cancel_work_sync is a GPL symbol,
so no non-GPL modules anymore.
Signed-off-by: Cheng Renquan <crquan@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Allow the scsi request REQ_QUIET flag to be propagated to the buffer
file system layer. The basic ideas is to pass the flag from the scsi
request to the bio (block IO) and then to the buffer layer.  The buffer
layer can then suppress needless printks.

This patch declutters the kernel log by removed the 40-50 (per lun)
buffer io error messages seen during a boot in my multipath setup . It
is a good chance any real errors will be missed in the "noise" it the
logs without this patch.

During boot I see blocks of messages like
"
__ratelimit: 211 callbacks suppressed
Buffer I/O error on device sdm, logical block 5242879
Buffer I/O error on device sdm, logical block 5242879
Buffer I/O error on device sdm, logical block 5242847
Buffer I/O error on device sdm, logical block 1
Buffer I/O error on device sdm, logical block 5242878
Buffer I/O error on device sdm, logical block 5242879
Buffer I/O error on device sdm, logical block 5242879
Buffer I/O error on device sdm, logical block 5242879
Buffer I/O error on device sdm, logical block 5242879
Buffer I/O error on device sdm, logical block 5242872
"
in my logs.

My disk environment is multipath fiber channel using the SCSI_DH_RDAC
code and multipathd.  This topology includes an "active" and "ghost"
path for each lun. IO's to the "ghost" path will never complete and the
SCSI layer, via the scsi device handler rdac code, quick returns the IOs
to theses paths and sets the REQ_QUIET scsi flag to suppress the scsi
layer messages.

 I am wanting to extend the QUIET behavior to include the buffer file
system layer to deal with these errors as well. I have been running this
patch for a while now on several boxes without issue.  A few runs of
bonnie++ show no noticeable difference in performance in my setup.

Thanks for John Stultz for the quiet_error finalization.
Submitted-by: Keith Mannthey <kmannth@us.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

There's no need to take queue_lock or kernel_lock when modifying
bdi->ra_pages. So remove them. Also remove out of date comment for
queue_max_sectors_store().
Signed-off-by: Wu Fengguang <wfg@linux.intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

The drivers/block/ll_rw_block.c has been split and organized in the block/
directory, and also drivers/block/elevator.c has been moved to the block/
directory. Update Documentation/block/biodoc.txt accordingly
Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

There is no argument named @tags in blk_init_tags,
remove its' comment.
Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

This both cleans up the code and also helps detect the spurious case
of a command attempted being removed from a queue it doesn't belong
to.
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

When taking recursive faults in do_exit, if the io_context is not null,
exit_io_context() is being called. But it might decrement the refcount
more than once. It is better to leave this task alone.
Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

1. kmalloc 192 bytes in dvd_read_bca (which is inlined into dvd_read_struct)
2. Pass struct packet_command to all dvd_read_* functions.

Checkstack output:
Before: mmc_ioctl_dvd_read_struct:         280
After:  mmc_ioctl_dvd_read_struct:         56
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Checkstack output:

Before:
mmc_ioctl:                  584

After:
mmc_ioctl_dvd_read_struct:  280
mmc_ioctl_cdrom_subchannel: 152
mmc_ioctl_cdrom_read_data:  120
mmc_ioctl_cdrom_volume:     104
mmc_ioctl_cdrom_read_audio: 104
(mmc_ioctl is inlined into cdrom_ioctl - 104 bytes)
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Convert the timeout ioctl scalling to use the clock_t functions
which are much more accurate with some USER_HZ vs HZ combinations.
Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

For sync IO, we'll often do them serialized. This means we'll be touching
the queue timer for every IO, as opposed to only occasionally like we
do for queued IO. Instead of deleting the timer when the last request
is removed, just let continue running. If a new request comes up soon
we then don't have to readd the timer again. If no new requests arrive,
the timer will expire without side effect later.

This improves high iops sync IO by ~1%.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Now the rq->deadline can't be zero if the request is in the
timeout_list, so there is no need to have next_set. There is no need to
access a request's deadline field if blk_rq_timed_out is called on it.
Signed-off-by: Malahal Naineni <malahal@us.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Xen's blkfront sets noop as the default I/O scheduler at initialization
time to avoid elevator overheads such as idling, but with the advent of
basic disk profiling capabilities this is not necessary anymore. We
should just tell the block layer that we are a paravirt front-end driver
and the elevator will automatically make the necessary adjustments.
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

As a paravirt front-end driver, virtio_blk is not a rotational device so
we want do avoid idling in AS/CFQ. Tell the block layer about this.
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

As is the case with SSD devices, we do not want to idle in AS/CFQ when
the block device is a paravirt front-end driver. This patch adds a flag
(QUEUE_FLAG_VIRT) which should be used by front-end drivers such as
virtio_blk and xen-blkfront to indicate a paravirtualized device.
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (144 commits)
  powerpc/44x: Support 16K/64K base page sizes on 44x
  powerpc: Force memory size to be a multiple of PAGE_SIZE
  powerpc/32: Wire up the trampoline code for kdump
  powerpc/32: Add the ability for a classic ppc kernel to be loaded at 32M
  powerpc/32: Allow __ioremap on RAM addresses for kdump kernel
  powerpc/32: Setup OF properties for kdump
  powerpc/32/kdump: Implement crash_setup_regs() using ppc_save_regs()
  powerpc: Prepare xmon_save_regs for use with kdump
  powerpc: Remove default kexec/crash_kernel ops assignments
  powerpc: Make default kexec/crash_kernel ops implicit
  powerpc: Setup OF properties for ppc32 kexec
  powerpc/pseries: Fix cpu hotplug
  powerpc: Fix KVM build on ppc440
  powerpc/cell: add QPACE as a separate Cell platform
  powerpc/cell: fix build breakage with CONFIG_SPUFS disabled
  powerpc/mpc5200: fix error paths in PSC UART probe function
  powerpc/mpc5200: add rts/cts handling in PSC UART driver
  powerpc/mpc5200: Make PSC UART driver update serial errors counters
  powerpc/mpc5200: Remove obsolete code from mpc5200 MDIO driver
  powerpc/mpc5200: Add MDMA/UDMA support to MPC5200 ATA driver
  ...

Fix trivial conflict in drivers/char/Makefile as per Paul's directions

Commit 908a7a16 ("net: Remove unused
netdev arg from some NAPI interfaces") missed two spots.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  smackfs: check for allocation failures in smk_set_access()

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next: (25 commits)
  allow stripping of generated symbols under CONFIG_KALLSYMS_ALL
  kbuild: strip generated symbols from *.ko
  kbuild: simplify use of genksyms
  kernel-doc: check for extra kernel-doc notations
  kbuild: add headerdep used to detect inclusion cycles in header files
  kbuild: fix string equality testing in tags.sh
  kbuild: fix make tags/cscope
  kbuild: fix make incompatibility
  kbuild: remove TAR_IGNORE
  setlocalversion: add git-svn support
  setlocalversion: print correct subversion revision
  scripts: improve the decodecode script
  scripts/package: allow custom options to rpm
  genksyms: allow to ignore symbol checksum changes
  genksyms: track symbol checksum changes
  tags and cscope support really belongs in a shell script
  kconfig: fix options to check-lxdialog.sh
  kbuild: gen_init_cpio expands shell variables in file names
  remove bashisms from scripts/extract-ikconfig
  kbuild: teach mkmakfile to be silent
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-nvram:
  [PATCH] nvram - convert PRINT_PROC to seq_file
  [PATCH] nvram - CodingStyle

This adds support for 16k and 64k page sizes on PowerPC 44x processors.

The PGDIR table is much smaller than a page when using 16k or 64k
pages (512 and 32 bytes respectively) so we allocate the PGDIR with
kzalloc() instead of __get_free_pages().

One PTE table covers rather a large memory area when using 16k or 64k
pages (32MB or 512MB respectively), so we can easily put FIXMAP and
PKMAP in the area covered by one PTE table.
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Vladimir Panfilov <pvr@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Ensure that total memory size is page-aligned, because otherwise
mark_bootmem() gets upset.

This error case was triggered by using 64 KiB pages in the kernel
while arch/powerpc/boot/4xx.c arbitrarily reduced the amount of memory
by 4096 (to work around a chip bug that affects the last 256 bytes of
physical memory).
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: use the new byteorder headers
  fbcon: Protect free_irq() by MACH_IS_ATARI check
  fbcon: remove broken mac vbl handler
  m68k: fix trigraph ignored warning in setox.S
  macfb annotations and compiler warning fix
  m68k: mac baboon interrupt enable/disable
  m68k: machw.h cleanup
  m68k: Mac via cleanup and commentry
  m68k: Reinstate mac rtc

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1429 commits)
  net: Allow dependancies of FDDI & Tokenring to be modular.
  igb: Fix build warning when DCA is disabled.
  net: Fix warning fallout from recent NAPI interface changes.
  gro: Fix potential use after free
  sfc: If AN is enabled, always read speed/duplex from the AN advertising bits
  sfc: When disabling the NIC, close the device rather than unregistering it
  sfc: SFT9001: Add cable diagnostics
  sfc: Add support for multiple PHY self-tests
  sfc: Merge top-level functions for self-tests
  sfc: Clean up PHY mode management in loopback self-test
  sfc: Fix unreliable link detection in some loopback modes
  sfc: Generate unique names for per-NIC workqueues
  802.3ad: use standard ethhdr instead of ad_header
  802.3ad: generalize out mac address initializer
  802.3ad: initialize ports LACPDU from const initializer
  802.3ad: remove typedef around ad_system
  802.3ad: turn ports is_individual into a bool
  802.3ad: turn ports is_enabled into a bool
  802.3ad: make ntt bool
  ixgbe: Fix set_ringparam in ixgbe to use the same memory pools.
  ...

Fixed trivial IPv4/6 address printing conflicts in fs/cifs/connect.c due
to the conversion to %pI (in this networking merge) and the addition of
doing IPv6 addresses (from the earlier merge of CIFS).

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: (31 commits)
  [CIFS] Remove redundant test
  [CIFS] make sure that DFS pathnames are properly formed
  Remove an already-checked error condition in SendReceiveBlockingLock
  Streamline SendReceiveBlockingLock: Use "goto out:" in an error condition
  Streamline SendReceiveBlockingLock: Use "goto out:" in an error condition
  [CIFS] Streamline SendReceive[2] by using "goto out:" in an error condition
  Slightly streamline SendReceive[2]
  Check the return value of cifs_sign_smb[2]
  [CIFS] Cleanup: Move the check for too large R/W requests
  [CIFS] Slightly simplify wait_for_free_request(), remove an unnecessary "else" branch
  Simplify allocate_mid() slightly: Remove some unnecessary "else" branches
  [CIFS] In SendReceive, move consistency check out of the mutexed region
  cifs: store password in tcon
  cifs: have calc_lanman_hash take more granular args
  cifs: zero out session password before freeing it
  cifs: fix wait_for_response to time out sleeping processes correctly
  [CIFS] Can not mount with prefixpath if root directory of share is inaccessible
  [CIFS] various minor cleanups pointed out by checkpatch script
  [CIFS] fix typo
  [CIFS] remove sparse warning
  ...

Fix trivial conflict in fs/cifs/cifs_fs_sb.h due to comment changes for
the CIFS_MOUNT_xyz bit definitions between cifs updates and security
updates.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (26 commits)
  IB/mlx4: Set ownership bit correctly when copying CQEs during CQ resize
  RDMA/nes: Remove tx_free_list
  RDMA/cma: Add IPv6 support
  RDMA/addr: Add support for translating IPv6 addresses
  mlx4_core: Delete incorrect comment
  mlx4_core: Add support for multiple completion event vectors
  IB/iser: Avoid recv buffer exhaustion caused by unexpected PDUs
  IB/ehca: Remove redundant test of vpage
  IB/ehca: Replace modulus operations in flush error completion path
  IB/ipath: Add locking for interrupt use of ipath_pd contexts vs free
  IB/ipath: Fix spi_pioindex value
  IB/ipath: Only do 1X workaround on rev1 chips
  IB/ipath: Don't count IB symbol and link errors unless link is UP
  IB/ipath: Check return value of dma_map_single()
  IB/ipath: Fix PSN of send WQEs after an RDMA read resend
  RDMA/nes: Cleanup warnings
  RDMA/nes: Add loopback check to make_cm_node()
  RDMA/nes: Check cqp_avail_reqs is empty after locking the list
  RDMA/nes: Fix TCP compliance test failures
  RDMA/nes: Forward packets for a new connection with stale APBVT entry
  ...

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (85 commits)
  [S390] provide documentation for hvc_iucv kernel parameter.
  [S390] convert ctcm printks to dev_xxx and pr_xxx macros.
  [S390] convert zfcp printks to pr_xxx macros.
  [S390] convert vmlogrdr printks to pr_xxx macros.
  [S390] convert zfcp dumper printks to pr_xxx macros.
  [S390] convert cpu related printks to pr_xxx macros.
  [S390] convert qeth printks to dev_xxx and pr_xxx macros.
  [S390] convert sclp printks to pr_xxx macros.
  [S390] convert iucv printks to dev_xxx and pr_xxx macros.
  [S390] convert ap_bus printks to pr_xxx macros.
  [S390] convert dcssblk and extmem printks messages to pr_xxx macros.
  [S390] convert monwriter printks to pr_xxx macros.
  [S390] convert s390 debug feature printks to pr_xxx macros.
  [S390] convert monreader printks to pr_xxx macros.
  [S390] convert appldata printks to pr_xxx macros.
  [S390] convert setup printks to pr_xxx macros.
  [S390] convert hypfs printks to pr_xxx macros.
  [S390] convert time printks to pr_xxx macros.
  [S390] convert cpacf printks to pr_xxx macros.
  [S390] convert cio printks to pr_xxx macros.
  ...

Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (31 commits)
  sched: fix warning in fs/proc/base.c
  schedstat: consolidate per-task cpu runtime stats
  sched: use RCU variant of list traversal in for_each_leaf_rt_rq()
  sched, cpuacct: export percpu cpuacct cgroup stats
  sched, cpuacct: refactoring cpuusage_read / cpuusage_write
  sched: optimize update_curr()
  sched: fix wakeup preemption clock
  sched: add missing arch_update_cpu_topology() call
  sched: let arch_update_cpu_topology indicate if topology changed
  sched: idle_balance() does not call load_balance_newidle()
  sched: fix sd_parent_degenerate on non-numa smp machine
  sched: add uid information to sched_debug for CONFIG_USER_SCHED
  sched: move double_unlock_balance() higher
  sched: update comment for move_task_off_dead_cpu
  sched: fix inconsistency when redistribute per-cpu tg->cfs_rq shares
  sched/rt: removed unneeded defintion
  sched: add hierarchical accounting to cpu accounting controller
  sched: include group statistics in /proc/sched_debug
  sched: rename SCHED_NO_NO_OMIT_FRAME_POINTER => SCHED_OMIT_FRAME_POINTER
  sched: clean up SCHED_CPUMASK_ALLOC
  ...

Merge branch 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (241 commits)
  sched, trace: update trace_sched_wakeup()
  tracing/ftrace: don't trace on early stage of a secondary cpu boot, v3
  Revert "x86: disable X86_PTRACE_BTS"
  ring-buffer: prevent false positive warning
  ring-buffer: fix dangling commit race
  ftrace: enable format arguments checking
  x86, bts: memory accounting
  x86, bts: add fork and exit handling
  ftrace: introduce tracing_reset_online_cpus() helper
  tracing: fix warnings in kernel/trace/trace_sched_switch.c
  tracing: fix warning in kernel/trace/trace.c
  tracing/ring-buffer: remove unused ring_buffer size
  trace: fix task state printout
  ftrace: add not to regex on filtering functions
  trace: better use of stack_trace_enabled for boot up code
  trace: add a way to enable or disable the stack tracer
  x86: entry_64 - introduce FTRACE_ frame macro v2
  tracing/ftrace: add the printk-msg-only option
  tracing/ftrace: use preempt_enable_no_resched_notrace in ring_buffer_time_stamp()
  x86, bts: correctly report invalid bts records
  ...

Fixed up trivial conflict in scripts/recordmcount.pl due to SH bits
being already partly merged by the SH merge.